From: Florian Lohoff <flo@rfc822.org>
To: linux@cthulhu.engr.sgi.com
Subject: Decstation 5000/150 2.3.21 Boot successs
Date: Wed, 5 Jan 2000 22:18:39 +0100 [thread overview]
Message-ID: <20000105221839.A980@paradigm.rfc822.org> (raw)
Hi,
this is is a short output of the 2.3.21 booting on the Decstation
5000/150 ... This is the current oss.sgi.com CVS.
--------------------------------------------------------------
This DECstation is a DS5000/1xx
Loading R4000 MMU routines.
CPU revision is: 00000430
Primary instruction cache 8kb, linesize 16 bytes)
Primary data cache 8kb, linesize 16 bytes)
Secondary cache sized at 1024K linesize 32
Linux version 2.3.21 (root@repeat) (gcc version egcs-2.90.27 980315 (egcs-1.0.2 release)) #1 Tue Jan 4 18:39:20 GMT 2000
Calibrating delay loop... 49.81 BogoMIPS
Memory: 62652k/65532k available (1068k kernel code, 1524k data)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
Checking for 'wait' instruction... unavailable.
POSIX conformance testing by UNIFIX
TURBOchannel rev. 1 at 12.5 MHz (no parity)
slot 0: DEC PMAZ-AA V5.3d
slot 1: DEC PMAZ-AA V5.3b
slot 2: DEC PMAF-FA V1.1
Linux NET4.0 for Linux 2.3
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (established 4096 bind 8192)
Starting kswapd v1.6
DECstation Z8530 serial driver version 0.03
tty00 at 0xbc100001 (irq = 4) is a Z85C30 SCC
tty01 at 0xbc100009 (irq = 4) is a Z85C30 SCC
tty02 at 0xbc180001 (irq = 4) is a Z85C30 SCC
tty03 at 0xbc180009 (irq = 4) is a Z85C30 SCC
SCSI ID 7 Clk 25MHz CCF=5 TOut 167 NCR53C9x(esp236)
SCSI ID 7 Clk 12MHz CCF=3 TOut 139 NCR53C9x(esp236)
SCSI ID 7 Clk 12MHz CCF=3 TOut 139 NCR53C9x(esp236)
ESP: Total of 3 ESP hosts found, 3 actually in use.
scsi0 : ESP236 (NCR53C9x)
scsi1 : ESP236 (NCR53C9x)
scsi2 : ESP236 (NCR53C9x)
scsi : 3 hosts.
Vendor: Quantum Model: XP34300 Rev: L912
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: SEAGATE Model: ST15150N Rev: 8902
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdb at scsi0, channel 0, id 2, lun 0
scsi : detected 2 SCSI disks total.
esp0: target 0 [period 200ns offset 15 5.00MHz synchronous SCSI]
SCSI device sda: hdwr sector= 512 bytes. Sectors= 8399520 [4101 MB] [4.1 GB]
esp0: target 2 [period 200ns offset 15 5.00MHz synchronous SCSI]
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 8388315 [4095 MB] [4.1 GB]
declance.c: v0.008 by Linux Mips DECstation task force
eth0: IOASIC onboard LANCE, addr = 08:00:2b:28:f0:a3, irq = 3
Sending BOOTP requests.... OK
IP-Config: Got BOOTP answer from 193.189.250.46, my address is 193.189.250.44
-----------------------------------------------------
I see some more ugly things:
Setting flush to zero for dpkg-source.
Unimplemented exception for insn 4620a0a4 at 0x0046f084 in dpkg-source.
Should send SIGFPE to dpkg-source
Setting flush to zero for dpkg-source.
Unimplemented exception for insn 4620a0a4 at 0x0046f084 in dpkg-source.
Should send SIGFPE to dpkg-source
Setting flush to zero for dpkg-source.
Unimplemented exception for insn 4620a0a4 at 0x0046f084 in dpkg-source.
Should send SIGFPE to dpkg-source
And this ...
Bug in get_wchan
This seems to be a result of buggy "procps" ...
Flo
--
Florian Lohoff flo@rfc822.org +49-5241-470566
... The failure can be random; however, when it does occur, it is
catastrophic and is repeatable ... Cisco Field Notice
next reply other threads:[~2000-01-05 22:15 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2000-01-05 21:18 Florian Lohoff [this message]
-- strict thread matches above, loose matches on Subject: below --
2000-01-06 9:12 Decstation 5000/150 2.3.21 Boot successs Kevin D. Kissell
2000-01-06 9:12 ` Kevin D. Kissell
2000-01-06 14:26 ` Ralf Baechle
2000-01-06 19:10 ` William J. Earl
2000-01-06 18:57 ` William J. Earl
2000-01-06 18:57 ` William J. Earl
2000-01-07 19:09 ` Harald Koerfgen
2000-01-07 23:29 ` Ralf Baechle
2000-01-08 1:30 ` William J. Earl
2000-01-06 15:19 Kevin D. Kissell
2000-01-06 15:19 ` Kevin D. Kissell
2000-01-06 23:54 ` Ralf Baechle
2000-01-07 1:50 ` William J. Earl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20000105221839.A980@paradigm.rfc822.org \
--to=flo@rfc822.org \
--cc=linux@cthulhu.engr.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox