From: Antonio SJ Musumeci <bile@landofbile.com>
To: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Subject: Re: patch: include/asm-mips/system.h __cmpxchg64 bugfix and cleanup
Date: Wed, 18 Oct 2006 14:08:18 -0400 [thread overview]
Message-ID: <20061018140818.3e40b0a4@amiga> (raw)
In-Reply-To: <20061015184226.GA3259@linux-mips.org>
I'm not talking about that. This patch explains it. Moving
the conditional compilation from the optimizer to the preprocessor.
I see no reason to be using hard coded 1's and 0's in runtime logic.
And one could go all the way and check cpu_has_llsc to see if it's
hardcoded or not.
Signed-off-by: Antonio SJ Musumeci <bile@landofbile.com>
--- clean.linux.mips.git/include/asm-mips/system.h 2006-10-15 17:58:08.000000000 -0400
+++ linux.mips.git/include/asm-mips/system.h 2006-10-14 18:21:16.000000000 -0400
@@ -206,9 +206,9 @@ static inline unsigned long __xchg_u32(v
{
__u32 retval;
- if (cpu_has_llsc && R10000_LLSC_WAR) {
+ if (cpu_has_llsc) {
unsigned long dummy;
-
+#if R10000_LLSC_WAR
__asm__ __volatile__(
" .set mips3 \n"
"1: ll %0, %3 # xchg_u32 \n"
@@ -217,16 +217,14 @@ static inline unsigned long __xchg_u32(v
" .set mips3 \n"
" sc %2, %1 \n"
" beqzl %2, 1b \n"
-#ifdef CONFIG_SMP
+# ifdef CONFIG_SMP
" sync \n"
-#endif
+# endif
" .set mips0 \n"
: "=&r" (retval), "=m" (*m), "=&r" (dummy)
: "R" (*m), "Jr" (val)
: "memory");
- } else if (cpu_has_llsc) {
- unsigned long dummy;
-
+#else /* !R10000_LLSC_WAR */
__asm__ __volatile__(
" .set mips3 \n"
"1: ll %0, %3 # xchg_u32 \n"
@@ -235,9 +233,9 @@ static inline unsigned long __xchg_u32(v
" .set mips3 \n"
" sc %2, %1 \n"
" beqz %2, 2f \n"
-#ifdef CONFIG_SMP
+# ifdef CONFIG_SMP
" sync \n"
-#endif
+# endif
" .subsection 2 \n"
"2: b 1b \n"
" .previous \n"
@@ -245,8 +243,9 @@ static inline unsigned long __xchg_u32(v
: "=&r" (retval), "=m" (*m), "=&r" (dummy)
: "R" (*m), "Jr" (val)
: "memory");
+#endif /* R10000_LLSC_WAR */
} else {
- unsigned long flags;
+ unsigned long flags;
local_irq_save(flags);
retval = *m;
@@ -262,34 +261,32 @@ static inline __u64 __xchg_u64(volatile
{
__u64 retval;
- if (cpu_has_llsc && R10000_LLSC_WAR) {
+ if (cpu_has_llsc) {
unsigned long dummy;
-
+#if R10000_LLSC_WAR
__asm__ __volatile__(
" .set mips3 \n"
"1: lld %0, %3 # xchg_u64 \n"
" move %2, %z4 \n"
" scd %2, %1 \n"
" beqzl %2, 1b \n"
-#ifdef CONFIG_SMP
+# ifdef CONFIG_SMP
" sync \n"
-#endif
+# endif
" .set mips0 \n"
: "=&r" (retval), "=m" (*m), "=&r" (dummy)
: "R" (*m), "Jr" (val)
: "memory");
- } else if (cpu_has_llsc) {
- unsigned long dummy;
-
- __asm__ __volatile__(
+#else /* !R10000_LLSC_WAR */
+ __asm__ __volatile__(
" .set mips3 \n"
"1: lld %0, %3 # xchg_u64 \n"
" move %2, %z4 \n"
" scd %2, %1 \n"
" beqz %2, 2f \n"
-#ifdef CONFIG_SMP
+# ifdef CONFIG_SMP
" sync \n"
-#endif
+# endif
" .subsection 2 \n"
"2: b 1b \n"
" .previous \n"
@@ -297,6 +294,8 @@ static inline __u64 __xchg_u64(volatile
: "=&r" (retval), "=m" (*m), "=&r" (dummy)
: "R" (*m), "Jr" (val)
: "memory");
+
+#endif /* R10000_LLSC_WAR */
} else {
unsigned long flags;
@@ -339,7 +338,8 @@ static inline unsigned long __cmpxchg_u3
{
__u32 retval;
- if (cpu_has_llsc && R10000_LLSC_WAR) {
+ if (cpu_has_llsc) {
+#if R10000_LLSC_WAR
__asm__ __volatile__(
" .set push \n"
" .set noat \n"
@@ -351,15 +351,15 @@ static inline unsigned long __cmpxchg_u3
" .set mips3 \n"
" sc $1, %1 \n"
" beqzl $1, 1b \n"
-#ifdef CONFIG_SMP
+# ifdef CONFIG_SMP
" sync \n"
-#endif
+# endif
"2: \n"
" .set pop \n"
: "=&r" (retval), "=R" (*m)
: "R" (*m), "Jr" (old), "Jr" (new)
: "memory");
- } else if (cpu_has_llsc) {
+#else /* !R10000_LLSC_WAR */
__asm__ __volatile__(
" .set push \n"
" .set noat \n"
@@ -371,9 +371,9 @@ static inline unsigned long __cmpxchg_u3
" .set mips3 \n"
" sc $1, %1 \n"
" beqz $1, 3f \n"
-#ifdef CONFIG_SMP
+# ifdef CONFIG_SMP
" sync \n"
-#endif
+# endif
"2: \n"
" .subsection 2 \n"
"3: b 1b \n"
@@ -382,6 +382,7 @@ static inline unsigned long __cmpxchg_u3
: "=&r" (retval), "=R" (*m)
: "R" (*m), "Jr" (old), "Jr" (new)
: "memory");
+#endif /* R10000_LLSC_WAR */
} else {
unsigned long flags;
@@ -401,8 +402,9 @@ static inline unsigned long __cmpxchg_u6
{
__u64 retval;
- if (cpu_has_llsc && R10000_LLSC_WAR) {
- __asm__ __volatile__(
+ if (cpu_has_llsc) {
+#if R10000_LLSC_WAR
+ __asm__ __volatile__(
" .set push \n"
" .set noat \n"
" .set mips3 \n"
@@ -411,15 +413,15 @@ static inline unsigned long __cmpxchg_u6
" move $1, %z4 \n"
" scd $1, %1 \n"
" beqzl $1, 1b \n"
-#ifdef CONFIG_SMP
+# ifdef CONFIG_SMP
" sync \n"
-#endif
+# endif
"2: \n"
" .set pop \n"
: "=&r" (retval), "=R" (*m)
: "R" (*m), "Jr" (old), "Jr" (new)
: "memory");
- } else if (cpu_has_llsc) {
+#else /* !R10000_LLSC_WAR */
__asm__ __volatile__(
" .set push \n"
" .set noat \n"
@@ -429,9 +431,9 @@ static inline unsigned long __cmpxchg_u6
" move $1, %z4 \n"
" scd $1, %1 \n"
" beqz $1, 3f \n"
-#ifdef CONFIG_SMP
+# ifdef CONFIG_SMP
" sync \n"
-#endif
+# endif
"2: \n"
" .subsection 2 \n"
"3: b 1b \n"
@@ -440,6 +442,7 @@ static inline unsigned long __cmpxchg_u6
: "=&r" (retval), "=R" (*m)
: "R" (*m), "Jr" (old), "Jr" (new)
: "memory");
+#endif /* R10000_LLSC_WAR */
} else {
unsigned long flags;
On Sun, 15 Oct 2006 19:42:26 +0100
Ralf Baechle <ralf@linux-mips.org> wrote:
> On Fri, Oct 13, 2006 at 03:18:41PM -0400, Antonio SJ Musumeci wrote:
>
> > Wouldn't it be better to check the macro in the preprocessor
> > instead of runtime? And why are those defined to 0 instead of
> > explicitly undef'ed? I've found one bug because it was assumed to
> > be undefined instead of 0. If no one objects I'll post a patch
> > undefing those and fix any bugs I've found because of them.
>
> Any reasonable system configuration will define cpu_has_llsc to 1 in
> order to override the default. R10000_LLSC_WAR is a constant as well.
> So only one of the three if blocks will remain. If that's not the
> case you either don't have a cpu-feature-overrides.h file for your
> platform or it doesn't define cpu_has_llsc to a constant expression.
>
> Ralf
>
>
next prev parent reply other threads:[~2006-10-18 18:06 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-10-12 18:03 patch: include/asm-mips/system.h __cmpxchg64 bugfix and cleanup bile
2006-10-13 10:42 ` Ralf Baechle
2006-10-13 13:53 ` Antonio SJ Musumeci
2006-10-13 14:11 ` Ralf Baechle
2006-10-13 19:18 ` Antonio SJ Musumeci
2006-10-15 18:42 ` Ralf Baechle
2006-10-18 18:08 ` Antonio SJ Musumeci [this message]
2006-10-18 18:41 ` Thiemo Seufer
2006-10-18 19:45 ` Antonio SJ Musumeci
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20061018140818.3e40b0a4@amiga \
--to=bile@landofbile.com \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox