Linux MIPS Architecture development
 help / color / mirror / Atom feed
From: Antony Pavlov <antonynpavlov@gmail.com>
To: linux-mips@linux-mips.org
Cc: Ralf Baechle <ralf@linux-mips.org>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Maarten ter Huurne <maarten@treewalker.org>,
	Antony Pavlov <antonynpavlov@gmail.com>
Subject: [RFC 05/13] MIPS: JZ4750D: Add clocksource/clockevent support
Date: Tue, 23 Oct 2012 21:43:53 +0400	[thread overview]
Message-ID: <1351014241-3207-6-git-send-email-antonynpavlov@gmail.com> (raw)
In-Reply-To: <1351014241-3207-1-git-send-email-antonynpavlov@gmail.com>

Add clocksource and clockevent support for the timer/counter unit on
JZ4750D SoCs.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
---
 arch/mips/jz4750d/time.c |  145 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 145 insertions(+)
 create mode 100644 arch/mips/jz4750d/time.c

diff --git a/arch/mips/jz4750d/time.c b/arch/mips/jz4750d/time.c
new file mode 100644
index 0000000..5df91e0
--- /dev/null
+++ b/arch/mips/jz4750d/time.c
@@ -0,0 +1,145 @@
+/*
+ *  Copyright (C) 2012, Antony Pavlov <antonynpavlov@gmail.com>
+ *  JZ4750D platform time support
+ *
+ *  based on JZ4740 platform time support
+ *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License as published by the
+ *  Free Software Foundation; either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/time.h>
+
+#include <linux/clockchips.h>
+
+#include <asm/time.h>
+
+#include "clock.h"
+#include "timer.h"
+
+#define TIMER_CLOCKEVENT 5
+
+static uint16_t jz4750d_jiffies_per_tick;
+
+static cycle_t jz4750d_clocksource_read(struct clocksource *cs)
+{
+	return (cycle_t)jz4750d_ostimer_get_count();
+}
+
+static struct clocksource jz4750d_clocksource = {
+	.name = "jz4750d-timer",
+	.rating = 200,
+	.read = jz4750d_clocksource_read,
+	.mask = CLOCKSOURCE_MASK(32),
+	.flags = CLOCK_SOURCE_WATCHDOG,
+};
+
+static irqreturn_t jz4750d_clockevent_irq(int irq, void *devid)
+{
+	struct clock_event_device *cd = devid;
+
+	jz4750d_timer_ack_full(TIMER_CLOCKEVENT);
+
+	if (cd->mode != CLOCK_EVT_MODE_PERIODIC)
+		jz4750d_timer_disable(TIMER_CLOCKEVENT);
+
+	cd->event_handler(cd);
+
+	return IRQ_HANDLED;
+}
+
+static void jz4750d_clockevent_set_mode(enum clock_event_mode mode,
+	struct clock_event_device *cd)
+{
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		jz4750d_timer_set_count(TIMER_CLOCKEVENT, 0);
+		jz4750d_timer_set_period(TIMER_CLOCKEVENT, jz4750d_jiffies_per_tick);
+	case CLOCK_EVT_MODE_RESUME:
+		jz4750d_timer_irq_full_enable(TIMER_CLOCKEVENT);
+		jz4750d_timer_enable(TIMER_CLOCKEVENT);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		jz4750d_timer_disable(TIMER_CLOCKEVENT);
+		break;
+	default:
+		break;
+	}
+}
+
+static int jz4750d_clockevent_set_next(unsigned long evt,
+	struct clock_event_device *cd)
+{
+	jz4750d_timer_set_count(TIMER_CLOCKEVENT, 0);
+	jz4750d_timer_set_period(TIMER_CLOCKEVENT, evt);
+	jz4750d_timer_enable(TIMER_CLOCKEVENT);
+
+	return 0;
+}
+
+static struct clock_event_device jz4750d_clockevent = {
+	.name = "jz4750d-timer",
+	.features = CLOCK_EVT_FEAT_PERIODIC,
+	.set_next_event = jz4750d_clockevent_set_next,
+	.set_mode = jz4750d_clockevent_set_mode,
+	.rating = 200,
+	.irq = JZ4750D_IRQ_TCU1,
+};
+
+static struct irqaction timer_irqaction = {
+	.handler = jz4750d_clockevent_irq,
+	.flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER,
+	.name = "jz4750d-timerirq",
+	.dev_id = &jz4750d_clockevent,
+};
+
+void __init plat_time_init(void)
+{
+	int ret;
+	uint32_t clk_rate;
+
+	jz4750d_timer_init();
+
+	clk_rate = jz4750d_clock_bdata.ext_rate >> 4;
+	jz4750d_jiffies_per_tick = DIV_ROUND_CLOSEST(clk_rate, HZ);
+
+	clockevent_set_clock(&jz4750d_clockevent, clk_rate);
+	jz4750d_clockevent.min_delta_ns =
+		clockevent_delta2ns(100, &jz4750d_clockevent);
+	jz4750d_clockevent.max_delta_ns =
+		clockevent_delta2ns(0xffff, &jz4750d_clockevent);
+	jz4750d_clockevent.cpumask = cpumask_of(0);
+
+	jz4750d_timer_irq_full_disable(TIMER_CLOCKEVENT);
+
+	clockevents_register_device(&jz4750d_clockevent);
+
+	ret = clocksource_register_hz(&jz4750d_clocksource, clk_rate);
+
+	if (ret)
+		printk(KERN_ERR "Failed to register clocksource: %d\n", ret);
+
+	setup_irq(JZ4750D_IRQ_TCU1, &timer_irqaction);
+
+	jz4750d_timer_set_ctrl(TIMER_CLOCKEVENT, JZ_TIMER_CTRL_PRESCALE_16
+		| JZ_TIMER_CTRL_SRC_EXT);
+	jz4750d_ostimer_set_ctrl(JZ_OSTIMER_CTRL_PRESCALE_16
+		| JZ_OSTIMER_CTRL_SRC_EXT);
+
+	jz4750d_timer_set_period(TIMER_CLOCKEVENT, jz4750d_jiffies_per_tick);
+	jz4750d_timer_irq_full_enable(TIMER_CLOCKEVENT);
+
+	jz4750d_ostimer_set_period(0xffffffff);
+
+	jz4750d_timer_enable(TIMER_CLOCKEVENT);
+	jz4750d_timer_start(TIMER_CLOCKEVENT);
+	jz4750d_ostimer_enable();
+	jz4750d_ostimer_start();
+}
-- 
1.7.10.4

  parent reply	other threads:[~2012-10-23 17:50 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-10-23 17:43 [RFC 00/13] MIPS: JZ4750D: Add base support for Ingenic JZ4750D SOC Antony Pavlov
2012-10-23 17:43 ` [RFC 01/13] MIPS: JZ4750D: Add base support for Ingenic JZ4750D System-on-a-Chip Antony Pavlov
2012-10-23 17:43 ` [RFC 02/13] MIPS: JZ4750D: Add clock API support Antony Pavlov
2012-10-23 17:43 ` [RFC 03/13] MIPS: JZ4750D: Add IRQ handler code Antony Pavlov
2012-10-23 17:43 ` [RFC 04/13] MIPS: JZ4750D: Add timer support Antony Pavlov
2012-10-23 17:43 ` Antony Pavlov [this message]
2012-10-23 17:43 ` [RFC 06/13] MIPS: JZ4750D: Add system reset support Antony Pavlov
2012-10-23 17:43 ` [RFC 07/13] MIPS: JZ4750D: Add setup code Antony Pavlov
2012-10-23 17:43 ` [RFC 08/13] MIPS: JZ4750D: Add serial support Antony Pavlov
2012-10-23 17:43 ` [RFC 09/13] MIPS: JZ4750D: Add prom support Antony Pavlov
2012-10-23 17:43 ` [RFC 10/13] MIPS: JZ4750D: Add platform UART devices Antony Pavlov
2012-10-23 17:43 ` [RFC 11/13] MIPS: JZ4750D: Add Kbuild files Antony Pavlov
2012-10-24 16:16   ` Maarten ter Huurne
2012-10-24 16:56     ` Ralf Baechle
2012-10-24 17:18     ` Antony Pavlov
2012-10-24 17:43     ` Florian Fainelli
2012-10-24 18:15       ` Maarten ter Huurne
2012-10-23 17:44 ` [RFC 12/13] MIPS: JZ4750D: Add rzx50 board support Antony Pavlov
2012-10-23 17:44 ` [RFC 13/13] MIPS: rzx50: Add defconfig file Antony Pavlov
2012-10-23 18:15 ` [RFC 00/13] MIPS: JZ4750D: Add base support for Ingenic JZ4750D SOC Lars-Peter Clausen
2012-10-23 19:57   ` Steven J. Hill
2012-10-24  8:25     ` Lars-Peter Clausen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1351014241-3207-6-git-send-email-antonynpavlov@gmail.com \
    --to=antonynpavlov@gmail.com \
    --cc=lars@metafoo.de \
    --cc=linux-mips@linux-mips.org \
    --cc=maarten@treewalker.org \
    --cc=ralf@linux-mips.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox