Linux MIPS Architecture development
 help / color / mirror / Atom feed
* 2.6.12 DOES read MAC address
@ 2005-07-06 12:48 Arianna Arona
  2005-07-06 13:09 ` Ralf Baechle
  2005-07-06 15:22 ` Stanislaw Skowronek
  0 siblings, 2 replies; 6+ messages in thread
From: Arianna Arona @ 2005-07-06 12:48 UTC (permalink / raw)
  To: linux-mips


I've compiled the kernel myself and now it reads MAC address at boot time.
Problem solved? NO. Ethernet card does not trasmit any packets on the net.

I have a question: how is your ethernet card? Mine is a card with network, 2 
consoles and a SCSI port in it. Could be this the problem?

Cheers,
A.

-- 
Arianna Arona
Servizi Informatici
Dipartimento di Scienze dell'Informazione
Via Comelico 39
20135 Milano

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: 2.6.12 DOES read MAC address
  2005-07-06 12:48 2.6.12 DOES read MAC address Arianna Arona
@ 2005-07-06 13:09 ` Ralf Baechle
  2005-07-06 13:40   ` Thiemo Seufer
  2005-07-06 15:22 ` Stanislaw Skowronek
  1 sibling, 1 reply; 6+ messages in thread
From: Ralf Baechle @ 2005-07-06 13:09 UTC (permalink / raw)
  To: Arianna Arona; +Cc: linux-mips

On Wed, Jul 06, 2005 at 02:48:02PM +0200, Arianna Arona wrote:

> I've compiled the kernel myself and now it reads MAC address at boot time.
> Problem solved? NO. Ethernet card does not trasmit any packets on the net.
> 
> I have a question: how is your ethernet card? Mine is a card with network, 2 
> consoles and a SCSI port in it. Could be this the problem?

Same IOC3 card as every Origin.  We're looking into the issue.  Part of
the problems seems to be the hardware isn't behaving exactly the way I
thought it is meant to ...

  Ralf

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: 2.6.12 DOES read MAC address
  2005-07-06 13:09 ` Ralf Baechle
@ 2005-07-06 13:40   ` Thiemo Seufer
  0 siblings, 0 replies; 6+ messages in thread
From: Thiemo Seufer @ 2005-07-06 13:40 UTC (permalink / raw)
  To: linux-mips

Ralf Baechle wrote:
> On Wed, Jul 06, 2005 at 02:48:02PM +0200, Arianna Arona wrote:
> 
> > I've compiled the kernel myself and now it reads MAC address at boot time.
> > Problem solved? NO. Ethernet card does not trasmit any packets on the net.
> > 
> > I have a question: how is your ethernet card? Mine is a card with network, 2 
> > consoles and a SCSI port in it. Could be this the problem?
> 
> Same IOC3 card as every Origin.  We're looking into the issue.  Part of
> the problems seems to be the hardware isn't behaving exactly the way I
> thought it is meant to ...

JFTR, CVS HEAD works here, with one strangeness: The kernel fails to find
any autoconfiguration from dhcp. Specifying the parameters on the command
line works, and the interface seems to work fine once the machine is up.


Thiemo

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: 2.6.12 DOES read MAC address
  2005-07-06 12:48 2.6.12 DOES read MAC address Arianna Arona
  2005-07-06 13:09 ` Ralf Baechle
@ 2005-07-06 15:22 ` Stanislaw Skowronek
  2005-07-06 15:48   ` Ralf Baechle
  2005-07-06 15:52   ` Arianna Arona
  1 sibling, 2 replies; 6+ messages in thread
From: Stanislaw Skowronek @ 2005-07-06 15:22 UTC (permalink / raw)
  To: Arianna Arona; +Cc: linux-mips

> I have a question: how is your ethernet card? Mine is a card with network, 2 
> consoles and a SCSI port in it. Could be this the problem?

Are you sure about the SCSI port? Can you give me the SGI part#
(030-xxxx-xxx)? It should be stamped on the board. If it's 030-1155-xxx,
it's a CADduo and verified working.

Stanislaw

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: 2.6.12 DOES read MAC address
  2005-07-06 15:22 ` Stanislaw Skowronek
@ 2005-07-06 15:48   ` Ralf Baechle
  2005-07-06 15:52   ` Arianna Arona
  1 sibling, 0 replies; 6+ messages in thread
From: Ralf Baechle @ 2005-07-06 15:48 UTC (permalink / raw)
  To: Stanislaw Skowronek; +Cc: Arianna Arona, linux-mips

On Wed, Jul 06, 2005 at 05:22:35PM +0200, Stanislaw Skowronek wrote:

> > I have a question: how is your ethernet card? Mine is a card with network, 2 
> > consoles and a SCSI port in it. Could be this the problem?
> 
> Are you sure about the SCSI port? Can you give me the SGI part#
> (030-xxxx-xxx)? It should be stamped on the board. If it's 030-1155-xxx,
> it's a CADduo and verified working.

It's eth0, so the onboard card.

  Ralf

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: 2.6.12 DOES read MAC address
  2005-07-06 15:22 ` Stanislaw Skowronek
  2005-07-06 15:48   ` Ralf Baechle
@ 2005-07-06 15:52   ` Arianna Arona
  1 sibling, 0 replies; 6+ messages in thread
From: Arianna Arona @ 2005-07-06 15:52 UTC (permalink / raw)
  To: Stanislaw Skowronek; +Cc: linux-mips

On Wednesday 06 July 2005 17:22, Stanislaw Skowronek wrote:

> Are you sure about the SCSI port? Can you give me the SGI part#
> (030-xxxx-xxx)? It should be stamped on the board. If it's 030-1155-xxx,
> it's a CADduo and verified working.

there is a label "040-1388-002 REV. A BERMO USA 9912"

A.

-- 
Arianna Arona
Servizi Informatici
Dipartimento di Scienze dell'Informazione
Via Comelico 39
20135 Milano

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2005-07-06 15:51 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-07-06 12:48 2.6.12 DOES read MAC address Arianna Arona
2005-07-06 13:09 ` Ralf Baechle
2005-07-06 13:40   ` Thiemo Seufer
2005-07-06 15:22 ` Stanislaw Skowronek
2005-07-06 15:48   ` Ralf Baechle
2005-07-06 15:52   ` Arianna Arona

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox