Linux MIPS Architecture development
 help / color / mirror / Atom feed
* Are you satisfied now Mr. McVoy? ;-)
@ 1996-06-08 11:23 David S. Miller
  1996-06-08 18:22 ` Ariel Faigon
  1996-06-10 16:56 ` William J. Earl
  0 siblings, 2 replies; 7+ messages in thread
From: David S. Miller @ 1996-06-08 11:23 UTC (permalink / raw)
  To: linux


Calibrating delay loop.. ok - 91.96 BogoMIPS

Later,
David S. Miller
dm@sgi.com

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: Are you satisfied now Mr. McVoy? ;-)
  1996-06-08 11:23 Are you satisfied now Mr. McVoy? ;-) David S. Miller
@ 1996-06-08 18:22 ` Ariel Faigon
  1996-06-08 18:22   ` Ariel Faigon
  1996-06-10 17:02   ` William J. Earl
  1996-06-10 16:56 ` William J. Earl
  1 sibling, 2 replies; 7+ messages in thread
From: Ariel Faigon @ 1996-06-08 18:22 UTC (permalink / raw)
  To: David S. Miller; +Cc: linux

>
>
>Calibrating delay loop.. ok - 91.96 BogoMIPS
>
Will a Triton CPU (R5000) make this better ? :-)

For those who are not familiar with bogomips, my Pentium-100
at home does 39.94 bogomips. And the best number I've seen
for a desktop is almost 300 bogomips for an  Alpha 21064
overclocked to 300MHz. The 91.96 number for a 150MHz Indy
sounds pretty good. 

Still, I would like to know, David:
What clock factor are you using? The DEC Alphas do one
clock pre instruction, so their factor is 1, why is
the Indy at less than two-thirds of its clock rate?


Fr more details:
	http://sunsite.unc.edu/linux/HOWTO/mini/BogoMips

It would be nice to send them the new data...

-- 
Peace, Ariel

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: Are you satisfied now Mr. McVoy? ;-)
  1996-06-08 18:22 ` Ariel Faigon
@ 1996-06-08 18:22   ` Ariel Faigon
  1996-06-10 17:02   ` William J. Earl
  1 sibling, 0 replies; 7+ messages in thread
From: Ariel Faigon @ 1996-06-08 18:22 UTC (permalink / raw)
  To: David S. Miller; +Cc: linux

>
>
>Calibrating delay loop.. ok - 91.96 BogoMIPS
>
Will a Triton CPU (R5000) make this better ? :-)

For those who are not familiar with bogomips, my Pentium-100
at home does 39.94 bogomips. And the best number I've seen
for a desktop is almost 300 bogomips for an  Alpha 21064
overclocked to 300MHz. The 91.96 number for a 150MHz Indy
sounds pretty good. 

Still, I would like to know, David:
What clock factor are you using? The DEC Alphas do one
clock pre instruction, so their factor is 1, why is
the Indy at less than two-thirds of its clock rate?


Fr more details:
	http://sunsite.unc.edu/linux/HOWTO/mini/BogoMips

It would be nice to send them the new data...

-- 
Peace, Ariel

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: Are you satisfied now Mr. McVoy? ;-)
  1996-06-08 11:23 Are you satisfied now Mr. McVoy? ;-) David S. Miller
  1996-06-08 18:22 ` Ariel Faigon
@ 1996-06-10 16:56 ` William J. Earl
  1996-06-10 16:59   ` David S. Miller
  1 sibling, 1 reply; 7+ messages in thread
From: William J. Earl @ 1996-06-10 16:56 UTC (permalink / raw)
  To: David S. Miller; +Cc: linux

David S. Miller writes:
 > 
 > Calibrating delay loop.. ok - 91.96 BogoMIPS

      I assume this is on the target system, which should be a 133 MHZ R4600SC.

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: Are you satisfied now Mr. McVoy? ;-)
  1996-06-10 16:56 ` William J. Earl
@ 1996-06-10 16:59   ` David S. Miller
  0 siblings, 0 replies; 7+ messages in thread
From: David S. Miller @ 1996-06-10 16:59 UTC (permalink / raw)
  To: wje; +Cc: linux

   Date: Mon, 10 Jun 1996 09:56:22 -0700
   From: wje@fir.esd.sgi.com (William J. Earl)

   David S. Miller writes:
    >  Calibrating delay loop.. ok - 91.96 BogoMIPS

	 I assume this is on the target system, which should be a 133
	 MHZ R4600SC.

Yes, but beware my r4k compare register calibration still needs some
work, this value could be off a bit...

Later,
David S. Miller
dm@sgi.com

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: Are you satisfied now Mr. McVoy? ;-)
  1996-06-08 18:22 ` Ariel Faigon
  1996-06-08 18:22   ` Ariel Faigon
@ 1996-06-10 17:02   ` William J. Earl
  1996-06-10 17:02     ` William J. Earl
  1 sibling, 1 reply; 7+ messages in thread
From: William J. Earl @ 1996-06-10 17:02 UTC (permalink / raw)
  To: ariel; +Cc: David S. Miller, linux

Ariel Faigon writes:
 > >
 > >
 > >Calibrating delay loop.. ok - 91.96 BogoMIPS
 > >
 > Will a Triton CPU (R5000) make this better ? :-)

     An R5000 should scale with clock rate, relative to the 133 MHZ R4600
David is using.  The 180 MHZ R5000 would then be 124.46.

 > For those who are not familiar with bogomips, my Pentium-100
 > at home does 39.94 bogomips. And the best number I've seen
 > for a desktop is almost 300 bogomips for an  Alpha 21064
 > overclocked to 300MHz. The 91.96 number for a 150MHz Indy
 > sounds pretty good. 

     I think the 150 MHZ R4400 is in David's host machine, with the
133 MHZ R4600 in his target machine, so the 91.96 should be for the latter.

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: Are you satisfied now Mr. McVoy? ;-)
  1996-06-10 17:02   ` William J. Earl
@ 1996-06-10 17:02     ` William J. Earl
  0 siblings, 0 replies; 7+ messages in thread
From: William J. Earl @ 1996-06-10 17:02 UTC (permalink / raw)
  To: ariel; +Cc: David S. Miller, linux

Ariel Faigon writes:
 > >
 > >
 > >Calibrating delay loop.. ok - 91.96 BogoMIPS
 > >
 > Will a Triton CPU (R5000) make this better ? :-)

     An R5000 should scale with clock rate, relative to the 133 MHZ R4600
David is using.  The 180 MHZ R5000 would then be 124.46.

 > For those who are not familiar with bogomips, my Pentium-100
 > at home does 39.94 bogomips. And the best number I've seen
 > for a desktop is almost 300 bogomips for an  Alpha 21064
 > overclocked to 300MHz. The 91.96 number for a 150MHz Indy
 > sounds pretty good. 

     I think the 150 MHZ R4400 is in David's host machine, with the
133 MHZ R4600 in his target machine, so the 91.96 should be for the latter.

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~1996-06-10 17:03 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
1996-06-08 11:23 Are you satisfied now Mr. McVoy? ;-) David S. Miller
1996-06-08 18:22 ` Ariel Faigon
1996-06-08 18:22   ` Ariel Faigon
1996-06-10 17:02   ` William J. Earl
1996-06-10 17:02     ` William J. Earl
1996-06-10 16:56 ` William J. Earl
1996-06-10 16:59   ` David S. Miller

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox