* SGI O2 sound driver
@ 2008-06-28 0:09 Thomas Bogendoerfer
2008-06-28 14:13 ` Thomas Bogendoerfer
0 siblings, 1 reply; 8+ messages in thread
From: Thomas Bogendoerfer @ 2008-06-28 0:09 UTC (permalink / raw)
To: linux-mips
Hi
after seeing another request for an O2 sound driver on #mipslinux,
I decided to have a look on my own, what's so difficult about it.
Below is my first working driver, which is able to play .mp3 with
mpg321. The trick to get it working was to dma_alloc_coherent
the dma ring buffer instead of using get_free_pages(). The driver
is still missing cleanups and features.
Thomas.
include/sound/ad1843.h | 47 +++
sound/mips/Kconfig | 6 +
sound/mips/Makefile | 2 +
sound/mips/ad1843.c | 622 +++++++++++++++++++++++++++++++++++++
sound/mips/sgio2audio.c | 789 +++++++++++++++++++++++++++++++++++++++++++++++
5 files changed, 1466 insertions(+), 0 deletions(-)
diff --git a/include/sound/ad1843.h b/include/sound/ad1843.h
new file mode 100644
index 0000000..0a85e19
--- /dev/null
+++ b/include/sound/ad1843.h
@@ -0,0 +1,47 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright 2003 Vivien Chappelier <vivien.chappelier@linux-mips.org>
+ */
+
+#ifndef __SOUND_AD1843_H
+#define __SOUND_AD1843_H
+
+typedef struct {
+ void *chip;
+ int (* read)(void *chip, int reg);
+ int (* write)(void *chip, int reg, int val);
+} ad1843_t;
+
+#define AD1843_GAIN_RECLEV 0
+#define AD1843_GAIN_LINE 1
+#define AD1843_GAIN_CD 2
+#define AD1843_GAIN_MIC 3
+#define AD1843_GAIN_PCM_0 4
+#define AD1843_GAIN_PCM_1 5
+#define AD1843_GAIN_SIZE AD1843_GAIN_PCM_1+1
+
+int ad1843_get_gain(ad1843_t *ad1843, int id);
+int ad1843_set_gain(ad1843_t *ad1843, int id, int newval);
+int ad1843_get_recsrc(ad1843_t *ad1843);
+void ad1843_set_resample_mode(ad1843_t *ad1843, int onoff);
+int ad1843_set_recsrc(ad1843_t *ad1843, int newsrc);
+int ad1843_get_outsrc(ad1843_t *ad1843);
+int ad1843_set_outsrc(ad1843_t *ad1843, int mask);
+void ad1843_setup_dac(ad1843_t *ad1843,
+ unsigned int id,
+ unsigned int framerate,
+ snd_pcm_format_t fmt,
+ unsigned int channels);
+void ad1843_shutdown_dac(ad1843_t *ad1843,
+ unsigned int id);
+void ad1843_setup_adc(ad1843_t *ad1843,
+ unsigned int framerate,
+ snd_pcm_format_t fmt,
+ unsigned int channels);
+void ad1843_shutdown_adc(ad1843_t *ad1843);
+int ad1843_init(ad1843_t *ad1843);
+
+#endif /* __SOUND_AD1843_H */
diff --git a/sound/mips/Kconfig b/sound/mips/Kconfig
index 531f8ba..a3e202e 100644
--- a/sound/mips/Kconfig
+++ b/sound/mips/Kconfig
@@ -11,5 +11,11 @@ config SND_AU1X00
help
ALSA Sound driver for the Au1x00's AC97 port.
+config SND_SGI_O2
+ tristate "SGI O2 Audio"
+ depends on SND && SGI_IP32
+ help
+ Sound support for the SGI O2 Workstation.
+
endmenu
diff --git a/sound/mips/Makefile b/sound/mips/Makefile
index 47afed9..55624d8 100644
--- a/sound/mips/Makefile
+++ b/sound/mips/Makefile
@@ -2,7 +2,9 @@
# Makefile for ALSA
#
+snd-sgi-o2-objs := sgio2audio.o ad1843.o
snd-au1x00-objs := au1x00.o
# Toplevel Module Dependency
obj-$(CONFIG_SND_AU1X00) += snd-au1x00.o
+obj-$(CONFIG_SND_SGI_O2) += snd-sgi-o2.o
diff --git a/sound/mips/ad1843.c b/sound/mips/ad1843.c
new file mode 100644
index 0000000..a891d2a
--- /dev/null
+++ b/sound/mips/ad1843.c
@@ -0,0 +1,622 @@
+/*
+ * AD1843 low level driver
+ *
+ * Copyright 2003 Vivien Chappelier <vivien.chappelier@linux-mips.org>
+ *
+ * inspired from vwsnd.c (SGI VW audio driver)
+ * Copyright 1999 Silicon Graphics, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/slab.h>
+
+#include <linux/init.h>
+#include <linux/jiffies.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/initval.h>
+#include <sound/ad1843.h>
+
+// TEMP: OSS stuff
+#include <linux/soundcard.h>
+
+/*
+ * AD1843 bitfield definitions. All are named as in the AD1843 data
+ * sheet, with ad1843_ prepended and individual bit numbers removed.
+ *
+ * E.g., bits LSS0 through LSS2 become ad1843_LSS.
+ *
+ * Only the bitfields we need are defined.
+ */
+
+typedef struct ad1843_bitfield {
+ char reg;
+ char lo_bit;
+ char nbits;
+} ad1843_bitfield_t;
+
+static const ad1843_bitfield_t
+ ad1843_PDNO = { 0, 14, 1 }, /* Converter Power-Down Flag */
+ ad1843_INIT = { 0, 15, 1 }, /* Clock Initialization Flag */
+ ad1843_RIG = { 2, 0, 4 }, /* Right ADC Input Gain */
+ ad1843_RMGE = { 2, 4, 1 }, /* Right ADC Mic Gain Enable */
+ ad1843_RSS = { 2, 5, 3 }, /* Right ADC Source Select */
+ ad1843_LIG = { 2, 8, 4 }, /* Left ADC Input Gain */
+ ad1843_LMGE = { 2, 12, 1 }, /* Left ADC Mic Gain Enable */
+ ad1843_LSS = { 2, 13, 3 }, /* Left ADC Source Select */
+ ad1843_RX1M = { 4, 0, 5 }, /* Right Aux 1 Mix Gain/Atten */
+ ad1843_RX1MM = { 4, 7, 1 }, /* Right Aux 1 Mix Mute */
+ ad1843_LX1M = { 4, 8, 5 }, /* Left Aux 1 Mix Gain/Atten */
+ ad1843_LX1MM = { 4, 15, 1 }, /* Left Aux 1 Mix Mute */
+ ad1843_RX2M = { 5, 0, 5 }, /* Right Aux 2 Mix Gain/Atten */
+ ad1843_RX2MM = { 5, 7, 1 }, /* Right Aux 2 Mix Mute */
+ ad1843_LX2M = { 5, 8, 5 }, /* Left Aux 2 Mix Gain/Atten */
+ ad1843_LX2MM = { 5, 15, 1 }, /* Left Aux 2 Mix Mute */
+ ad1843_RMCM = { 7, 0, 5 }, /* Right Mic Mix Gain/Atten */
+ ad1843_RMCMM = { 7, 7, 1 }, /* Right Mic Mix Mute */
+ ad1843_LMCM = { 7, 8, 5 }, /* Left Mic Mix Gain/Atten */
+ ad1843_LMCMM = { 7, 15, 1 }, /* Left Mic Mix Mute */
+ ad1843_HPOS = { 8, 4, 1 }, /* Headphone Output Voltage Swing */
+ ad1843_HPOM = { 8, 5, 1 }, /* Headphone Output Mute */
+ ad1843_MPOM = { 8, 6, 1 }, /* Mono Output Mute */
+ ad1843_RDA1G = { 9, 0, 6 }, /* Right DAC1 Analog/Digital Gain */
+ ad1843_RDA1GM = { 9, 7, 1 }, /* Right DAC1 Analog Mute */
+ ad1843_LDA1G = { 9, 8, 6 }, /* Left DAC1 Analog/Digital Gain */
+ ad1843_LDA1GM = { 9, 15, 1 }, /* Left DAC1 Analog Mute */
+ ad1843_RDA2G = { 9, 0, 6 }, /* Right DAC2 Analog/Digital Gain */
+ ad1843_RDA2GM = { 9, 7, 1 }, /* Right DAC2 Analog Mute */
+ ad1843_LDA2G = { 9, 8, 6 }, /* Left DAC2 Analog/Digital Gain */
+ ad1843_LDA2GM = { 9, 15, 1 }, /* Left DAC2 Analog Mute */
+ ad1843_RDA1AM = { 11, 7, 1 }, /* Right DAC1 Digital Mute */
+ ad1843_LDA1AM = { 11, 15, 1 }, /* Left DAC1 Digital Mute */
+ ad1843_RDA2AM = { 11, 7, 1 }, /* Right DAC1 Digital Mute */
+ ad1843_LDA2AM = { 11, 15, 1 }, /* Left DAC1 Digital Mute */
+ ad1843_ADLC = { 15, 0, 2 }, /* ADC Left Sample Rate Source */
+ ad1843_ADRC = { 15, 2, 2 }, /* ADC Right Sample Rate Source */
+ ad1843_DA1C = { 15, 8, 2 }, /* DAC1 Sample Rate Source */
+ ad1843_DA2C = { 15, 10, 2 }, /* DAC2 Sample Rate Source */
+ ad1843_C1C = { 17, 0, 16 }, /* Clock 1 Sample Rate Select */
+ ad1843_C2C = { 20, 0, 16 }, /* Clock 2 Sample Rate Select */
+ ad1843_C3C = { 23, 0, 16 }, /* Clock 3 Sample Rate Select */
+ ad1843_DAADL = { 25, 4, 2 }, /* Digital ADC Left Source Select */
+ ad1843_DAADR = { 25, 6, 2 }, /* Digital ADC Right Source Select */
+ ad1843_DRSFLT = { 25, 15, 1 }, /* Digital Reampler Filter Mode */
+ ad1843_ADLF = { 26, 0, 2 }, /* ADC Left Channel Data Format */
+ ad1843_ADRF = { 26, 2, 2 }, /* ADC Right Channel Data Format */
+ ad1843_ADTLK = { 26, 4, 1 }, /* ADC Transmit Lock Mode Select */
+ ad1843_SCF = { 26, 7, 1 }, /* SCLK Frequency Select */
+ ad1843_DA1F = { 26, 8, 2 }, /* DAC1 Data Format Select */
+ ad1843_DA2F = { 26, 10, 2 }, /* DAC2 Data Format Select */
+ ad1843_DA1SM = { 26, 14, 1 }, /* DAC1 Stereo/Mono Mode Select */
+ ad1843_DA2SM = { 26, 15, 1 }, /* DAC2 Stereo/Mono Mode Select */
+ ad1843_ADLEN = { 27, 0, 1 }, /* ADC Left Channel Enable */
+ ad1843_ADREN = { 27, 1, 1 }, /* ADC Right Channel Enable */
+ ad1843_AAMEN = { 27, 4, 1 }, /* Analog to Analog Mix Enable */
+ ad1843_ANAEN = { 27, 7, 1 }, /* Analog Channel Enable */
+ ad1843_DA1EN = { 27, 8, 1 }, /* DAC1 Enable */
+ ad1843_DA2EN = { 27, 9, 1 }, /* DAC2 Enable */
+ ad1843_C1EN = { 28, 11, 1 }, /* Clock Generator 1 Enable */
+ ad1843_C2EN = { 28, 12, 1 }, /* Clock Generator 2 Enable */
+ ad1843_C3EN = { 28, 13, 1 }, /* Clock Generator 3 Enable */
+ ad1843_PDNI = { 28, 15, 1 }; /* Converter Power Down */
+
+/*
+ * The various registers of the AD1843 use three different formats for
+ * specifying gain. The ad1843_gain structure parameterizes the
+ * formats.
