From: "Kevin D. Kissell" <kevink@mips.com>
To: "han han" <piggie111000@yahoo.com>, <linux-mips@oss.sgi.com>
Subject: Re: MIPS 32bit and 64bit mode
Date: Fri, 26 Oct 2001 19:54:37 +0200 [thread overview]
Message-ID: <038401c15e47$50331ae0$0deca8c0@Ulysses> (raw)
In-Reply-To: 20011026173004.78642.qmail@web10802.mail.yahoo.com
> Does Anybody help me to clear some concepts about MIPS
> 5kc?
> How to detect and set a MIPS 5kc chip working in 32bit
> or 64bit mode? or the chip can automatically enter
> proper mode when it fetchs an MIPS 32/64 instruction?
>
> Also, does MIPS 5kc have some 64bit instructions?
I guess somebody (probably me) need to write a
MIPS32/MIPS64 FAQ one of these days.
To answer your last question first, yes, the MIPS5Kc
has the full compliment of 64-bit integer instructions.
It does not have the integrated FPU of the 5Kf, however,
so you have neither 32-bit nor 64-bit FP instructions.
There are two kinds of "64-bit-ness" to consider:
64-bit data types and 64-bit addresses. In kernel
mode, a MIPS64 CPU always has access to 64-bit
data types, but to have 64-bit instructions in user
mode, one needs to explicitly enable them in the
CP0.Status register.
In pre-MIPS64 64-bit MIPS CPUs such as the
R4000 and R5000, user mode access to 64-bit
data types was only possible if 64-bit addressing
was also enabled for user mode by setting the
CP0.Status.UX bit. Kernel mode 64-bit addressing
is independently enabled by setting the CP0.Status.KX
bit. In MIPS64 (e.g. the 5Kc), it is also possible to enable
64-bit data types in user mode *without* 64-bit addressing
by setting the CP0.Status.PX bit (bit 23).
Regards,
Kevin K.
WARNING: multiple messages have this Message-ID (diff)
From: "Kevin D. Kissell" <kevink@mips.com>
To: han han <piggie111000@yahoo.com>, linux-mips@oss.sgi.com
Subject: Re: MIPS 32bit and 64bit mode
Date: Fri, 26 Oct 2001 19:54:37 +0200 [thread overview]
Message-ID: <038401c15e47$50331ae0$0deca8c0@Ulysses> (raw)
Message-ID: <20011026175437.c19b9_uKyfLWNWMcjQzpQ4jT1LxUu4p5yqUoSMeG-3A@z> (raw)
In-Reply-To: 20011026173004.78642.qmail@web10802.mail.yahoo.com
> Does Anybody help me to clear some concepts about MIPS
> 5kc?
> How to detect and set a MIPS 5kc chip working in 32bit
> or 64bit mode? or the chip can automatically enter
> proper mode when it fetchs an MIPS 32/64 instruction?
>
> Also, does MIPS 5kc have some 64bit instructions?
I guess somebody (probably me) need to write a
MIPS32/MIPS64 FAQ one of these days.
To answer your last question first, yes, the MIPS5Kc
has the full compliment of 64-bit integer instructions.
It does not have the integrated FPU of the 5Kf, however,
so you have neither 32-bit nor 64-bit FP instructions.
There are two kinds of "64-bit-ness" to consider:
64-bit data types and 64-bit addresses. In kernel
mode, a MIPS64 CPU always has access to 64-bit
data types, but to have 64-bit instructions in user
mode, one needs to explicitly enable them in the
CP0.Status register.
In pre-MIPS64 64-bit MIPS CPUs such as the
R4000 and R5000, user mode access to 64-bit
data types was only possible if 64-bit addressing
was also enabled for user mode by setting the
CP0.Status.UX bit. Kernel mode 64-bit addressing
is independently enabled by setting the CP0.Status.KX
bit. In MIPS64 (e.g. the 5Kc), it is also possible to enable
64-bit data types in user mode *without* 64-bit addressing
by setting the CP0.Status.PX bit (bit 23).
Regards,
Kevin K.
next prev parent reply other threads:[~2001-10-26 17:54 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-10-26 17:30 MIPS 32bit and 64bit mode han han
2001-10-26 17:54 ` Kevin D. Kissell [this message]
2001-10-26 17:54 ` Kevin D. Kissell
2001-10-26 18:54 ` han han
2001-10-26 19:42 ` Kevin D. Kissell
2001-10-26 19:42 ` Kevin D. Kissell
2001-10-26 17:54 ` George Gensure
2001-10-26 17:54 ` George Gensure
2001-10-26 18:05 ` Kevin D. Kissell
2001-10-26 18:05 ` Kevin D. Kissell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='038401c15e47$50331ae0$0deca8c0@Ulysses' \
--to=kevink@mips.com \
--cc=linux-mips@oss.sgi.com \
--cc=piggie111000@yahoo.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox