[PATCH] MIPS: BCM47XX: Add Luxul XAP1500/XWR1750 WiFi LEDs

[Dan Haab <riproute@gmail.com>]

From: Dan Haab <dan.haab@luxul.com>

Some Luxul devices use PCIe connected GPIO LEDs that are not available
until the PCI subsytem and its drivers load. Using the same array for 
these LEDs would block registering any LEDs until all GPIOs become 
available. This may be undesired behavior as some LEDs should be 
available as early as possible (e.g. system status LED). This patch
will allow registering available LEDs while deffering these PCIe GPIO
connected 'extra' LEDs until they become available. 

Signed-off-by: Dan Haab <dan.haab@luxul.com>
---

diff --git a/arch/mips/bcm47xx/leds.c b/arch/mips/bcm47xx/leds.c
index 8307a8a..643a2bb 100644
--- a/arch/mips/bcm47xx/leds.c
+++ b/arch/mips/bcm47xx/leds.c
@@ -409,6 +409,12 @@
 };
 
 static const struct gpio_led
+bcm47xx_leds_luxul_xap1500_v1_extra[] __initconst = {
+	BCM47XX_GPIO_LED(44, "green", "5ghz", 0, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(76, "green", "2ghz", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
 bcm47xx_leds_luxul_xbr_4400_v1[] __initconst = {
 	BCM47XX_GPIO_LED(12, "green", "usb", 0, LEDS_GPIO_DEFSTATE_OFF),
 	BCM47XX_GPIO_LED_TRIGGER(15, "green", "status", 0, "timer"),
@@ -435,6 +441,11 @@
 	BCM47XX_GPIO_LED(15, "green", "wps", 0, LEDS_GPIO_DEFSTATE_OFF),
 };
 
+static const struct gpio_led
+bcm47xx_leds_luxul_xwr1750_v1_extra[] __initconst = {
+	BCM47XX_GPIO_LED(76, "green", "2ghz", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
 /* Microsoft */
 
 static const struct gpio_led
@@ -528,6 +539,12 @@
 	bcm47xx_leds_pdata.num_leds = ARRAY_SIZE(dev_leds);		\
 } while (0)
 
+static struct gpio_led_platform_data bcm47xx_leds_pdata_extra = {};
+#define bcm47xx_set_pdata_extra(dev_leds) do {				\
+	bcm47xx_leds_pdata_extra.leds = dev_leds;			\
+	bcm47xx_leds_pdata_extra.num_leds = ARRAY_SIZE(dev_leds);	\
+} while (0)
+
 void __init bcm47xx_leds_register(void)
 {
 	enum bcm47xx_board board = bcm47xx_board_get();
@@ -705,6 +722,7 @@ void __init bcm47xx_leds_register(void)
 		break;
 	case BCM47XX_BOARD_LUXUL_XAP_1500_V1:
 		bcm47xx_set_pdata(bcm47xx_leds_luxul_xap_1500_v1);
+		bcm47xx_set_pdata_extra(bcm47xx_leds_luxul_xap1500_v1_extra);
 		break;
 	case BCM47XX_BOARD_LUXUL_XBR_4400_V1:
 		bcm47xx_set_pdata(bcm47xx_leds_luxul_xbr_4400_v1);
@@ -717,6 +735,7 @@ void __init bcm47xx_leds_register(void)
 		break;
 	case BCM47XX_BOARD_LUXUL_XWR_1750_V1:
 		bcm47xx_set_pdata(bcm47xx_leds_luxul_xwr_1750_v1);
+		bcm47xx_set_pdata_extra(bcm47xx_leds_luxul_xwr1750_v1_extra);
 		break;
 
 	case BCM47XX_BOARD_MICROSOFT_MN700:
@@ -760,4 +779,6 @@ void __init bcm47xx_leds_register(void)
 	}
 
 	gpio_led_register_device(-1, &bcm47xx_leds_pdata);
+	if (bcm47xx_leds_pdata_extra.num_leds)
+		gpio_led_register_device(0, &bcm47xx_leds_pdata_extra);
 }