* Perfomance problem on MIPS
@ 2006-06-05 7:43 art
2006-06-05 7:49 ` art
2006-06-05 9:23 ` Ralf Baechle
0 siblings, 2 replies; 4+ messages in thread
From: art @ 2006-06-05 7:43 UTC (permalink / raw)
To: linux-mips
Hello all!
I work with processor: MIPS 4KC.
I check network performance without iptables & conntrac enabled
and it has near 80Mbit/s.
When I enable (without adding rules) network performance was
near 40Mbit/s.
While testing ksoftirqd is get near 50% of cpu. And (it is so
strange) top eats the same! However cpu has 100% load and
perfomance is real bad.
Has anybody same problem?
--
Best regards,
art mailto:art@sigrand.ru
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Perfomance problem on MIPS
2006-06-05 7:43 Perfomance problem on MIPS art
@ 2006-06-05 7:49 ` art
2006-06-05 7:51 ` art
2006-06-05 9:23 ` Ralf Baechle
1 sibling, 1 reply; 4+ messages in thread
From: art @ 2006-06-05 7:49 UTC (permalink / raw)
To: linux-mips
Hello art,
Monday, June 05, 2006, 2:43:47 PM, you wrote:
a> Hello all!
a> I work with processor: MIPS 4KC.
a> I check network performance without iptables & conntrac enabled
a> and it has near 80Mbit/s.
a> When I enable (without adding rules) network performance was
a> near 40Mbit/s.
a> While testing ksoftirqd is get near 50% of cpu. And (it is so
a> strange) top eats the same! However cpu has 100% load and
a> perfomance is real bad.
a> Has anybody same problem?
I mistype: with iptables&conntrack perfomance only 30Mbit/s
--
Best regards,
art mailto:art@sigrand.ru
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Perfomance problem on MIPS
2006-06-05 7:49 ` art
@ 2006-06-05 7:51 ` art
0 siblings, 0 replies; 4+ messages in thread
From: art @ 2006-06-05 7:51 UTC (permalink / raw)
To: linux-mips
Kernel 2.6.16 from linux-mips.org
a>> Hello all!
a>> I work with processor: MIPS 4KC.
a>> I check network performance without iptables & conntrac enabled
a>> and it has near 80Mbit/s.
a>> When I enable (without adding rules) network performance was
a>> near 40Mbit/s.
a>> While testing ksoftirqd is get near 50% of cpu. And (it is so
a>> strange) top eats the same! However cpu has 100% load and
a>> perfomance is real bad.
a>> Has anybody same problem?
--
Best regards,
art mailto:art@sigrand.ru
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Perfomance problem on MIPS
2006-06-05 7:43 Perfomance problem on MIPS art
2006-06-05 7:49 ` art
@ 2006-06-05 9:23 ` Ralf Baechle
1 sibling, 0 replies; 4+ messages in thread
From: Ralf Baechle @ 2006-06-05 9:23 UTC (permalink / raw)
To: art; +Cc: linux-mips
On Mon, Jun 05, 2006 at 02:43:47PM +0700, art wrote:
> Hello all!
> I work with processor: MIPS 4KC.
> I check network performance without iptables & conntrac enabled
> and it has near 80Mbit/s.
> When I enable (without adding rules) network performance was
> near 40Mbit/s.
> While testing ksoftirqd is get near 50% of cpu. And (it is so
> strange) top eats the same! However cpu has 100% load and
> perfomance is real bad.
> Has anybody same problem?
Just loading the connection tracking module will pull networking
performance into a deep hole, no surprise there. All your numbers are on
the low side though. What clock rate is your CPU running?
Ralf
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2006-06-05 9:23 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-06-05 7:43 Perfomance problem on MIPS art
2006-06-05 7:49 ` art
2006-06-05 7:51 ` art
2006-06-05 9:23 ` Ralf Baechle
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox