* RedHat 5.0 RPMs for SGI...
@ 1998-01-09 19:54 Alex deVries
1998-01-09 20:07 ` Eric Kimminau
1998-01-10 18:17 ` Alan Cox
0 siblings, 2 replies; 10+ messages in thread
From: Alex deVries @ 1998-01-09 19:54 UTC (permalink / raw)
To: SGI Linux
Now that I'm nicely settled back at work with my Indy, I've had a chance
to get my system up to scratch with Ralf's latest glibc. Much better!
gethostbbynam and such now work properly, so I can now build RPMs.
I'm in the middle of churning out the RH 5.0 RPMs, and I'll upload them
into a seperate directory on linus than the others. The only difference
with these and many of the RPM's already on linus is that they're built
against the latest glibc, and they're from the RH 5.0 install, not 4.9.1.
Most of the work is getting a build environment going; the rpm of rpm
itself on linus won't build because it's compiled against an older libc;
then there's all the other broken libraries to create or fix...
Could someone in Europe kindly create a PGP RPM? I have one here, but I
cannot distribute it because of ridiculous laws.
Some odd problems I'm encountering:
- the bare system which runs nothing consumes 20MB of RAM. I'm using
Ralf's 2.1.67 kernel. Perhaps I'm reading it wrong, but 'free' gives me
20MB used, 16MB which is unaccounted for. Does this mean the kernel is
using 16MB? Wow. It explains the 'memory exhausted' problems I get.
- gcc occasionally segfaults.
But, I have a functional system I can telnet into with virtual consoles
and most things II need to get boot strapped. It looks good.
- A
--
Alex deVries Run Linux on everything,
System Administrator run everything on Linux.
The EngSoc Project Send spam to spam@engsoc.carleton.ca.
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: RedHat 5.0 RPMs for SGI...
1998-01-09 19:54 RedHat 5.0 RPMs for SGI Alex deVries
@ 1998-01-09 20:07 ` Eric Kimminau
1998-01-10 0:25 ` Alex deVries
1998-01-10 18:17 ` Alan Cox
1 sibling, 1 reply; 10+ messages in thread
From: Eric Kimminau @ 1998-01-09 20:07 UTC (permalink / raw)
To: Alex deVries; +Cc: SGI Linux
Alex deVries wrote:
> Some odd problems I'm encountering:
> - the bare system which runs nothing consumes 20MB of RAM. I'm using
> Ralf's 2.1.67 kernel. Perhaps I'm reading it wrong, but 'free' gives me
> 20MB used, 16MB which is unaccounted for. Does this mean the kernel is
> using 16MB? Wow. It explains the 'memory exhausted' problems I get.
> - gcc occasionally segfaults.
>
> But, I have a functional system I can telnet into with virtual consoles
> and most things II need to get boot strapped. It looks good.
>
> - A
Linux always reports all of your memory used. At least it always has on
my PC at home.
--
---------1---------2---------3---------4---------5---------6---------7---------8
Eric Kimminau RTA/RSA
eak@detroit.sgi.com Silicon Graphics, Inc
Voice: (248) 848-4455 39001 West 12 Mile Rd.
Fax: (248) 848-5600 Farmington, MI 48331-2903
VNet Extension - 6-327-4455
"I speak my mind and no one else's."
http://www.dcs.ex.ac.uk/~aba/rsa/perl-rsa-sig.html
When confronted by a difficult problem, solve it by reducing
it to the question, "How would the Lone Ranger handle this?"
"I am the great supportfolio, do you have http?"
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: RedHat 5.0 RPMs for SGI...
1998-01-09 20:07 ` Eric Kimminau
@ 1998-01-10 0:25 ` Alex deVries
1998-01-10 10:54 ` Ralf Baechle
0 siblings, 1 reply; 10+ messages in thread
From: Alex deVries @ 1998-01-10 0:25 UTC (permalink / raw)
To: SGI Linux
On Fri, 9 Jan 1998, Eric Kimminau wrote:
> Alex deVries wrote:
> > Some odd problems I'm encountering:
> > - the bare system which runs nothing consumes 20MB of RAM. I'm using
> > Ralf's 2.1.67 kernel. Perhaps I'm reading it wrong, but 'free' gives me
> > 20MB used, 16MB which is unaccounted for. Does this mean the kernel is
> > using 16MB? Wow. It explains the 'memory exhausted' problems I get.
>
> Linux always reports all of your memory used. At least it always has on
> my PC at home.
I had a closer look at it, and indeed, all the memory is accounted for.
But, what I'm totally unused to is things taking up so much. I've got
64MB in there now (although it's detected as 60248kB, it's missing 4MB).
Now I've got just the bare bones required to do anything productive:
bdflush, inetd and a couple of shells. There goes half my memory.
For example, 'su' takes up 4.5MB. This seems like an awful lot to me,
compared to the Intel equivalent of 1MB. I know the binaries are going to
be larger because of the RISC thing, but really that large?
Is this normal?
- Alex
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: RedHat 5.0 RPMs for SGI...
1998-01-10 0:25 ` Alex deVries
@ 1998-01-10 10:54 ` Ralf Baechle
0 siblings, 0 replies; 10+ messages in thread
From: Ralf Baechle @ 1998-01-10 10:54 UTC (permalink / raw)
To: Alex deVries; +Cc: SGI Linux
On Fri, Jan 09, 1998 at 07:25:50PM -0500, Alex deVries wrote:
> I had a closer look at it, and indeed, all the memory is accounted for.
> But, what I'm totally unused to is things taking up so much. I've got
> 64MB in there now (although it's detected as 60248kB, it's missing 4MB).
The 60248kb is what the ARC firmware returns as free memory.
> Now I've got just the bare bones required to do anything productive:
> bdflush, inetd and a couple of shells. There goes half my memory.
>
> For example, 'su' takes up 4.5MB. This seems like an awful lot to me,
> compared to the Intel equivalent of 1MB. I know the binaries are going to
> be larger because of the RISC thing, but really that large?
>
> Is this normal?
It think the way these numbers are being computed is broken for MIPS.
MIPS executables are rougly 50-70% bigger than i386 ones; the size of the
data in executables and memory should be comparable.
Ralf
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: RedHat 5.0 RPMs for SGI...
1998-01-09 19:54 RedHat 5.0 RPMs for SGI Alex deVries
1998-01-09 20:07 ` Eric Kimminau
@ 1998-01-10 18:17 ` Alan Cox
1998-01-10 18:17 ` Alan Cox
` (2 more replies)
1 sibling, 3 replies; 10+ messages in thread
From: Alan Cox @ 1998-01-10 18:17 UTC (permalink / raw)
To: Alex deVries; +Cc: linux
> I'm in the middle of churning out the RH 5.0 RPMs, and I'll upload them
> into a seperate directory on linus than the others. The only difference
> with these and many of the RPM's already on linus is that they're built
> against the latest glibc, and they're from the RH 5.0 install, not 4.9.1.
Ok. I'll work with you on that from Monday. Ive got the fixes for several
RH5 SRPMS to build with mips. Glibc 2.0.6 should fix the argv[0] bug
and the -lbsd problems too so much more should build
> Could someone in Europe kindly create a PGP RPM? I have one here, but I
> cannot distribute it because of ridiculous laws.
No problem. I can build pgp etc again. I'll build ssh and anything else
looking fun off replay and upload the stuff back
Alan
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: RedHat 5.0 RPMs for SGI...
1998-01-10 18:17 ` Alan Cox
@ 1998-01-10 18:17 ` Alan Cox
1998-01-10 18:39 ` ralf
1998-01-10 19:13 ` Alex deVries
2 siblings, 0 replies; 10+ messages in thread
From: Alan Cox @ 1998-01-10 18:17 UTC (permalink / raw)
To: Alex deVries; +Cc: linux
> I'm in the middle of churning out the RH 5.0 RPMs, and I'll upload them
> into a seperate directory on linus than the others. The only difference
> with these and many of the RPM's already on linus is that they're built
> against the latest glibc, and they're from the RH 5.0 install, not 4.9.1.
Ok. I'll work with you on that from Monday. Ive got the fixes for several
RH5 SRPMS to build with mips. Glibc 2.0.6 should fix the argv[0] bug
and the -lbsd problems too so much more should build
> Could someone in Europe kindly create a PGP RPM? I have one here, but I
> cannot distribute it because of ridiculous laws.
No problem. I can build pgp etc again. I'll build ssh and anything else
looking fun off replay and upload the stuff back
Alan
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: RedHat 5.0 RPMs for SGI...
1998-01-10 18:17 ` Alan Cox
1998-01-10 18:17 ` Alan Cox
@ 1998-01-10 18:39 ` ralf
1998-01-10 19:13 ` Alex deVries
2 siblings, 0 replies; 10+ messages in thread
From: ralf @ 1998-01-10 18:39 UTC (permalink / raw)
To: Alan Cox; +Cc: Alex deVries, linux
On Sat, Jan 10, 1998 at 06:17:40PM +0000, Alan Cox wrote:
> > I'm in the middle of churning out the RH 5.0 RPMs, and I'll upload them
> > into a seperate directory on linus than the others. The only difference
> > with these and many of the RPM's already on linus is that they're built
> > against the latest glibc, and they're from the RH 5.0 install, not 4.9.1.
>
> Ok. I'll work with you on that from Monday. Ive got the fixes for several
> RH5 SRPMS to build with mips. Glibc 2.0.6 should fix the argv[0] bug
> and the -lbsd problems too so much more should build
That one actually has been fixed months ago in the CVS ...
Ralf
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: RedHat 5.0 RPMs for SGI...
1998-01-10 18:17 ` Alan Cox
1998-01-10 18:17 ` Alan Cox
1998-01-10 18:39 ` ralf
@ 1998-01-10 19:13 ` Alex deVries
2 siblings, 0 replies; 10+ messages in thread
From: Alex deVries @ 1998-01-10 19:13 UTC (permalink / raw)
To: Alan Cox; +Cc: linux
On Sat, 10 Jan 1998, Alan Cox wrote:
> Ok. I'll work with you on that from Monday. Ive got the fixes for several
> RH5 SRPMS to build with mips. Glibc 2.0.6 should fix the argv[0] bug
> and the -lbsd problems too so much more should build
My build ran until about 2am last night before hanging because of a zombie
process. No big deal. The first pass ended at about 't'. In about an
hour all my work will be in ftp://ftp.linux.sgi.com/pub/RedHat/RPMS-5.0 .
I've moved the existing RPMs to RPMS-4.9.x.
- Alex
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: RedHat 5.0 RPMs for SGI...
@ 1998-01-10 1:21 Emmanuel Mogenet
1998-01-10 10:59 ` Ralf Baechle
0 siblings, 1 reply; 10+ messages in thread
From: Emmanuel Mogenet @ 1998-01-10 1:21 UTC (permalink / raw)
To: Alex deVries, SGI Linux
>For example, 'su' takes up 4.5MB. This seems like an awful lot to me,
>compared to the Intel equivalent of 1MB. I know the binaries are going to
>be larger because of the RISC thing, but really that large?
>
>Is this normal?
Here, on the stuff we're working on, we experience that a DLL compiled
with visual C++ in full optimization mode is on average 2.5 times smaller
than the exact same code compiled into a DSO under IRIX 6.2 with compiler
at -O3 -n32 -mips3.
I don't know about gcc under IRIX, but I've never seen a factor of 4 pop up
before.
That seems like an awful lot.
- Mgix
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: RedHat 5.0 RPMs for SGI...
1998-01-10 1:21 Emmanuel Mogenet
@ 1998-01-10 10:59 ` Ralf Baechle
0 siblings, 0 replies; 10+ messages in thread
From: Ralf Baechle @ 1998-01-10 10:59 UTC (permalink / raw)
To: Emmanuel Mogenet; +Cc: Alex deVries, SGI Linux
On Fri, Jan 09, 1998 at 05:21:31PM -0800, Emmanuel Mogenet wrote:
>
>
> >For example, 'su' takes up 4.5MB. This seems like an awful lot to me,
> >compared to the Intel equivalent of 1MB. I know the binaries are going to
> >be larger because of the RISC thing, but really that large?
> >
> >Is this normal?
>
>
> Here, on the stuff we're working on, we experience that a DLL compiled
> with visual C++ in full optimization mode is on average 2.5 times smaller
> than the exact same code compiled into a DSO under IRIX 6.2 with compiler
> at -O3 -n32 -mips3.
Note that SGI's compiler seems to be more trimmed for speed and may
sometimes do massive loopunrolling etc. while the M$ compilers tend to
produce relativly compact code.
> I don't know about gcc under IRIX, but I've never seen a factor of 4 pop up
> before.
Duh... regarding my last post - though Alex was refering to the in memory
size. If his Linux executables are really that big might be producing
static linked ones or containing debug info.
Ralf
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~1998-01-10 19:15 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
1998-01-09 19:54 RedHat 5.0 RPMs for SGI Alex deVries
1998-01-09 20:07 ` Eric Kimminau
1998-01-10 0:25 ` Alex deVries
1998-01-10 10:54 ` Ralf Baechle
1998-01-10 18:17 ` Alan Cox
1998-01-10 18:17 ` Alan Cox
1998-01-10 18:39 ` ralf
1998-01-10 19:13 ` Alex deVries
-- strict thread matches above, loose matches on Subject: below --
1998-01-10 1:21 Emmanuel Mogenet
1998-01-10 10:59 ` Ralf Baechle
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox