Linux MIPS Architecture development
 help / color / mirror / Atom feed
From: job bogan <job@piquin.uchicago.edu>
To: offer@morgaine.engr.sgi.com (Richard Offer)
Cc: linux@cthulhu.engr.sgi.com, ellidz@eridu.uchicago.edu
Subject: Re: [Fwd: linus.linux.sgi.com]
Date: Tue, 19 Jan 1999 21:01:49 -0600	[thread overview]
Message-ID: <199901200301.VAA14922@piquin.uchicago.edu> (raw)
In-Reply-To: Message from offer@morgaine.engr.sgi.com (Richard Offer)  of "Tue, 19 Jan 1999 18:28:50 PST." <9901191828.ZM20761@morgaine.engr.sgi.com>

Your message dated: Tue, 19 Jan 1999 18:28:50 PST

>Well, I couldn't see anything faster than 60ns on Kingstons store.
>http://www.ec.kingston.com/ecom/kepler/specs.asp

100MHz is the bus speed.  to meet that, you need ~5-6ns access times.
Kingston does list 100MHz memory.

>I'd guess that their 10ns is a misprint as its cheap and listed in the PC-66
>section.

look in the PC100 section.  that's the Lintel world acronym for 100MHz
capable ram.  And, yes, it's cheap.  That's the point. =)  If you are
using ECC, the worst i'll see is a hung machine.  and judging by
previous SGI prices, i can buy twice as much 3rd party ram as SGI ram.  

>Isn't 100Mhz and 50ns a measure of two different things ? This is meant as a
>serious question, as I don't know.  But, I'd guess that one is the refresh and
>one the time to access ?

nope.  see the stuff above.  If you want more info, bug me off the list.

>* I might buy some if they are competitive w/ plain old white Linux boxes.
>
>How do you measure 'competitive' ? For me, they aren't; for my next-cubicle
>neighbour they would be. Luckily we don't live in a one size
>(hardware/software) fits all world.

I know, it's a tough question.

Competative, in my realm, is floating point performance based.
Specificly, Big (100's of MB) matrix manipulations.  Lately, generic PCs
and sun E450's have won our $.  Both well outperform SGIs for the
cost. (both O2000 or O200 based.  we have some of each around...)

NT as the only OS for the SGI 540/320 means they are not competitive.
We cannot dedicate, and waste, that much CPU to one person's desktop.
If NT had a good remote user (ssh, telnet, hell a remote queuing system)
interface, we might look at them.  The lack of true multi-user and
non-console interfaces in NT just takes these SGIs off the chart until
linux runs on them.

And once it's there, i see no reason to buy them unless i can get the
Video Performance out of them.  (unless, perhaps, they clean up on raw
cpu due to a cleaned up system bus.)

i've never been the world's biggest SGI/Irix fan. But - for my env., and
most of the Academic world, i just don't see these as viable machines
until Linux or Irix runs on them.  egh...  you may be able to get the
CAD/CAM market back,  but i don't see us buying more SGIs soon.

Anyhow, this is offtopic now.

job

--
John Bogan
Director of Computing					773-702-2588
James Franck Institute				5640 South Ellis Ave
University of Chicago				   Chicago, Il 60637

WARNING: multiple messages have this Message-ID (diff)
From: job bogan <job@piquin.uchicago.edu>
To: Richard Offer <offer@morgaine.engr.sgi.com>
Cc: linux@cthulhu.engr.sgi.com, ellidz@eridu.uchicago.edu
Subject: Re: [Fwd: linus.linux.sgi.com]
Date: Tue, 19 Jan 1999 21:01:49 -0600	[thread overview]
Message-ID: <199901200301.VAA14922@piquin.uchicago.edu> (raw)
Message-ID: <19990120030149.NdJsxxFPpXShg9lguyfgpyO61lyPOoMxlt5ax0Uu_hU@z> (raw)
In-Reply-To: Message from offer@morgaine.engr.sgi.com (Richard Offer) of "Tue, 19 Jan 1999 18:28:50 PST." <9901191828.ZM20761@morgaine.engr.sgi.com>

Your message dated: Tue, 19 Jan 1999 18:28:50 PST

>Well, I couldn't see anything faster than 60ns on Kingstons store.
>http://www.ec.kingston.com/ecom/kepler/specs.asp

100MHz is the bus speed.  to meet that, you need ~5-6ns access times.
Kingston does list 100MHz memory.

>I'd guess that their 10ns is a misprint as its cheap and listed in the PC-66
>section.

look in the PC100 section.  that's the Lintel world acronym for 100MHz
capable ram.  And, yes, it's cheap.  That's the point. =)  If you are
using ECC, the worst i'll see is a hung machine.  and judging by
previous SGI prices, i can buy twice as much 3rd party ram as SGI ram.  

>Isn't 100Mhz and 50ns a measure of two different things ? This is meant as a
>serious question, as I don't know.  But, I'd guess that one is the refresh and
>one the time to access ?

nope.  see the stuff above.  If you want more info, bug me off the list.

>* I might buy some if they are competitive w/ plain old white Linux boxes.
>
>How do you measure 'competitive' ? For me, they aren't; for my next-cubicle
>neighbour they would be. Luckily we don't live in a one size
>(hardware/software) fits all world.

I know, it's a tough question.

Competative, in my realm, is floating point performance based.
Specificly, Big (100's of MB) matrix manipulations.  Lately, generic PCs
and sun E450's have won our $.  Both well outperform SGIs for the
cost. (both O2000 or O200 based.  we have some of each around...)

NT as the only OS for the SGI 540/320 means they are not competitive.
We cannot dedicate, and waste, that much CPU to one person's desktop.
If NT had a good remote user (ssh, telnet, hell a remote queuing system)
interface, we might look at them.  The lack of true multi-user and
non-console interfaces in NT just takes these SGIs off the chart until
linux runs on them.

And once it's there, i see no reason to buy them unless i can get the
Video Performance out of them.  (unless, perhaps, they clean up on raw
cpu due to a cleaned up system bus.)

i've never been the world's biggest SGI/Irix fan. But - for my env., and
most of the Academic world, i just don't see these as viable machines
until Linux or Irix runs on them.  egh...  you may be able to get the
CAD/CAM market back,  but i don't see us buying more SGIs soon.

Anyhow, this is offtopic now.

job

--
John Bogan
Director of Computing					773-702-2588
James Franck Institute				5640 South Ellis Ave
University of Chicago				   Chicago, Il 60637

  parent reply	other threads:[~1999-01-20  3:03 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
1999-01-19 23:28 [Fwd: linus.linux.sgi.com] dmanddmer
1999-01-19 23:28 ` dmanddmer
1999-01-20  1:29 ` Chad Carlin
1999-01-20  1:29   ` Chad Carlin
1999-01-20  2:04   ` job bogan
     [not found]     ` <job@piquin.uchicago.edu>
1999-01-20  2:28       ` Richard Offer
1999-01-20  2:36         ` Ken Klingman
1999-01-20  2:36           ` Ken Klingman
1999-01-20 21:18           ` David Watters
1999-01-20 21:18             ` David Watters
1999-01-20  3:01         ` job bogan [this message]
1999-01-20  3:01           ` job bogan
1999-01-20 21:29           ` David Watters
1999-01-20 21:29             ` David Watters
1999-01-20  3:08         ` Greg Chesson
1999-01-20  3:08           ` Greg Chesson
1999-01-20  3:32     ` Chad Carlin
1999-01-20 16:02     ` Eric Kimminau
1999-01-20 15:18 ` Eric Kimminau
1999-01-20 21:55   ` David Watters
1999-01-21  7:11   ` David S. Miller
1999-01-22 19:14     ` Jeffrey Watts

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=199901200301.VAA14922@piquin.uchicago.edu \
    --to=job@piquin.uchicago.edu \
    --cc=ellidz@eridu.uchicago.edu \
    --cc=linux@cthulhu.engr.sgi.com \
    --cc=offer@morgaine.engr.sgi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox