Linux MIPS Architecture development
 help / color / mirror / Atom feed
* HD Boot on Pb1500 Kernel 2.4.26
@ 2004-06-09 14:38 r.zilli
  2004-06-09 16:29 ` Pete Popov
  2004-06-14  6:00 ` Pete Popov
  0 siblings, 2 replies; 3+ messages in thread
From: r.zilli @ 2004-06-09 14:38 UTC (permalink / raw)
  To: linux-mips

Hi, list 

i've successful patched the 2.4.26 with v4l support to get the saa7134 
driver support on Alchemy Pb1500. The driver for the HPT370 is ok but the 
ide channels are not scanned and hard disk are not recognized. 

Thanks for any help 

zr 

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: HD Boot on Pb1500 Kernel 2.4.26
  2004-06-09 14:38 HD Boot on Pb1500 Kernel 2.4.26 r.zilli
@ 2004-06-09 16:29 ` Pete Popov
  2004-06-14  6:00 ` Pete Popov
  1 sibling, 0 replies; 3+ messages in thread
From: Pete Popov @ 2004-06-09 16:29 UTC (permalink / raw)
  To: r.zilli; +Cc: linux-mips

On Wed, 2004-06-09 at 07:38, r.zilli wrote:
> Hi, list 
> 
> i've successful patched the 2.4.26 with v4l support to get the saa7134 
> driver support on Alchemy Pb1500. The driver for the HPT370 is ok but the 
> ide channels are not scanned and hard disk are not recognized. 
> 
> Thanks for any help 

2.4.25 was fine. I haven't tried 2.4.26 yet to see if anything broke
during the merge. You're just using the ide controller on the Pb1500,
not an external PCI controller, right?

Pete

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: HD Boot on Pb1500 Kernel 2.4.26
  2004-06-09 14:38 HD Boot on Pb1500 Kernel 2.4.26 r.zilli
  2004-06-09 16:29 ` Pete Popov
@ 2004-06-14  6:00 ` Pete Popov
  1 sibling, 0 replies; 3+ messages in thread
From: Pete Popov @ 2004-06-14  6:00 UTC (permalink / raw)
  To: r.zilli; +Cc: linux-mips

On Wed, 2004-06-09 at 07:38, r.zilli wrote:
> Hi, list 
> 
> i've successful patched the 2.4.26 with v4l support to get the saa7134 
> driver support on Alchemy Pb1500. The driver for the HPT370 is ok but the 
> ide channels are not scanned and hard disk are not recognized. 

I just tried stock 2.4.26 from linux-mips on the Db1500 and the IDE
works fine for me. The Pb1500 should work as well. Try a stock kernel
without any additional patches you may be working on to make sure that's
not the problem.

Pete

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2004-06-14  6:01 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-06-09 14:38 HD Boot on Pb1500 Kernel 2.4.26 r.zilli
2004-06-09 16:29 ` Pete Popov
2004-06-14  6:00 ` Pete Popov

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox