Linux MIPS Architecture development
 help / color / mirror / Atom feed
* Re: Alchemy DB1200
@ 2008-07-16  4:08 saran1484
  0 siblings, 0 replies; 4+ messages in thread
From: saran1484 @ 2008-07-16  4:08 UTC (permalink / raw)
  To: linux-mips



abhiruchi.g wrote:
> 
> I am trying to build kernel for DB1200 board.
> but kernel hangs after the following output:
> 
> Image Loaded Successfully.
> ---------------------------------------------
> Program Entry Point: 80536000
> Executing Application
> Linux version 2.6.22 (abhi@linux-3s9p) (gcc version 4.2.1) #75 PREEMPT Mon
> Apr 8
> CPU revision is: 04030201
> AMD Alchemy Db1200 Board
> (PRId 04030201) @ 396MHZ
> Determined physical RAM map:
> memory: 08000000 @ 00000000 (usable)
> User-defined physical RAM map:
> memory: 08000000 @ 00000000 (usable)
> Initrd not found or empty - disabling initrd
> Built 1 zonelists.  Total pages: 32512
> Kernel command line: rootdelay=10 rootfstype=ext2 mem=128M root=/dev/sda1  
> vid0
> Primary instruction cache 16kB, physically tagged, 4-way, linesize 32
> bytes.
> Primary data cache 16kB, 4-way, linesize 32 bytes.
> Synthesized TLB refill handler (17 instructions).
> Synthesized TLB load handler fastpath (34 instructions).
> Synthesized TLB store handler fastpath (34 instructions).
> Synthesized TLB modify handler fastpath (33 instructions).
> PID hash table entries: 512 (order: 9, 2048 bytes)
> calculating r4koff... 00060ae0(396000)
> CPU frequency 396.00 MHz
> Console: colour dummy device 80x25
> Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
> Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
> Memory: 124032k/131072k available (3069k kernel code, 6904k reserved,
> 1238k dat)
> Mount-cache hash table entries: 512
> NET: Registered protocol family 16
> SCSI subsystem initialized
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> Bluetooth: Core ver 2.11
> NET: Registered protocol family 31
> Bluetooth: HCI device and connection manager initialized
> Bluetooth: HCI socket layer initialized
> Time: MIPS clocksource has been installed.
> NET: Registered protocol family 2
> IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
> TCP established hash table entries: 4096 (order: 3, 32768 bytes)
> TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
> TCP: Hash tables configured (established 4096 bind 4096)
> TCP reno registered
> JFS: nTxBlock = 970, nTxLock = 7760
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> au1200fb: LCD controller driver for AU1200 processors
> au1200fb: Panel 0 QVGA_320x240
> au1200fb: Win 2 0-FS gfx, 1-video, 2-ovly gfx, 3-ovly gfx
> Panel(QVGA_320x240), 320x240
> 
> 
> 
> 
> Console: switching to colour frame buffer device 40x30
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
> serial8250.9: ttyS0 at MMIO 0x11100000 (irq = 0) is a 16550A
> serial8250.9: ttyS1 at MMIO 0x11200000 (irq = 8) is a 16550A
> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
> loop: module loaded
> nbd: registered device at major 43
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 50MHz system bus speed for PIO modes; override with
> idebus=xx
> Au1xxx IDE(builtin) configured for PIO+DDMA(offload)
> au1xxx-ehci au1xxx-ehci.0: Au1xxx EHCI
> au1xxx-ehci au1xxx-ehci.0: new USB bus registered, assigned bus number 1
> au1xxx-ehci au1xxx-ehci.0: irq 29, io mem 0x14020200
> au1xxx-ehci au1xxx-ehci.0: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
> usb usb1: configuration #1 chosen from 1 choice
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 2 ports detected
> au1xxx-ohci au1xxx-ohci.0: Au1xxx OHCI
> au1xxx-ohci au1xxx-ohci.0: new USB bus registered, assigned bus number 2
> au1xxx-ohci au1xxx-ohci.0: irq 29, io mem 0x14020100
> usb usb2: configuration #1 chosen from 1 choice
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 2 ports detected
> usb 1-1: new high speed USB device using au1xxx-ehci and address 2
> Initializing USB Mass Storage driver...
> usb 1-1: configuration #1 chosen from 1 choice
> hub 1-1:1.0: USB hub found
> hub 1-1:1.0: 4 ports detected
> usb 1-1.2: new high speed USB device using au1xxx-ehci and address 3
> usb 1-1.2: configuration #1 chosen from 1 choice
> scsi0 : SCSI emulation for USB Mass Storage devices
> usbcore: registered new interface driver usb-storage
> USB Mass Storage support registered.
> mice: PS/2 mouse device common for all mice
> 
> After this i cant get the following message i want to know whether i need
> to change the kernel configuration
> Bluetooth: HCI USB driver ver 2.9
> usbcore: registered new interface driver hci_usb
> usbcore: registered new interface driver hiddev
> usbcore: registered new interface driver usbhid
> drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
> TCP cubic registered
> NET: Registered protocol family 17
> Bluetooth: L2CAP ver 2.8
> Bluetooth: L2CAP socket layer initialized
> Bluetooth: SCO (Voice Link) ver 0.5
> Bluetooth: SCO socket layer initialized
> Bluetooth: HIDP (Human Interface Emulation) ver 1.2
> ieee80211: 802.11 data/management/control stack, git-1.1.13
> ieee80211: Copyright (C) 2004-2005 Intel Corporation
> <jketreno@linux.intel.com>
> drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
> Waiting 10sec before mounting root device...
> 
>  i want my kernle to wait 
> 
> scsi 0:0:0:0: Direct-Access     Ut163    USB2FlashStorage 0.00 PQ: 0 ANSI:
> 2
> sd 0:0:0:0: [sda] 983808 512-byte hardware sectors (504 MB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Assuming drive cache: write through
> sd 0:0:0:0: [sda] 983808 512-byte hardware sectors (504 MB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Assuming drive cache: write through
> sda:<7>usb-storage: queuecommand called
> sda1
> sd 0:0:0:0: [sda] Attached SCSI removable disk
> sd 0:0:0:0: Attached scsi generic sg0 type 0
> VFS: Mounted root (ext2 filesystem) readonly.
> mount_block_root: name=/dev/root fs=ext2 flags=32769
> Freeing unused kernel memory: 164k freed
> Warning: unable to open an initial console.
> Algorithmics/MIPS FPU Emulator v1.5
> 
> 
> 
> 
> what could be the problem?
> Is this creating any problem?
> sda:<7>usb-storage: queuecommand called
> 
> 
> 
> 
> 
> 

-- 
View this message in context: http://www.nabble.com/Alchemy-DB1200-tp17121656p18470529.html
Sent from the linux-mips main mailing list archive at Nabble.com.

^ permalink raw reply	[flat|nested] 4+ messages in thread
* Alchemy DB1200
@ 2008-05-08  8:38 abhiruchi.g
  0 siblings, 0 replies; 4+ messages in thread
From: abhiruchi.g @ 2008-05-08  8:38 UTC (permalink / raw)
  To: linux-mips, linux-kernel


what this meant:

sda:<7>usb-storage: queuecommand called

^ permalink raw reply	[flat|nested] 4+ messages in thread
* Alchemy DB1200
@ 2008-05-08  7:11 abhiruchi.g
  2008-05-08  7:38 ` Thorsten Schulz
  0 siblings, 1 reply; 4+ messages in thread
From: abhiruchi.g @ 2008-05-08  7:11 UTC (permalink / raw)
  To: linux-mips, linux-kernel

I am trying to build kernel for DB1200 board.
but kernel hangs after the following output:

Image Loaded Successfully.
---------------------------------------------
Program Entry Point: 80536000
Executing Application
Linux version 2.6.22 (abhi@linux-3s9p) (gcc version 4.2.1) #75 PREEMPT Mon Apr 8
CPU revision is: 04030201
AMD Alchemy Db1200 Board
(PRId 04030201) @ 396MHZ
Determined physical RAM map:
memory: 08000000 @ 00000000 (usable)
User-defined physical RAM map:
memory: 08000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Built 1 zonelists.  Total pages: 32512
Kernel command line: rootdelay=10 rootfstype=ext2 mem=128M root=/dev/sda1   vid0
Primary instruction cache 16kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 16kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (17 instructions).
Synthesized TLB load handler fastpath (34 instructions).
Synthesized TLB store handler fastpath (34 instructions).
Synthesized TLB modify handler fastpath (33 instructions).
PID hash table entries: 512 (order: 9, 2048 bytes)
calculating r4koff... 00060ae0(396000)
CPU frequency 396.00 MHz
Console: colour dummy device 80x25
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 124032k/131072k available (3069k kernel code, 6904k reserved, 1238k dat)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Time: MIPS clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
JFS: nTxBlock = 970, nTxLock = 7760
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
au1200fb: LCD controller driver for AU1200 processors
au1200fb: Panel 0 QVGA_320x240
au1200fb: Win 2 0-FS gfx, 1-video, 2-ovly gfx, 3-ovly gfx
Panel(QVGA_320x240), 320x240




Console: switching to colour frame buffer device 40x30














Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250.9: ttyS0 at MMIO 0x11100000 (irq = 0) is a 16550A
serial8250.9: ttyS1 at MMIO 0x11200000 (irq = 8) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: module loaded
nbd: registered device at major 43
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Au1xxx IDE(builtin) configured for PIO+DDMA(offload)
au1xxx-ehci au1xxx-ehci.0: Au1xxx EHCI
au1xxx-ehci au1xxx-ehci.0: new USB bus registered, assigned bus number 1
au1xxx-ehci au1xxx-ehci.0: irq 29, io mem 0x14020200
au1xxx-ehci au1xxx-ehci.0: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
au1xxx-ohci au1xxx-ohci.0: Au1xxx OHCI
au1xxx-ohci au1xxx-ohci.0: new USB bus registered, assigned bus number 2
au1xxx-ohci au1xxx-ohci.0: irq 29, io mem 0x14020100
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-1: new high speed USB device using au1xxx-ehci and address 2
Initializing USB Mass Storage driver...
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 1-1.2: new high speed USB device using au1xxx-ehci and address 3
usb 1-1.2: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mice: PS/2 mouse device common for all mice
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new interface driver hci_usb
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.5
Bluetooth: SCO socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Waiting 10sec before mounting root device...
scsi 0:0:0:0: Direct-Access     Ut163    USB2FlashStorage 0.00 PQ: 0 ANSI: 2
sd 0:0:0:0: [sda] 983808 512-byte hardware sectors (504 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] 983808 512-byte hardware sectors (504 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda:<7>usb-storage: queuecommand called
sda1
sd 0:0:0:0: [sda] Attached SCSI removable disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
VFS: Mounted root (ext2 filesystem) readonly.
mount_block_root: name=/dev/root fs=ext2 flags=32769
Freeing unused kernel memory: 164k freed
Warning: unable to open an initial console.
Algorithmics/MIPS FPU Emulator v1.5




what could be the problem?
Is this creating any problem?
sda:<7>usb-storage: queuecommand called

^ permalink raw reply	[flat|nested] 4+ messages in thread
end of thread, other threads:[~2008-07-16  4:08 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-07-16  4:08 Alchemy DB1200 saran1484
  -- strict thread matches above, loose matches on Subject: below --
2008-05-08  8:38 abhiruchi.g
2008-05-08  7:11 abhiruchi.g
2008-05-08  7:38 ` Thorsten Schulz

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox