[PATCH] Don't use ttyS* serial device name for board specific PNX8XXX UART serial

[Ihar Hrachyshka <ihar.hrachyshka@gmail.com>]

I think that's a better solution for the problem I said so please commit
this patch rather previous one...

---

Don't use ttyS[0-1] serial device name for board specific PNX8XXX UART
serial. Rather create ttyPNX[0-1]. Also changed minor number to be
different with sa1100 serial driver one.

Signed-off-by: Ihar Hrachyshka <ihar.hrachyshka@gmail.com>
---
 drivers/serial/pnx8xxx_uart.c |   11 +++++------
 1 files changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/serial/pnx8xxx_uart.c b/drivers/serial/pnx8xxx_uart.c
index 22e30d2..96870f1 100644
--- a/drivers/serial/pnx8xxx_uart.c
+++ b/drivers/serial/pnx8xxx_uart.c
@@ -34,9 +34,8 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 
-/* We'll be using StrongARM sa1100 serial port major/minor */
 #define SERIAL_PNX8XXX_MAJOR	204
-#define MINOR_START		5
+#define MINOR_START		96
 
 #define NR_PORTS		2
 
@@ -636,7 +635,7 @@ static struct uart_ops pnx8xxx_pops = {
 /*
  * Setup the PNX8XXX serial ports.
  *
- * Note also that we support "console=ttySx" where "x" is either 0 or 1.
+ * Note also that we support "console=ttyPNXx" where "x" is either 0 or 1.
  */
 static void __init pnx8xxx_init_ports(void)
 {
@@ -728,7 +727,7 @@ pnx8xxx_console_setup(struct console *co, char *options)
 
 static struct uart_driver pnx8xxx_reg;
 static struct console pnx8xxx_console = {
-	.name		= "ttyS",
+	.name		= "ttyPNX",
 	.write		= pnx8xxx_console_write,
 	.device		= uart_console_device,
 	.setup		= pnx8xxx_console_setup,
@@ -752,8 +751,8 @@ console_initcall(pnx8xxx_rs_console_init);
 
 static struct uart_driver pnx8xxx_reg = {
 	.owner			= THIS_MODULE,
-	.driver_name		= "ttyS",
-	.dev_name		= "ttyS",
+	.driver_name		= "ttyPNX",
+	.dev_name		= "ttyPNX",
 	.major			= SERIAL_PNX8XXX_MAJOR,
 	.minor			= MINOR_START,
 	.nr			= NR_PORTS,
-- 
1.5.6.3