Linux MIPS Architecture development
 help / color / mirror / Atom feed
From: Honza Pazdziora <adelton@informatics.muni.cz>
To: adevries@engsoc.carleton.ca (Alex deVries)
Cc: linux@cthulhu.engr.sgi.com
Subject: Mouse support in 2.1.100-2
Date: Fri, 17 Jul 1998 10:09:43 +0200 (MET DST)	[thread overview]
Message-ID: <199807170809.KAA26176@aisa.fi.muni.cz> (raw)
In-Reply-To: <Pine.LNX.3.95.980717012901.5792D-100000@lager.engsoc.carleton.ca> from Alex deVries at "Jul 17, 98 01:32:29 am"

> > - mouse doesn't work?
> 
> In the HH install, there's a package called 'kernel-2.1.100-2'.  If you
> install this, you'll have something like /boot/vmlinux-2.1.100.  That
> kernel (2.1.100) should have mouse support in it.  you'll have to make a
> symbolic link from /dev/psaux to /dev/mouse.

I'm using the new kernel but am confused about the devices. Should I have

	psaux (10/1) and mouse -> psaux ?

Here gpm fails with

	gpm: /dev/mouse: Operation not supported by device

and the same message I get then I do cat /dev/psaux.

Or
	mouse (4/64) and psaux -> mouse ?

Here gpm starts without a problem but no running cursor on the screen.

Yours,

------------------------------------------------------------------------
 Honza Pazdziora | adelton@fi.muni.cz | http://www.fi.muni.cz/~adelton/
                   I can take or leave it if I please
------------------------------------------------------------------------

WARNING: multiple messages have this Message-ID (diff)
From: Honza Pazdziora <adelton@informatics.muni.cz>
To: Alex deVries <adevries@engsoc.carleton.ca>
Cc: linux@cthulhu.engr.sgi.com
Subject: Mouse support in 2.1.100-2
Date: Fri, 17 Jul 1998 10:09:43 +0200 (MET DST)	[thread overview]
Message-ID: <199807170809.KAA26176@aisa.fi.muni.cz> (raw)
Message-ID: <19980717080943.XgiooTpgcEgmXxBIQNY8nGrxwpUirT7-VBLsFTvZXQo@z> (raw)
In-Reply-To: <Pine.LNX.3.95.980717012901.5792D-100000@lager.engsoc.carleton.ca> from Alex deVries at "Jul 17, 98 01:32:29 am"

> > - mouse doesn't work?
> 
> In the HH install, there's a package called 'kernel-2.1.100-2'.  If you
> install this, you'll have something like /boot/vmlinux-2.1.100.  That
> kernel (2.1.100) should have mouse support in it.  you'll have to make a
> symbolic link from /dev/psaux to /dev/mouse.

I'm using the new kernel but am confused about the devices. Should I have

	psaux (10/1) and mouse -> psaux ?

Here gpm fails with

	gpm: /dev/mouse: Operation not supported by device

and the same message I get then I do cat /dev/psaux.

Or
	mouse (4/64) and psaux -> mouse ?

Here gpm starts without a problem but no running cursor on the screen.

Yours,

------------------------------------------------------------------------
 Honza Pazdziora | adelton@fi.muni.cz | http://www.fi.muni.cz/~adelton/
                   I can take or leave it if I please
------------------------------------------------------------------------

  reply	other threads:[~1998-07-17  8:10 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
1998-07-16 18:53 apache and other problems (fwd) Ariel Faigon
1998-07-16 18:53 ` Ariel Faigon
1998-07-17  5:32 ` Alex deVries
1998-07-17  8:09   ` Honza Pazdziora [this message]
1998-07-17  8:09     ` Mouse support in 2.1.100-2 Honza Pazdziora
1998-07-17  8:23   ` apache and other problems (fwd) Francis M. J. Hsieh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=199807170809.KAA26176@aisa.fi.muni.cz \
    --to=adelton@informatics.muni.cz \
    --cc=adevries@engsoc.carleton.ca \
    --cc=linux@cthulhu.engr.sgi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox