[PATCH] MIPS:wrong usage of l_exc_copy in octeon-memcpy.S

["jianchao.wang" <jianchao.wan9@gmail.com>]

l_exc_copy() is usually to be used like this:
1 EXC(	LOAD	t0, UNIT(0)(src),	l_exc)
2 EXC(	LOAD	t1, UNIT(1)(src),	l_exc_copy)
3 EXC(	LOAD	t2, UNIT(2)(src),	l_exc_copy)
4 EXC(	LOAD	t3, UNIT(3)(src),	l_exc_copy)
When the fault occurs on row 4, l_exc_copy will get the bad
addr through THREAD_BUADDR(), complete the copy of row
1,2 and 3, and then return the len that has not been copied.
l_exc_copy assumes the src is smaller thann the bad addr.It will
increase src by 1 until reach the bad addr.

octeon-memcpy.S use the l_exc_copy with wrong way which make src
could be greater than bad addr. We will fix it in this patch.
We add the max offset of LOAD to 15 here to fix the issue without
adding new commands . Howerver, the side effect is that, when LOAD
fails in few case, l_exc_copy has to copy more.

Signed-off-by: jianchao.wang <jianchao.wan9@gmail.com>
---
 arch/mips/cavium-octeon/octeon-memcpy.S | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/arch/mips/cavium-octeon/octeon-memcpy.S b/arch/mips/cavium-octeon/octeon-memcpy.S
index 64e08df..b0fe98e 100644
--- a/arch/mips/cavium-octeon/octeon-memcpy.S
+++ b/arch/mips/cavium-octeon/octeon-memcpy.S
@@ -205,22 +205,22 @@ EXC(	LOAD	t3, UNIT(7)(src),	l_exc_copy)
 EXC(	STORE	t0, UNIT(4)(dst),	s_exc_p12u)
 EXC(	STORE	t1, UNIT(5)(dst),	s_exc_p11u)
 EXC(	STORE	t2, UNIT(6)(dst),	s_exc_p10u)
-	ADD	src, src, 16*NBYTES
 EXC(	STORE	t3, UNIT(7)(dst),	s_exc_p9u)
+EXC(	LOAD	t0, UNIT(8)(src),	l_exc_copy)
+EXC(	LOAD	t1, UNIT(9)(src),	l_exc_copy)
+EXC(	LOAD	t2, UNIT(10)(src),	l_exc_copy)
+EXC(	LOAD	t3, UNIT(11)(src),	l_exc_copy)
+EXC(	STORE	t0, UNIT(8)(dst),	s_exc_p8u)
+EXC(	STORE	t1, UNIT(9)(dst),	s_exc_p7u)
+EXC(	STORE	t2, UNIT(10)(dst),	s_exc_p6u)
+EXC(	STORE	t3, UNIT(11)(dst),	s_exc_p5u)
+EXC(	LOAD	t0, UNIT(12)(src),	l_exc_copy)
+EXC(	LOAD	t1, UNIT(13)(src),	l_exc_copy)
+EXC(	LOAD	t2, UNIT(14)(src),	l_exc_copy)
+EXC(	LOAD	t3, UNIT(15)(src),	l_exc_copy)
 	ADD	dst, dst, 16*NBYTES
-EXC(	LOAD	t0, UNIT(-8)(src),	l_exc_copy)
-EXC(	LOAD	t1, UNIT(-7)(src),	l_exc_copy)
-EXC(	LOAD	t2, UNIT(-6)(src),	l_exc_copy)
-EXC(	LOAD	t3, UNIT(-5)(src),	l_exc_copy)
-EXC(	STORE	t0, UNIT(-8)(dst),	s_exc_p8u)
-EXC(	STORE	t1, UNIT(-7)(dst),	s_exc_p7u)
-EXC(	STORE	t2, UNIT(-6)(dst),	s_exc_p6u)
-EXC(	STORE	t3, UNIT(-5)(dst),	s_exc_p5u)
-EXC(	LOAD	t0, UNIT(-4)(src),	l_exc_copy)
-EXC(	LOAD	t1, UNIT(-3)(src),	l_exc_copy)
-EXC(	LOAD	t2, UNIT(-2)(src),	l_exc_copy)
-EXC(	LOAD	t3, UNIT(-1)(src),	l_exc_copy)
 EXC(	STORE	t0, UNIT(-4)(dst),	s_exc_p4u)
+	ADD	src, src, 16*NBYTES
 EXC(	STORE	t1, UNIT(-3)(dst),	s_exc_p3u)
 EXC(	STORE	t2, UNIT(-2)(dst),	s_exc_p2u)
 EXC(	STORE	t3, UNIT(-1)(dst),	s_exc_p1u)
-- 
2.7.4