From: Ralf Baechle <ralf@linux-mips.org>
To: linux-mips@linux-mips.org, "Robert P. J. Day" <rpjday@mindspring.com>
Subject: dead(?) MIPS config stuff
Date: Thu, 5 Jul 2007 15:46:41 +0100 [thread overview]
Message-ID: <20070705144641.GA20210@linux-mips.org> (raw)
----- Forwarded message from "Robert P. J. Day" <rpjday@mindspring.com> -----
From: "Robert P. J. Day" <rpjday@mindspring.com>
Date: Thu, 5 Jul 2007 06:38:14 -0400 (EDT)
To: Ralf Baechle <ralf@linux-mips.org>
Subject: dead(?) MIPS config stuff
Content-Type: TEXT/PLAIN; charset=US-ASCII
a brute force run of my latest dead CONFIG variable script, you can
decide if any of it is of interest.
========== AU1000_SRC_CLK ==========
arch/mips/au1000/common/time.c:206:#ifdef CONFIG_AU1000_SRC_CLK
arch/mips/au1000/common/time.c:207:#define AU1000_SRC_CLK CONFIG_AU1000_SRC_CLK
arch/mips/au1000/common/time.c:207:#define AU1000_SRC_CLK CONFIG_AU1000_SRC_CLK
arch/mips/au1000/common/time.c:209:#define AU1000_SRC_CLK 12000000
arch/mips/au1000/common/time.c:275: AU1000_SRC_CLK;
arch/mips/au1000/common/time.c:283: cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * AU1000_SRC_CLK;
========== AU1000_USE32K ==========
arch/mips/au1000/common/time.c:250:#if defined(CONFIG_AU1000_USE32K)
========== AU1XXX_PSC_SPI ==========
arch/mips/au1000/pb1200/board_setup.c:134:#if defined(CONFIG_AU1XXX_PSC_SPI) && defined(CONFIG_I2C_AU1550)
arch/mips/au1000/pb1200/board_setup.c:137:#elif defined( CONFIG_AU1XXX_PSC_SPI )
========== CPU_R4000 ==========
arch/mips/kernel/Makefile:20:obj-$(CONFIG_CPU_R4000) += r4k_fpu.o r4k_switch.o
arch/mips/kernel/cpu-bugs64.c:159:#ifndef CONFIG_CPU_R4000
arch/mips/kernel/cpu-bugs64.c:237:#if !defined(CONFIG_CPU_R4000) && !defined(CONFIG_CPU_R4400)
arch/mips/kernel/cpu-bugs64.c:307:#if !defined(CONFIG_CPU_R4000) && !defined(CONFIG_CPU_R4400)
========== CPU_R4400 ==========
arch/mips/kernel/cpu-bugs64.c:237:#if !defined(CONFIG_CPU_R4000) && !defined(CONFIG_CPU_R4400)
arch/mips/kernel/cpu-bugs64.c:307:#if !defined(CONFIG_CPU_R4000) && !defined(CONFIG_CPU_R4400)
========== CPU_SR71000 ==========
arch/mips/momentum/ocelot_c/prom.c:36:#ifdef CONFIG_CPU_SR71000
arch/mips/momentum/ocelot_c/setup.c:215:#ifdef CONFIG_CPU_SR71000
arch/mips/momentum/ocelot_c/setup.c:271:#ifdef CONFIG_CPU_SR71000
arch/mips/kernel/cpu-probe.c:702: c->cputype = CPU_SR71000;
arch/mips/kernel/proc.c:85: [CPU_SR71000] = "Sandcraft SR71000",
include/asm-mips/cpu.h:191:#define CPU_SR71000 53
========== EXCITE_FCAP_GPI ==========
arch/mips/basler/excite/excite_device.c:164:#if defined(CONFIG_EXCITE_FCAP_GPI) || defined(CONFIG_EXCITE_FCAP_GPI_MODULE)
arch/mips/basler/excite/excite_device.c:227:#endif /* defined(CONFIG_EXCITE_FCAP_GPI) || defined(CONFIG_EXCITE_FCAP_GPI_MODULE) */
arch/mips/basler/excite/excite_device.c:164:#if defined(CONFIG_EXCITE_FCAP_GPI) || defined(CONFIG_EXCITE_FCAP_GPI_MODULE)
arch/mips/basler/excite/excite_device.c:227:#endif /* defined(CONFIG_EXCITE_FCAP_GPI) || defined(CONFIG_EXCITE_FCAP_GPI_MODULE) */
========== FB_XPERT98 ==========
arch/mips/au1000/common/setup.c:109:#ifdef CONFIG_FB_XPERT98
========== HT_LEVEL_TRIGGER ==========
arch/mips/pmc-sierra/yosemite/irq.c:77:#ifdef CONFIG_HT_LEVEL_TRIGGER
arch/mips/pmc-sierra/yosemite/irq.c:106:#endif /* CONFIG_HT_LEVEL_TRIGGER */
========== MIPS_HYDROGEN3 ==========
arch/mips/au1000/common/setup.c:103:#ifdef CONFIG_MIPS_HYDROGEN3
========== PCMCIA_XXS1500 ==========
arch/mips/au1000/xxs1500/board_setup.c:66:#ifdef CONFIG_PCMCIA_XXS1500
========== RM9K_GE ==========
arch/mips/basler/excite/excite_device.c:314:#if defined(CONFIG_RM9K_GE) || defined(CONFIG_RM9K_GE_MODULE)
arch/mips/basler/excite/excite_device.c:367:#endif /* defined(CONFIG_RM9K_GE) || defined(CONFIG_RM9K_GE_MODULE) */
arch/mips/basler/excite/excite_device.c:314:#if defined(CONFIG_RM9K_GE) || defined(CONFIG_RM9K_GE_MODULE)
arch/mips/basler/excite/excite_device.c:367:#endif /* defined(CONFIG_RM9K_GE) || defined(CONFIG_RM9K_GE_MODULE) */
========== SIBYTE_BCM1480_PROF ==========
arch/mips/sibyte/bcm1480/irq.c:460:#ifdef CONFIG_SIBYTE_BCM1480_PROF
arch/mips/sibyte/bcm1480/irq.c:467:#ifdef CONFIG_SIBYTE_BCM1480_PROF
========== SIBYTE_SB1250_DUART ==========
arch/mips/configs/sb1250-swarm_defconfig:665:CONFIG_SIBYTE_SB1250_DUART=y
arch/mips/configs/bigsur_defconfig:673:CONFIG_SIBYTE_SB1250_DUART=y
arch/mips/sibyte/bcm1480/irq.c:79:#ifdef CONFIG_SIBYTE_SB1250_DUART
arch/mips/sibyte/bcm1480/irq.c:407:#ifdef CONFIG_SIBYTE_SB1250_DUART
arch/mips/sibyte/sb1250/irq.c:64:#ifdef CONFIG_SIBYTE_SB1250_DUART
arch/mips/sibyte/sb1250/irq.c:362:#ifdef CONFIG_SIBYTE_SB1250_DUART
arch/mips/sibyte/cfe/console.c:49:#ifdef CONFIG_SIBYTE_SB1250_DUART
========== SMTC_IDLE_HOOK_DEBUG ==========
arch/mips/kernel/smtc.c:146:#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
arch/mips/kernel/smtc.c:181:#endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */
arch/mips/kernel/smtc.c:399:#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
arch/mips/kernel/smtc.c:402:#endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */
arch/mips/kernel/smtc.c:614:#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
arch/mips/kernel/smtc.c:828:#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
arch/mips/kernel/smtc.c:830:#endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */
arch/mips/kernel/smtc.c:1055:#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
arch/mips/kernel/smtc.c:1148:#endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */
arch/mips/kernel/process.c:54:#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
arch/mips/Kconfig.debug:40:config CONFIG_SMTC_IDLE_HOOK_DEBUG
========== SOUND_AU1X00 ==========
arch/mips/au1000/common/setup.c:116:#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
========== TX4927BUG_WORKAROUND ==========
arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c:141:#define CONFIG_TX4927BUG_WORKAROUND
arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c:672:#ifdef CONFIG_TX4927BUG_WORKAROUND
arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c:914:#ifdef CONFIG_TX4927BUG_WORKAROUND
========== USB_OHCI ==========
arch/mips/au1000/pb1000/board_setup.c:57:#ifdef CONFIG_USB_OHCI
arch/mips/au1000/pb1000/board_setup.c:105:#ifdef CONFIG_USB_OHCI
arch/mips/au1000/pb1000/board_setup.c:119:#endif // defined (CONFIG_USB_OHCI)
arch/mips/au1000/pb1500/board_setup.c:59:#ifdef CONFIG_USB_OHCI
arch/mips/au1000/pb1500/board_setup.c:88:#ifdef CONFIG_USB_OHCI
arch/mips/au1000/pb1500/board_setup.c:98:#endif // defined (CONFIG_USB_OHCI)
arch/mips/au1000/pb1100/board_setup.c:57:#ifdef CONFIG_USB_OHCI
arch/mips/au1000/pb1100/board_setup.c:101:#endif // defined (CONFIG_USB_OHCI)
arch/mips/au1000/mtx-1/board_setup.c:57:#ifdef CONFIG_USB_OHCI
arch/mips/au1000/mtx-1/board_setup.c:61:#endif // defined (CONFIG_USB_OHCI)
--
Some of the stuff does exist intentionally such as the R4000 bits. Much
of the remainder however seems to be waiting to be chainsawed.
Ralf
next reply other threads:[~2007-07-05 14:46 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-07-05 14:46 Ralf Baechle [this message]
2007-07-05 15:01 ` dead(?) MIPS config stuff Robert P. J. Day
2007-07-05 15:26 ` Ralf Baechle
2007-07-05 15:26 ` Robert P. J. Day
2007-07-05 15:27 ` Maciej W. Rozycki
2007-07-05 16:03 ` Sergei Shtylyov
2007-07-12 16:56 ` Atsushi Nemoto
2007-07-05 16:23 ` Kevin D. Kissell
2007-07-05 16:23 ` Kevin D. Kissell
2007-07-05 16:28 ` Robert P. J. Day
2007-07-05 16:37 ` Ralf Baechle
2007-07-05 16:48 ` Geert Uytterhoeven
2007-07-05 16:36 ` Ralf Baechle
2007-07-05 16:45 ` Ralf Baechle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070705144641.GA20210@linux-mips.org \
--to=ralf@linux-mips.org \
--cc=linux-mips@linux-mips.org \
--cc=rpjday@mindspring.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox