-mips2 amd -mcpu=r4600 for Rc32334..?

-mips2 amd -mcpu=r4600 for Rc32334..?

[atul srivastava]

Hello,

here is a quick question ..?

what should be appropiate compilation flag for MIPS 
RC32134/Rc32334..?
currently i am trying in arch/mips/Makefile
  GCCFLAGS        += -mcpu=r4600 -mips2 -Wa,--trap

But I doubt it for two reasons.

1.I think mips1 should be used instead of mips2 because
if you follow mips literature mips 2* and 3* series fall under 
MIPS1 category.
4* and bigger series comes under MIP2 and MIPS3 series.

for example CONFIG_CPU_LLSC is not enabled for all MIPS1
category processors.

2.Is -mcpu=r4600 switch is alright for Rc32334?
I was just wondering why i should use -mcpu=r4600 for RC323334


Best Regards,
Atul
__________________________________________________________
Give your Company an email address like
ravi @ ravi-exports.com.  Sign up for Rediffmail Pro today!
Know more. http://www.rediffmailpro.com/signup/

Re: -mips2 amd -mcpu=r4600 for Rc32334..?

[Ralf Baechle]

On Mon, Nov 18, 2002 at 11:43:17AM -0000, atul srivastava wrote:

> what should be appropiate compilation flag for MIPS 
> RC32134/Rc32334..?
> currently i am trying in arch/mips/Makefile
>   GCCFLAGS        += -mcpu=r4600 -mips2 -Wa,--trap
> 
> But I doubt it for two reasons.
> 
> 1.I think mips1 should be used instead of mips2 because
> if you follow mips literature mips 2* and 3* series fall under 
> MIPS1 category.

Exceptions such at the R3900 which is an almost-mips2 processor ...

> 4* and bigger series comes under MIP2 and MIPS3 series.
> 
> for example CONFIG_CPU_LLSC is not enabled for all MIPS1
> category processors.

CONFIG_CPU_LLSC is mandatory for for multiprocessor systems.  For uni-
processor systems such as your's CONFIG_CPU_LLSC should be enabled for
best performance - but only if your CPU actually has ll / sc instructions.

The kernel emulates ll/sc instructions if they're not available in
hardware.  The emulation is not performance optimal so should be avoided
by using the appropriate setting of CONFIG_CPU_LLSC.

> 2.Is -mcpu=r4600 switch is alright for Rc32334?

Not knowing the Rc32334 in detail I can only tell you the switch is
technically correct.  It may or may not be optimal.

> I was just wondering why i should use -mcpu=r4600 for RC323334

-mcpu=<cpu> is just a performance optimization option.  Gcc doesn't use
this value very well to optimize the code but it's making some minor
difference.  For most <cpu> values the code generator doesn't use
instructions that are specific to CPU, so there's little risk playing
with the value.  Gcc doesn't know the Rc32334 as value so you'll have to
pick a CPU that is as similar possible.

  Ralf