From: Ulrich Eckhardt <eckhardt@satorlaser.com>
To: linux-mips@linux-mips.org
Subject: Re: [patch] some cleanups for Alchemy processors
Date: Mon, 18 Apr 2005 17:27:21 +0200 [thread overview]
Message-ID: <200504181727.22299.eckhardt@satorlaser.com> (raw)
In-Reply-To: <200504181137.49593.eckhardt@satorlaser.com>
OK, here's a new version that fixes the objections raised by Christoph and
Dan.
Uli
Changes:
* use 'unsigned long' as address supplied to au_write[bwl]()
* remove two already unused and commented structures
* added an ULL suffix to several address constants that use
bits 35-32
---
Index: include/asm-mips/mach-au1x00/au1000.h
===================================================================
RCS file: /home/cvs/linux/include/asm-mips/mach-au1x00/au1000.h,v
retrieving revision 1.16
diff -u -r1.16 au1000.h
--- include/asm-mips/mach-au1x00/au1000.h 4 Apr 2005 01:06:20 -0000 1.16
+++ include/asm-mips/mach-au1x00/au1000.h 18 Apr 2005 15:24:38 -0000
@@ -60,34 +60,34 @@
mdelay(ms);
}
-void static inline au_writeb(u8 val, int reg)
+void static inline au_writeb(u8 val, unsigned long reg)
{
*(volatile u8 *)(reg) = val;
}
-void static inline au_writew(u16 val, int reg)
+void static inline au_writew(u16 val, unsigned long reg)
{
*(volatile u16 *)(reg) = val;
}
-void static inline au_writel(u32 val, int reg)
+void static inline au_writel(u32 val, unsigned long reg)
{
*(volatile u32 *)(reg) = val;
}
-static inline u8 au_readb(unsigned long port)
+static inline u8 au_readb(unsigned long reg)
{
- return (*(volatile u8 *)port);
+ return (*(volatile u8 *)reg);
}
-static inline u16 au_readw(unsigned long port)
+static inline u16 au_readw(unsigned long reg)
{
- return (*(volatile u16 *)port);
+ return (*(volatile u16 *)reg);
}
-static inline u32 au_readl(unsigned long port)
+static inline u32 au_readl(unsigned long reg)
{
- return (*(volatile u32 *)port);
+ return (*(volatile u32 *)reg);
}
/* These next three functions should be a generic part of the MIPS
@@ -181,26 +181,6 @@
#define MEM_SDSLEEP (0x0030)
#define MEM_SDSMCKE (0x0034)
-#ifndef ASSEMBLER
-/*typedef volatile struct
-{
- uint32 sdmode0;
- uint32 sdmode1;
- uint32 sdmode2;
- uint32 sdaddr0;
- uint32 sdaddr1;
- uint32 sdaddr2;
- uint32 sdrefcfg;
- uint32 sdautoref;
- uint32 sdwrmd0;
- uint32 sdwrmd1;
- uint32 sdwrmd2;
- uint32 sdsleep;
- uint32 sdsmcke;
-
-} AU1X00_SDRAM;*/
-#endif
-
/*
* MEM_SDMODE register content definitions
*/
@@ -286,49 +266,6 @@
#define MEM_SDSREF (0x08D0)
#define MEM_SDSLEEP MEM_SDSREF
-#ifndef ASSEMBLER
-/*typedef volatile struct
-{
- uint32 sdmode0;
- uint32 reserved0;
- uint32 sdmode1;
- uint32 reserved1;
- uint32 sdmode2;
- uint32 reserved2[3];
- uint32 sdaddr0;
- uint32 reserved3;
- uint32 sdaddr1;
- uint32 reserved4;
- uint32 sdaddr2;
- uint32 reserved5[3];
- uint32 sdconfiga;
- uint32 reserved6;
- uint32 sdconfigb;
- uint32 reserved7;
- uint32 sdstat;
- uint32 reserved8;
- uint32 sderraddr;
- uint32 reserved9;
- uint32 sdstride0;
- uint32 reserved10;
- uint32 sdstride1;
- uint32 reserved11;
- uint32 sdstride2;
- uint32 reserved12[3];
- uint32 sdwrmd0;
- uint32 reserved13;
- uint32 sdwrmd1;
- uint32 reserved14;
- uint32 sdwrmd2;
- uint32 reserved15[11];
- uint32 sdprecmd;
- uint32 reserved16;
- uint32 sdautoref;
- uint32 reserved17;
- uint32 sdsref;
-
-} AU1550_SDRAM;*/
-#endif
#endif
/*
@@ -365,9 +302,9 @@
#define SSI0_PHYS_ADDR 0x11600000
#define SSI1_PHYS_ADDR 0x11680000
#define SYS_PHYS_ADDR 0x11900000
-#define PCMCIA_IO_PHYS_ADDR 0xF00000000
-#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000
-#define PCMCIA_MEM_PHYS_ADDR 0xF80000000
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
#endif
/********************************************************************/
@@ -399,13 +336,13 @@
#define UART3_PHYS_ADDR 0x11400000
#define GPIO2_PHYS_ADDR 0x11700000
#define SYS_PHYS_ADDR 0x11900000
-#define PCI_MEM_PHYS_ADDR 0x400000000
-#define PCI_IO_PHYS_ADDR 0x500000000
-#define PCI_CONFIG0_PHYS_ADDR 0x600000000
-#define PCI_CONFIG1_PHYS_ADDR 0x680000000
-#define PCMCIA_IO_PHYS_ADDR 0xF00000000
-#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000
-#define PCMCIA_MEM_PHYS_ADDR 0xF80000000
+#define PCI_MEM_PHYS_ADDR 0x400000000ULL
+#define PCI_IO_PHYS_ADDR 0x500000000ULL
+#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL
+#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
#endif
/********************************************************************/
@@ -442,9 +379,9 @@
#define GPIO2_PHYS_ADDR 0x11700000
#define SYS_PHYS_ADDR 0x11900000
#define LCD_PHYS_ADDR 0x15000000
-#define PCMCIA_IO_PHYS_ADDR 0xF00000000
-#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000
-#define PCMCIA_MEM_PHYS_ADDR 0xF80000000
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
#endif
/***********************************************************************/
@@ -473,13 +410,13 @@
#define PSC1_PHYS_ADDR 0x11B00000
#define PSC2_PHYS_ADDR 0x10A00000
#define PSC3_PHYS_ADDR 0x10B00000
-#define PCI_MEM_PHYS_ADDR 0x400000000
-#define PCI_IO_PHYS_ADDR 0x500000000
-#define PCI_CONFIG0_PHYS_ADDR 0x600000000
-#define PCI_CONFIG1_PHYS_ADDR 0x680000000
-#define PCMCIA_IO_PHYS_ADDR 0xF00000000
-#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000
-#define PCMCIA_MEM_PHYS_ADDR 0xF80000000
+#define PCI_MEM_PHYS_ADDR 0x400000000ULL
+#define PCI_IO_PHYS_ADDR 0x500000000ULL
+#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL
+#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
#endif
/***********************************************************************/
@@ -500,15 +437,15 @@
#define DDMA_PHYS_ADDR 0x14002000
#define PSC0_PHYS_ADDR 0x11A00000
#define PSC1_PHYS_ADDR 0x11B00000
-#define PCMCIA_IO_PHYS_ADDR 0xF00000000
-#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000
-#define PCMCIA_MEM_PHYS_ADDR 0xF80000000
#define SD0_PHYS_ADDR 0x10600000
#define SD1_PHYS_ADDR 0x10680000
#define LCD_PHYS_ADDR 0x15000000
#define SWCNT_PHYS_ADDR 0x1110010C
#define MAEFE_PHYS_ADDR 0x14012000
#define MAEBE_PHYS_ADDR 0x14010000
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
#endif
@@ -1788,7 +1725,7 @@
#define PCI_IO_START 0
#define PCI_IO_END 0
#define PCI_MEM_START 0
-#define PCI_MEM_END 0
+#define PCI_MEM_END 0
#define PCI_FIRST_DEVFN 0
#define PCI_LAST_DEVFN 0
next prev parent reply other threads:[~2005-04-18 15:26 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-04-18 9:37 [patch] some cleanups for Alchemy processors Ulrich Eckhardt
2005-04-18 11:54 ` Christoph Hellwig
2005-04-18 14:45 ` Dan malek
2005-04-18 15:27 ` Ulrich Eckhardt [this message]
2005-04-21 5:32 ` Pete Popov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200504181727.22299.eckhardt@satorlaser.com \
--to=eckhardt@satorlaser.com \
--cc=linux-mips@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox