From: "Krishnakumar. R" <krishnakumar@naturesoft.net>
To: "Indukumar Ilangovan" <iilangov@cisco.com>
Cc: <linux-mips@linux-mips.org>
Subject: Re: [OT] cross-compiler problem
Date: Thu, 9 Jan 2003 21:01:12 +0530 [thread overview]
Message-ID: <200301092101.12871.krishnakumar@naturesoft.net> (raw)
In-Reply-To: <040b01c2b7f2$56ff0f40$a78b4d0a@apac.cisco.com>
Hi,
Have you changed the /usr/src/linux/include/asm
link to point to the asm-mips.
IMHO you should do it.
Hope it helps
Regards
KK
On Thursday 09 January 2003 08:48 pm, you wrote:
> Hi All,
>
> I tried to build cross compiler on Red Hat Linux
> Kernel 2.4.2-2 on an i686.
> I use binutils-2.13, gcc-3.2, glibc-2.2.5,
> glibc-2.2.5-mips-build-gmon.diff, glibc-linuxthreads.tar.gz.
> I followed the instructions from
> http://www.ltc.com/~brad/mips/mipsel-linux-cross-toolchain-building.txt
>
> I installed binutils without any problems.
>
> While compiling glibc2.2.5 I get the following error.
>
> ../sysdeps/unix/syscall.S: Assembler messages:
> ../sysdeps/unix/syscall.S:28: Error: absolute expression required `li'
> make[2]: *** [/home/iilangov/crossGCC/mips/mips-glibc/misc/syscall.o] Error
> 1
> make[2]: Leaving directory `/home/iilangov/crossGCC/mips/glibc-2.2.5/misc'
> make[1]: *** [misc/subdir_lib] Error 2
> make[1]: Leaving directory `/home/iilangov/crossGCC/mips/glibc-2.2.5'
> make: *** [all] Error 2
>
> I have "asm/unistd.h" in the include path, still this problem is happening.
> Do you guys have any clue ?
>
> Thanks in Advance !
> Indu
>
>
> ----- Original Message -----
> From: "Alexandre Oliva" <aoliva@redhat.com>
> To: "Khantharat Anekboon" <dfos1@hotmail.com>
> Cc: <crossgcc@sources.redhat.com>
> Sent: Saturday, December 28, 2002 12:22 PM
> Subject: Re: cross-compiler problem
>
> | On Dec 28, 2002, "Khantharat Anekboon" <dfos1@hotmail.com> wrote:
> | > ../sysdeps/unix/syscall.S:28: Error: absolute expression required 'li'
> |
> | Looks like you're missing the kernel headers where the syscall numbers
> | are defined. (.../include/asm/unistd.h)
> |
> | --
> | Alexandre Oliva Enjoy Guarana', see http://www.ic.unicamp.br/~oliva/
> | Red Hat GCC Developer aoliva@{redhat.com, gcc.gnu.org}
> | CS PhD student at IC-Unicamp oliva@{lsd.ic.unicamp.br, gnu.org}
> | Free Software Evangelist Professional serial bug killer
> |
> | ------
> | Want more information? See the CrossGCC FAQ,
>
> http://www.objsw.com/CrossGCC/
>
> | Want to unsubscribe? Send a note to
>
> crossgcc-unsubscribe@sources.redhat.com
>
> ********************************************************
> Indukumar Ilangovan
> HCL-Cisco Offshore development center,
> 49-50, Nelson Manickam Road, Chennai - 600029 , India .
> TEL: +91-44-2374 1939 x 2215 FAX: +91-44-3741038
> Email :iilangov@cisco.com
WARNING: multiple messages have this Message-ID (diff)
From: "Krishnakumar. R" <krishnakumar@naturesoft.net>
To: Indukumar Ilangovan <iilangov@cisco.com>
Cc: linux-mips@linux-mips.org
Subject: Re: [OT] cross-compiler problem
Date: Thu, 9 Jan 2003 21:01:12 +0530 [thread overview]
Message-ID: <200301092101.12871.krishnakumar@naturesoft.net> (raw)
Message-ID: <20030109153112.QmJQr7sgdR-BvDkpXEUmPnrwrXp-wuD6hYBLQYVUMK4@z> (raw)
In-Reply-To: <040b01c2b7f2$56ff0f40$a78b4d0a@apac.cisco.com>
Hi,
Have you changed the /usr/src/linux/include/asm
link to point to the asm-mips.
IMHO you should do it.
Hope it helps
Regards
KK
On Thursday 09 January 2003 08:48 pm, you wrote:
> Hi All,
>
> I tried to build cross compiler on Red Hat Linux
> Kernel 2.4.2-2 on an i686.
> I use binutils-2.13, gcc-3.2, glibc-2.2.5,
> glibc-2.2.5-mips-build-gmon.diff, glibc-linuxthreads.tar.gz.
> I followed the instructions from
> http://www.ltc.com/~brad/mips/mipsel-linux-cross-toolchain-building.txt
>
> I installed binutils without any problems.
>
> While compiling glibc2.2.5 I get the following error.
>
> ../sysdeps/unix/syscall.S: Assembler messages:
> ../sysdeps/unix/syscall.S:28: Error: absolute expression required `li'
> make[2]: *** [/home/iilangov/crossGCC/mips/mips-glibc/misc/syscall.o] Error
> 1
> make[2]: Leaving directory `/home/iilangov/crossGCC/mips/glibc-2.2.5/misc'
> make[1]: *** [misc/subdir_lib] Error 2
> make[1]: Leaving directory `/home/iilangov/crossGCC/mips/glibc-2.2.5'
> make: *** [all] Error 2
>
> I have "asm/unistd.h" in the include path, still this problem is happening.
> Do you guys have any clue ?
>
> Thanks in Advance !
> Indu
>
>
> ----- Original Message -----
> From: "Alexandre Oliva" <aoliva@redhat.com>
> To: "Khantharat Anekboon" <dfos1@hotmail.com>
> Cc: <crossgcc@sources.redhat.com>
> Sent: Saturday, December 28, 2002 12:22 PM
> Subject: Re: cross-compiler problem
>
> | On Dec 28, 2002, "Khantharat Anekboon" <dfos1@hotmail.com> wrote:
> | > ../sysdeps/unix/syscall.S:28: Error: absolute expression required 'li'
> |
> | Looks like you're missing the kernel headers where the syscall numbers
> | are defined. (.../include/asm/unistd.h)
> |
> | --
> | Alexandre Oliva Enjoy Guarana', see http://www.ic.unicamp.br/~oliva/
> | Red Hat GCC Developer aoliva@{redhat.com, gcc.gnu.org}
> | CS PhD student at IC-Unicamp oliva@{lsd.ic.unicamp.br, gnu.org}
> | Free Software Evangelist Professional serial bug killer
> |
> | ------
> | Want more information? See the CrossGCC FAQ,
>
> http://www.objsw.com/CrossGCC/
>
> | Want to unsubscribe? Send a note to
>
> crossgcc-unsubscribe@sources.redhat.com
>
> ********************************************************
> Indukumar Ilangovan
> HCL-Cisco Offshore development center,
> 49-50, Nelson Manickam Road, Chennai - 600029 , India .
> TEL: +91-44-2374 1939 x 2215 FAX: +91-44-3741038
> Email :iilangov@cisco.com
next prev parent reply other threads:[~2003-01-09 17:06 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-01-09 15:18 [OT] cross-compiler problem Indukumar Ilangovan
2003-01-09 15:18 ` Indukumar Ilangovan
2003-01-09 15:31 ` Krishnakumar. R [this message]
2003-01-09 15:31 ` Krishnakumar. R
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200301092101.12871.krishnakumar@naturesoft.net \
--to=krishnakumar@naturesoft.net \
--cc=iilangov@cisco.com \
--cc=linux-mips@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox