The most stable version of 2.6

The most stable version of 2.6

[colin]

Hi there,
We want to run linux on our mips board.
Stability is an important issue. For so many linux kernel versions, which
one is good for us to work on?
What's the difference between 2.6.11 & 2.6.12?

Regards,
Colin

The most stable version of 2.6

[colin]

Hi there,
We want to run linux on our mips board.
Stability is an important issue. For so many linux kernel versions, which
one is good for us to work on?
What's the difference between 2.6.11 & 2.6.12?

Regards,
Colin

Re: The most stable version of 2.6

[Steven J. Hill]

It would help if you could tell us which type of processor and
board you are using.

-Steve

Re: The most stable version of 2.6

[colin]

Hi Steve,
We are using our own SOC with 4ke core.

This will be a commercial product, and it must be very stable... :-)

Regards,
Colin




----- Original Message ----- 
From: "Steven J. Hill" <sjhill@realitydiluted.com>
To: <colin@realtek.com.tw>; <linux-mips@linux-mips.org>
Sent: Tuesday, June 21, 2005 6:57 PM
Subject: Re: The most stable version of 2.6


> It would help if you could tell us which type of processor and
> board you are using.
> 
> -Steve

Re: The most stable version of 2.6

[colin]

Hi Steve,
We are using our own SOC with 4ke core.

This will be a commercial product, and it must be very stable... :-)

Regards,
Colin




----- Original Message ----- 
From: "Steven J. Hill" <sjhill@realitydiluted.com>
To: <colin@realtek.com.tw>; <linux-mips@linux-mips.org>
Sent: Tuesday, June 21, 2005 6:57 PM
Subject: Re: The most stable version of 2.6


> It would help if you could tell us which type of processor and
> board you are using.
> 
> -Steve

Re: The most stable version of 2.6

[Ladislav Michl]

On Tue, Jun 21, 2005 at 07:48:20PM +0800, colin wrote:
> 
> Hi Steve,
> We are using our own SOC with 4ke core.
> 
> This will be a commercial product, and it must be very stable... :-)

In that case you probably want to start with 2.6.12 linux-mips.org CVS.
And because you are using your own SOC noone will help you when you
experience any instability not reproducible elsewhere.

Regards,
	ladis

Re: The most stable version of 2.6

[Stanislaw Skowronek]

> In that case you probably want to start with 2.6.12 linux-mips.org CVS.
> And because you are using your own SOC noone will help you when you
> experience any instability not reproducible elsewhere.

Unless you send free samples. Yeah.

Stanislaw