* advice on JTAG @ 2005-12-12 20:40 Rodolfo Giometti 2005-12-12 20:48 ` Wolfgang Denk 0 siblings, 1 reply; 3+ messages in thread From: Rodolfo Giometti @ 2005-12-12 20:40 UTC (permalink / raw) To: linux-mips Hello, I'm looking for a good JTAG system to debug a MIPS AU1100 based board. I'd like to have the possibility to put hardware and software break points in u-boot and linux source code. Also I prefere a system who completely supports the GNU/Linux system as host. Can you please suggest me some links? :) Thanks in advance, Rodolfo -- GNU/Linux Solutions e-mail: giometti@enneenne.com Linux Device Driver giometti@gnudd.com Embedded Systems giometti@linux.it UNIX programming phone: +39 349 2432127 ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: advice on JTAG 2005-12-12 20:40 advice on JTAG Rodolfo Giometti @ 2005-12-12 20:48 ` Wolfgang Denk 2005-12-12 21:18 ` Ed Okerson 0 siblings, 1 reply; 3+ messages in thread From: Wolfgang Denk @ 2005-12-12 20:48 UTC (permalink / raw) To: Rodolfo Giometti; +Cc: linux-mips In message <20051212204035.GL5132@hulk.enneenne.com> you wrote: > > I'm looking for a good JTAG system to debug a MIPS AU1100 based > board. Abatron BDI2000... > I'd like to have the possibility to put hardware and software break > points in u-boot and linux source code. Also I prefere a system who > completely supports the GNU/Linux system as host. ...with firmware "bdiGDB". > Can you please suggest me some links? :) http://www.abatron.ch/products/xr/aspx/r.1/Sv.63713d7b43526570313d7b693d394f54565743484b33513244474b394a594556537d7d/rx/products_detail.htm Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de Faith may be defined briefly as an illogical belief in the occurence of the improbable. - H. L. Mencken ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: advice on JTAG 2005-12-12 20:48 ` Wolfgang Denk @ 2005-12-12 21:18 ` Ed Okerson 0 siblings, 0 replies; 3+ messages in thread From: Ed Okerson @ 2005-12-12 21:18 UTC (permalink / raw) To: linux-mips I'll second that. I own at least 6 different JTAG adapters for different processors, and the BDI2000 is the best hands down. Ed Okerson > In message <20051212204035.GL5132@hulk.enneenne.com> you wrote: >> >> I'm looking for a good JTAG system to debug a MIPS AU1100 based >> board. > > Abatron BDI2000... > >> I'd like to have the possibility to put hardware and software break >> points in u-boot and linux source code. Also I prefere a system who >> completely supports the GNU/Linux system as host. > > ...with firmware "bdiGDB". > >> Can you please suggest me some links? :) > > http://www.abatron.ch/products/xr/aspx/r.1/Sv.63713d7b43526570313d7b693d394f54565743484b33513244474b394a594556537d7d/rx/products_detail.htm > > Best regards, > > Wolfgang Denk > > -- > Software Engineering: Embedded and Realtime Systems, Embedded Linux > Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de > Faith may be defined briefly as an illogical belief in the occurence > of the improbable. - H. L. Mencken > ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2005-12-12 21:12 UTC | newest] Thread overview: 3+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2005-12-12 20:40 advice on JTAG Rodolfo Giometti 2005-12-12 20:48 ` Wolfgang Denk 2005-12-12 21:18 ` Ed Okerson
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox