From: "Jayachandran C" <jchandra@broadcom.com>
To: ralf@linux-mips.org, linux-mips@linux-mips.org
Cc: "Jayachandran C" <jchandra@broadcom.com>
Subject: [PATCH 1/2] MIPS: Move definition of SMP processor id register to header file
Date: Sun, 11 Aug 2013 17:10:16 +0530 [thread overview]
Message-ID: <1376221217-9335-2-git-send-email-jchandra@broadcom.com> (raw)
In-Reply-To: <1376221217-9335-1-git-send-email-jchandra@broadcom.com>
The definition of the CP0 register used to save the smp processor
id is repicated in many files, move them all to thread_info.h.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
---
arch/mips/include/asm/mmu_context.h | 16 ++++------
arch/mips/include/asm/stackframe.h | 24 ++++-----------
arch/mips/include/asm/thread_info.h | 33 ++++++++++++++++++++-
arch/mips/mm/tlbex.c | 56 ++++-------------------------------
4 files changed, 49 insertions(+), 80 deletions(-)
diff --git a/arch/mips/include/asm/mmu_context.h b/arch/mips/include/asm/mmu_context.h
index 3b29079..ab8e260 100644
--- a/arch/mips/include/asm/mmu_context.h
+++ b/arch/mips/include/asm/mmu_context.h
@@ -35,10 +35,11 @@ do { \
#define TLBMISS_HANDLER_SETUP() \
do { \
TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir); \
- write_c0_xcontext((unsigned long) smp_processor_id() << 51); \
+ write_c0_xcontext((unsigned long) smp_processor_id() << \
+ SMP_CPUID_REGSHIFT); \
} while (0)
-#else /* CONFIG_MIPS_PGD_C0_CONTEXT: using pgd_current*/
+#else /* !CONFIG_MIPS_PGD_C0_CONTEXT: using pgd_current*/
/*
* For the fast tlb miss handlers, we keep a per cpu array of pointers
@@ -50,18 +51,11 @@ extern unsigned long pgd_current[];
#define TLBMISS_HANDLER_SETUP_PGD(pgd) \
pgd_current[smp_processor_id()] = (unsigned long)(pgd)
-#ifdef CONFIG_32BIT
#define TLBMISS_HANDLER_SETUP() \
- write_c0_context((unsigned long) smp_processor_id() << 25); \
+ write_c0_context((unsigned long) smp_processor_id() << \
+ SMP_CPUID_REGSHIFT); \
back_to_back_c0_hazard(); \
TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir)
-#endif
-#ifdef CONFIG_64BIT
-#define TLBMISS_HANDLER_SETUP() \
- write_c0_context((unsigned long) smp_processor_id() << 26); \
- back_to_back_c0_hazard(); \
- TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir)
-#endif
#endif /* CONFIG_MIPS_PGD_C0_CONTEXT*/
#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
diff --git a/arch/mips/include/asm/stackframe.h b/arch/mips/include/asm/stackframe.h
index 23fc95e..4857e2c 100644
--- a/arch/mips/include/asm/stackframe.h
+++ b/arch/mips/include/asm/stackframe.h
@@ -17,6 +17,7 @@
#include <asm/asmmacro.h>
#include <asm/mipsregs.h>
#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
/*
* For SMTC kernel, global IE should be left set, and interrupts
@@ -93,21 +94,8 @@
.endm
#ifdef CONFIG_SMP
-#ifdef CONFIG_MIPS_MT_SMTC
-#define PTEBASE_SHIFT 19 /* TCBIND */
-#define CPU_ID_REG CP0_TCBIND
-#define CPU_ID_MFC0 mfc0
-#elif defined(CONFIG_MIPS_PGD_C0_CONTEXT)
-#define PTEBASE_SHIFT 48 /* XCONTEXT */
-#define CPU_ID_REG CP0_XCONTEXT
-#define CPU_ID_MFC0 MFC0
-#else
-#define PTEBASE_SHIFT 23 /* CONTEXT */
-#define CPU_ID_REG CP0_CONTEXT
-#define CPU_ID_MFC0 MFC0
-#endif
.macro get_saved_sp /* SMP variation */
- CPU_ID_MFC0 k0, CPU_ID_REG
+ ASM_CPUID_MFC0 k0, ASM_SMP_CPUID_REG
#if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32)
lui k1, %hi(kernelsp)
#else
@@ -117,17 +105,17 @@
daddiu k1, %hi(kernelsp)
dsll k1, 16
#endif
- LONG_SRL k0, PTEBASE_SHIFT
+ LONG_SRL k0, SMP_CPUID_PTRSHIFT
LONG_ADDU k1, k0
LONG_L k1, %lo(kernelsp)(k1)
.endm
.macro set_saved_sp stackp temp temp2
- CPU_ID_MFC0 \temp, CPU_ID_REG
- LONG_SRL \temp, PTEBASE_SHIFT
+ ASM_CPUID_MFC0 \temp, ASM_SMP_CPUID_REG
+ LONG_SRL \temp, SMP_CPUID_PTRSHIFT
LONG_S \stackp, kernelsp(\temp)
.endm
-#else
+#else /* !CONFIG_SMP */
.macro get_saved_sp /* Uniprocessor variation */
#ifdef CONFIG_CPU_JUMP_WORKAROUNDS
/*
diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h
index 61215a3..e0c8cf3 100644
--- a/arch/mips/include/asm/thread_info.h
+++ b/arch/mips/include/asm/thread_info.h
@@ -147,6 +147,37 @@ static inline struct thread_info *current_thread_info(void)
#define _TIF_ALLWORK_MASK (_TIF_NOHZ | _TIF_WORK_MASK | \
_TIF_WORK_SYSCALL_EXIT)
-#endif /* __KERNEL__ */
+/*
+ * We stash processor id into a COP0 register to retrieve it fast
+ * at kernel exception entry.
+ */
+#if defined(CONFIG_MIPS_MT_SMTC)
+#define SMP_CPUID_REG 2, 2 /* TCBIND */
+#define ASM_SMP_CPUID_REG $2, 2
+#define SMP_CPUID_PTRSHIFT 19
+#elif defined(CONFIG_MIPS_PGD_C0_CONTEXT)
+#define SMP_CPUID_REG 20, 0 /* XCONTEXT */
+#define ASM_SMP_CPUID_REG $20
+#define SMP_CPUID_PTRSHIFT 48
+#else
+#define SMP_CPUID_REG 4, 0 /* CONTEXT */
+#define ASM_SMP_CPUID_REG $4
+#define SMP_CPUID_PTRSHIFT 23
+#endif
+#ifdef CONFIG_64BIT
+#define SMP_CPUID_REGSHIFT (SMP_CPUID_PTRSHIFT + 3)
+#else
+#define SMP_CPUID_REGSHIFT (SMP_CPUID_PTRSHIFT + 2)
+#endif
+
+#ifdef CONFIG_MIPS_MT_SMTC
+#define ASM_CPUID_MFC0 mfc0
+#define UASM_i_CPUID_MFC0 uasm_i_mfc0
+#else
+#define ASM_CPUID_MFC0 MFC0
+#define UASM_i_CPUID_MFC0 UASM_i_MFC0
+#endif
+
+#endif /* __KERNEL__ */
#endif /* _ASM_THREAD_INFO_H */
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 556cb48..54f3270 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -337,10 +337,6 @@ static struct work_registers build_get_work_registers(u32 **p)
{
struct work_registers r;
- int smp_processor_id_reg;
- int smp_processor_id_sel;
- int smp_processor_id_shift;
-
if (scratch_reg >= 0) {
/* Save in CPU local C0_KScratch? */
UASM_i_MTC0(p, 1, c0_kscratch(), scratch_reg);
@@ -351,25 +347,9 @@ static struct work_registers build_get_work_registers(u32 **p)
}
if (num_possible_cpus() > 1) {
-#ifdef CONFIG_MIPS_PGD_C0_CONTEXT
- smp_processor_id_shift = 51;
- smp_processor_id_reg = 20; /* XContext */
- smp_processor_id_sel = 0;
-#else
-# ifdef CONFIG_32BIT
- smp_processor_id_shift = 25;
- smp_processor_id_reg = 4; /* Context */
- smp_processor_id_sel = 0;
-# endif
-# ifdef CONFIG_64BIT
- smp_processor_id_shift = 26;
- smp_processor_id_reg = 4; /* Context */
- smp_processor_id_sel = 0;
-# endif
-#endif
/* Get smp_processor_id */
- UASM_i_MFC0(p, K0, smp_processor_id_reg, smp_processor_id_sel);
- UASM_i_SRL_SAFE(p, K0, K0, smp_processor_id_shift);
+ UASM_i_CPUID_MFC0(p, K0, SMP_CPUID_REG);
+ UASM_i_SRL_SAFE(p, K0, K0, SMP_CPUID_REGSHIFT);
/* handler_reg_save index in K0 */
UASM_i_SLL(p, K0, K0, ilog2(sizeof(struct tlb_reg_save)));
@@ -834,20 +814,8 @@ build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
uasm_i_drotr(p, ptr, ptr, 11);
}
#elif defined(CONFIG_SMP)
-# ifdef CONFIG_MIPS_MT_SMTC
- /*
- * SMTC uses TCBind value as "CPU" index
- */
- uasm_i_mfc0(p, ptr, C0_TCBIND);
- uasm_i_dsrl_safe(p, ptr, ptr, 19);
-# else
- /*
- * 64 bit SMP running in XKPHYS has smp_processor_id() << 3
- * stored in CONTEXT.
- */
- uasm_i_dmfc0(p, ptr, C0_CONTEXT);
- uasm_i_dsrl_safe(p, ptr, ptr, 23);
-# endif
+ UASM_i_CPUID_MFC0(p, ptr, SMP_CPUID_REG);
+ uasm_i_dsrl_safe(p, ptr, ptr, SMP_CPUID_PTRSHIFT);
UASM_i_LA_mostly(p, tmp, pgdc);
uasm_i_daddu(p, ptr, ptr, tmp);
uasm_i_dmfc0(p, tmp, C0_BADVADDR);
@@ -954,21 +922,9 @@ build_get_pgde32(u32 **p, unsigned int tmp, unsigned int ptr)
/* 32 bit SMP has smp_processor_id() stored in CONTEXT. */
#ifdef CONFIG_SMP
-#ifdef CONFIG_MIPS_MT_SMTC
- /*
- * SMTC uses TCBind value as "CPU" index
- */
- uasm_i_mfc0(p, ptr, C0_TCBIND);
+ uasm_i_mfc0(p, ptr, SMP_CPUID_REG);
UASM_i_LA_mostly(p, tmp, pgdc);
- uasm_i_srl(p, ptr, ptr, 19);
-#else
- /*
- * smp_processor_id() << 2 is stored in CONTEXT.
- */
- uasm_i_mfc0(p, ptr, C0_CONTEXT);
- UASM_i_LA_mostly(p, tmp, pgdc);
- uasm_i_srl(p, ptr, ptr, 23);
-#endif
+ uasm_i_srl(p, ptr, ptr, SMP_CPUID_PTRSHIFT);
uasm_i_addu(p, ptr, tmp, ptr);
#else
UASM_i_LA_mostly(p, ptr, pgdc);
--
1.7.9.5
next prev parent reply other threads:[~2013-08-11 11:40 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-11 11:40 [PATCH 0/2] Use scratch register for PGD when MIPS_PGD_C0_CONTEXT is not set Jayachandran C
2013-08-11 11:40 ` Jayachandran C [this message]
2013-08-11 11:40 ` [PATCH 2/2] MIPS: mm: Use scratch for PGD when !CONFIG_MIPS_PGD_C0_CONTEXT Jayachandran C
2013-09-17 21:21 ` Ralf Baechle
2013-09-18 7:59 ` Jayachandran C.
2013-09-18 11:02 ` Ralf Baechle
2013-09-24 21:49 ` Hauke Mehrtens
2013-09-25 5:26 ` Jayachandran C.
2013-09-25 8:25 ` Hauke Mehrtens
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1376221217-9335-2-git-send-email-jchandra@broadcom.com \
--to=jchandra@broadcom.com \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox