* sanblaze driver -> LSFC929 FiberChannel
@ 2006-10-26 20:39 Azer, William
2006-10-26 20:39 ` Azer, William
2006-10-26 23:06 ` Ralf Baechle
0 siblings, 2 replies; 7+ messages in thread
From: Azer, William @ 2006-10-26 20:39 UTC (permalink / raw)
To: linux-mips
[-- Attachment #1: Type: text/plain, Size: 1928 bytes --]
Hi All,
i am using the sanblaze card configured in the kernel for the
fiberchannel. i enabled the mpt fusion fc and the ioctl driver, i also
enable scsi disk support, ...
I get an error and it hangs.
Has any one used the sanblaze fc driver in the kernel (I am using kernel
version 2.6.17.7)
Thx,
Bill Azer
i tried loading the drivers and get this error :
bash-2.05b# insmod drivers/message/fusion/mptbase.ko
Fusion MPT base driver 3.03.09
Copyright (c) 1999-2005 LSI Logic Corporation
bash-2.05b# insmod drivers/message/fusion/mptctl.ko
Fusion MPT misc device (ioctl) driver 3.03.09
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
bash-2.05b# insmod drivers/message/fusion/mptscsih.ko
bash-2.05b# insmod drivers/scsi/scsi_transport_fc.ko
bash-2.05b# insmod
/lib/modules/2.6.17.7/kernel/drivers/message/fusion/mptfc.ko
Fusion MPT FC Host driver 3.03.09
mptbase: Initiating ioc0 bringup
ioc0: FC929: Capabilities={Initiator,Target,LAN}
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)!
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)!
mptbase: Initiating ioc0 recovery
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (130)!
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (65)!
mptbase: Initiating ioc0 recovery
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)!
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (65)!
mptbase: Initiating ioc0 recovery
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)!
scsi0 : ioc0: LSIFC929, FwRev=02000a00h, Ports=1, MaxQ=1023, IRQ=10
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (65)!
mptbase: Initiating ioc0 recovery
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)!
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (65)!
[-- Attachment #2: Type: text/html, Size: 11251 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* sanblaze driver -> LSFC929 FiberChannel
2006-10-26 20:39 sanblaze driver -> LSFC929 FiberChannel Azer, William
@ 2006-10-26 20:39 ` Azer, William
2006-10-26 23:06 ` Ralf Baechle
1 sibling, 0 replies; 7+ messages in thread
From: Azer, William @ 2006-10-26 20:39 UTC (permalink / raw)
To: linux-mips
[-- Attachment #1: Type: text/plain, Size: 1928 bytes --]
Hi All,
i am using the sanblaze card configured in the kernel for the
fiberchannel. i enabled the mpt fusion fc and the ioctl driver, i also
enable scsi disk support, ...
I get an error and it hangs.
Has any one used the sanblaze fc driver in the kernel (I am using kernel
version 2.6.17.7)
Thx,
Bill Azer
i tried loading the drivers and get this error :
bash-2.05b# insmod drivers/message/fusion/mptbase.ko
Fusion MPT base driver 3.03.09
Copyright (c) 1999-2005 LSI Logic Corporation
bash-2.05b# insmod drivers/message/fusion/mptctl.ko
Fusion MPT misc device (ioctl) driver 3.03.09
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
bash-2.05b# insmod drivers/message/fusion/mptscsih.ko
bash-2.05b# insmod drivers/scsi/scsi_transport_fc.ko
bash-2.05b# insmod
/lib/modules/2.6.17.7/kernel/drivers/message/fusion/mptfc.ko
Fusion MPT FC Host driver 3.03.09
mptbase: Initiating ioc0 bringup
ioc0: FC929: Capabilities={Initiator,Target,LAN}
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)!
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)!
mptbase: Initiating ioc0 recovery
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (130)!
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (65)!
mptbase: Initiating ioc0 recovery
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)!
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (65)!
mptbase: Initiating ioc0 recovery
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)!
scsi0 : ioc0: LSIFC929, FwRev=02000a00h, Ports=1, MaxQ=1023, IRQ=10
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (65)!
mptbase: Initiating ioc0 recovery
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)!
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (65)!
[-- Attachment #2: Type: text/html, Size: 11251 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: sanblaze driver -> LSFC929 FiberChannel
2006-10-26 20:39 sanblaze driver -> LSFC929 FiberChannel Azer, William
2006-10-26 20:39 ` Azer, William
@ 2006-10-26 23:06 ` Ralf Baechle
1 sibling, 0 replies; 7+ messages in thread
From: Ralf Baechle @ 2006-10-26 23:06 UTC (permalink / raw)
To: Azer, William; +Cc: linux-mips
On Thu, Oct 26, 2006 at 04:39:42PM -0400, Azer, William wrote:
> i am using the sanblaze card configured in the kernel for the
> fiberchannel. i enabled the mpt fusion fc and the ioctl driver, i also
> enable scsi disk support, ...
This is the first user report for such a device on MIPS ever afaics.
A few more details on your system, messages etc. could be useful to
solve your issue.
Ralf
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: sanblaze driver -> LSFC929 FiberChannel
@ 2006-10-27 18:07 Azer, William
2006-10-27 18:07 ` Azer, William
2006-10-27 19:22 ` Azer, William
0 siblings, 2 replies; 7+ messages in thread
From: Azer, William @ 2006-10-27 18:07 UTC (permalink / raw)
To: ralf; +Cc: linux-mips
[-- Attachment #1: Type: text/plain, Size: 735 bytes --]
It is a bcm1480, using linux 2.6.17.7 with sanblaze PMC
Bill
-----Original Message-----
From: Ralf Baechle <ralf@linux-mips.org>
To: Azer, William <Bill.Azer@drs-ss.com>
CC: linux-mips@linux-mips.org <linux-mips@linux-mips.org>
Sent: Thu Oct 26 19:06:09 2006
Subject: Re: sanblaze driver -> LSFC929 FiberChannel
On Thu, Oct 26, 2006 at 04:39:42PM -0400, Azer, William wrote:
> i am using the sanblaze card configured in the kernel for the
> fiberchannel. i enabled the mpt fusion fc and the ioctl driver, i also
> enable scsi disk support, ...
This is the first user report for such a device on MIPS ever afaics.
A few more details on your system, messages etc. could be useful to
solve your issue.
Ralf
[-- Attachment #2: Type: text/html, Size: 1247 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: sanblaze driver -> LSFC929 FiberChannel
2006-10-27 18:07 Azer, William
@ 2006-10-27 18:07 ` Azer, William
2006-10-27 19:22 ` Azer, William
1 sibling, 0 replies; 7+ messages in thread
From: Azer, William @ 2006-10-27 18:07 UTC (permalink / raw)
To: ralf; +Cc: linux-mips
[-- Attachment #1: Type: text/plain, Size: 735 bytes --]
It is a bcm1480, using linux 2.6.17.7 with sanblaze PMC
Bill
-----Original Message-----
From: Ralf Baechle <ralf@linux-mips.org>
To: Azer, William <Bill.Azer@drs-ss.com>
CC: linux-mips@linux-mips.org <linux-mips@linux-mips.org>
Sent: Thu Oct 26 19:06:09 2006
Subject: Re: sanblaze driver -> LSFC929 FiberChannel
On Thu, Oct 26, 2006 at 04:39:42PM -0400, Azer, William wrote:
> i am using the sanblaze card configured in the kernel for the
> fiberchannel. i enabled the mpt fusion fc and the ioctl driver, i also
> enable scsi disk support, ...
This is the first user report for such a device on MIPS ever afaics.
A few more details on your system, messages etc. could be useful to
solve your issue.
Ralf
[-- Attachment #2: Type: text/html, Size: 1247 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* RE: sanblaze driver -> LSFC929 FiberChannel
2006-10-27 18:07 Azer, William
2006-10-27 18:07 ` Azer, William
@ 2006-10-27 19:22 ` Azer, William
2006-10-27 19:22 ` Azer, William
1 sibling, 1 reply; 7+ messages in thread
From: Azer, William @ 2006-10-27 19:22 UTC (permalink / raw)
To: Azer, William, ralf; +Cc: linux-mips
[-- Attachment #1: Type: text/plain, Size: 2520 bytes --]
this is the order of the laod and the messages :
bash-2.05b# insmod drivers/message/fusion/mptbase.ko
Fusion MPT base driver 3.03.09
Copyright (c) 1999-2005 LSI Logic Corporation
bash-2.05b# insmod drivers/message/fusion/mptctl.ko
Fusion MPT misc device (ioctl) driver 3.03.09
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
bash-2.05b# insmod drivers/message/fusion/mptscsih.ko
bash-2.05b# insmod drivers/scsi/scsi_transport_fc.ko
bash-2.05b# insmod
/lib/modules/2.6.17.7/kernel/drivers/message/fusion/mptfc.ko
Fusion MPT FC Host driver 3.03.09
mptbase: Initiating ioc0 bringup
ioc0: FC929: Capabilities={Initiator,Target,LAN}
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)!
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)!
mptbase: Initiating ioc0 recovery
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (130)!
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (65)!
mptbase: Initiating ioc0 recovery
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)!
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (65)!
mptbase: Initiating ioc0 recovery
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)!
scsi0 : ioc0: LSIFC929, FwRev=02000a00h, Ports=1, MaxQ=1023, IRQ=10
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (65)!
mptbase: Initiating ioc0 recovery
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)!
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (65)!
-----Original Message-----
From: linux-mips-bounce@linux-mips.org on behalf of Azer, William
Sent: Fri 10/27/2006 2:07 PM
To: ralf@linux-mips.org
Cc: linux-mips@linux-mips.org
Subject: Re: sanblaze driver -> LSFC929 FiberChannel
It is a bcm1480, using linux 2.6.17.7 with sanblaze PMC
Bill
-----Original Message-----
From: Ralf Baechle <ralf@linux-mips.org>
To: Azer, William <Bill.Azer@drs-ss.com>
CC: linux-mips@linux-mips.org <linux-mips@linux-mips.org>
Sent: Thu Oct 26 19:06:09 2006
Subject: Re: sanblaze driver -> LSFC929 FiberChannel
On Thu, Oct 26, 2006 at 04:39:42PM -0400, Azer, William wrote:
> i am using the sanblaze card configured in the kernel for the
> fiberchannel. i enabled the mpt fusion fc and the ioctl driver, i also
> enable scsi disk support, ...
This is the first user report for such a device on MIPS ever afaics.
A few more details on your system, messages etc. could be useful to
solve your issue.
Ralf
[-- Attachment #2: Type: text/html, Size: 3338 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* RE: sanblaze driver -> LSFC929 FiberChannel
2006-10-27 19:22 ` Azer, William
@ 2006-10-27 19:22 ` Azer, William
0 siblings, 0 replies; 7+ messages in thread
From: Azer, William @ 2006-10-27 19:22 UTC (permalink / raw)
To: Azer, William, ralf; +Cc: linux-mips
[-- Attachment #1: Type: text/plain, Size: 2520 bytes --]
this is the order of the laod and the messages :
bash-2.05b# insmod drivers/message/fusion/mptbase.ko
Fusion MPT base driver 3.03.09
Copyright (c) 1999-2005 LSI Logic Corporation
bash-2.05b# insmod drivers/message/fusion/mptctl.ko
Fusion MPT misc device (ioctl) driver 3.03.09
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
bash-2.05b# insmod drivers/message/fusion/mptscsih.ko
bash-2.05b# insmod drivers/scsi/scsi_transport_fc.ko
bash-2.05b# insmod
/lib/modules/2.6.17.7/kernel/drivers/message/fusion/mptfc.ko
Fusion MPT FC Host driver 3.03.09
mptbase: Initiating ioc0 bringup
ioc0: FC929: Capabilities={Initiator,Target,LAN}
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)!
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)!
mptbase: Initiating ioc0 recovery
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (130)!
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (65)!
mptbase: Initiating ioc0 recovery
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)!
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (65)!
mptbase: Initiating ioc0 recovery
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)!
scsi0 : ioc0: LSIFC929, FwRev=02000a00h, Ports=1, MaxQ=1023, IRQ=10
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (65)!
mptbase: Initiating ioc0 recovery
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)!
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (65)!
-----Original Message-----
From: linux-mips-bounce@linux-mips.org on behalf of Azer, William
Sent: Fri 10/27/2006 2:07 PM
To: ralf@linux-mips.org
Cc: linux-mips@linux-mips.org
Subject: Re: sanblaze driver -> LSFC929 FiberChannel
It is a bcm1480, using linux 2.6.17.7 with sanblaze PMC
Bill
-----Original Message-----
From: Ralf Baechle <ralf@linux-mips.org>
To: Azer, William <Bill.Azer@drs-ss.com>
CC: linux-mips@linux-mips.org <linux-mips@linux-mips.org>
Sent: Thu Oct 26 19:06:09 2006
Subject: Re: sanblaze driver -> LSFC929 FiberChannel
On Thu, Oct 26, 2006 at 04:39:42PM -0400, Azer, William wrote:
> i am using the sanblaze card configured in the kernel for the
> fiberchannel. i enabled the mpt fusion fc and the ioctl driver, i also
> enable scsi disk support, ...
This is the first user report for such a device on MIPS ever afaics.
A few more details on your system, messages etc. could be useful to
solve your issue.
Ralf
[-- Attachment #2: Type: text/html, Size: 3338 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2006-10-27 19:22 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-10-26 20:39 sanblaze driver -> LSFC929 FiberChannel Azer, William
2006-10-26 20:39 ` Azer, William
2006-10-26 23:06 ` Ralf Baechle
-- strict thread matches above, loose matches on Subject: below --
2006-10-27 18:07 Azer, William
2006-10-27 18:07 ` Azer, William
2006-10-27 19:22 ` Azer, William
2006-10-27 19:22 ` Azer, William
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox