* [PATCH 10/11] MTX-1 code style cleanup
@ 2008-04-30 19:30 Sergei Shtylyov
2008-05-02 20:28 ` Ralf Baechle
0 siblings, 1 reply; 2+ messages in thread
From: Sergei Shtylyov @ 2008-04-30 19:30 UTC (permalink / raw)
To: ralf; +Cc: linux-mips
Fix many errors and warnings given by checkpatch.pl:
- space after opening and before closing parentheses;
- use of C99 // comments;
- leading spaces instead of tabs;
- brace not on the same line with 'else' in the 'if' statement;
statement;
- printk() without KERN_* facility level;
- using simple_strtol() where strict_strtol() could be used.
- including <asm/gpio.h> instead of <linux/gpio.h>.
In addition to these changes, also do the following:
- insert spaces between operator and its operands;
- replace tab between the function type and name with space in mtx1_pci_idsel()
declaration;
- remove space after the type cast's closing parenthesis;
- insert missing space before closing brace in the array/structure initializers;
- update MontaVista copyright;
- remove Pete Popov's old email address...
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
arch/mips/au1000/mtx-1/Makefile | 3 -
arch/mips/au1000/mtx-1/board_setup.c | 65 ++++++++++++++++-------------------
arch/mips/au1000/mtx-1/init.c | 11 ++---
arch/mips/au1000/mtx-1/irqmap.c | 18 ++++-----
arch/mips/au1000/mtx-1/platform.c | 3 -
5 files changed, 47 insertions(+), 53 deletions(-)
Index: linux-2.6/arch/mips/au1000/mtx-1/Makefile
===================================================================
--- linux-2.6.orig/arch/mips/au1000/mtx-1/Makefile
+++ linux-2.6/arch/mips/au1000/mtx-1/Makefile
@@ -1,7 +1,6 @@
#
# Copyright 2003 MontaVista Software Inc.
-# Author: MontaVista Software, Inc.
-# ppopov@mvista.com or source@mvista.com
+# Author: MontaVista Software, Inc. <source@mvista.com>
# Bruno Randolf <bruno.randolf@4g-systems.biz>
#
# Makefile for 4G Systems MTX-1 board.
Index: linux-2.6/arch/mips/au1000/mtx-1/board_setup.c
===================================================================
--- linux-2.6.orig/arch/mips/au1000/mtx-1/board_setup.c
+++ linux-2.6/arch/mips/au1000/mtx-1/board_setup.c
@@ -3,9 +3,8 @@
* BRIEF MODULE DESCRIPTION
* 4G Systems MTX-1 board setup.
*
- * Copyright 2003 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2003, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
* Bruno Randolf <bruno.randolf@4g-systems.biz>
*
* This program is free software; you can redistribute it and/or modify it
@@ -34,7 +33,7 @@
#include <asm/mach-au1x00/au1000.h>
extern int (*board_pci_idsel)(unsigned int devsel, int assert);
-int mtx1_pci_idsel(unsigned int devsel, int assert);
+int mtx1_pci_idsel(unsigned int devsel, int assert);
void board_reset(void)
{
@@ -45,36 +44,36 @@ void board_reset(void)
void __init board_setup(void)
{
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
- // enable USB power switch
- au_writel( au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR );
- au_writel( 0x100000, GPIO2_OUTPUT );
+ /* Enable USB power switch */
+ au_writel(au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR);
+ au_writel(0x100000, GPIO2_OUTPUT);
#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
#ifdef CONFIG_PCI
#if defined(__MIPSEB__)
- au_writel(0xf | (2<<6) | (1<<4), Au1500_PCI_CFG);
+ au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
#else
au_writel(0xf, Au1500_PCI_CFG);
#endif
#endif
- // initialize sys_pinfunc:
- au_writel( SYS_PF_NI2, SYS_PINFUNC );
+ /* Initialize sys_pinfunc */
+ au_writel(SYS_PF_NI2, SYS_PINFUNC);
- // initialize GPIO
- au_writel( 0xFFFFFFFF, SYS_TRIOUTCLR );
- au_writel( 0x00000001, SYS_OUTPUTCLR ); // set M66EN (PCI 66MHz) to OFF
- au_writel( 0x00000008, SYS_OUTPUTSET ); // set PCI CLKRUN# to OFF
- au_writel( 0x00000002, SYS_OUTPUTSET ); // set EXT_IO3 ON
- au_writel( 0x00000020, SYS_OUTPUTCLR ); // set eth PHY TX_ER to OFF
-
- // enable LED and set it to green
- au_writel( au_readl(GPIO2_DIR) | 0x1800, GPIO2_DIR );
- au_writel( 0x18000800, GPIO2_OUTPUT );
+ /* Initialize GPIO */
+ au_writel(0xFFFFFFFF, SYS_TRIOUTCLR);
+ au_writel(0x00000001, SYS_OUTPUTCLR); /* set M66EN (PCI 66MHz) to OFF */
+ au_writel(0x00000008, SYS_OUTPUTSET); /* set PCI CLKRUN# to OFF */
+ au_writel(0x00000002, SYS_OUTPUTSET); /* set EXT_IO3 ON */
+ au_writel(0x00000020, SYS_OUTPUTCLR); /* set eth PHY TX_ER to OFF */
+
+ /* Enable LED and set it to green */
+ au_writel(au_readl(GPIO2_DIR) | 0x1800, GPIO2_DIR);
+ au_writel(0x18000800, GPIO2_OUTPUT);
board_pci_idsel = mtx1_pci_idsel;
- printk("4G Systems MTX-1 Board\n");
+ printk(KERN_INFO "4G Systems MTX-1 Board\n");
}
int
@@ -82,20 +81,18 @@ mtx1_pci_idsel(unsigned int devsel, int
{
#define MTX_IDSEL_ONLY_0_AND_3 0
#if MTX_IDSEL_ONLY_0_AND_3
- if (devsel != 0 && devsel != 3) {
- printk("*** not 0 or 3\n");
- return 0;
- }
+ if (devsel != 0 && devsel != 3) {
+ printk(KERN_ERR "*** not 0 or 3\n");
+ return 0;
+ }
#endif
- if (assert && devsel != 0) {
- // suppress signal to cardbus
- au_writel( 0x00000002, SYS_OUTPUTCLR ); // set EXT_IO3 OFF
- }
- else {
- au_writel( 0x00000002, SYS_OUTPUTSET ); // set EXT_IO3 ON
- }
- au_sync_udelay(1);
- return 1;
+ if (assert && devsel != 0)
+ /* Suppress signal to Cardbus */
+ au_writel(0x00000002, SYS_OUTPUTCLR); /* set EXT_IO3 OFF */
+ else
+ au_writel(0x00000002, SYS_OUTPUTSET); /* set EXT_IO3 ON */
+ au_sync_udelay(1);
+ return 1;
}
Index: linux-2.6/arch/mips/au1000/mtx-1/init.c
===================================================================
--- linux-2.6.orig/arch/mips/au1000/mtx-1/init.c
+++ linux-2.6/arch/mips/au1000/mtx-1/init.c
@@ -3,9 +3,8 @@
* BRIEF MODULE DESCRIPTION
* 4G Systems MTX-1 board setup
*
- * Copyright 2003 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2003, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
* Bruno Randolf <bruno.randolf@4g-systems.biz>
*
* This program is free software; you can redistribute it and/or modify it
@@ -47,8 +46,8 @@ void __init prom_init(void)
unsigned long memsize;
prom_argc = fw_arg0;
- prom_argv = (char **) fw_arg1;
- prom_envp = (char **) fw_arg2;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg2;
prom_init_cmdline();
@@ -56,6 +55,6 @@ void __init prom_init(void)
if (!memsize_str)
memsize = 0x04000000;
else
- memsize = simple_strtol(memsize_str, NULL, 0);
+ memsize = strict_strtol(memsize_str, 0, NULL);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
Index: linux-2.6/arch/mips/au1000/mtx-1/irqmap.c
===================================================================
--- linux-2.6.orig/arch/mips/au1000/mtx-1/irqmap.c
+++ linux-2.6/arch/mips/au1000/mtx-1/irqmap.c
@@ -31,18 +31,18 @@
#include <asm/mach-au1x00/au1000.h>
char irq_tab_alchemy[][5] __initdata = {
- [0] = { -1, INTA, INTA, INTX, INTX}, /* IDSEL 00 - AdapterA-Slot0 (top) */
- [1] = { -1, INTB, INTA, INTX, INTX}, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
- [2] = { -1, INTC, INTD, INTX, INTX}, /* IDSEL 02 - AdapterB-Slot0 (top) */
- [3] = { -1, INTD, INTC, INTX, INTX}, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
- [4] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 04 - AdapterC-Slot0 (top) */
- [5] = { -1, INTB, INTA, INTX, INTX}, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
- [6] = { -1, INTC, INTD, INTX, INTX}, /* IDSEL 06 - AdapterD-Slot0 (top) */
- [7] = { -1, INTD, INTC, INTX, INTX}, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
+ [0] = { -1, INTA, INTA, INTX, INTX }, /* IDSEL 00 - AdapterA-Slot0 (top) */
+ [1] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
+ [2] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 02 - AdapterB-Slot0 (top) */
+ [3] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
+ [4] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 04 - AdapterC-Slot0 (top) */
+ [5] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
+ [6] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 06 - AdapterD-Slot0 (top) */
+ [7] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
};
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
- { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
+ { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 },
{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
Index: linux-2.6/arch/mips/au1000/mtx-1/platform.c
===================================================================
--- linux-2.6.orig/arch/mips/au1000/mtx-1/platform.c
+++ linux-2.6/arch/mips/au1000/mtx-1/platform.c
@@ -21,11 +21,10 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
+#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
-#include <asm/gpio.h>
-
static struct gpio_keys_button mtx1_gpio_button[] = {
{
.gpio = 207,
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH 10/11] MTX-1 code style cleanup
2008-04-30 19:30 [PATCH 10/11] MTX-1 code style cleanup Sergei Shtylyov
@ 2008-05-02 20:28 ` Ralf Baechle
0 siblings, 0 replies; 2+ messages in thread
From: Ralf Baechle @ 2008-05-02 20:28 UTC (permalink / raw)
To: Sergei Shtylyov; +Cc: linux-mips
Applied. Thanks,
Ralf
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2008-05-02 20:28 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-04-30 19:30 [PATCH 10/11] MTX-1 code style cleanup Sergei Shtylyov
2008-05-02 20:28 ` Ralf Baechle
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox