Linux MIPS Architecture development
 help / color / mirror / Atom feed
From: "Svetoslav Slavtchev" <svetljo@gmx.de>
To: Ralf Ackermann <rac@KOM.tu-darmstadt.de>
Cc: linuxconsole-dev@lists.sourceforge.net,
	linux-mips@linux-mips.org, rac@KOM.tu-darmstadt.de
Subject: Re: Q: problems with missing /dev/tty0 on X startup in MIPS system
Date: Thu, 12 Aug 2004 21:11:33 +0200 (MEST)	[thread overview]
Message-ID: <15387.1092337893@www3.gmx.net> (raw)
In-Reply-To: Pine.LNX.4.58.0408121954270.14123@shofar.kom.e-technik.tu-darmstadt.de

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="us-ascii", Size: 1475 bytes --]

> Hello,
> 
> I'm trying to get VGA output on a MIPSel system (MeshCube 
> http://www.meshcube.org) to work. 
> The system uses a miniPCI ATI Rage VGA card (=> problem does not get 
> initialized due to lack of system BIOS => hopefully initialized by int10 
> XFree86 x86 emulator code).
> 
> I've attached an USB mouse and keyboard but fail to start X due to
> 
> Fatal server error:
> xf86OpenConsole: Cannot open /dev/tty0 (No such file or directory)
> 
> My questions to those working with MIPS boards / on the Ruby/Linux console
> project are:
>  - 1. How to test the USB input functionality?
> 	(I could test the mouse by doing: cat < /dev/input/mice
> 	=> any hints on doing something similar for the keyboard?)

not a guru here, but i hope this will help you
-----------------------
modprobe evdev
cat /proc/bus/input/devices
: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
H: Handlers=kbd event0
B: EV=120003
B: KEY=4 2000000 2b803878 f840d001 f2ffffdf ffefffff ffffffff fffffffe
B: LED=7
<snip>
cat /dev/input/event0
------
should give you some characters on typing to
the corresponding keyboard

>  - 2. Any hints on the missing /dev/tty0 stuff? (this is maybe
> 	related to the console / keyboard stuff?)
> 
> Any hints are welcome, best regards
>  Ralf

best,

svetljo

-- 
NEU: WLAN-Router für 0,- EUR* - auch für DSL-Wechsler!
GMX DSL = supergünstig & kabellos http://www.gmx.net/de/go/dsl

WARNING: multiple messages have this Message-ID (diff)
From: "Svetoslav Slavtchev" <svetljo@gmx.de>
To: Ralf Ackermann <rac@KOM.tu-darmstadt.de>
Cc: linuxconsole-dev@lists.sourceforge.net, linux-mips@linux-mips.org
Subject: Re: Q: problems with missing /dev/tty0 on X startup in MIPS system
Date: Thu, 12 Aug 2004 21:11:33 +0200 (MEST)	[thread overview]
Message-ID: <15387.1092337893@www3.gmx.net> (raw)
Message-ID: <20040812191133.DphBnHPtCTBn9XvK-buHJw1IY7hSw3OWZ_G05_NLAIo@z> (raw)
In-Reply-To: Pine.LNX.4.58.0408121954270.14123@shofar.kom.e-technik.tu-darmstadt.de

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="us-ascii", Size: 1475 bytes --]

> Hello,
> 
> I'm trying to get VGA output on a MIPSel system (MeshCube 
> http://www.meshcube.org) to work. 
> The system uses a miniPCI ATI Rage VGA card (=> problem does not get 
> initialized due to lack of system BIOS => hopefully initialized by int10 
> XFree86 x86 emulator code).
> 
> I've attached an USB mouse and keyboard but fail to start X due to
> 
> Fatal server error:
> xf86OpenConsole: Cannot open /dev/tty0 (No such file or directory)
> 
> My questions to those working with MIPS boards / on the Ruby/Linux console
> project are:
>  - 1. How to test the USB input functionality?
> 	(I could test the mouse by doing: cat < /dev/input/mice
> 	=> any hints on doing something similar for the keyboard?)

not a guru here, but i hope this will help you
-----------------------
modprobe evdev
cat /proc/bus/input/devices
: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
H: Handlers=kbd event0
B: EV=120003
B: KEY=4 2000000 2b803878 f840d001 f2ffffdf ffefffff ffffffff fffffffe
B: LED=7
<snip>
cat /dev/input/event0
------
should give you some characters on typing to
the corresponding keyboard

>  - 2. Any hints on the missing /dev/tty0 stuff? (this is maybe
> 	related to the console / keyboard stuff?)
> 
> Any hints are welcome, best regards
>  Ralf

best,

svetljo

-- 
NEU: WLAN-Router für 0,- EUR* - auch für DSL-Wechsler!
GMX DSL = supergünstig & kabellos http://www.gmx.net/de/go/dsl

  parent reply	other threads:[~2004-08-12 19:11 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-08-12 18:02 Q: problems with missing /dev/tty0 on X startup in MIPS system Ralf Ackermann
2004-08-12 19:04 ` Geert Uytterhoeven
2004-08-12 22:15   ` Ralf Ackermann
2004-08-12 22:28     ` Pete Popov
2004-08-12 19:11 ` Svetoslav Slavtchev [this message]
2004-08-12 19:11   ` Svetoslav Slavtchev
2004-08-12 20:06 ` Goswin von Brederlow

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=15387.1092337893@www3.gmx.net \
    --to=svetljo@gmx.de \
    --cc=linux-mips@linux-mips.org \
    --cc=linuxconsole-dev@lists.sourceforge.net \
    --cc=rac@KOM.tu-darmstadt.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox