Linux MIPS Architecture development
 help / color / mirror / Atom feed
* RE: questions about making a script file for YAMON command
@ 2004-02-12 13:45 Ren, Manling
  2004-02-12 14:08 ` Jan-Benedict Glaw
  2004-02-12 14:20 ` Wolfgang Denk
  0 siblings, 2 replies; 5+ messages in thread
From: Ren, Manling @ 2004-02-12 13:45 UTC (permalink / raw)
  To: linux-mips

[-- Attachment #1: Type: text/plain, Size: 1029 bytes --]


 

Dear the technical support team,
 
I am running YAMON on pb1100 board in Linux.  At the YAMON prompt, I need to
change some registers by using the command "edit -32 0x########"  several
times.  I wonder if I can put all these "edit" commands into a script file
then run this file without typing any more commands?  How can I achieve this
if it is possible.  It seems that the "load" command in YAMON is only
supported srec file.  Could you give me some clues please.  Thanks a lot.
 
Regards,
Manling
 
____________________________ 
Manling Ren  :-)* ******* *****                

Welwyn OPDU Software Architecture Team 
OPDU                    
Xerox Limited Technical Centre 
DP2         
Bessemer Road               
Welwyn Garden City  AL7 1HE         
Hertfordshire               
UK                          
%    +44 (0)1707 35 2704                  
*     8 668 2704 (xerox intranet)         
*     +44 (0)1707 35 3947         
*    Manling.Ren@gbr.xerox.com  
_________________________________           


 



 


[-- Attachment #2: Type: text/html, Size: 4739 bytes --]

^ permalink raw reply	[flat|nested] 5+ messages in thread
* RE: questions about making a script file for YAMON command
@ 2004-02-12 14:40 Berg, Christian
  0 siblings, 0 replies; 5+ messages in thread
From: Berg, Christian @ 2004-02-12 14:40 UTC (permalink / raw)
  To: Ren, Manling; +Cc: linux-mips

[-- Attachment #1: Type: text/plain, Size: 1710 bytes --]

Hi Manling,
 
there is a variable called START in the YAMON environment. The contents of
which is executed at YAMON start-up. So if you can fit your 'edit' commands
in the space provided you're good to go. See page 22 of the YAMON user
manual
(http://www.mips.com/content/Documentation/MIPSDocumentation/Software/doclib
rary
<http://www.mips.com/content/Documentation/MIPSDocumentation/Software/doclib
rary> ). But this is getting off topic now...
 
Chris

-----Original Message-----
From: Ren, Manling [mailto:Manling.Ren@gbr.xerox.com] 
Sent: Thursday, February 12, 2004 2:45 PM
To: linux-mips@linux-mips.org
Subject: RE: questions about making a script file for YAMON command



 

Dear the technical support team,
 
I am running YAMON on pb1100 board in Linux.  At the YAMON prompt, I need to
change some registers by using the command "edit -32 0x########"  several
times.  I wonder if I can put all these "edit" commands into a script file
then run this file without typing any more commands?  How can I achieve this
if it is possible.  It seems that the "load" command in YAMON is only
supported srec file.  Could you give me some clues please.  Thanks a lot.
 
Regards,
Manling
 
____________________________ 
Manling Ren  :-)* ******* *****                

Welwyn OPDU Software Architecture Team 
OPDU                    
Xerox Limited Technical Centre 
DP2         
Bessemer Road               
Welwyn Garden City  AL7 1HE         
Hertfordshire               
UK                          
%    +44 (0)1707 35 2704                  
*     8 668 2704 (xerox intranet)         
*     +44 (0)1707 35 3947         
*    Manling.Ren@gbr.xerox.com  
_________________________________           


 



 


[-- Attachment #2: Type: text/html, Size: 6544 bytes --]

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2004-02-13 12:14 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-02-12 13:45 questions about making a script file for YAMON command Ren, Manling
2004-02-12 14:08 ` Jan-Benedict Glaw
2004-02-12 14:20 ` Wolfgang Denk
2004-02-12 17:21   ` Goswin von Brederlow
  -- strict thread matches above, loose matches on Subject: below --
2004-02-12 14:40 Berg, Christian

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox