* O200 problem...
@ 2001-01-09 2:16 Predrag Malicevic
2001-01-09 2:16 ` Predrag Malicevic
2001-01-09 2:41 ` Ralf Baechle
0 siblings, 2 replies; 10+ messages in thread
From: Predrag Malicevic @ 2001-01-09 2:16 UTC (permalink / raw)
To: linux-mips
Hi,
I'm trying to install Linux on an Origin 200 and I'm having problems with
booting the kernel (CVS tree linux from oss.sgi.com). I've included below
a console session of my tries to boot the kernel. In two cases below I
used the default kernel configuration but without the SCSI driver. In the
first case I used parameters root=/dev/nfs and nfsroot=.... It reached
'Calibrating delay loop' and then 'Got dbe at 0xffffffff8013e970'. After
that, I guess, some kind of register dump followed (I'm working with MIPS
architecture for the first time). In the second case it reached "TCP:
Hash tables configured". Besides these two tries, I've tried using
different kernel configuration options in the machine selection category
and besides the obvious ones (IP27, IP27 N-Mode and Multi-Processing), I'm
clueless about the meaning of other options.
I would really appreciate some guidance on making the kernel boot...
Thanks in advance and sorry for such a long email.
**** The recorded console session from minicom ****
IP27 PROM SGI Version 5.28 built 11:17:13 AM Sep 24, 1998
Master testing hub interrupts
Testing/Initializing memory
CPU A testing secondary cache (1 MB)
Discovering local IO ...
Using console at /hw/module/1/MotherBoard
Running serial_dma diag (Bridge base = 0x9200000008000000 PCI dev = 2)
Local IO discover DONE.
Running Hub Chip BTE test.
BTE0 completed.
BTE1 completed.
Checking Local Link Connection.
Discovering CrayLink connectivity
Local hub CrayLink is down.
*** Local network link down
Discovered 1 objects (1 hubs, 0 routers)
Waiting for peers to complete discovery.
No other nodes present; becoming global master
Global master is /hw/module/1/slot/MotherBoard
Loading BASEIO prom
Uncompressing segment BASEIO prom
Jumping to entry point 0xa800000001c00140
Numbering nodes...
1 CPUs on 1 nodes found.
Clocks synchronized.
Modules numbered.
Updating module serial numbers.
BASEIO PROM Monitor SGI Version 5.28 built 11:16:22 AM Sep 24, 1998 (BE64)
Sizing caches...
Initializing environment
Initializing software and devices.
Installing Devices...
Running enet_all diag (Bridge base = 0x9200000008000000 PCI dev = 2 Mode = 0)
Running scsi_ram diag (Bridge base = 0x9200000008000000 PCI dev = 0)
Running scsi_dma diag (Bridge base = 0x9200000008000000 PCI dev = 0)
Running scsi_controller diag (Bridge base = 0x9200000008000000 PCI dev = 0)
Walking SCSI Adapter 0 (/hw/module/1/slot/MotherBoard), (pci id 0)
1+ 2- 3- 4- 5- 6- 7- 8- 9- 10- 11- 12- 13- 14- 15- = 1 device(s)
Running scsi_ram diag (Bridge base = 0x9200000008000000 PCI dev = 1)
Running scsi_dma diag (Bridge base = 0x9200000008000000 PCI dev = 1)
Running scsi_controller diag (Bridge base = 0x9200000008000000 PCI dev = 1)
Walking SCSI Adapter 1 (/hw/module/1/slot/MotherBoard), (pci id 1)
1- 2- 3- 4- 5+ 6+ 7- = 2 device(s)
Initializing devices...
Checking hardware inventory...
**** System Configuration and Diagnostics Summary ****
CONFIG:
No. of NODEs enabled = 1
No. of NODEs disabled = 0
No. of CPUs enabled = 1
No. of CPUs disabled = 0
Mem enabled = 64 MB
Mem disabled = 0 MB
No. of RTRs enabled = 0
No. of RTRs disabled = 0
DIAG RESULTS:
ALL DIAGS PASSED!
**** End System Configuration and Diagnostics Summary ****
System Maintenance Menu
1) Start System
2) Install System Software
3) Run Diagnostics
4) Recover System
5) Enter Command Monitor
Option? 5
Command Monitor. Type "exit" to return to the menu.
>> hinv -v
IP27 Node Board, Module 1, Slot MotherBoard
ASIC HUB Rev 3, 90 MHz, (nasid 0)
Processor A: 180 MHz R10000, Rev 2.6, 1M secondary cache, (cpu 0)
R10000FPC Rev 0
Memory on board, 64 MBytes (Standard)
Bank 0, 64 MBytes <-- (Physical Bank 0)
BASEIO IO Board, Module 1, Slot MotherBoard
ASIC BRIDGE Rev 4, (widget 8)
adapter PCI-SCSI Rev 5, (pci id 0)
peripheral SCSI DISK, ID 1, SGI IBM DCHS04Y
adapter PCI-SCSI Rev 5, (pci id 1)
peripheral SCSI TAPE, ID 5, ARCHIVE Python 02779-XXX
peripheral SCSI CDROM, ID 6, TOSHIBA CD-ROM XM-5701TA
adapter IOC3 Rev 1, (pci id 2)
controller multi function SuperIO
controller Ethernet Rev 1
>> hinv -mvvv
location: /hw/module/1/slot/MotherBoard
Part:013-1895-001;Name:PIMM_1XT5_1MB;Serial:GCK618;Revision:F;Group:ff;Capability:ffffffff;Variety:ff;Laser:000000178518;
location: /hw/module/1/slot/MotherBoard
Part:030-1244-001;Name:IP29;Serial:GCH576;Revision:H;Group:ff;Capability:ffffffff;Variety:ff;Laser:00000017a582;
>> version
BASEIO PROM Monitor SGI Version 5.28 built 11:16:22 AM Sep 24, 1998 (BE64)
>> printenv
AutoLoad=No
dbgtty=/dev/tty/ioc30
root=dks0d1s0
nonstop=0
rbaud=19200
SystemPartition=dksc(0,1,8)
OSLoadPartition=dksc(0,1,0)
OSLoader=sash
OSLoadFilename=unix
TimeZone=PST8PDT
console=d
oldConsolePath=/hw/module/1/slot/MotherBoard
gConsoleIn=default
gConsoleOut=default
diskless=0
scsihostid=0
ProbeAllScsi=n
dbaud=9600
volume=80
sgilogo=y
netaddr=192.168.21.231
ConsoleOut=/dev/tty/ioc30
ConsoleIn=/dev/tty/ioc30
cpufreq=180
ConsolePath=/hw/module/1/slot/MotherBoard
>> opts
SGI Version 5.28 built 11:16:22 AM Sep 24, 1998
Libkl was built as follows: -xansi -fullwarn -D_STANDALONE -DMP -DDISCONTIG_PHYSMEM -DNUMA_BASE -DNUMA_PM -DNUMA_TBORROW -DNUMA_MIGR_CONTROL -DNUMA_REPLICATION -DNUMA_REPL_CONTROL -DNUMA_SCHED -DLARGE_CPU_COUNT -DHUB2_NACK_WAR -DBRIDGE_ERROR_INTR_WAR -DMAPPED_KERNEL -DBHV_SYNCH -DHUB_ERR_STS_WAR -DHUB_MIGR_WAR -DNCR16C550 -DTL16PIR552 -DSN0_INTR_BROKEN -DFRU -DSN0_USE_BTE -DBTE_BZERO_WAR -DREV1_BRIDGE_SUPPORTED -DHUB_II_IFDR_WAR -DRTINT_WAR -DPCOUNT_WAR -DBRIDGE_B_DATACORR_WAR -D_KERNEL -DR10000 -D_PAGESZ=16384 -DIP27 -DPROM -U__INLINE_INTRINSICS -DSN0 -I../../../include -I../../../IP27prom -non_shared -elf -64 -G 0 -mips4 -OPT:space=ON -OPT:quad_align_branch_targets=FALSE -OPT:quad_align_with_memops=FALSE -TENV:misalignment=1 -OPT:unroll_times_max=0 -OPT:unroll_size=0 -TENV:kernel -IPA:inline=off:cprop=off:cgi=off:autognum=off -ipa -Wl,-tt1:1 -nostdinc -I/u1/people/ayoung/6.4-patch3292/root/usr/include -O2 -MDupdate Makedepend.SN0 -woff 1685,515,608,658,799,803,852,1048,1233,1499,1068,1185,1209,1505,1506,1692,1174
Libsk was built as follows: -xansi -fullwarn -D_STANDALONE -DMP -DDISCONTIG_PHYSMEM -DNUMA_BASE -DNUMA_PM -DNUMA_TBORROW -DNUMA_MIGR_CONTROL -DNUMA_REPLICATION -DNUMA_REPL_CONTROL -DNUMA_SCHED -DLARGE_CPU_COUNT -DHUB2_NACK_WAR -DBRIDGE_ERROR_INTR_WAR -DMAPPED_KERNEL -DBHV_SYNCH -DHUB_ERR_STS_WAR -DHUB_MIGR_WAR -DNCR16C550 -DTL16PIR552 -DSN0_INTR_BROKEN -DFRU -DSN0_USE_BTE -DBTE_BZERO_WAR -DREV1_BRIDGE_SUPPORTED -DHUB_II_IFDR_WAR -DRTINT_WAR -DPCOUNT_WAR -DBRIDGE_B_DATACORR_WAR -D_KERNEL -DR10000 -D_PAGESZ=16384 -DIP27 -DSN0 -I../../../include -non_shared -elf -64 -G 0 -mips4 -OPT:space=ON -OPT:quad_align_branch_targets=FALSE -OPT:quad_align_with_memops=FALSE -TENV:misalignment=1 -OPT:unroll_times_max=0 -OPT:unroll_size=0 -TENV:kernel -IPA:inline=off:cprop=off:cgi=off:autognum=off -ipa -Wl,-tt1:1 -nostdinc -I/u1/people/ayoung/6.4-patch3292/root/usr/include -O2 -MDupdate Makedepend.SN0 -woff 1685,515,608,658,799,803,852,1048,1233,1499,1068,1185,1209,1505,1506,1692,1174
The IO6prom was built as follows: -xansi -fullwarn -D_STANDALONE -DMP -DDISCONTIG_PHYSMEM -DNUMA_BASE -DNUMA_PM -DNUMA_TBORROW -DNUMA_MIGR_CONTROL -DNUMA_REPLICATION -DNUMA_REPL_CONTROL -DNUMA_SCHED -DLARGE_CPU_COUNT -DHUB2_NACK_WAR -DBRIDGE_ERROR_INTR_WAR -DMAPPED_KERNEL -DBHV_SYNCH -DHUB_ERR_STS_WAR -DHUB_MIGR_WAR -DNCR16C550 -DTL16PIR552 -DSN0_INTR_BROKEN -DFRU -DSN0_USE_BTE -DBTE_BZERO_WAR -DREV1_BRIDGE_SUPPORTED -DHUB_II_IFDR_WAR -DRTINT_WAR -DPCOUNT_WAR -DBRIDGE_B_DATACORR_WAR -D_KERNEL -DR10000 -D_PAGESZ=16384 -DIP27 -DPROM -DNO_tpsc -DSN0 -I../include -I../IP27prom -non_shared -elf -64 -G 0 -mips4 -OPT:space=ON -OPT:quad_align_branch_targets=FALSE -OPT:quad_align_with_memops=FALSE -TENV:misalignment=1 -OPT:unroll_times_max=0 -OPT:unroll_size=0 -TENV:kernel -IPA:inline=off:cprop=off:cgi=off:autognum=off -ipa -Wl,-tt1:1 -nostdinc -I/u1/people/ayoung/6.4-patch3292/root/usr/include -O2 -MDupdate Makedepend.SN0 -woff 1685,515,608,658,799,803,852,1048,1233,1499,1068,1185,1209,1505,1506,1692,1174
>> bootp():vmlinux root=/dev/nfs nfsroot=/\b \b192.168.21.220:/MIPS
Obtaining vmlinux from server itlab4
\b\b\b \b\b\b \b\b\b1160272 \b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\b\b+374720 \b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b\b\b+228460 entry: 0xa80000000013c000
ARCH: SGI-IP27
PROMLIB: ARC firmware Version 64 Revision 0
Discovered 1 cpus on 1 nodes
Total memory probed : 0x4000 pages
Linux version 2.4.0-test11 (pmalic@itlab4) (gcc version egcs-2.91.66 19990314 (egcs-1.1.2 release)) #1 Thu Dec 28 13:36:59 CET 2000
Loading R10000 MMU routines.
CPU revision is: 00000926
Primary instruction cache 32kb, linesize 64 bytes
Primary data cache 32kb, linesize 32 bytes
Secondary cache sized at 1024K, linesize 128
IP27: Running on node 0.
Node 0 has a primary CPU, CPU is running.
Node 0 has no secondary CPU.
Machine is in M mode.
Cpu 0, Nasid 0x0, pcibr_setup(): found partnum= 0xc002...is bridge
CPU 0 clock is 65535MHz.
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/nfs nfsroot=192.168.21.220:/MIPS
Entering 64-bit mode.
Calibrating delay loop... 179.81 BogoMIPS
Got dbe at 0xffffffff8013e970
Cpu 0
$0 : 0000000000000000 ffffffff94201ce0 a8000000001cf680 0000000000000000
$4 : 00000000000000d0 0000000000000039 0000000000000000 a8000000001cf000
$8 : 0000000000004000 0000000000000000 ffffffff80196039 ffffffff801c8828
$12 : 0000000000000010 0000000000000000 000000000000000a ffffffff8012f330
$16 : a8000000011bbe58 0000000000003439 0000000000003048 ffffffff801ca4a8
$20 : 0000000000004000 0000000000000001 0000000000000001 0000000000000000
$24 : 0000000000000000 0000000000000030
$28 : ffffffff80138000 ffffffff8013bdc0 a80000000013c000 ffffffff8013e9ac
Hi : 0000000000000000
Lo : 0000000000003438
epc : ffffffff8013e970
badvaddr: ffffffff801c8828
badvaddr: ffffffff801c8828
Status : 94201ce3
Cause : 0000901c
Cause : 0000901c
Index: 0 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 1 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 2 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 3 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 4 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 5 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 6 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 7 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 8 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 9 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 10 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 11 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 12 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 13 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 14 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 15 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 16 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 17 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 18 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 19 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 20 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 21 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 22 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 23 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 24 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 25 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 26 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 27 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 28 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 29 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 30 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 31 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 32 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 33 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 34 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 35 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 36 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 37 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 38 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 39 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 40 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 41 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 42 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 43 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 44 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 45 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 46 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 47 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 48 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 49 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 50 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 51 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 52 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 53 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 54 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 55 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 56 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 57 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 58 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 59 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 60 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 61 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 62 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 63 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
[ Here the machine hangs and I restart it. For brevity, I've removed the lines that are written to the screen while booting. ]
[ Now I'm tring to boot another kernel: ]
>> bootp():vmlinux
Obtaining vmlinux from server itlab4
\b\b\b \b\b\b \b\b\b1160272 \b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\b\b+374704 \b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b\b\b+228460 entry: 0xa80000000013c000
ARCH: SGI-IP27
PROMLIB: ARC firmware Version 64 Revision 0
Discovered 1 cpus on 1 nodes
Total memory probed : 0x4000 pages
Linux version 2.4.0-test11 (pmalic@itlab4) (gcc version egcs-2.91.66 19990314 (egcs-1.1.2 release)) #2 Thu Dec 28 13:46:29 CET 2000
Loading R10000 MMU routines.
CPU revision is: 00000926
Primary instruction cache 32kb, linesize 64 bytes
Primary data cache 32kb, linesize 32 bytes
Secondary cache sized at 1024K, linesize 128
IP27: Running on node 0.
Node 0 has a primary CPU, CPU is running.
Node 0 has no secondary CPU.
Machine is in M mode.
Cpu 0, Nasid 0x0, pcibr_setup(): found partnum= 0xc002...is bridge
CPU 0 clock is 65535MHz.
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line:
Entering 64-bit mode.
Calibrating delay loop... 179.81 BogoMIPS
Memory: 61496k/65536k available (1133k kernel code, 4040k reserved, 129k data, 216k init)
Dentry-cache hash table entries: 8192 (order: 5, 131072 bytes)
Buffer-cache hash table entries: 4096 (order: 3, 32768 bytes)
Page-cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode-cache hash table entries: 4096 (order: 4, 65536 bytes)
Checking for 'wait' instruction... unavailable.
POSIX conformance testing by UNIFIX
PCI: Probing PCI hardware on host bus 0.
PCI: Fixing isp1020 in [bus:slot.fn] 00:00.0
PCI: Fixing isp1020 in [bus:slot.fn] 00:01.0
PCI: Fixing base addresses for IOC3 device 00:02.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabledttyS00 at iomem 0x9200000008620178 (irq = 0) is a 16550A
Using PHY 31, vendor 0x20005c0, model 0, rev 1.
eth0: MII transceiver found at MDIO address 31, config 3100 status 786f.
IOC3 SSRAM has 128 kbyte.
Found DS1981U NIC registration number 39:e6:02:00:70:5e, CRC 19.
Ethernet address is 08:00:69:05:73:0e.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 256 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 2048)
[ Here the machines hangs again. I've tried many more times with different kernel configurations, but it's the same thing. It either "gets a dbe" or just stops after "TCP: Hash tables ..." ]
--pm
^ permalink raw reply [flat|nested] 10+ messages in thread
* O200 problem...
2001-01-09 2:16 O200 problem Predrag Malicevic
@ 2001-01-09 2:16 ` Predrag Malicevic
2001-01-09 2:41 ` Ralf Baechle
1 sibling, 0 replies; 10+ messages in thread
From: Predrag Malicevic @ 2001-01-09 2:16 UTC (permalink / raw)
To: linux-mips
Hi,
I'm trying to install Linux on an Origin 200 and I'm having problems with
booting the kernel (CVS tree linux from oss.sgi.com). I've included below
a console session of my tries to boot the kernel. In two cases below I
used the default kernel configuration but without the SCSI driver. In the
first case I used parameters root=/dev/nfs and nfsroot=.... It reached
'Calibrating delay loop' and then 'Got dbe at 0xffffffff8013e970'. After
that, I guess, some kind of register dump followed (I'm working with MIPS
architecture for the first time). In the second case it reached "TCP:
Hash tables configured". Besides these two tries, I've tried using
different kernel configuration options in the machine selection category
and besides the obvious ones (IP27, IP27 N-Mode and Multi-Processing), I'm
clueless about the meaning of other options.
I would really appreciate some guidance on making the kernel boot...
Thanks in advance and sorry for such a long email.
**** The recorded console session from minicom ****
IP27 PROM SGI Version 5.28 built 11:17:13 AM Sep 24, 1998
Master testing hub interrupts
Testing/Initializing memory
CPU A testing secondary cache (1 MB)
Discovering local IO ...
Using console at /hw/module/1/MotherBoard
Running serial_dma diag (Bridge base = 0x9200000008000000 PCI dev = 2)
Local IO discover DONE.
Running Hub Chip BTE test.
BTE0 completed.
BTE1 completed.
Checking Local Link Connection.
Discovering CrayLink connectivity
Local hub CrayLink is down.
*** Local network link down
Discovered 1 objects (1 hubs, 0 routers)
Waiting for peers to complete discovery.
No other nodes present; becoming global master
Global master is /hw/module/1/slot/MotherBoard
Loading BASEIO prom
Uncompressing segment BASEIO prom
Jumping to entry point 0xa800000001c00140
Numbering nodes...
1 CPUs on 1 nodes found.
Clocks synchronized.
Modules numbered.
Updating module serial numbers.
BASEIO PROM Monitor SGI Version 5.28 built 11:16:22 AM Sep 24, 1998 (BE64)
Sizing caches...
Initializing environment
Initializing software and devices.
Installing Devices...
Running enet_all diag (Bridge base = 0x9200000008000000 PCI dev = 2 Mode = 0)
Running scsi_ram diag (Bridge base = 0x9200000008000000 PCI dev = 0)
Running scsi_dma diag (Bridge base = 0x9200000008000000 PCI dev = 0)
Running scsi_controller diag (Bridge base = 0x9200000008000000 PCI dev = 0)
Walking SCSI Adapter 0 (/hw/module/1/slot/MotherBoard), (pci id 0)
1+ 2- 3- 4- 5- 6- 7- 8- 9- 10- 11- 12- 13- 14- 15- = 1 device(s)
Running scsi_ram diag (Bridge base = 0x9200000008000000 PCI dev = 1)
Running scsi_dma diag (Bridge base = 0x9200000008000000 PCI dev = 1)
Running scsi_controller diag (Bridge base = 0x9200000008000000 PCI dev = 1)
Walking SCSI Adapter 1 (/hw/module/1/slot/MotherBoard), (pci id 1)
1- 2- 3- 4- 5+ 6+ 7- = 2 device(s)
Initializing devices...
Checking hardware inventory...
**** System Configuration and Diagnostics Summary ****
CONFIG:
No. of NODEs enabled = 1
No. of NODEs disabled = 0
No. of CPUs enabled = 1
No. of CPUs disabled = 0
Mem enabled = 64 MB
Mem disabled = 0 MB
No. of RTRs enabled = 0
No. of RTRs disabled = 0
DIAG RESULTS:
ALL DIAGS PASSED!
**** End System Configuration and Diagnostics Summary ****
System Maintenance Menu
1) Start System
2) Install System Software
3) Run Diagnostics
4) Recover System
5) Enter Command Monitor
Option? 5
Command Monitor. Type "exit" to return to the menu.
>> hinv -v
IP27 Node Board, Module 1, Slot MotherBoard
ASIC HUB Rev 3, 90 MHz, (nasid 0)
Processor A: 180 MHz R10000, Rev 2.6, 1M secondary cache, (cpu 0)
R10000FPC Rev 0
Memory on board, 64 MBytes (Standard)
Bank 0, 64 MBytes <-- (Physical Bank 0)
BASEIO IO Board, Module 1, Slot MotherBoard
ASIC BRIDGE Rev 4, (widget 8)
adapter PCI-SCSI Rev 5, (pci id 0)
peripheral SCSI DISK, ID 1, SGI IBM DCHS04Y
adapter PCI-SCSI Rev 5, (pci id 1)
peripheral SCSI TAPE, ID 5, ARCHIVE Python 02779-XXX
peripheral SCSI CDROM, ID 6, TOSHIBA CD-ROM XM-5701TA
adapter IOC3 Rev 1, (pci id 2)
controller multi function SuperIO
controller Ethernet Rev 1
>> hinv -mvvv
location: /hw/module/1/slot/MotherBoard
Part:013-1895-001;Name:PIMM_1XT5_1MB;Serial:GCK618;Revision:F;Group:ff;Capability:ffffffff;Variety:ff;Laser:000000178518;
location: /hw/module/1/slot/MotherBoard
Part:030-1244-001;Name:IP29;Serial:GCH576;Revision:H;Group:ff;Capability:ffffffff;Variety:ff;Laser:00000017a582;
>> version
BASEIO PROM Monitor SGI Version 5.28 built 11:16:22 AM Sep 24, 1998 (BE64)
>> printenv
AutoLoad=No
dbgtty=/dev/tty/ioc30
root=dks0d1s0
nonstop=0
rbaud=19200
SystemPartition=dksc(0,1,8)
OSLoadPartition=dksc(0,1,0)
OSLoader=sash
OSLoadFilename=unix
TimeZone=PST8PDT
console=d
oldConsolePath=/hw/module/1/slot/MotherBoard
gConsoleIn=default
gConsoleOut=default
diskless=0
scsihostid=0
ProbeAllScsi=n
dbaud=9600
volume=80
sgilogo=y
netaddr=192.168.21.231
ConsoleOut=/dev/tty/ioc30
ConsoleIn=/dev/tty/ioc30
cpufreq=180
ConsolePath=/hw/module/1/slot/MotherBoard
>> opts
SGI Version 5.28 built 11:16:22 AM Sep 24, 1998
Libkl was built as follows: -xansi -fullwarn -D_STANDALONE -DMP -DDISCONTIG_PHYSMEM -DNUMA_BASE -DNUMA_PM -DNUMA_TBORROW -DNUMA_MIGR_CONTROL -DNUMA_REPLICATION -DNUMA_REPL_CONTROL -DNUMA_SCHED -DLARGE_CPU_COUNT -DHUB2_NACK_WAR -DBRIDGE_ERROR_INTR_WAR -DMAPPED_KERNEL -DBHV_SYNCH -DHUB_ERR_STS_WAR -DHUB_MIGR_WAR -DNCR16C550 -DTL16PIR552 -DSN0_INTR_BROKEN -DFRU -DSN0_USE_BTE -DBTE_BZERO_WAR -DREV1_BRIDGE_SUPPORTED -DHUB_II_IFDR_WAR -DRTINT_WAR -DPCOUNT_WAR -DBRIDGE_B_DATACORR_WAR -D_KERNEL -DR10000 -D_PAGESZ=16384 -DIP27 -DPROM -U__INLINE_INTRINSICS -DSN0 -I../../../include -I../../../IP27prom -non_shared -elf -64 -G 0 -mips4 -OPT:space=ON -OPT:quad_align_branch_targets=FALSE -OPT:quad_align_with_memops=FALSE -TENV:misalignment=1 -OPT:unroll_times_max=0 -OPT:unroll_size=0 -TENV:kernel -IPA:inline=off:cprop=off:cgi=off:autognum=off -ipa -Wl,-tt1:1 -nostdinc -I/u1/people/ayoung/6.4-patch3292/root/usr/include -O2 -MDupdate Makedepend.SN0 -woff 1685,515,608,658,799,803,852,1048,1233,1499,1068,1185,1209,1505,1506,1692,1174
Libsk was built as follows: -xansi -fullwarn -D_STANDALONE -DMP -DDISCONTIG_PHYSMEM -DNUMA_BASE -DNUMA_PM -DNUMA_TBORROW -DNUMA_MIGR_CONTROL -DNUMA_REPLICATION -DNUMA_REPL_CONTROL -DNUMA_SCHED -DLARGE_CPU_COUNT -DHUB2_NACK_WAR -DBRIDGE_ERROR_INTR_WAR -DMAPPED_KERNEL -DBHV_SYNCH -DHUB_ERR_STS_WAR -DHUB_MIGR_WAR -DNCR16C550 -DTL16PIR552 -DSN0_INTR_BROKEN -DFRU -DSN0_USE_BTE -DBTE_BZERO_WAR -DREV1_BRIDGE_SUPPORTED -DHUB_II_IFDR_WAR -DRTINT_WAR -DPCOUNT_WAR -DBRIDGE_B_DATACORR_WAR -D_KERNEL -DR10000 -D_PAGESZ=16384 -DIP27 -DSN0 -I../../../include -non_shared -elf -64 -G 0 -mips4 -OPT:space=ON -OPT:quad_align_branch_targets=FALSE -OPT:quad_align_with_memops=FALSE -TENV:misalignment=1 -OPT:unroll_times_max=0 -OPT:unroll_size=0 -TENV:kernel -IPA:inline=off:cprop=off:cgi=off:autognum=off -ipa -Wl,-tt1:1 -nostdinc -I/u1/people/ayoung/6.4-patch3292/root/usr/include -O2 -MDupdate Makedepend.SN0 -woff 1685,515,608,658,799,803,852,1048,1233,1499,1068,1185,1209,1505,1506,1692,1174
The IO6prom was built as follows: -xansi -fullwarn -D_STANDALONE -DMP -DDISCONTIG_PHYSMEM -DNUMA_BASE -DNUMA_PM -DNUMA_TBORROW -DNUMA_MIGR_CONTROL -DNUMA_REPLICATION -DNUMA_REPL_CONTROL -DNUMA_SCHED -DLARGE_CPU_COUNT -DHUB2_NACK_WAR -DBRIDGE_ERROR_INTR_WAR -DMAPPED_KERNEL -DBHV_SYNCH -DHUB_ERR_STS_WAR -DHUB_MIGR_WAR -DNCR16C550 -DTL16PIR552 -DSN0_INTR_BROKEN -DFRU -DSN0_USE_BTE -DBTE_BZERO_WAR -DREV1_BRIDGE_SUPPORTED -DHUB_II_IFDR_WAR -DRTINT_WAR -DPCOUNT_WAR -DBRIDGE_B_DATACORR_WAR -D_KERNEL -DR10000 -D_PAGESZ=16384 -DIP27 -DPROM -DNO_tpsc -DSN0 -I../include -I../IP27prom -non_shared -elf -64 -G 0 -mips4 -OPT:space=ON -OPT:quad_align_branch_targets=FALSE -OPT:quad_align_with_memops=FALSE -TENV:misalignment=1 -OPT:unroll_times_max=0 -OPT:unroll_size=0 -TENV:kernel -IPA:inline=off:cprop=off:cgi=off:autognum=off -ipa -Wl,-tt1:1 -nostdinc -I/u1/people/ayoung/6.4-patch3292/root/usr/include -O2 -MDupdate Makedepend.SN0 -woff 1685,515,608,658,799,803,852,1048,1233,1499,1068,1185,1209,1505,1506,1692,1174
>> bootp():vmlinux root=/dev/nfs nfsroot=/\b \b192.168.21.220:/MIPS
Obtaining vmlinux from server itlab4
\b\b\b \b\b\b \b\b\b1160272 \b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\b\b+374720 \b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b\b\b+228460 entry: 0xa80000000013c000
ARCH: SGI-IP27
PROMLIB: ARC firmware Version 64 Revision 0
Discovered 1 cpus on 1 nodes
Total memory probed : 0x4000 pages
Linux version 2.4.0-test11 (pmalic@itlab4) (gcc version egcs-2.91.66 19990314 (egcs-1.1.2 release)) #1 Thu Dec 28 13:36:59 CET 2000
Loading R10000 MMU routines.
CPU revision is: 00000926
Primary instruction cache 32kb, linesize 64 bytes
Primary data cache 32kb, linesize 32 bytes
Secondary cache sized at 1024K, linesize 128
IP27: Running on node 0.
Node 0 has a primary CPU, CPU is running.
Node 0 has no secondary CPU.
Machine is in M mode.
Cpu 0, Nasid 0x0, pcibr_setup(): found partnum= 0xc002...is bridge
CPU 0 clock is 65535MHz.
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/nfs nfsroot=192.168.21.220:/MIPS
Entering 64-bit mode.
Calibrating delay loop... 179.81 BogoMIPS
Got dbe at 0xffffffff8013e970
Cpu 0
$0 : 0000000000000000 ffffffff94201ce0 a8000000001cf680 0000000000000000
$4 : 00000000000000d0 0000000000000039 0000000000000000 a8000000001cf000
$8 : 0000000000004000 0000000000000000 ffffffff80196039 ffffffff801c8828
$12 : 0000000000000010 0000000000000000 000000000000000a ffffffff8012f330
$16 : a8000000011bbe58 0000000000003439 0000000000003048 ffffffff801ca4a8
$20 : 0000000000004000 0000000000000001 0000000000000001 0000000000000000
$24 : 0000000000000000 0000000000000030
$28 : ffffffff80138000 ffffffff8013bdc0 a80000000013c000 ffffffff8013e9ac
Hi : 0000000000000000
Lo : 0000000000003438
epc : ffffffff8013e970
badvaddr: ffffffff801c8828
badvaddr: ffffffff801c8828
Status : 94201ce3
Cause : 0000901c
Cause : 0000901c
Index: 0 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 1 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 2 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 3 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 4 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 5 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 6 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 7 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 8 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 9 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 10 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 11 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 12 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 13 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 14 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 15 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 16 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 17 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 18 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 19 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 20 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 21 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 22 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 23 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 24 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 25 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 26 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 27 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 28 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 29 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 30 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 31 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 32 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 33 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 34 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 35 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 36 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 37 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 38 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 39 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 40 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 41 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 42 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 43 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 44 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 45 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 46 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 47 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 48 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 49 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 50 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 51 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 52 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 53 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 54 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 55 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 56 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 57 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 58 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 59 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 60 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 61 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 62 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
Index: 63 pgmask=00000000 va=c0000fff80000000 asid=00 [pa=000000 c=0 d=0 v=0 g=0] [pa=000000 c=0 d=0 v=0 g=0]
[ Here the machine hangs and I restart it. For brevity, I've removed the lines that are written to the screen while booting. ]
[ Now I'm tring to boot another kernel: ]
>> bootp():vmlinux
Obtaining vmlinux from server itlab4
\b\b\b \b\b\b \b\b\b1160272 \b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\b\b+374704 \b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b\b\b+228460 entry: 0xa80000000013c000
ARCH: SGI-IP27
PROMLIB: ARC firmware Version 64 Revision 0
Discovered 1 cpus on 1 nodes
Total memory probed : 0x4000 pages
Linux version 2.4.0-test11 (pmalic@itlab4) (gcc version egcs-2.91.66 19990314 (egcs-1.1.2 release)) #2 Thu Dec 28 13:46:29 CET 2000
Loading R10000 MMU routines.
CPU revision is: 00000926
Primary instruction cache 32kb, linesize 64 bytes
Primary data cache 32kb, linesize 32 bytes
Secondary cache sized at 1024K, linesize 128
IP27: Running on node 0.
Node 0 has a primary CPU, CPU is running.
Node 0 has no secondary CPU.
Machine is in M mode.
Cpu 0, Nasid 0x0, pcibr_setup(): found partnum= 0xc002...is bridge
CPU 0 clock is 65535MHz.
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line:
Entering 64-bit mode.
Calibrating delay loop... 179.81 BogoMIPS
Memory: 61496k/65536k available (1133k kernel code, 4040k reserved, 129k data, 216k init)
Dentry-cache hash table entries: 8192 (order: 5, 131072 bytes)
Buffer-cache hash table entries: 4096 (order: 3, 32768 bytes)
Page-cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode-cache hash table entries: 4096 (order: 4, 65536 bytes)
Checking for 'wait' instruction... unavailable.
POSIX conformance testing by UNIFIX
PCI: Probing PCI hardware on host bus 0.
PCI: Fixing isp1020 in [bus:slot.fn] 00:00.0
PCI: Fixing isp1020 in [bus:slot.fn] 00:01.0
PCI: Fixing base addresses for IOC3 device 00:02.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabledttyS00 at iomem 0x9200000008620178 (irq = 0) is a 16550A
Using PHY 31, vendor 0x20005c0, model 0, rev 1.
eth0: MII transceiver found at MDIO address 31, config 3100 status 786f.
IOC3 SSRAM has 128 kbyte.
Found DS1981U NIC registration number 39:e6:02:00:70:5e, CRC 19.
Ethernet address is 08:00:69:05:73:0e.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 256 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 2048)
[ Here the machines hangs again. I've tried many more times with different kernel configurations, but it's the same thing. It either "gets a dbe" or just stops after "TCP: Hash tables ..." ]
--pm
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: O200 problem...
2001-01-09 2:16 O200 problem Predrag Malicevic
2001-01-09 2:16 ` Predrag Malicevic
@ 2001-01-09 2:41 ` Ralf Baechle
2001-01-09 2:41 ` Ralf Baechle
` (2 more replies)
1 sibling, 3 replies; 10+ messages in thread
From: Ralf Baechle @ 2001-01-09 2:41 UTC (permalink / raw)
To: Predrag Malicevic; +Cc: linux-mips
On Tue, Jan 09, 2001 at 03:16:20AM +0100, Predrag Malicevic wrote:
> I'm trying to install Linux on an Origin 200 and I'm having problems with
> booting the kernel (CVS tree linux from oss.sgi.com). I've included below
> a console session of my tries to boot the kernel. In two cases below I
> used the default kernel configuration but without the SCSI driver. In the
> first case I used parameters root=/dev/nfs and nfsroot=.... It reached
> 'Calibrating delay loop' and then 'Got dbe at 0xffffffff8013e970'. After
> that, I guess, some kind of register dump followed (I'm working with MIPS
> architecture for the first time). In the second case it reached "TCP:
> Hash tables configured". Besides these two tries, I've tried using
> different kernel configuration options in the machine selection category
> and besides the obvious ones (IP27, IP27 N-Mode and Multi-Processing), I'm
> clueless about the meaning of other options.
> CPU 0 clock is 65535MHz.
Something's fishy. I guess ;-)
> [ Here the machines hangs again. I've tried many more times with different kernel configurations, but it's the same thing. It either "gets a dbe" or just stops after "TCP: Hash tables ..." ]
I assume it's your specific configuration that's triggering the problem.
I've got the current CVS kernel running on 2 dual processor O200 and a
32 processor Origin 2000, so it can't be all broken. I think all known
to be working configuratons are machines with significantly more memory;
dunno if that's really related or not.
Thanks for sending the oops message; however without additional data
provided I can't use it. Can you please point please put the kernel image
that resulted in the oops online?
Ralf
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: O200 problem...
2001-01-09 2:41 ` Ralf Baechle
@ 2001-01-09 2:41 ` Ralf Baechle
2001-01-09 10:23 ` Predrag Malicevic
2001-01-12 14:20 ` Predrag Malicevic
2 siblings, 0 replies; 10+ messages in thread
From: Ralf Baechle @ 2001-01-09 2:41 UTC (permalink / raw)
To: Predrag Malicevic; +Cc: linux-mips
On Tue, Jan 09, 2001 at 03:16:20AM +0100, Predrag Malicevic wrote:
> I'm trying to install Linux on an Origin 200 and I'm having problems with
> booting the kernel (CVS tree linux from oss.sgi.com). I've included below
> a console session of my tries to boot the kernel. In two cases below I
> used the default kernel configuration but without the SCSI driver. In the
> first case I used parameters root=/dev/nfs and nfsroot=.... It reached
> 'Calibrating delay loop' and then 'Got dbe at 0xffffffff8013e970'. After
> that, I guess, some kind of register dump followed (I'm working with MIPS
> architecture for the first time). In the second case it reached "TCP:
> Hash tables configured". Besides these two tries, I've tried using
> different kernel configuration options in the machine selection category
> and besides the obvious ones (IP27, IP27 N-Mode and Multi-Processing), I'm
> clueless about the meaning of other options.
> CPU 0 clock is 65535MHz.
Something's fishy. I guess ;-)
> [ Here the machines hangs again. I've tried many more times with different kernel configurations, but it's the same thing. It either "gets a dbe" or just stops after "TCP: Hash tables ..." ]
I assume it's your specific configuration that's triggering the problem.
I've got the current CVS kernel running on 2 dual processor O200 and a
32 processor Origin 2000, so it can't be all broken. I think all known
to be working configuratons are machines with significantly more memory;
dunno if that's really related or not.
Thanks for sending the oops message; however without additional data
provided I can't use it. Can you please point please put the kernel image
that resulted in the oops online?
Ralf
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: O200 problem...
2001-01-09 2:41 ` Ralf Baechle
2001-01-09 2:41 ` Ralf Baechle
@ 2001-01-09 10:23 ` Predrag Malicevic
2001-01-09 10:23 ` Predrag Malicevic
2001-01-12 14:20 ` Predrag Malicevic
2 siblings, 1 reply; 10+ messages in thread
From: Predrag Malicevic @ 2001-01-09 10:23 UTC (permalink / raw)
To: Ralf Baechle; +Cc: linux-mips
On Tue, 9 Jan 2001, Ralf Baechle wrote:
> > CPU 0 clock is 65535MHz.
>
> Something's fishy. I guess ;-)
It is really strange... 65 GHz? ;)
> Thanks for sending the oops message; however without additional data
> provided I can't use it. Can you please point please put the kernel image
> that resulted in the oops online?
Ok, I'll put it by Thursday (I can't come to the machines earlier).
P.S. I was first building kernels on an i386 system running RedHat 7.0,
but later on I switched to a faster machine running Slackware 7.0. In both
cases I used binutils-mips64-linux-2.9.5-3/egcs-mips64-linux-1.1.2-3 RPMs
from oss.sgi.com. Kernels from both machines behaved the same way.
--pm
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: O200 problem...
2001-01-09 10:23 ` Predrag Malicevic
@ 2001-01-09 10:23 ` Predrag Malicevic
0 siblings, 0 replies; 10+ messages in thread
From: Predrag Malicevic @ 2001-01-09 10:23 UTC (permalink / raw)
To: Ralf Baechle; +Cc: linux-mips
On Tue, 9 Jan 2001, Ralf Baechle wrote:
> > CPU 0 clock is 65535MHz.
>
> Something's fishy. I guess ;-)
It is really strange... 65 GHz? ;)
> Thanks for sending the oops message; however without additional data
> provided I can't use it. Can you please point please put the kernel image
> that resulted in the oops online?
Ok, I'll put it by Thursday (I can't come to the machines earlier).
P.S. I was first building kernels on an i386 system running RedHat 7.0,
but later on I switched to a faster machine running Slackware 7.0. In both
cases I used binutils-mips64-linux-2.9.5-3/egcs-mips64-linux-1.1.2-3 RPMs
from oss.sgi.com. Kernels from both machines behaved the same way.
--pm
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: O200 problem...
2001-01-09 2:41 ` Ralf Baechle
2001-01-09 2:41 ` Ralf Baechle
2001-01-09 10:23 ` Predrag Malicevic
@ 2001-01-12 14:20 ` Predrag Malicevic
2001-01-12 14:20 ` Predrag Malicevic
2001-01-16 6:10 ` Ralf Baechle
2 siblings, 2 replies; 10+ messages in thread
From: Predrag Malicevic @ 2001-01-12 14:20 UTC (permalink / raw)
To: Ralf Baechle; +Cc: linux-mips
On Tue, 9 Jan 2001, Ralf Baechle wrote:
> Thanks for sending the oops message; however without additional data
> provided I can't use it. Can you please point please put the kernel image
> that resulted in the oops online?
http://lothar.penguinpowered.com/o200.tar.gz
You'll find everything in the archive: vmlinux, System.map, kernel
configuration file and a new session log with 'oops messages'.
Thanks,
--pm
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: O200 problem...
2001-01-12 14:20 ` Predrag Malicevic
@ 2001-01-12 14:20 ` Predrag Malicevic
2001-01-16 6:10 ` Ralf Baechle
1 sibling, 0 replies; 10+ messages in thread
From: Predrag Malicevic @ 2001-01-12 14:20 UTC (permalink / raw)
To: Ralf Baechle; +Cc: linux-mips
On Tue, 9 Jan 2001, Ralf Baechle wrote:
> Thanks for sending the oops message; however without additional data
> provided I can't use it. Can you please point please put the kernel image
> that resulted in the oops online?
http://lothar.penguinpowered.com/o200.tar.gz
You'll find everything in the archive: vmlinux, System.map, kernel
configuration file and a new session log with 'oops messages'.
Thanks,
--pm
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: O200 problem...
2001-01-12 14:20 ` Predrag Malicevic
2001-01-12 14:20 ` Predrag Malicevic
@ 2001-01-16 6:10 ` Ralf Baechle
2001-01-16 6:10 ` Ralf Baechle
1 sibling, 1 reply; 10+ messages in thread
From: Ralf Baechle @ 2001-01-16 6:10 UTC (permalink / raw)
To: Predrag Malicevic; +Cc: linux-mips
On Fri, Jan 12, 2001 at 03:20:25PM +0100, Predrag Malicevic wrote:
> > Thanks for sending the oops message; however without additional data
> > provided I can't use it. Can you please point please put the kernel image
> > that resulted in the oops online?
>
> http://lothar.penguinpowered.com/o200.tar.gz
>
> You'll find everything in the archive: vmlinux, System.map, kernel
> configuration file and a new session log with 'oops messages'.
I just examined your crash data; it's not obvious why what is causing the
DBE exception that is making your kernel die. It seems to happen in
the SCSI code; I wonder if any of the devices you have on the SCSI bus
especially on the second hostadapter is making the Qlogic driver go nuts.
Can you retry your kernel with devices from this bus removed?
Thanks,
Ralf
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: O200 problem...
2001-01-16 6:10 ` Ralf Baechle
@ 2001-01-16 6:10 ` Ralf Baechle
0 siblings, 0 replies; 10+ messages in thread
From: Ralf Baechle @ 2001-01-16 6:10 UTC (permalink / raw)
To: Predrag Malicevic; +Cc: linux-mips
On Fri, Jan 12, 2001 at 03:20:25PM +0100, Predrag Malicevic wrote:
> > Thanks for sending the oops message; however without additional data
> > provided I can't use it. Can you please point please put the kernel image
> > that resulted in the oops online?
>
> http://lothar.penguinpowered.com/o200.tar.gz
>
> You'll find everything in the archive: vmlinux, System.map, kernel
> configuration file and a new session log with 'oops messages'.
I just examined your crash data; it's not obvious why what is causing the
DBE exception that is making your kernel die. It seems to happen in
the SCSI code; I wonder if any of the devices you have on the SCSI bus
especially on the second hostadapter is making the Qlogic driver go nuts.
Can you retry your kernel with devices from this bus removed?
Thanks,
Ralf
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2001-01-16 6:11 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-01-09 2:16 O200 problem Predrag Malicevic
2001-01-09 2:16 ` Predrag Malicevic
2001-01-09 2:41 ` Ralf Baechle
2001-01-09 2:41 ` Ralf Baechle
2001-01-09 10:23 ` Predrag Malicevic
2001-01-09 10:23 ` Predrag Malicevic
2001-01-12 14:20 ` Predrag Malicevic
2001-01-12 14:20 ` Predrag Malicevic
2001-01-16 6:10 ` Ralf Baechle
2001-01-16 6:10 ` Ralf Baechle
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox