From: Joe Perches <joe@perches.com>
To: linux-kernel@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>,
Ralf Baechle <ralf@linux-mips.org>,
linux-mips@linux-mips.org
Subject: [PATCH] arch/mips/: Spelling fixes
Date: Mon, 17 Dec 2007 11:30:08 -0800 [thread overview]
Message-ID: <1197919875-5288-9-git-send-email-joe@perches.com> (raw)
Message-ID: <5703e57f925f31fc0eb38873bd7f10fc44f99cb4.1197918889.git.joe@perches.com> (raw)
Signed-off-by: Joe Perches <joe@perches.com>
---
arch/mips/au1000/mtx-1/board_setup.c | 2 +-
arch/mips/kernel/binfmt_elfn32.c | 2 +-
arch/mips/kernel/binfmt_elfo32.c | 2 +-
arch/mips/kernel/kspd.c | 2 +-
arch/mips/kernel/setup.c | 4 ++--
arch/mips/kernel/smtc.c | 6 +++---
arch/mips/mm/c-r4k.c | 2 +-
arch/mips/sgi-ip27/ip27-hubio.c | 2 +-
8 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/arch/mips/au1000/mtx-1/board_setup.c b/arch/mips/au1000/mtx-1/board_setup.c
index abfc4bc..310d5df 100644
--- a/arch/mips/au1000/mtx-1/board_setup.c
+++ b/arch/mips/au1000/mtx-1/board_setup.c
@@ -99,7 +99,7 @@ mtx1_pci_idsel(unsigned int devsel, int assert)
#endif
if (assert && devsel != 0) {
- // supress signal to cardbus
+ // suppress signal to cardbus
au_writel( 0x00000002, SYS_OUTPUTCLR ); // set EXT_IO3 OFF
}
else {
diff --git a/arch/mips/kernel/binfmt_elfn32.c b/arch/mips/kernel/binfmt_elfn32.c
index 9b34238..77db347 100644
--- a/arch/mips/kernel/binfmt_elfn32.c
+++ b/arch/mips/kernel/binfmt_elfn32.c
@@ -98,7 +98,7 @@ static __inline__ void
jiffies_to_compat_timeval(unsigned long jiffies, struct compat_timeval *value)
{
/*
- * Convert jiffies to nanoseconds and seperate with
+ * Convert jiffies to nanoseconds and separate with
* one divide.
*/
u64 nsec = (u64)jiffies * TICK_NSEC;
diff --git a/arch/mips/kernel/binfmt_elfo32.c b/arch/mips/kernel/binfmt_elfo32.c
index da41eac..08f4cd7 100644
--- a/arch/mips/kernel/binfmt_elfo32.c
+++ b/arch/mips/kernel/binfmt_elfo32.c
@@ -100,7 +100,7 @@ static inline void
jiffies_to_compat_timeval(unsigned long jiffies, struct compat_timeval *value)
{
/*
- * Convert jiffies to nanoseconds and seperate with
+ * Convert jiffies to nanoseconds and separate with
* one divide.
*/
u64 nsec = (u64)jiffies * TICK_NSEC;
diff --git a/arch/mips/kernel/kspd.c b/arch/mips/kernel/kspd.c
index d2c2e00..1630784 100644
--- a/arch/mips/kernel/kspd.c
+++ b/arch/mips/kernel/kspd.c
@@ -222,7 +222,7 @@ void sp_work_handle_request(void)
}
}
- /* Run the syscall at the priviledge of the user who loaded the
+ /* Run the syscall at the privilege of the user who loaded the
SP program */
if (vpe_getuid(tclimit))
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 7f6ddcb..ddc2d6d 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -423,13 +423,13 @@ static void __init bootmem_init(void)
#endif /* CONFIG_SGI_IP27 */
/*
- * arch_mem_init - initialize memory managment subsystem
+ * arch_mem_init - initialize memory management subsystem
*
* o plat_mem_setup() detects the memory configuration and will record detected
* memory areas using add_memory_region.
*
* At this stage the memory configuration of the system is known to the
- * kernel but generic memory managment system is still entirely uninitialized.
+ * kernel but generic memory management system is still entirely uninitialized.
*
* o bootmem_init()
* o sparse_init()
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index 9c92d42..37ee189 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -66,7 +66,7 @@ asiduse smtc_live_asid[MAX_SMTC_TLBS][MAX_SMTC_ASIDS];
static atomic_t ipi_timer_latch[NR_CPUS];
/*
- * Number of InterProcessor Interupt (IPI) message buffers to allocate
+ * Number of InterProcessor Interrupt (IPI) message buffers to allocate
*/
#define IPIBUF_PER_CPU 4
@@ -781,7 +781,7 @@ void smtc_send_ipi(int cpu, int type, unsigned int action)
if (cpu_data[cpu].vpe_id != cpu_data[smp_processor_id()].vpe_id) {
if (type == SMTC_CLOCK_TICK)
atomic_inc(&ipi_timer_latch[cpu]);
- /* If not on same VPE, enqueue and send cross-VPE interupt */
+ /* If not on same VPE, enqueue and send cross-VPE interrupt */
smtc_ipi_nq(&IPIQ[cpu], pipi);
LOCK_CORE_PRA();
settc(cpu_data[cpu].tc_id);
@@ -1064,7 +1064,7 @@ static void setup_cross_vpe_interrupts(unsigned int nvpe)
return;
if (!cpu_has_vint)
- panic("SMTC Kernel requires Vectored Interupt support");
+ panic("SMTC Kernel requires Vectored Interrupt support");
set_vi_handler(MIPS_CPU_IPI_IRQ, ipi_irq_dispatch);
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 9355f1c..049ba7f 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -1108,7 +1108,7 @@ static void __init setup_scache(void)
/*
* Do the probing thing on R4000SC and R4400SC processors. Other
* processors don't have a S-cache that would be relevant to the
- * Linux memory managment.
+ * Linux memory management.
*/
switch (c->cputype) {
case CPU_R4000SC:
diff --git a/arch/mips/sgi-ip27/ip27-hubio.c b/arch/mips/sgi-ip27/ip27-hubio.c
index 524b371..a1fa4ab 100644
--- a/arch/mips/sgi-ip27/ip27-hubio.c
+++ b/arch/mips/sgi-ip27/ip27-hubio.c
@@ -168,7 +168,7 @@ static void hub_set_piomode(nasid_t nasid)
}
/*
- * hub_pio_init - PIO-related hub initalization
+ * hub_pio_init - PIO-related hub initialization
*
* @hub: hubinfo structure for our hub
*/
--
1.5.3.7.949.g2221a6
reply other threads:[~2007-12-17 19:32 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1197919875-5288-9-git-send-email-joe@perches.com \
--to=joe@perches.com \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox