From: Huacai Chen <chenhc@lemote.com>
To: Ralf Baechle <ralf@linux-mips.org>
Cc: John Crispin <john@phrozen.org>,
linux-mips@linux-mips.org, Fuxin Zhang <zhangfx@lemote.com>,
Zhangjin Wu <wuzhangjin@gmail.com>,
Huacai Chen <chenhc@lemote.com>, Hongliang Tao <taohl@lemote.com>,
Hua Yan <yanh@lemote.com>
Subject: [PATCH V12 01/12] MIPS: Loongson: Add basic Loongson-3 definition
Date: Wed, 25 Sep 2013 17:15:35 +0800 [thread overview]
Message-ID: <1380100546-8302-2-git-send-email-chenhc@lemote.com> (raw)
In-Reply-To: <1380100546-8302-1-git-send-email-chenhc@lemote.com>
Loongson-3 is a multi-core MIPS family CPU, it support MIPS64R2 fully.
Loongson-3 has the same IMP field (0x6300) as Loongson-2.
Loongson-3 has a hardware-maintained cache, system software doesn't
need to maintain coherency.
Loongson-3A is the first revision of Loongson-3, and it is the quad-
core version of Loongson-2G. Loongson-3A has a simplified version named
Loongson-2Gq, the main difference between Loongson-3A/2Gq is 3A has two
HyperTransport controller but 2Gq has only one. HT0 is used for cross-
chip interconnection and HT1 is used to link PCI bus. Therefore, 2Gq
cannot support NUMA but 3A can. For software, Loongson-2Gq is simply
identified as Loongson-3A.
Exsisting Loongson family CPUs:
Loongson-1: Loongson-1A, Loongson-1B, they are 32-bit MIPS CPUs.
Loongson-2: Loongson-2E, Loongson-2F, Loongson-2G, they are 64-bit
single-core MIPS CPUs.
Loongson-3: Loongson-3A(including so-called Loongson-2Gq), they are
64-bit multi-core MIPS CPUs.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Hongliang Tao <taohl@lemote.com>
Signed-off-by: Hua Yan <yanh@lemote.com>
---
arch/mips/include/asm/addrspace.h | 6 ++++++
arch/mips/include/asm/cpu.h | 5 +++--
arch/mips/include/asm/mach-loongson/spaces.h | 15 +++++++++++++++
arch/mips/include/asm/module.h | 2 ++
arch/mips/include/asm/pgtable-bits.h | 7 +++++++
arch/mips/loongson/Platform | 1 +
6 files changed, 34 insertions(+), 2 deletions(-)
create mode 100644 arch/mips/include/asm/mach-loongson/spaces.h
diff --git a/arch/mips/include/asm/addrspace.h b/arch/mips/include/asm/addrspace.h
index 13d61c0..fdbadf3 100644
--- a/arch/mips/include/asm/addrspace.h
+++ b/arch/mips/include/asm/addrspace.h
@@ -116,7 +116,13 @@
#define K_CALG_UNCACHED 2
#define K_CALG_NONCOHERENT 3
#define K_CALG_COH_EXCL 4
+
+#ifdef CONFIG_CPU_LOONGSON3
+#define K_CALG_COH_SHAREABLE 3
+#else
#define K_CALG_COH_SHAREABLE 5
+#endif
+
#define K_CALG_NOTUSED 6
#define K_CALG_UNCACHED_ACCEL 7
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index d2035e1..7fffaf1 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -224,6 +224,7 @@
#define PRID_REV_LOONGSON1B 0x0020
#define PRID_REV_LOONGSON2E 0x0002
#define PRID_REV_LOONGSON2F 0x0003
+#define PRID_REV_LOONGSON3A 0x0005
/*
* Older processors used to encode processor version and revision in two
@@ -295,8 +296,8 @@ enum cpu_type_enum {
* MIPS64 class processors
*/
CPU_5KC, CPU_5KE, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2,
- CPU_CAVIUM_OCTEON, CPU_CAVIUM_OCTEON_PLUS, CPU_CAVIUM_OCTEON2,
- CPU_CAVIUM_OCTEON3, CPU_XLR, CPU_XLP,
+ CPU_LOONGSON3, CPU_CAVIUM_OCTEON, CPU_CAVIUM_OCTEON_PLUS,
+ CPU_CAVIUM_OCTEON2, CPU_CAVIUM_OCTEON3, CPU_XLR, CPU_XLP,
CPU_LAST
};
diff --git a/arch/mips/include/asm/mach-loongson/spaces.h b/arch/mips/include/asm/mach-loongson/spaces.h
new file mode 100644
index 0000000..1e82804
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson/spaces.h
@@ -0,0 +1,15 @@
+#ifndef __ASM_MACH_LOONGSON_SPACES_H_
+#define __ASM_MACH_LOONGSON_SPACES_H_
+
+#ifndef CAC_BASE
+#if defined(CONFIG_64BIT)
+#if defined(CONFIG_DMA_NONCOHERENT) || defined(CONFIG_CPU_LOONGSON3)
+#define CAC_BASE _AC(0x9800000000000000, UL)
+#else
+#define CAC_BASE _AC(0xa800000000000000, UL)
+#endif /* CONFIG_DMA_NONCOHERENT || CONFIG_CPU_LOONGSON3 */
+#endif /* CONFIG_64BIT */
+#endif /* CONFIG_CAC_BASE */
+
+#include <asm/mach-generic/spaces.h>
+#endif
diff --git a/arch/mips/include/asm/module.h b/arch/mips/include/asm/module.h
index 44b705d..c2edae3 100644
--- a/arch/mips/include/asm/module.h
+++ b/arch/mips/include/asm/module.h
@@ -126,6 +126,8 @@ search_module_dbetables(unsigned long addr)
#define MODULE_PROC_FAMILY "LOONGSON1 "
#elif defined CONFIG_CPU_LOONGSON2
#define MODULE_PROC_FAMILY "LOONGSON2 "
+#elif defined CONFIG_CPU_LOONGSON3
+#define MODULE_PROC_FAMILY "LOONGSON3 "
#elif defined CONFIG_CPU_CAVIUM_OCTEON
#define MODULE_PROC_FAMILY "OCTEON "
#elif defined CONFIG_CPU_XLR
diff --git a/arch/mips/include/asm/pgtable-bits.h b/arch/mips/include/asm/pgtable-bits.h
index 32aea48..6c1e99e 100644
--- a/arch/mips/include/asm/pgtable-bits.h
+++ b/arch/mips/include/asm/pgtable-bits.h
@@ -235,6 +235,13 @@ static inline uint64_t pte_to_entrylo(unsigned long pte_val)
#define _CACHE_CACHABLE_NONCOHERENT (5<<_CACHE_SHIFT)
#define _CACHE_UNCACHED_ACCELERATED (7<<_CACHE_SHIFT)
+#elif defined(CONFIG_CPU_LOONGSON3)
+
+#define _CACHE_UNCACHED (2<<_CACHE_SHIFT) /* LOONGSON */
+#define _CACHE_CACHABLE_NONCOHERENT (3<<_CACHE_SHIFT) /* LOONGSON */
+#define _CACHE_CACHABLE_COHERENT (3<<_CACHE_SHIFT) /* LOONGSON-3 */
+#define _CACHE_UNCACHED_ACCELERATED (7<<_CACHE_SHIFT) /* LOONGSON */
+
#else
#define _CACHE_CACHABLE_NO_WA (0<<_CACHE_SHIFT) /* R4600 only */
diff --git a/arch/mips/loongson/Platform b/arch/mips/loongson/Platform
index 29692e5..6205372 100644
--- a/arch/mips/loongson/Platform
+++ b/arch/mips/loongson/Platform
@@ -30,3 +30,4 @@ platform-$(CONFIG_MACH_LOONGSON) += loongson/
cflags-$(CONFIG_MACH_LOONGSON) += -I$(srctree)/arch/mips/include/asm/mach-loongson -mno-branch-likely
load-$(CONFIG_LEMOTE_FULOONG2E) += 0xffffffff80100000
load-$(CONFIG_LEMOTE_MACH2F) += 0xffffffff80200000
+load-$(CONFIG_CPU_LOONGSON3) += 0xffffffff80200000
--
1.7.7.3
next prev parent reply other threads:[~2013-09-25 9:16 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-25 9:15 [PATCH V12 00/13] MIPS: Add Loongson-3 based machines support Huacai Chen
2013-09-25 9:15 ` Huacai Chen [this message]
2013-09-25 21:17 ` [PATCH V12 01/12] MIPS: Loongson: Add basic Loongson-3 definition David Daney
2013-09-25 9:15 ` [PATCH V12 02/12] MIPS: Loongson: Add basic Loongson-3 CPU support Huacai Chen
2013-09-25 9:15 ` [PATCH V12 03/12] MIPS: Loongson 3: Add Lemote-3A machtypes definition Huacai Chen
2013-09-25 9:15 ` [PATCH V12 04/12] MIPS: Loongson: Add UEFI-like firmware interface support Huacai Chen
2013-09-25 9:15 ` [PATCH V12 05/12] MIPS: Loongson 3: Add HT-linked PCI support Huacai Chen
2013-09-25 9:15 ` [PATCH V12 06/12] MIPS: Loongson 3: Add IRQ init and dispatch support Huacai Chen
2013-09-25 9:15 ` [PATCH V12 07/12] MIPS: Loongson 3: Add serial port support Huacai Chen
2013-09-25 9:15 ` [PATCH V12 08/12] MIPS: Loongson: Add swiotlb to support big memory (>4GB) Huacai Chen
2013-09-25 9:15 ` [PATCH V12 09/12] MIPS: Loongson: Add Loongson-3 Kconfig options Huacai Chen
2013-09-25 21:20 ` David Daney
2013-09-25 9:15 ` [PATCH V12 10/12] MIPS: Loongson 3: Add Loongson-3 SMP support Huacai Chen
2013-09-25 9:15 ` [PATCH V12 11/12] MIPS: Loongson 3: Add CPU hotplug support Huacai Chen
2013-09-25 9:15 ` [PATCH V12 12/12] MIPS: Loongson: Add a Loongson-3 default config file Huacai Chen
2013-09-26 12:45 ` [PATCH V12 00/13] MIPS: Add Loongson-3 based machines support Ralf Baechle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1380100546-8302-2-git-send-email-chenhc@lemote.com \
--to=chenhc@lemote.com \
--cc=john@phrozen.org \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
--cc=taohl@lemote.com \
--cc=wuzhangjin@gmail.com \
--cc=yanh@lemote.com \
--cc=zhangfx@lemote.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox