XF86Config & startup log

XF86Config & startup log

[Zhang Fuxin]

[-- Attachment #1: Type: text/plain, Size: 4236 bytes --]

hi,Hartvig Ekner，
   Here are my files.
   but the build process can't be described in short:(.
   I started from a rpm package from redhat7(or similar standard distribution),did
everything to make it cross-compile,very ugly and painful.Basically,
     repeat if errors
       make World &> out,
       read out,correct errors it reports
     until done
   beside changes to config files,i remember there were problems due to the sequence
when it cross-builded a problem and wanted to execute it.
  From the list,I think someone else should have more elegant way. And i will try
H.J.Lu's source in oss.sgi.com when having time.

在 2001-12-06 21:10:00 you wrote：
>Hello Zhang,
>
>I would be very interested in trying to get the video support (using G200
>as you have) up and running on our Malta board with full X.
>
>Could you provide me with some more info, so that I can try to repeat it?
>E.g. the /etc/X11/XF86Config file, exactly what X server did you use,
>startup output when starting the server (cut & paste, or from
>/var/log/XFree86.0.log or similar).
>
>Any information much appreciated!
>
>/Hartvig
>
>Zhang Fuxin writes:
>>
>> hi,Alinux-mips,
>>    Finally the 2.4 kernel seems calm down,I pay some time to cleanup
>> my code for algorithmics p6032 board.
>>    Although it may still very experimental,i make it public here
>> hoping that it will save  sometime for someone else.
>>    You can get the source diff
>>    (against sgi cvs linux_2_4_branch Dec.3,about 50k) from:
>>    http://159.226.40.150/godson/mips-2.4.16-zfx.diff.gz
>>      (sorry i haven't a dns name)
>>
>>   I am eager to get some feedback.
>>
>>   There are Changelog and README in arch/mips/algor/
>>
>>  for your convenience,READ is post here:
>>
>>     This is my code for algor p6032,many of them borrowed/inherit from
>> algorithmics' 2.2 kernel(and others),but with a lot of cleanup(i think:)
>> I have tried my best to make minimum changes to generic code.
>>
>>   Testing platform:
>>       Algorithmics p6032 eval board,idt RC64474 CPU
>>       (with a 40G IBM 7200rpm ide disk,256M sdram memory,matrox G200 video
>>        card)
>>       Software: H.J.Lu's cross compile toolchain & redhat 7.1 port)
>>   Features:
>>       1.new time,new irq,new pci,auto-pci,etc
>>       see this list:
>>       CONFIG_PCI=y
>>       CONFIG_NEW_PCI=y
>>       CONFIG_PCI_AUTO=y
>>       CONFIG_NEW_IRQ=y
>>       CONFIG_I8259=y
>>       CONFIG_HAVE_STD_PC_SERIAL_PORT=y
>>       CONFIG_NEW_TIME_C=y
>>       CONFIG_BOARD_SCACHE=y
>>       CONFIG_PC_KEYB=y
>>       CONFIG_NONCOHERENT_IO=y
>>
>>       2. frame buffer for matrox cards(that means you can use X windows)
>>       3. a flash driver for easily rewriting of on board flash
>>       4. ide,ethernet(pcnet32) with dma
>>       5. with 2.4.16 patch(filesystem corruption fixed)
>>
>>    TODO:
>>       1. more test,e.g. with ltp or something
>>          I have run 2.4.8 for some time with good stablity,but this upgrade is
>> 	 done in one day,with many cleanups
>> 	 it will surely contain some bugs
>>       2. on board cache support
>>          i haven't decided a elegant way to support the board cache
>>       3.
>>
>>    Important Notes:
>>       1. the command line is fixed at arch/mips/kernel/setup.c for my convenience:),you should change to fit your need or comment it out and use pmon args
>>       2. PIIX support for ide must be choosed,or the irq probe will lead to
>>          endless interruption.
>>
>>    More information may present in Changelog.zfx.
>>
>>
>>                    2001.12.05 Zhang Fuxin, <fxzhang@ict.ac.cn>
>> 		   Institute of Computing Technology,Chinese Academy of Sciences
>>
>> have to get some sleep now:)
>>
>> Regards
>>             Zhang Fuxin
>>             fxzhang@ict.ac.cn
>>
>
>
>--
> _    _   _____  ____     Hartvig Ekner        Mailto:hartvige@mips.com
> |\  /| | |____)(____                          Direct: +45 4486 5503
> | \/ | | |     _____)    MIPS Denmark         Switch: +45 4486 5555
>T E C H N O L O G I E S   http://www.mips.com  Fax...: +45 4486 5556

Regards
            Zhang Fuxin
            fxzhang@ict.ac.cn

[-- Attachment #2: XF86Config-4 --]
[-- Type: application/octet-stream, Size: 5344 bytes --]


# File generated by XFdrake.

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

Section "Files"

    RgbPath	"/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.

   FontPath    "/usr/X11R6/lib/X11/fonts/misc"
   FontPath    "/usr/share/fonts/default/Type1"
   FontPath    "/usr/share/fonts/default/ghostscript"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

    # Uncomment this to cause a core dump at the spot where a signal is
    # received.  This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    #NoTrapSignals

    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    #DontZap

    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
    # sequences.  This allows clients to receive these key events.
    #DontZoom

    # This  allows  the  server  to start up even if the
    # mouse device can't be opened/initialised.
    AllowMouseOpenFail

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Keyboard section
# **********************************************************************

Section "InputDevice"

    Identifier "Keyboard1"
    Driver      "Keyboard"
    Option "AutoRepeat"  "250 30"

    #Option "XkbRules" "xfree86"
    #Option "XkbModel" "pc105"
    #Option "XkbLayout" "us"

EndSection

# **********************************************************************
# Pointer section
# **********************************************************************

Section "InputDevice"

    Identifier  "Mouse1"
    Driver      "mouse"
    Option "Protocol"    "PS/2"
    Option "Device"      "/dev/psaux"
    #Option "Emulate3Buttons"
    #Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection



Section "Module"

# This loads the DBE extension module.

#    Load	"dbe"


# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.

    #SubSection	"extmod"
	#Option	"omit xfree86-dga"
    #EndSubSection

# This loads the Type1 and FreeType font modules

#    Load	"type1"
#    Load	"freetype"
EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName  "Monitor Model"


# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    HorizSync  30.0-54.0


# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    VertRefresh 50.0-110.0


EndSection



# **********************************************************************
# Graphics device section
# **********************************************************************

#Section "Device"
#    Identifier "Generic VGA"
#    Driver     "vga"
#EndSection

Section "Device"
    Identifier  "RIVA TNT2"
    VendorName  "Unknown"
    BoardName   "Unknown"
    Driver      "fbdev"
    VideoRam    16384
    # Clock lines
    BusID       "PCI:0:0e:0"

    # Uncomment following option if you see a big white block        
    # instead of the cursor!                                          
    #    Option      "sw_cursor"

# Option      "DPMS"
EndSection



# **********************************************************************
# Screen sections
# **********************************************************************


Section "Screen"
    Identifier "screen1"
    Device      "RIVA TNT2"
    Monitor     "Monitor0"
    DefaultColorDepth 24
    Subsection "Display"
        Depth       8
        Modes       "800x600" "640x400"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       32
        Modes       "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
EndSection


[-- Attachment #3: out --]
[-- Type: application/octet-stream, Size: 3161 bytes --]



XFree86 Version 4.1.0 (Red Hat Linux release: 4.1.0-0.9.0.1) / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 2 June 2001
	If the server is older than 6-12 months, or if your card is
	newer than the above date, look for a newer version before
	reporting problems.  (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.6 i686 [ELF] 
(==) Log file: "/var/log/XFree86.0.log", Time: Tue Apr 17 02:06:13 2001
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) No Layout section.  Using the first Screen section.
(**) |-->Screen "screen1" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "RIVA TNT2"
(==) |-->Input Device "Mouse1"
(==) |-->Input Device "Keyboard1"
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/default/ghostscript".
	Entry deleted from font path.
	(Run 'mkfontdir' on "/usr/share/fonts/default/ghostscript").
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc,/usr/share/fonts/default/Type1"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(--) using VT number 4

(--) PCI: (0:14:0) unknown vendor (0x2b10) unknown chipset (0x2005) rev 1, Mem @ 0x00c06e00/14, 0x00008000/23, I/O @ 0x8000008/24, BIOS @ 0x01006800/16
(II) NV: driver for NVIDIA chipsets: RIVA128, RIVATNT, RIVATNT2,
	RIVATNT2 (A), RIVATNT2 (B), RIVATNT2 (Ultra), RIVATNT2 (Vanta),
	RIVATNT2 M64, RIVATNT2 (Integrated), GeForce 256, GeForce DDR,
	Quadro, GeForce2 GTS, GeForce2 GTS (rev 1), GeForce2 ultra,
	Quadro 2 Pro, GeForce2 MX, GeForce2 MX DDR, Quadro 2 MXR,
	GeForce 2 Go, GeForce3, GeForce3 (rev 1), GeForce3 (rev 2),
	GeForce3 (rev 3)
(II) FBDev: driver for framebuffer: fbdev
(II) FBDev(0): using default device
(II) Running in FRAMEBUFFER Mode
(**) FBDev(0): Depth 24, (--) framebuffer bpp 32
(==) FBDev(0): RGB weight 888
(==) FBDev(0): Default visual is TrueColor
(==) FBDev(0): Using gamma correction (1.0, 1.0, 1.0)
(II) FBDev(0): Hardware: MATROX (vidmem: 16384k)
(II) FBDev(0): Checking Modes against framebuffer device...
(II) FBDev(0): 	mode "800x600" ok
(II) FBDev(0): 	mode "640x480" ok
(II) FBDev(0): Checking Modes against monitor...
(--) FBDev(0): Virtual size is 800x600 (pitch 800)
(**) FBDev(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
(**) FBDev(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(==) FBDev(0): DPI set to (75, 75)
(**) FBDev(0): Using "Shadow Framebuffer"
(--) Depth 24 pixmap format is 32 bpp
(==) FBDev(0): Backing store disabled
error opening security policy file /etc/X11/xserver/SecurityPolicy
(**) Mouse1: Protocol: "PS/2"
(**) Mouse1: Core Pointer
(==) Mouse1: Buttons: 3
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
Warning: locale not supported by C library, locale unchanged
Warning: locale not supported by Xlib, locale set to C
Warning: X locale modifiers not supported, using default
Failed to open input method