+ */
+
+typedef struct ad1843_gain {
+ int negative; /* nonzero if gain is negative. */
+ const ad1843_bitfield_t *lfield;
+ const ad1843_bitfield_t *rfield;
+} ad1843_gain_t;
+
+const ad1843_gain_t ad1843_gain_RECLEV
+ = { 0, &ad1843_LIG, &ad1843_RIG };
+const ad1843_gain_t ad1843_gain_LINE
+ = { 1, &ad1843_LX1M, &ad1843_RX1M };
+const ad1843_gain_t ad1843_gain_CD
+ = { 1, &ad1843_LX2M, &ad1843_RX2M };
+const ad1843_gain_t ad1843_gain_MIC
+ = { 1, &ad1843_LMCM, &ad1843_RMCM };
+const ad1843_gain_t ad1843_gain_PCM_0
+ = { 1, &ad1843_LDA1G, &ad1843_RDA1G };
+const ad1843_gain_t ad1843_gain_PCM_1
+ = { 1, &ad1843_LDA2G, &ad1843_RDA2G };
+
+const ad1843_gain_t *ad1843_gain[AD1843_GAIN_SIZE] = {
+ &ad1843_gain_RECLEV,
+ &ad1843_gain_LINE,
+ &ad1843_gain_CD,
+ &ad1843_gain_MIC,
+ &ad1843_gain_PCM_0,
+ &ad1843_gain_PCM_1,
+};
+
+/* read the current value of an AD1843 bitfield. */
+
+static int ad1843_read_bits(ad1843_t *ad1843, const ad1843_bitfield_t *field)
+{
+ int w = ad1843->read(ad1843->chip, field->reg);
+ int val = w >> field->lo_bit & ((1 << field->nbits) - 1);
+
+ return val;
+}
+
+/*
+ * write a new value to an AD1843 bitfield and return the old value.
+ */
+
+static int ad1843_write_bits(ad1843_t *ad1843,
+ const ad1843_bitfield_t *field,
+ int newval)
+{
+ int w = ad1843->read(ad1843->chip, field->reg);
+ int mask = ((1 << field->nbits) - 1) << field->lo_bit;
+ int oldval = (w & mask) >> field->lo_bit;
+ int newbits = (newval << field->lo_bit) & mask;
+ w = (w & ~mask) | newbits;
+ (void) ad1843->write(ad1843->chip, field->reg, w);
+
+ return oldval;
+}
+
+/*
+ * ad1843_read_multi reads multiple bitfields from the same AD1843
+ * register. It uses a single read cycle to do it. (Reading the
+ * ad1843 requires 256 bit times at 12.288 MHz, or nearly 20
+ * microseconds.)
+ *
+ * Called like this.
+ *
+ * ad1843_read_multi(ad1843, nfields,
+ * &ad1843_FIELD1, &val1,
+ * &ad1843_FIELD2, &val2, ...);
+ */
+
+static void ad1843_read_multi(ad1843_t *ad1843, int argcount, ...)
+{
+ va_list ap;
+ const ad1843_bitfield_t *fp;
+ int w = 0, mask, *value, reg = -1;
+
+ va_start(ap, argcount);
+ while (--argcount >= 0) {
+ fp = va_arg(ap, const ad1843_bitfield_t *);
+ value = va_arg(ap, int *);
+ if (reg == -1) {
+ reg = fp->reg;
+ w = ad1843->read(ad1843->chip, reg);
+ }
+
+ mask = (1 << fp->nbits) - 1;
+ *value = w >> fp->lo_bit & mask;
+ }
+ va_end(ap);
+}
+
+/*
+ * ad1843_write_multi stores multiple bitfields into the same AD1843
+ * register. It uses one read and one write cycle to do it.
+ *
+ * Called like this.
+ *
+ * ad1843_write_multi(ad1843, nfields,
+ * &ad1843_FIELD1, val1,
+ * &ad1843_FIELF2, val2, ...);
+ */
+
+static void ad1843_write_multi(ad1843_t *ad1843, int argcount, ...)
+{
+ va_list ap;
+ int reg;
+ const ad1843_bitfield_t *fp;
+ int value;
+ int w, m, mask, bits;
+
+ mask = 0;
+ bits = 0;
+ reg = -1;
+
+ va_start(ap, argcount);
+ while (--argcount >= 0) {
+ fp = va_arg(ap, const ad1843_bitfield_t *);
+ value = va_arg(ap, int);
+ if (reg == -1)
+ reg = fp->reg;
+
+ m = ((1 << fp->nbits) - 1) << fp->lo_bit;
+ mask |= m;
+ bits |= (value << fp->lo_bit) & m;
+ }
+ va_end(ap);
+
+ if (~mask & 0xFFFF)
+ w = ad1843->read(ad1843->chip, reg);
+ else
+ w = 0;
+ w = (w & ~mask) | bits;
+ (void) ad1843->write(ad1843->chip, reg, w);
+}
+
+/*
+ * ad1843_get_gain reads the specified register and extracts the gain value
+ * using the supplied gain type. It returns the gain in OSS format.
+ */
+
+int ad1843_get_gain(ad1843_t *ad1843, int id)
+{
+ int lg, rg;
+ const ad1843_gain_t *gp = ad1843_gain[id];
+ unsigned short mask = (1 << gp->lfield->nbits) - 1;
+
+ ad1843_read_multi(ad1843, 2, gp->lfield, &lg, gp->rfield, &rg);
+ if (gp->negative) {
+ lg = mask - lg;
+ rg = mask - rg;
+ }
+ lg = (lg * 100 + (mask >> 1)) / mask;
+ rg = (rg * 100 + (mask >> 1)) / mask;
+ return lg << 0 | rg << 8;
+}
+
+/*
+ * Set an audio channel's gain. Converts from OSS format to AD1843's
+ * format.
+ *
+ * Returns the new gain, which may be lower than the old gain.
+ */
+
+int ad1843_set_gain(ad1843_t *ad1843,
+ int id,
+ int newval)
+{
+ const ad1843_gain_t *gp = ad1843_gain[id];
+ unsigned short mask = (1 << gp->lfield->nbits) - 1;
+
+ int lg = newval >> 0 & 0xFF;
+ int rg = newval >> 8;
+ if (lg < 0 || lg > 100 || rg < 0 || rg > 100)
+ return -EINVAL;
+ lg = (lg * mask + (mask >> 1)) / 100;
+ rg = (rg * mask + (mask >> 1)) / 100;
+ if (gp->negative) {
+ lg = mask - lg;
+ rg = mask - rg;
+ }
+ ad1843_write_multi(ad1843, 2, gp->lfield, lg, gp->rfield, rg);
+ return ad1843_get_gain(ad1843, id);
+}
+
+/* Returns the current recording source, in OSS format. */
+
+int ad1843_get_recsrc(ad1843_t *ad1843)
+{
+ int ls = ad1843_read_bits(ad1843, &ad1843_LSS);
+
+ switch (ls) {
+ case 1:
+ return SOUND_MASK_MIC;
+ case 2:
+ return SOUND_MASK_LINE;
+ case 3:
+ return SOUND_MASK_CD;
+ case 6:
+ return SOUND_MASK_PCM;
+ default:
+ return -1;
+ }
+}
+
+/*
+ * Enable/disable digital resample mode in the AD1843.
+ *
+ * The AD1843 requires that ADL, ADR, DA1 and DA2 be powered down
+ * while switching modes. So we save DA's state, power them down,
+ * switch into/out of resample mode, power them up, and restore state.
+ *
+ * This will cause audible glitches if D/A or A/D is going on, so the
+ * driver disallows that (in mixer_write_ioctl()).
+ *
+ * The open question is, is this worth doing? I'm leaving it in,
+ * because it's written, but...
+ */
+
+void ad1843_set_resample_mode(ad1843_t *ad1843, int onoff)
+{
+ /* Save DA's mute and gain (addr 9/10 is analog gain/attenuation) */
+ int save_da1 = ad1843->read(ad1843->chip, 9);
+ int save_da2 = ad1843->read(ad1843->chip, 10);
+
+ /* Power down A/D and D/A. */
+ ad1843_write_multi(ad1843, 4,
+ &ad1843_DA1EN, 0,
+ &ad1843_DA2EN, 0,
+ &ad1843_ADLEN, 0,
+ &ad1843_ADREN, 0);
+
+ /* Switch mode */
+ ad1843_write_bits(ad1843, &ad1843_DRSFLT, onoff);
+
+ /* Power up A/D and D/A. */
+ ad1843_write_multi(ad1843, 3,
+ &ad1843_DA1EN, 1,
+ &ad1843_DA2EN, 1,
+ &ad1843_ADLEN, 1,
+ &ad1843_ADREN, 1);
+
+ /* Restore DA's mute and gain. */
+ ad1843->write(ad1843->chip, 9, save_da1);
+ ad1843->write(ad1843->chip, 10, save_da2);
+}
+
+/*
+ * Set recording source. Arg newsrc specifies an OSS channel mask.
+ *
+ * The complication is that when we switch into/out of loopback mode
+ * (i.e., src = SOUND_MASK_PCM), we change the AD1843 into/out of
+ * digital resampling mode.
+ *
+ * Returns newsrc on success, -errno on failure.
+ */
+
+int ad1843_set_recsrc(ad1843_t *ad1843, int newsrc)
+{
+ int bits;
+ int oldbits;
+
+ switch (newsrc) {
+ case SOUND_MASK_PCM:
+ bits = 6;
+ break;
+
+ case SOUND_MASK_MIC:
+ bits = 1;
+ break;
+
+ case SOUND_MASK_LINE:
+ bits = 2;
+ break;
+
+ case SOUND_MASK_CD:
+ bits = 3;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+ oldbits = ad1843_read_bits(ad1843, &ad1843_LSS);
+ if (newsrc == SOUND_MASK_PCM && oldbits != 6) {
+
+ ad1843_set_resample_mode(ad1843, 1);
+ ad1843_write_multi(ad1843, 2,
+ &ad1843_DAADL, 2,
+ &ad1843_DAADR, 2);
+ } else if (newsrc != SOUND_MASK_PCM && oldbits == 6) {
+
+ ad1843_set_resample_mode(ad1843, 0);
+ ad1843_write_multi(ad1843, 2,
+ &ad1843_DAADL, 0,
+ &ad1843_DAADR, 0);
+ }
+ ad1843_write_multi(ad1843, 2, &ad1843_LSS, bits, &ad1843_RSS, bits);
+ return newsrc;
+}
+
+/*
+ * Return current output sources, in OSS format.
+ */
+
+int ad1843_get_outsrc(ad1843_t *ad1843)
+{
+ int pcm, line, mic, cd;
+
+ pcm = ad1843_read_bits(ad1843, &ad1843_LDA1GM) ? 0 : SOUND_MASK_PCM;
+ line = ad1843_read_bits(ad1843, &ad1843_LX1MM) ? 0 : SOUND_MASK_LINE;
+ cd = ad1843_read_bits(ad1843, &ad1843_LX2MM) ? 0 : SOUND_MASK_CD;
+ mic = ad1843_read_bits(ad1843, &ad1843_LMCMM) ? 0 : SOUND_MASK_MIC;
+
+ return pcm | line | cd | mic;
+}
+
+/*
+ * Set output sources. Arg is a mask of active sources in OSS format.
+ *
+ * Returns source mask on success, -errno on failure.
+ */
+
+int ad1843_set_outsrc(ad1843_t *ad1843, int mask)
+{
+ int pcm, line, mic, cd;
+
+ if (mask & ~(SOUND_MASK_PCM | SOUND_MASK_LINE |
+ SOUND_MASK_CD | SOUND_MASK_MIC))
+ return -EINVAL;
+ pcm = (mask & SOUND_MASK_PCM) ? 0 : 1;
+ line = (mask & SOUND_MASK_LINE) ? 0 : 1;
+ mic = (mask & SOUND_MASK_MIC) ? 0 : 1;
+ cd = (mask & SOUND_MASK_CD) ? 0 : 1;
+
+ ad1843_write_multi(ad1843, 2, &ad1843_LDA1GM, pcm, &ad1843_RDA1GM, pcm);
+ ad1843_write_multi(ad1843, 2, &ad1843_LX1MM, line, &ad1843_RX1MM, line);
+ ad1843_write_multi(ad1843, 2, &ad1843_LX2MM, cd, &ad1843_RX2MM, cd);
+ ad1843_write_multi(ad1843, 2, &ad1843_LMCMM, mic, &ad1843_RMCMM, mic);
+
+ return mask;
+}
+
+/* Setup ad1843 for D/A conversion. */
+
+void ad1843_setup_dac(ad1843_t *ad1843,
+ unsigned int id,
+ unsigned int framerate,
+ snd_pcm_format_t fmt,
+ unsigned int channels)
+{
+ int ad_fmt = 0, ad_mode = 0;
+
+ switch (fmt) {
+ case SNDRV_PCM_FORMAT_S8: ad_fmt = 0; break;
+ case SNDRV_PCM_FORMAT_U8: ad_fmt = 0; break;
+ case SNDRV_PCM_FORMAT_S16_LE: ad_fmt = 1; break;
+ case SNDRV_PCM_FORMAT_MU_LAW: ad_fmt = 2; break;
+ case SNDRV_PCM_FORMAT_A_LAW: ad_fmt = 3; break;
+ default: break;
+ }
+
+ switch (channels) {
+ case 2: ad_mode = 0; break;
+ case 1: ad_mode = 1; break;
+ default: break;
+ }
+
+ if(id) {
+ ad1843_write_bits(ad1843, &ad1843_C2C, framerate);
+ ad1843_write_multi(ad1843, 2,
+ &ad1843_DA2SM, ad_mode,
+ &ad1843_DA2F, ad_fmt);
+ } else {
+ ad1843_write_bits(ad1843, &ad1843_C1C, framerate);
+ ad1843_write_multi(ad1843, 2,
+ &ad1843_DA1SM, ad_mode,
+ &ad1843_DA1F, ad_fmt);
+ }
+}
+
+void ad1843_shutdown_dac(ad1843_t *ad1843, unsigned int id)
+{
+ if(id)
+ ad1843_write_bits(ad1843, &ad1843_DA2F, 1);
+ else
+ ad1843_write_bits(ad1843, &ad1843_DA1F, 1);
+}
+
+void ad1843_setup_adc(ad1843_t *ad1843,
+ unsigned int framerate,
+ snd_pcm_format_t fmt,
+ unsigned int channels)
+{
+ int da_fmt = 0;
+
+ switch (fmt) {
+ case SNDRV_PCM_FORMAT_S8: da_fmt = 0; break;
+ case SNDRV_PCM_FORMAT_U8: da_fmt = 0; break;
+ case SNDRV_PCM_FORMAT_S16_LE: da_fmt = 1; break;
+ case SNDRV_PCM_FORMAT_MU_LAW: da_fmt = 2; break;
+ case SNDRV_PCM_FORMAT_A_LAW: da_fmt = 3; break;
+ default: break;
+ }
+
+ ad1843_write_bits(ad1843, &ad1843_C3C, framerate);
+ ad1843_write_multi(ad1843, 2,
+ &ad1843_ADLF, da_fmt, &ad1843_ADRF, da_fmt);
+}
+
+void ad1843_shutdown_adc(ad1843_t *ad1843)
+{
+ /* nothing to do */
+}
+
+/*
+ * Fully initialize the ad1843. As described in the AD1843 data
+ * sheet, section "START-UP SEQUENCE". The numbered comments are
+ * subsection headings from the data sheet. See the data sheet, pages
+ * 52-54, for more info.
+ *
+ * return 0 on success, -errno on failure. */
+
+int ad1843_init(ad1843_t *ad1843)
+{
+ unsigned long later;
+
+ if (ad1843_read_bits(ad1843, &ad1843_INIT) != 0) {
+ printk(KERN_ERR "ad1843: AD1843 won't initialize\n");
+ return -EIO;
+ }
+
+ ad1843_write_bits(ad1843, &ad1843_SCF, 1);
+
+ /* 4. Put the conversion resources into standby. */
+ ad1843_write_bits(ad1843, &ad1843_PDNI, 0);
+ later = jiffies + HZ / 2; /* roughly half a second */
+
+ while (ad1843_read_bits(ad1843, &ad1843_PDNO)) {
+ if (time_after(jiffies, later)) {
+ printk(KERN_ERR
+ "ad1843: AD1843 won't power up\n");
+ return -EIO;
+ }
+ schedule();
+ }
+
+ /* 5. Power up the clock generators and enable clock output pins. */
+ ad1843_write_multi(ad1843, 3,
+ &ad1843_C1EN, 1,
+ &ad1843_C2EN, 1,
+ &ad1843_C3EN, 1);
+
+ /* 6. Configure conversion resources while they are in standby. */
+
+ /* DAC1/2 use clock 1/2 as source, ADC uses clock 3. Always. */
+ ad1843_write_multi(ad1843, 3,
+ &ad1843_DA1C, 1,
+ &ad1843_DA1C, 2,
+ &ad1843_ADLC, 3,
+ &ad1843_ADRC, 3);
+
+ /* 7. Enable conversion resources. */
+ ad1843_write_bits(ad1843, &ad1843_ADTLK, 1);
+ ad1843_write_multi(ad1843, 5,
+ &ad1843_ANAEN, 1,
+ &ad1843_AAMEN, 1,
+ &ad1843_DA1EN, 1,
+ &ad1843_DA2EN, 1,
+ &ad1843_ADLEN, 1,
+ &ad1843_ADREN, 1);
+
+ /* 8. Configure conversion resources while they are enabled. */
+ ad1843_write_bits(ad1843, &ad1843_DA1C, 1);
+ ad1843_write_bits(ad1843, &ad1843_DA2C, 1);
+
+ /* Unmute all channels. */
+
+ ad1843_set_outsrc(ad1843,
+ (SOUND_MASK_PCM | SOUND_MASK_LINE |
+ SOUND_MASK_MIC | SOUND_MASK_CD));
+ ad1843_write_multi(ad1843, 4,
+ &ad1843_LDA1AM, 0,
+ &ad1843_RDA1AM, 0,
+ &ad1843_LDA2AM, 0,
+ &ad1843_RDA2AM, 0);
+
+ /* Set default recording source to Line In and set
+ * mic gain to +20 dB.
+ */
+ ad1843_set_recsrc(ad1843, SOUND_MASK_LINE);
+ ad1843_write_multi(ad1843, 2, &ad1843_LMGE, 1, &ad1843_RMGE, 1);
+
+ /* Set Speaker Out level to +/- 4V and unmute it. */
+ ad1843_write_multi(ad1843, 3,
+ &ad1843_HPOS, 1,
+ &ad1843_HPOM, 0,
+ &ad1843_MPOM, 0);
+
+ return 0;
+}
diff --git a/sound/mips/sgio2audio.c b/sound/mips/sgio2audio.c
new file mode 100644
index 0000000..1ddb59b
--- /dev/null
+++ b/sound/mips/sgio2audio.c
@@ -0,0 +1,789 @@
+/*
+ * Sound driver for Silicon Graphics O2 Workstations A/V board audio.
+ *
+ * Copyright 2003 Vivien Chappelier <vivien.chappelier@linux-mips.org>
+ *
+ * INCOMPLETE:
+ * - finish PCM,
+ * . check why dma_area buffer is not filled correcly
+ * . finish/test 2nd DAC
+ * . recording
+ * - mixer and controls
+ * - /proc interface
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/jiffies.h>
+#include <linux/wait.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/gfp.h>
+#include <linux/vmalloc.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <sound/core.h>
+#include <sound/control.h>
+#include <sound/pcm.h>
+#define SNDRV_GET_ID
+#include <sound/initval.h>
+#include <sound/ad1843.h>
+
+#include <asm/io.h>
+#include <asm/ip32/ip32_ints.h>
+#include <asm/ip32/mace.h>
+
+
+
+MODULE_AUTHOR("Vivien Chappelier <vivien.chappelier@linux-mips.org>");
+MODULE_DESCRIPTION("SGI O2 Audio");
+MODULE_LICENSE("GPL");
+MODULE_SUPPORTED_DEVICE("{{Silicon Graphics, O2 Audio}}");
+
+
+#define SGIO2AUDIO_MAX_VOLUME 1000
+
+#define AUDIO_CONTROL_RESET BIT(0) /* 1: reset audio interface */
+#define AUDIO_CONTROL_CODEC_PRESENT BIT(1) /* 1: codec detected */
+/* 2-8 : channel 1 write ptr alias */
+/* 9-15 : channel 2 read ptr alias */
+/* 16-22 : channel 3 read ptr alias */
+#define AUDIO_CONTROL_VOLUME_BUTTON_UP BIT(23) /* latched volume button */
+#define AUDIO_CONTROL_VOLUME_BUTTON_DOWN BIT(24) /* latched volume button */
+
+#define CODEC_CONTROL_WORD_SHIFT 0
+#define CODEC_CONTROL_WORD_MASK ((1 << 16) - 1)
+#define CODEC_CONTROL_READ BIT(16)
+#define CODEC_CONTROL_ADDRESS_SHIFT 17
+#define CODEC_CONTROL_ADDRESS_MASK ((1 << 7) - 1)
+
+#define CHANNEL_PTR_SHIFT 5
+#define CHANNEL_PTR_MASK ((1 << 6) - 1)
+#define CHANNEL_CONTROL_RESET BIT(10) /* 1: reset channel */
+#define CHANNEL_DMA_ENABLE BIT(9) /* 1: enable DMA transfer */
+#define CHANNEL_INT_THRESHOLD_DISABLED (0 << 5) /* interrupt disabled */
+#define CHANNEL_INT_THRESHOLD_25 (1 << 5) /* int on buffer >25% full */
+#define CHANNEL_INT_THRESHOLD_50 (2 << 5) /* int on buffer >50% full */
+#define CHANNEL_INT_THRESHOLD_75 (3 << 5) /* int on buffer >75% full */
+#define CHANNEL_INT_THRESHOLD_EMPTY (4 << 5) /* int on buffer empty */
+#define CHANNEL_INT_THRESHOLD_NOT_EMPTY (5 << 5) /* int on buffer !empty */
+#define CHANNEL_INT_THRESHOLD_FULL (6 << 5) /* int on buffer empty */
+#define CHANNEL_INT_THRESHOLD_NOT_FULL (7 << 5) /* int on buffer !empty */
+
+#define CHANNEL_IN_BASE (0 << 12)
+#define CHANNEL_OUT1_BASE (1 << 12)
+#define CHANNEL_OUT2_BASE (2 << 12)
+
+#define CHANNEL_RING_SHIFT 12
+#define CHANNEL_RING_SIZE (1 << CHANNEL_RING_SHIFT)
+#define CHANNEL_RING_MASK (CHANNEL_RING_SIZE - 1)
+
+#define CHANNEL_LEFT_SHIFT 40
+#define CHANNEL_RIGHT_SHIFT 8
+
+#define mace_read(r) (sizeof(r) == 4 ? readl(&r) : readq(&r))
+#define mace_write(v,r) (sizeof(r) == 4 ? writel(v,&r) : writeq(v,&r))
+#define mace_perif_audio_read(r) mace_read(mace->perif.audio.r)
+#define mace_perif_audio_write(v,r) mace_write(v,mace->perif.audio.r)
+
+static int enable = 1;
+#ifdef MODULE
+struct sgi_mace *mace;
+#endif
+
+// static int pcm_dev = 1;
+// static int pcm_substreams = 8;
+/*
+MODULE_PARM(enable, "i");
+MODULE_PARM_DESC(enable, "Enable SGI O2 soundcard.");
+MODULE_PARM_SYNTAX(enable, SNDRV_ENABLE_DESC);
+MODULE_PARM(pcm_devs, "i");
+MODULE_PARM_DESC(pcm_devs, "PCM devices # (0-4) for sgio2au driver.");
+MODULE_PARM_SYNTAX(pcm_devs, SNDRV_ENABLED ",allows:{{0,4}},default:1,dialog:list");
+MODULE_PARM(pcm_substreams, "i");
+MODULE_PARM_DESC(pcm_substreams, "PCM substreams # (1-16) for sgio2au driver.");
+MODULE_PARM_SYNTAX(pcm_substreams, SNDRV_ENABLED ",allows:{{1,16}},default:8,dialog:list");
+*/
+static struct snd_card *snd_sgio2audio_card = SNDRV_DEFAULT_PTR1;
+
+/* definition of the chip-specific record */
+typedef struct snd_sgio2audio sgio2audio_t;
+struct snd_sgio2audio {
+ struct snd_card *card;
+
+ struct snd_pcm *pcm;
+
+ /* codec */
+ ad1843_t *ad1843;
+ spinlock_t ad1843_lock;
+
+ /* channels */
+ struct {
+ struct snd_pcm_substream *substream;
+ void * buffer;
+ unsigned int pos;
+ snd_pcm_uframes_t size;
+ spinlock_t lock;
+ } channel[3];
+
+ /* properties */
+ int volume;
+ snd_pcm_format_t format;
+
+ /* resources */
+ void *ring_base;
+ int irq_start;
+ int irq_end;
+};
+#define chip_t sgio2audio_t
+/* TODO: this should be go into <sound/sndmagic.h> */
+#define sgio2audio_t_magic 0xa15a4501
+
+/* PCM hardware definition */
+static struct snd_pcm_hardware snd_sgio2audio_playback_hw = {
+ .info = (SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER),
+ .formats = SNDRV_PCM_FMTBIT_S16_BE,
+ .rates = SNDRV_PCM_RATE_8000_48000,
+ .rate_min = 8000,
+ .rate_max = 48000,
+ .channels_min = 2,
+ .channels_max = 2,
+ .buffer_bytes_max = 65536,
+ .period_bytes_min = 32768,
+ .period_bytes_max = 65536,
+ .periods_min = 1,
+ .periods_max = 1024,
+};
+
+/* AD1843 access */
+
+/*
+ * read_ad1843_reg returns the current contents of a 16 bit AD1843 register.
+ *
+ * Returns unsigned register value on success, -errno on failure.
+ */
+
+static int read_ad1843_reg(void *priv, int reg)
+{
+ sgio2audio_t *chip = (sgio2audio_t *) priv;
+ int val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&chip->ad1843_lock, flags);
+
+ mace_write((reg << CODEC_CONTROL_ADDRESS_SHIFT) |
+ CODEC_CONTROL_READ, mace->perif.audio.codec_control);
+ wmb();
+ val = mace_read(mace->perif.audio.codec_control); /* flush bus */
+ udelay(200);
+
+ val = mace_read(mace->perif.audio.codec_read);
+
+ spin_unlock_irqrestore(&chip->ad1843_lock, flags);
+
+ return val;
+}
+
+/*
+ * write_ad1843_reg writes the specified value to a 16 bit AD1843 register.
+ */
+
+static int write_ad1843_reg(void *priv, int reg, int word)
+{
+ sgio2audio_t *chip = (sgio2audio_t *) priv;
+ int val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&chip->ad1843_lock, flags);
+
+ mace_write((reg << CODEC_CONTROL_ADDRESS_SHIFT) |
+ (word << CODEC_CONTROL_WORD_SHIFT), mace->perif.audio.codec_control);
+ wmb();
+ val = mace_read(mace->perif.audio.codec_control); /* flush bus */
+ udelay(200);
+
+ spin_unlock_irqrestore(&chip->ad1843_lock, flags);
+
+ return(0);
+}
+
+static void dump_ad1843_regs(ad1843_t *ad1843)
+{
+ int i;
+
+ printk(KERN_DEBUG "sgio2audio: AD1843 register dump\n");
+ for(i = 0; i < 32; i++)
+ printk(KERN_DEBUG "sgio2audio: 0x%02x: %04x\n",
+ i, ad1843->read(ad1843->chip, i));
+}
+
+static ad1843_t ad1843_ops = {
+ NULL, /* initialized in snd_sgio2_audio_create */
+ read_ad1843_reg,
+ write_ad1843_reg,
+};
+
+/* low-level audio interface DMA */
+
+/* put some DMA data in bounce buffer, count must be a multiple of 32 */
+/* returns 1 if a period has elapsed */
+static int snd_sgio2audio_dma_push_frag(sgio2audio_t *chip,
+ unsigned int channel,
+ unsigned int count)
+{
+ int ret;
+ s64 l, r;
+ unsigned long dst_base, dst_pos;
+ unsigned long src_base, src_pos, src_mask;
+ u64 *dst;
+ s16 *src;
+ unsigned long flags;
+ struct snd_pcm_runtime *runtime = chip->channel[channel].substream->runtime;
+
+ spin_lock_irqsave(&chip->channel[channel].lock, flags);
+
+ dst_base = (unsigned long) chip->ring_base | (channel << CHANNEL_RING_SHIFT);
+ dst_pos = (unsigned long) mace_read(mace->perif.audio.chan[channel].write_ptr);
+ src_base = (unsigned long) chip->channel[channel].buffer;
+ src_pos = (unsigned long) chip->channel[channel].pos;
+ src_mask = frames_to_bytes(runtime, runtime->buffer_size) - 1;
+
+ /* check if a period has elapsed */
+ chip->channel[channel].size += (count >> 3); /* in frames */
+ ret = chip->channel[channel].size >= runtime->period_size;
+ chip->channel[channel].size %= runtime->period_size;
+
+ while (count) {
+#if 1
+ src = (s16 *)(src_base + src_pos);
+ dst = (u64 *)(dst_base + dst_pos);
+
+ l = src[0]; /* sign extend */
+ r = src[1]; /* sign extend */
+
+ *dst = ((l & 0x00ffffff) << CHANNEL_LEFT_SHIFT) |
+ ((r & 0x00ffffff) << CHANNEL_RIGHT_SHIFT);
+
+ dst_pos = (dst_pos + sizeof(u64)) & CHANNEL_RING_MASK;
+ src_pos = (src_pos + 2 * sizeof(s16)) & src_mask;
+#else
+ dst = (u64 *)(dst_base + dst_pos);
+ src = (u32 *)(src_base + src_pos);
+ *dst = ((u64)src[0] << 40) | ((u64)src[1] << 8);
+ dst_pos = (dst_pos + sizeof(u64)) & CHANNEL_RING_MASK;
+ src_pos = (src_pos + sizeof(u64)) & src_mask;
+#endif
+ count -= sizeof(u64);
+ }
+
+ mace_write(dst_pos, mace->perif.audio.chan[channel].write_ptr); /* in bytes */
+ chip->channel[channel].pos = src_pos;
+
+ spin_unlock_irqrestore(&chip->channel[channel].lock, flags);
+
+ return ret;
+}
+
+static int snd_sgio2audio_dma_start(struct snd_pcm_substream *substream)
+{
+ sgio2audio_t *chip = snd_pcm_substream_chip(substream);
+ unsigned int index = 1 + substream->number;
+
+ /* reset DMA channel */
+ mace_write(CHANNEL_CONTROL_RESET, mace->perif.audio.chan[index].control);
+ udelay(10);
+ mace_write(0, mace->perif.audio.chan[index].control);
+
+ /* push a full buffer */
+ snd_sgio2audio_dma_push_frag(chip, index, CHANNEL_RING_SIZE - 32);
+
+ /* set DMA to wake on 50% empty and enable interrupt */
+ mace_write(CHANNEL_DMA_ENABLE |
+ CHANNEL_INT_THRESHOLD_50,
+ mace->perif.audio.chan[index].control);
+ return(0);
+}
+
+static int snd_sgio2audio_dma_stop(struct snd_pcm_substream *substream)
+{
+ //sgio2audio_t *chip = snd_pcm_substream_chip(substream);
+ unsigned int index = 1 + substream->number;
+
+ mace_write(0, mace->perif.audio.chan[index].control);
+
+ return(0);
+}
+
+static void snd_sgio2audio_dma_interrupt(struct snd_sgio2audio *chip,
+ int index)
+{
+ struct snd_pcm_substream *substream = chip->channel[index].substream;
+ int count;
+
+ /* fill the ring */
+ count = CHANNEL_RING_SIZE - mace_read(mace->perif.audio.chan[index].depth) - 32;
+ if (snd_sgio2audio_dma_push_frag(chip, index, count))
+ snd_pcm_period_elapsed(substream);
+}
+
+static irqreturn_t snd_sgio2audio_interrupt(int irq, void *dev_id)
+{
+ struct snd_sgio2audio *chip = dev_id;
+ unsigned long status;
+
+ switch(irq) {
+ /* volume changed */
+ case MACEISA_AUDIO_SC_IRQ:
+ status = mace_read(mace->perif.audio.control);
+ if(status & AUDIO_CONTROL_VOLUME_BUTTON_UP) {
+ status &= ~AUDIO_CONTROL_VOLUME_BUTTON_UP;
+ mace_write(status, mace->perif.audio.control);
+ if(chip->volume < SGIO2AUDIO_MAX_VOLUME) chip->volume++;
+ }
+ if(status & AUDIO_CONTROL_VOLUME_BUTTON_DOWN) {
+ status &= ~AUDIO_CONTROL_VOLUME_BUTTON_DOWN;
+ mace_write(status, mace->perif.audio.control);
+ if(chip->volume > 0) chip->volume--;
+ }
+
+ /* program AD1843 with the new volume */
+ ad1843_set_gain(chip->ad1843, AD1843_GAIN_PCM_0, chip->volume / 10);
+ ad1843_set_gain(chip->ad1843, AD1843_GAIN_PCM_1, chip->volume / 10);
+ break;
+
+ /* dma ring ready */
+ case MACEISA_AUDIO1_DMAT_IRQ:
+ snd_sgio2audio_dma_interrupt(chip, 0);
+ break;
+ case MACEISA_AUDIO2_DMAT_IRQ:
+ snd_sgio2audio_dma_interrupt(chip, 1);
+ break;
+ case MACEISA_AUDIO3_DMAT_IRQ:
+ snd_sgio2audio_dma_interrupt(chip, 2);
+ break;
+
+ default:
+ printk(KERN_ERR "sgio2audio: unhandled interrupt %d\n", irq);
+ // TEMP : stop DMA
+ mace_write(0, mace->perif.audio.chan[0].control);
+ mace_write(0, mace->perif.audio.chan[1].control);
+ mace_write(0, mace->perif.audio.chan[2].control);
+ break;
+ }
+ return IRQ_HANDLED;
+}
+
+/* PCM part */
+
+/* PCM playback open callback */
+static int snd_sgio2audio_playback_open(struct snd_pcm_substream *substream)
+{
+ // sgio2audio_t *chip = snd_pcm_substream_chip(substream);
+ struct snd_pcm_runtime *runtime = substream->runtime;
+
+ runtime->hw = snd_sgio2audio_playback_hw;
+
+ return 0;
+}
+
+/* PCM playback close callback */
+static int snd_sgio2audio_playback_close(struct snd_pcm_substream *substream)
+{
+ //sgio2audio_t *chip = snd_pcm_substream_chip(substream);
+
+ /* TODO: hardware code */
+ return 0;
+}
+
+/* PCM capture open callback */
+static int snd_sgio2audio_capture_open(struct snd_pcm_substream *substream)
+{
+ sgio2audio_t *chip = snd_pcm_substream_chip(substream);
+ struct snd_pcm_runtime *runtime = substream->runtime;
+
+ runtime->hw = snd_sgio2audio_playback_hw;
+
+ /* initialize AD1843 */
+ ad1843_init(chip->ad1843);
+
+ return 0;
+}
+
+/* PCM capture close callback */
+static int snd_sgio2audio_capture_close(struct snd_pcm_substream *substream)
+{
+ return 0;
+}
+
+
+/* hw_params callback */
+static int snd_sgio2audio_pcm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *hw_params)
+{
+ //sgio2audio_t *chip = snd_pcm_substream_chip(substream);
+ // unsigned long flags;
+ // int ret;
+ // static int count = 0;
+
+ /* alloc virtual 'dma' area */
+ if(substream->runtime->dma_area != NULL)
+ vfree(substream->runtime->dma_area);
+ substream->runtime->dma_area = vmalloc(params_buffer_bytes(hw_params));
+ if(substream->runtime->dma_area == NULL)
+ return -ENOMEM;
+ return 0;
+}
+
+/* hw_free callback */
+static int snd_sgio2audio_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+ if(substream->runtime->dma_area != NULL)
+ vfree(substream->runtime->dma_area);
+ substream->runtime->dma_area = NULL;
+ return 0;
+}
+
+/* prepare callback */
+static int snd_sgio2audio_pcm_prepare(struct snd_pcm_substream *substream)
+{
+ sgio2audio_t *chip = snd_pcm_substream_chip(substream);
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ unsigned int index = 1 + substream->number;
+ unsigned long flags;
+
+ spin_lock_irqsave(&chip->channel[index].lock, flags);
+
+ /* Setup the pseudo-dma transfer pointers. */
+ chip->channel[index].buffer = runtime->dma_area;
+ chip->channel[index].pos = 0;
+ chip->channel[index].size = 0;
+ chip->channel[index].substream = substream;
+
+ /* set AD1843 format */
+ /* hardware format is always S16_LE */
+ if (index) {
+ /* playback */
+ ad1843_setup_dac(chip->ad1843,
+ index - 1,
+ runtime->rate,
+ SNDRV_PCM_FORMAT_S16_LE,
+ runtime->channels);
+ } else {
+ /* capture */
+ ad1843_setup_adc(chip->ad1843,
+ runtime->rate,
+ SNDRV_PCM_FORMAT_S16_LE,
+ runtime->channels);
+ }
+
+ spin_unlock_irqrestore(&chip->channel[index].lock, flags);
+
+ return 0;
+}
+
+/* trigger callback */
+static int snd_sgio2audio_pcm_trigger(struct snd_pcm_substream *substream,
+ int cmd)
+{
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ /* start the PCM engine */
+ snd_sgio2audio_dma_start(substream);
+ break;
+ case SNDRV_PCM_TRIGGER_STOP:
+ /* stop the PCM engine */
+ snd_sgio2audio_dma_stop(substream);
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/* pointer callback */
+static snd_pcm_uframes_t
+snd_sgio2audio_pcm_pointer(struct snd_pcm_substream *substream)
+{
+ sgio2audio_t *chip = snd_pcm_substream_chip(substream);
+ unsigned int index = 1 + substream->number;
+ snd_pcm_uframes_t current_ptr;
+
+ /* get the current hardware pointer */
+ current_ptr = bytes_to_frames(substream->runtime,
+ chip->channel[index].pos);
+
+ return current_ptr;
+}
+
+/* get the physical page pointer on the given offset */
+static struct page *snd_sgio2audio_page(struct snd_pcm_substream *substream,
+ unsigned long offset)
+{
+ void *pageptr = substream->runtime->dma_area + offset;
+ return vmalloc_to_page(pageptr);
+}
+
+/* operators */
+static struct snd_pcm_ops snd_sgio2audio_playback_ops = {
+ .open = snd_sgio2audio_playback_open,
+ .close = snd_sgio2audio_playback_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = snd_sgio2audio_pcm_hw_params,
+ .hw_free = snd_sgio2audio_pcm_hw_free,
+ .prepare = snd_sgio2audio_pcm_prepare,
+ .trigger = snd_sgio2audio_pcm_trigger,
+ .pointer = snd_sgio2audio_pcm_pointer,
+ .page = snd_sgio2audio_page,
+};
+
+static struct snd_pcm_ops snd_sgio2audio_capture_ops = {
+ .open = snd_sgio2audio_capture_open,
+ .close = snd_sgio2audio_capture_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = snd_sgio2audio_pcm_hw_params,
+ .hw_free = snd_sgio2audio_pcm_hw_free,
+ .prepare = snd_sgio2audio_pcm_prepare,
+ .trigger = snd_sgio2audio_pcm_trigger,
+ .pointer = snd_sgio2audio_pcm_pointer,
+ .page = snd_sgio2audio_page,
+};
+
+/*
+ * definitions of capture are omitted here...
+ */
+
+/* create a pcm device */
+static int __devinit snd_sgio2audio_new_pcm(sgio2audio_t *chip)
+{
+ struct snd_pcm *pcm;
+ int err;
+
+ /* create a new pcm device with two outputs and one input */
+ if ((err = snd_pcm_new(chip->card, "SGI O2 Audio", 0, 2, 1,
+ &pcm)) < 0){
+ printk("sgio2audio: failed to create PCM devices\n");
+ return err;
+ }
+ else{
+ printk("sgio2audio: PCM devices created\n");
+ }
+
+ pcm->private_data = chip;
+ strcpy(pcm->name, "SGI O2 Audio");
+ chip->pcm = pcm;
+
+ /* set operators */
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
+ &snd_sgio2audio_playback_ops);
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE,
+ &snd_sgio2audio_capture_ops);
+
+ return 0;
+}
+
+/* ALSA driver */
+
+static int snd_sgio2audio_free(sgio2audio_t *chip)
+{
+ int irq;
+
+ /* reset interface */
+ mace_write(AUDIO_CONTROL_RESET, mace->perif.audio.control);
+ udelay(1);
+ mace_write(0, mace->perif.audio.control);
+
+ /* release IRQ's */
+ for (irq = MACEISA_AUDIO_SW_IRQ; irq <= MACEISA_AUDIO3_MERR_IRQ; irq++)
+ {
+ free_irq(irq, (void *)chip);
+ printk("sgio2audio: irq %d is now free\n",irq);
+ }
+
+ /* release card data */
+ kfree(chip);
+ printk("sgio2audio: device ressources are now free\n");
+
+ return(0);
+}
+
+static int snd_sgio2audio_dev_free(struct snd_device *device)
+{
+// sgio2audio_t *chip = snd_magic_cast(sgio2audio_t,
+// device->device_data, return -ENXIO);
+ sgio2audio_t *chip = device->device_data;
+ /* TODO: component destructor */
+ return snd_sgio2audio_free(chip);
+}
+
+static struct snd_device_ops ops = {
+ .dev_free = snd_sgio2audio_dev_free,
+};
+
+static int __devinit snd_sgio2audio_create(struct snd_card *card,
+ sgio2audio_t **rchip)
+{
+ sgio2audio_t *chip;
+ int err, irq, index;
+ dma_addr_t ring_base_dma;
+
+ *rchip = NULL;
+
+ /* allocate a chip-specific data with magic-alloc */
+ chip = kcalloc(1,sizeof(sgio2audio_t), GFP_KERNEL);
+ if (chip == NULL)
+ return -ENOMEM;
+
+ chip->card = card;
+ chip->irq_start = MACEISA_AUDIO_SW_IRQ;
+ chip->irq_end = MACEISA_AUDIO3_MERR_IRQ;
+
+ chip->ring_base = dma_alloc_coherent(NULL, MACEISA_RINGBUFFERS_SIZE,
+ &ring_base_dma, GFP_USER);
+ if (chip->ring_base == NULL) {
+ printk(KERN_ERR "sgio2audio: could not allocate ring buffers\n");
+ return -ENOMEM;
+ }
+
+ spin_lock_init(&chip->ad1843_lock);
+
+ chip->volume = SGIO2AUDIO_MAX_VOLUME;
+
+ /* initialize channels */
+ for (index = 0; index < 3; index++) {
+ spin_lock_init(&chip->channel[index].lock);
+ chip->channel[index].substream = NULL;
+ chip->channel[index].buffer = NULL;
+ chip->channel[index].pos = 0;
+ chip->channel[index].size = 0;
+ }
+
+ /* allocate IRQs */
+ for (irq = chip->irq_start; irq <= chip->irq_end; irq++) {
+ if (request_irq(irq, snd_sgio2audio_interrupt,
+ IRQF_SHARED, "SGI O2 Audio",
+ (void *)chip)) {
+ snd_sgio2audio_free(chip);
+ printk(KERN_ERR "sgio2audio: cannot allocate irq %d\n", irq);
+ return -EBUSY;
+ }
+ }
+
+ /* check if a codec is attached to the interface */
+ /* (Audio or Audio/Video board present) */
+ if (!(mace_read(mace->perif.audio.control) & AUDIO_CONTROL_CODEC_PRESENT))
+ return -ENOENT;
+
+ /* reset the interface */
+ mace_write(AUDIO_CONTROL_RESET, mace->perif.audio.control);
+ udelay(1);
+ mace_write(0, mace->perif.audio.control);
+
+ /* set ring base; this assumes serial doesn't use DMA */
+ //mace_perif_ctrl_write(virt_to_bus(chip->ring_base), ringbase);
+ mace_write(ring_base_dma, mace->perif.ctrl.ringbase);
+
+ /* attach the AD1843 codec */
+ chip->ad1843 = &ad1843_ops;
+ chip->ad1843->chip = (void *) chip;
+
+ /* initialize the AD1843 codec */
+ if ((err = ad1843_init(chip->ad1843)) < 0) {
+ snd_sgio2audio_free(chip);
+ return err;
+ }
+
+ if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL,
+ chip, &ops)) < 0) {
+ snd_sgio2audio_free(chip);
+ return err;
+ }
+ *rchip = chip;
+ printk("sgio2audio: AD1843 initialized\n");
+ return 0;
+}
+
+static int __devinit snd_sgio2audio_probe(void)
+{
+ struct snd_card *card;
+ sgio2audio_t *chip;
+ int err;
+
+ if (!enable)
+ return -ENOENT;
+#ifdef MODULE
+ mace = ioremap(MACE_BASE, sizeof(struct sgi_mace));
+#endif
+
+ card = snd_card_new(0, 0, THIS_MODULE, 0);
+ printk("MACE_BASE=%lX - mace=%lX\n",(unsigned long)MACE_BASE,(unsigned long)mace);
+ if (card == NULL)
+ return -ENOMEM;
+
+ if ((err = snd_sgio2audio_create(card, &chip)) < 0) {
+ snd_card_free(card);
+ return err;
+ }
+
+ /* TODO : finish PCM, do mixer and /proc */
+ if ((err = snd_sgio2audio_new_pcm(chip)) < 0) {
+ snd_card_free(card);
+ return err;
+ }
+
+ strcpy(card->driver, "SGI O2 Audio Driver");
+ strcpy(card->shortname, "SGI O2 Audio");
+ sprintf(card->longname, "%s irq %i-%i",
+ card->shortname,
+ chip->irq_start, chip->irq_end);
+
+ if ((err = snd_card_register(card)) < 0) {
+ snd_card_free(card);
+ return err;
+ }
+
+ snd_sgio2audio_card = card;
+ printk("sgio2audio: SGI O2 AD1843 detected\n");
+
+ return 0;
+}
+
+/* initialization of the module */
+static int __init alsa_card_sgio2audio_init(void)
+{
+ int err;
+
+ if ((err = snd_sgio2audio_probe()) < 0) {
+#ifdef MODULE
+ printk(KERN_ERR "SGI O2 Audio not found "
+ "or device busy\n");
+#endif
+ return err;
+ }
+ return 0;
+}
+
+/* clean up the module */
+static void __exit alsa_card_sgio2audio_exit(void)
+{
+ snd_card_free(snd_sgio2audio_card);
+}
+
+module_init(alsa_card_sgio2audio_init)
+module_exit(alsa_card_sgio2audio_exit)
--
Crap can work. Given enough thrust pigs will fly, but it's not necessary a
good idea. [ RFC1925, 2.3 ]
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: SGI O2 sound driver
2008-06-28 0:09 SGI O2 sound driver Thomas Bogendoerfer
@ 2008-06-28 14:13 ` Thomas Bogendoerfer
2008-06-28 22:45 ` Thomas Bogendoerfer
0 siblings, 1 reply; 8+ messages in thread
From: Thomas Bogendoerfer @ 2008-06-28 14:13 UTC (permalink / raw)
To: linux-mips
On Sat, Jun 28, 2008 at 02:09:16AM +0200, Thomas Bogendoerfer wrote:
> the dma ring buffer instead of using get_free_pages(). The driver
> is still missing cleanups and features.
v2 is now checkpatch clean and I switched over to use a platform device.
The next step is now to get capture and 2nd playback going.
Thomas.
arch/mips/sgi-ip32/ip32-platform.c | 18 +
include/sound/ad1843.h | 47 +++
sound/mips/Kconfig | 6 +
sound/mips/Makefile | 2 +
sound/mips/ad1843.c | 644 ++++++++++++++++++++++++++++++++
sound/mips/sgio2audio.c | 714 ++++++++++++++++++++++++++++++++++++
6 files changed, 1431 insertions(+), 0 deletions(-)
diff --git a/arch/mips/sgi-ip32/ip32-platform.c b/arch/mips/sgi-ip32/ip32-platform.c
index 89a71f4..8b624b9 100644
--- a/arch/mips/sgi-ip32/ip32-platform.c
+++ b/arch/mips/sgi-ip32/ip32-platform.c
@@ -65,6 +65,24 @@ static __init int meth_devinit(void)
device_initcall(meth_devinit);
+static __init int sgio2audio_devinit(void)
+{
+ struct platform_device *pd;
+ int ret;
+
+ pd = platform_device_alloc("sgio2audio", -1);
+ if (!pd)
+ return -ENOMEM;
+
+ ret = platform_device_add(pd);
+ if (ret)
+ platform_device_put(pd);
+
+ return ret;
+}
+
+device_initcall(sgio2audio_devinit);
+
MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("8250 UART probe driver for SGI IP32 aka O2");
diff --git a/include/sound/ad1843.h b/include/sound/ad1843.h
new file mode 100644
index 0000000..492d10c
--- /dev/null
+++ b/include/sound/ad1843.h
@@ -0,0 +1,47 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright 2003 Vivien Chappelier <vivien.chappelier@linux-mips.org>
+ */
+
+#ifndef __SOUND_AD1843_H
+#define __SOUND_AD1843_H
+
+struct snd_ad1843 {
+ void *chip;
+ int (*read)(void *chip, int reg);
+ int (*write)(void *chip, int reg, int val);
+};
+
+#define AD1843_GAIN_RECLEV 0
+#define AD1843_GAIN_LINE 1
+#define AD1843_GAIN_CD 2
+#define AD1843_GAIN_MIC 3
+#define AD1843_GAIN_PCM_0 4
+#define AD1843_GAIN_PCM_1 5
+#define AD1843_GAIN_SIZE (AD1843_GAIN_PCM_1+1)
+
+int ad1843_get_gain(struct snd_ad1843 *ad1843, int id);
+int ad1843_set_gain(struct snd_ad1843 *ad1843, int id, int newval);
+int ad1843_get_recsrc(struct snd_ad1843 *ad1843);
+void ad1843_set_resample_mode(struct snd_ad1843 *ad1843, int onoff);
+int ad1843_set_recsrc(struct snd_ad1843 *ad1843, int newsrc);
+int ad1843_get_outsrc(struct snd_ad1843 *ad1843);
+int ad1843_set_outsrc(struct snd_ad1843 *ad1843, int mask);
+void ad1843_setup_dac(struct snd_ad1843 *ad1843,
+ unsigned int id,
+ unsigned int framerate,
+ snd_pcm_format_t fmt,
+ unsigned int channels);
+void ad1843_shutdown_dac(struct snd_ad1843 *ad1843,
+ unsigned int id);
+void ad1843_setup_adc(struct snd_ad1843 *ad1843,
+ unsigned int framerate,
+ snd_pcm_format_t fmt,
+ unsigned int channels);
+void ad1843_shutdown_adc(struct snd_ad1843 *ad1843);
+int ad1843_init(struct snd_ad1843 *ad1843);
+
+#endif /* __SOUND_AD1843_H */
diff --git a/sound/mips/Kconfig b/sound/mips/Kconfig
index 531f8ba..a3e202e 100644
--- a/sound/mips/Kconfig
+++ b/sound/mips/Kconfig
@@ -11,5 +11,11 @@ config SND_AU1X00
help
ALSA Sound driver for the Au1x00's AC97 port.
+config SND_SGI_O2
+ tristate "SGI O2 Audio"
+ depends on SND && SGI_IP32
+ help
+ Sound support for the SGI O2 Workstation.
+
endmenu
diff --git a/sound/mips/Makefile b/sound/mips/Makefile
index 47afed9..55624d8 100644
--- a/sound/mips/Makefile
+++ b/sound/mips/Makefile
@@ -2,7 +2,9 @@
# Makefile for ALSA
#
+snd-sgi-o2-objs := sgio2audio.o ad1843.o
snd-au1x00-objs := au1x00.o
# Toplevel Module Dependency
obj-$(CONFIG_SND_AU1X00) += snd-au1x00.o
+obj-$(CONFIG_SND_SGI_O2) += snd-sgi-o2.o
diff --git a/sound/mips/ad1843.c b/sound/mips/ad1843.c
new file mode 100644
index 0000000..fca21d2
--- /dev/null
+++ b/sound/mips/ad1843.c
@@ -0,0 +1,644 @@
+/*
+ * AD1843 low level driver
+ *
+ * Copyright 2003 Vivien Chappelier <vivien.chappelier@linux-mips.org>
+ *
+ * inspired from vwsnd.c (SGI VW audio driver)
+ * Copyright 1999 Silicon Graphics, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/slab.h>
+
+#include <linux/init.h>
+#include <linux/jiffies.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/initval.h>
+#include <sound/ad1843.h>
+
+/* TEMP: OSS stuff */
+#include <linux/soundcard.h>
+
+/*
+ * AD1843 bitfield definitions. All are named as in the AD1843 data
+ * sheet, with ad1843_ prepended and individual bit numbers removed.
+ *
+ * E.g., bits LSS0 through LSS2 become ad1843_LSS.
+ *
+ * Only the bitfields we need are defined.
+ */
+
+struct ad1843_bitfield {
+ char reg;
+ char lo_bit;
+ char nbits;
+};
+
+static const struct ad1843_bitfield
+ ad1843_PDNO = { 0, 14, 1 }, /* Converter Power-Down Flag */
+ ad1843_INIT = { 0, 15, 1 }, /* Clock Initialization Flag */
+ ad1843_RIG = { 2, 0, 4 }, /* Right ADC Input Gain */
+ ad1843_RMGE = { 2, 4, 1 }, /* Right ADC Mic Gain Enable */
+ ad1843_RSS = { 2, 5, 3 }, /* Right ADC Source Select */
+ ad1843_LIG = { 2, 8, 4 }, /* Left ADC Input Gain */
+ ad1843_LMGE = { 2, 12, 1 }, /* Left ADC Mic Gain Enable */
+ ad1843_LSS = { 2, 13, 3 }, /* Left ADC Source Select */
+ ad1843_RX1M = { 4, 0, 5 }, /* Right Aux 1 Mix Gain/Atten */
+ ad1843_RX1MM = { 4, 7, 1 }, /* Right Aux 1 Mix Mute */
+ ad1843_LX1M = { 4, 8, 5 }, /* Left Aux 1 Mix Gain/Atten */
+ ad1843_LX1MM = { 4, 15, 1 }, /* Left Aux 1 Mix Mute */
+ ad1843_RX2M = { 5, 0, 5 }, /* Right Aux 2 Mix Gain/Atten */
+ ad1843_RX2MM = { 5, 7, 1 }, /* Right Aux 2 Mix Mute */
+ ad1843_LX2M = { 5, 8, 5 }, /* Left Aux 2 Mix Gain/Atten */
+ ad1843_LX2MM = { 5, 15, 1 }, /* Left Aux 2 Mix Mute */
+ ad1843_RMCM = { 7, 0, 5 }, /* Right Mic Mix Gain/Atten */
+ ad1843_RMCMM = { 7, 7, 1 }, /* Right Mic Mix Mute */
+ ad1843_LMCM = { 7, 8, 5 }, /* Left Mic Mix Gain/Atten */
+ ad1843_LMCMM = { 7, 15, 1 }, /* Left Mic Mix Mute */
+ ad1843_HPOS = { 8, 4, 1 }, /* Headphone Output Voltage Swing */
+ ad1843_HPOM = { 8, 5, 1 }, /* Headphone Output Mute */
+ ad1843_MPOM = { 8, 6, 1 }, /* Mono Output Mute */
+ ad1843_RDA1G = { 9, 0, 6 }, /* Right DAC1 Analog/Digital Gain */
+ ad1843_RDA1GM = { 9, 7, 1 }, /* Right DAC1 Analog Mute */
+ ad1843_LDA1G = { 9, 8, 6 }, /* Left DAC1 Analog/Digital Gain */
+ ad1843_LDA1GM = { 9, 15, 1 }, /* Left DAC1 Analog Mute */
+ ad1843_RDA2G = { 9, 0, 6 }, /* Right DAC2 Analog/Digital Gain */
+ ad1843_RDA2GM = { 9, 7, 1 }, /* Right DAC2 Analog Mute */
+ ad1843_LDA2G = { 9, 8, 6 }, /* Left DAC2 Analog/Digital Gain */
+ ad1843_LDA2GM = { 9, 15, 1 }, /* Left DAC2 Analog Mute */
+ ad1843_RDA1AM = { 11, 7, 1 }, /* Right DAC1 Digital Mute */
+ ad1843_LDA1AM = { 11, 15, 1 }, /* Left DAC1 Digital Mute */
+ ad1843_RDA2AM = { 11, 7, 1 }, /* Right DAC1 Digital Mute */
+ ad1843_LDA2AM = { 11, 15, 1 }, /* Left DAC1 Digital Mute */
+ ad1843_ADLC = { 15, 0, 2 }, /* ADC Left Sample Rate Source */
+ ad1843_ADRC = { 15, 2, 2 }, /* ADC Right Sample Rate Source */
+ ad1843_DA1C = { 15, 8, 2 }, /* DAC1 Sample Rate Source */
+ ad1843_DA2C = { 15, 10, 2 }, /* DAC2 Sample Rate Source */
+ ad1843_C1C = { 17, 0, 16 }, /* Clock 1 Sample Rate Select */
+ ad1843_C2C = { 20, 0, 16 }, /* Clock 2 Sample Rate Select */
+ ad1843_C3C = { 23, 0, 16 }, /* Clock 3 Sample Rate Select */
+ ad1843_DAADL = { 25, 4, 2 }, /* Digital ADC Left Source Select */
+ ad1843_DAADR = { 25, 6, 2 }, /* Digital ADC Right Source Select */
+ ad1843_DRSFLT = { 25, 15, 1 }, /* Digital Reampler Filter Mode */
+ ad1843_ADLF = { 26, 0, 2 }, /* ADC Left Channel Data Format */
+ ad1843_ADRF = { 26, 2, 2 }, /* ADC Right Channel Data Format */
+ ad1843_ADTLK = { 26, 4, 1 }, /* ADC Transmit Lock Mode Select */
+ ad1843_SCF = { 26, 7, 1 }, /* SCLK Frequency Select */
+ ad1843_DA1F = { 26, 8, 2 }, /* DAC1 Data Format Select */
+ ad1843_DA2F = { 26, 10, 2 }, /* DAC2 Data Format Select */
+ ad1843_DA1SM = { 26, 14, 1 }, /* DAC1 Stereo/Mono Mode Select */
+ ad1843_DA2SM = { 26, 15, 1 }, /* DAC2 Stereo/Mono Mode Select */
+ ad1843_ADLEN = { 27, 0, 1 }, /* ADC Left Channel Enable */
+ ad1843_ADREN = { 27, 1, 1 }, /* ADC Right Channel Enable */
+ ad1843_AAMEN = { 27, 4, 1 }, /* Analog to Analog Mix Enable */
+ ad1843_ANAEN = { 27, 7, 1 }, /* Analog Channel Enable */
+ ad1843_DA1EN = { 27, 8, 1 }, /* DAC1 Enable */
+ ad1843_DA2EN = { 27, 9, 1 }, /* DAC2 Enable */
+ ad1843_C1EN = { 28, 11, 1 }, /* Clock Generator 1 Enable */
+ ad1843_C2EN = { 28, 12, 1 }, /* Clock Generator 2 Enable */
+ ad1843_C3EN = { 28, 13, 1 }, /* Clock Generator 3 Enable */
+ ad1843_PDNI = { 28, 15, 1 }; /* Converter Power Down */
+
+/*
+ * The various registers of the AD1843 use three different formats for
+ * specifying gain. The ad1843_gain structure parameterizes the
+ * formats.
+ */
+
+struct ad1843_gain {
+ int negative; /* nonzero if gain is negative. */
+ const struct ad1843_bitfield *lfield;
+ const struct ad1843_bitfield *rfield;
+};
+
+const struct ad1843_gain ad1843_gain_RECLEV = {
+ 0, &ad1843_LIG, &ad1843_RIG
+};
+const struct ad1843_gain ad1843_gain_LINE = {
+ 1, &ad1843_LX1M, &ad1843_RX1M
+};
+const struct ad1843_gain ad1843_gain_CD = {
+ 1, &ad1843_LX2M, &ad1843_RX2M
+};
+const struct ad1843_gain ad1843_gain_MIC = {
+ 1, &ad1843_LMCM, &ad1843_RMCM
+};
+const struct ad1843_gain ad1843_gain_PCM_0 = {
+ 1, &ad1843_LDA1G, &ad1843_RDA1G
+};
+const struct ad1843_gain ad1843_gain_PCM_1 = {
+ 1, &ad1843_LDA2G, &ad1843_RDA2G
+};
+
+const struct ad1843_gain *ad1843_gain[AD1843_GAIN_SIZE] =
+{
+ &ad1843_gain_RECLEV,
+ &ad1843_gain_LINE,
+ &ad1843_gain_CD,
+ &ad1843_gain_MIC,
+ &ad1843_gain_PCM_0,
+ &ad1843_gain_PCM_1,
+};
+
+/* read the current value of an AD1843 bitfield. */
+
+static int ad1843_read_bits(struct snd_ad1843 *ad1843,
+ const struct ad1843_bitfield *field)
+{
+ int w = ad1843->read(ad1843->chip, field->reg);
+ int val = w >> field->lo_bit & ((1 << field->nbits) - 1);
+
+ return val;
+}
+
+/*
+ * write a new value to an AD1843 bitfield and return the old value.
+ */
+
+static int ad1843_write_bits(struct snd_ad1843 *ad1843,
+ const struct ad1843_bitfield *field,
+ int newval)
+{
+ int w = ad1843->read(ad1843->chip, field->reg);
+ int mask = ((1 << field->nbits) - 1) << field->lo_bit;
+ int oldval = (w & mask) >> field->lo_bit;
+ int newbits = (newval << field->lo_bit) & mask;
+ w = (w & ~mask) | newbits;
+ (void) ad1843->write(ad1843->chip, field->reg, w);
+
+ return oldval;
+}
+
+/*
+ * ad1843_read_multi reads multiple bitfields from the same AD1843
+ * register. It uses a single read cycle to do it. (Reading the
+ * ad1843 requires 256 bit times at 12.288 MHz, or nearly 20
+ * microseconds.)
+ *
+ * Called like this.
+ *
+ * ad1843_read_multi(ad1843, nfields,
+ * &ad1843_FIELD1, &val1,
+ * &ad1843_FIELD2, &val2, ...);
+ */
+
+static void ad1843_read_multi(struct snd_ad1843 *ad1843, int argcount, ...)
+{
+ va_list ap;
+ const struct ad1843_bitfield *fp;
+ int w = 0, mask, *value, reg = -1;
+
+ va_start(ap, argcount);
+ while (--argcount >= 0) {
+ fp = va_arg(ap, const struct ad1843_bitfield *);
+ value = va_arg(ap, int *);
+ if (reg == -1) {
+ reg = fp->reg;
+ w = ad1843->read(ad1843->chip, reg);
+ }
+
+ mask = (1 << fp->nbits) - 1;
+ *value = w >> fp->lo_bit & mask;
+ }
+ va_end(ap);
+}
+
+/*
+ * ad1843_write_multi stores multiple bitfields into the same AD1843
+ * register. It uses one read and one write cycle to do it.
+ *
+ * Called like this.
+ *
+ * ad1843_write_multi(ad1843, nfields,
+ * &ad1843_FIELD1, val1,
+ * &ad1843_FIELF2, val2, ...);
+ */
+
+static void ad1843_write_multi(struct snd_ad1843 *ad1843, int argcount, ...)
+{
+ va_list ap;
+ int reg;
+ const struct ad1843_bitfield *fp;
+ int value;
+ int w, m, mask, bits;
+
+ mask = 0;
+ bits = 0;
+ reg = -1;
+
+ va_start(ap, argcount);
+ while (--argcount >= 0) {
+ fp = va_arg(ap, const struct ad1843_bitfield *);
+ value = va_arg(ap, int);
+ if (reg == -1)
+ reg = fp->reg;
+
+ m = ((1 << fp->nbits) - 1) << fp->lo_bit;
+ mask |= m;
+ bits |= (value << fp->lo_bit) & m;
+ }
+ va_end(ap);
+
+ if (~mask & 0xFFFF)
+ w = ad1843->read(ad1843->chip, reg);
+ else
+ w = 0;
+ w = (w & ~mask) | bits;
+ (void) ad1843->write(ad1843->chip, reg, w);
+}
+
+/*
+ * ad1843_get_gain reads the specified register and extracts the gain value
+ * using the supplied gain type. It returns the gain in OSS format.
+ */
+
+int ad1843_get_gain(struct snd_ad1843 *ad1843, int id)
+{
+ int lg, rg;
+ const struct ad1843_gain *gp = ad1843_gain[id];
+ unsigned short mask = (1 << gp->lfield->nbits) - 1;
+
+ ad1843_read_multi(ad1843, 2, gp->lfield, &lg, gp->rfield, &rg);
+ if (gp->negative) {
+ lg = mask - lg;
+ rg = mask - rg;
+ }
+ lg = (lg * 100 + (mask >> 1)) / mask;
+ rg = (rg * 100 + (mask >> 1)) / mask;
+ return lg << 0 | rg << 8;
+}
+
+/*
+ * Set an audio channel's gain. Converts from OSS format to AD1843's
+ * format.
+ *
+ * Returns the new gain, which may be lower than the old gain.
+ */
+
+int ad1843_set_gain(struct snd_ad1843 *ad1843, int id, int newval)
+{
+ const struct ad1843_gain *gp = ad1843_gain[id];
+ unsigned short mask = (1 << gp->lfield->nbits) - 1;
+
+ int lg = newval >> 0 & 0xFF;
+ int rg = newval >> 8;
+ if (lg < 0 || lg > 100 || rg < 0 || rg > 100)
+ return -EINVAL;
+ lg = (lg * mask + (mask >> 1)) / 100;
+ rg = (rg * mask + (mask >> 1)) / 100;
+ if (gp->negative) {
+ lg = mask - lg;
+ rg = mask - rg;
+ }
+ ad1843_write_multi(ad1843, 2, gp->lfield, lg, gp->rfield, rg);
+ return ad1843_get_gain(ad1843, id);
+}
+
+/* Returns the current recording source, in OSS format. */
+
+int ad1843_get_recsrc(struct snd_ad1843 *ad1843)
+{
+ int ls = ad1843_read_bits(ad1843, &ad1843_LSS);
+
+ switch (ls) {
+ case 1:
+ return SOUND_MASK_MIC;
+ case 2:
+ return SOUND_MASK_LINE;
+ case 3:
+ return SOUND_MASK_CD;
+ case 6:
+ return SOUND_MASK_PCM;
+ default:
+ return -1;
+ }
+}
+
+/*
+ * Enable/disable digital resample mode in the AD1843.
+ *
+ * The AD1843 requires that ADL, ADR, DA1 and DA2 be powered down
+ * while switching modes. So we save DA's state, power them down,
+ * switch into/out of resample mode, power them up, and restore state.
+ *
+ * This will cause audible glitches if D/A or A/D is going on, so the
+ * driver disallows that (in mixer_write_ioctl()).
+ *
+ * The open question is, is this worth doing? I'm leaving it in,
+ * because it's written, but...
+ */
+
+void ad1843_set_resample_mode(struct snd_ad1843 *ad1843, int onoff)
+{
+ /* Save DA's mute and gain (addr 9/10 is analog gain/attenuation) */
+ int save_da1 = ad1843->read(ad1843->chip, 9);
+ int save_da2 = ad1843->read(ad1843->chip, 10);
+
+ /* Power down A/D and D/A. */
+ ad1843_write_multi(ad1843, 4,
+ &ad1843_DA1EN, 0,
+ &ad1843_DA2EN, 0,
+ &ad1843_ADLEN, 0,
+ &ad1843_ADREN, 0);
+
+ /* Switch mode */
+ ad1843_write_bits(ad1843, &ad1843_DRSFLT, onoff);
+
+ /* Power up A/D and D/A. */
+ ad1843_write_multi(ad1843, 3,
+ &ad1843_DA1EN, 1,
+ &ad1843_DA2EN, 1,
+ &ad1843_ADLEN, 1,
+ &ad1843_ADREN, 1);
+
+ /* Restore DA's mute and gain. */
+ ad1843->write(ad1843->chip, 9, save_da1);
+ ad1843->write(ad1843->chip, 10, save_da2);
+}
+
+/*
+ * Set recording source. Arg newsrc specifies an OSS channel mask.
+ *
+ * The complication is that when we switch into/out of loopback mode
+ * (i.e., src = SOUND_MASK_PCM), we change the AD1843 into/out of
+ * digital resampling mode.
+ *
+ * Returns newsrc on success, -errno on failure.
+ */
+
+int ad1843_set_recsrc(struct snd_ad1843 *ad1843, int newsrc)
+{
+ int bits;
+ int oldbits;
+
+ switch (newsrc) {
+ case SOUND_MASK_PCM:
+ bits = 6;
+ break;
+
+ case SOUND_MASK_MIC:
+ bits = 1;
+ break;
+
+ case SOUND_MASK_LINE:
+ bits = 2;
+ break;
+
+ case SOUND_MASK_CD:
+ bits = 3;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+ oldbits = ad1843_read_bits(ad1843, &ad1843_LSS);
+ if (newsrc == SOUND_MASK_PCM && oldbits != 6) {
+
+ ad1843_set_resample_mode(ad1843, 1);
+ ad1843_write_multi(ad1843, 2,
+ &ad1843_DAADL, 2,
+ &ad1843_DAADR, 2);
+ } else if (newsrc != SOUND_MASK_PCM && oldbits == 6) {
+
+ ad1843_set_resample_mode(ad1843, 0);
+ ad1843_write_multi(ad1843, 2,
+ &ad1843_DAADL, 0,
+ &ad1843_DAADR, 0);
+ }
+ ad1843_write_multi(ad1843, 2, &ad1843_LSS, bits, &ad1843_RSS, bits);
+ return newsrc;
+}
+
+/*
+ * Return current output sources, in OSS format.
+ */
+
+int ad1843_get_outsrc(struct snd_ad1843 *ad1843)
+{
+ int pcm, line, mic, cd;
+
+ pcm = ad1843_read_bits(ad1843, &ad1843_LDA1GM) ? 0 : SOUND_MASK_PCM;
+ line = ad1843_read_bits(ad1843, &ad1843_LX1MM) ? 0 : SOUND_MASK_LINE;
+ cd = ad1843_read_bits(ad1843, &ad1843_LX2MM) ? 0 : SOUND_MASK_CD;
+ mic = ad1843_read_bits(ad1843, &ad1843_LMCMM) ? 0 : SOUND_MASK_MIC;
+
+ return pcm | line | cd | mic;
+}
+
+/*
+ * Set output sources. Arg is a mask of active sources in OSS format.
+ *
+ * Returns source mask on success, -errno on failure.
+ */
+
+int ad1843_set_outsrc(struct snd_ad1843 *ad1843, int mask)
+{
+ int pcm, line, mic, cd;
+
+ if (mask & ~(SOUND_MASK_PCM | SOUND_MASK_LINE |
+ SOUND_MASK_CD | SOUND_MASK_MIC))
+ return -EINVAL;
+ pcm = (mask & SOUND_MASK_PCM) ? 0 : 1;
+ line = (mask & SOUND_MASK_LINE) ? 0 : 1;
+ mic = (mask & SOUND_MASK_MIC) ? 0 : 1;
+ cd = (mask & SOUND_MASK_CD) ? 0 : 1;
+
+ ad1843_write_multi(ad1843, 2, &ad1843_LDA1GM, pcm, &ad1843_RDA1GM, pcm);
+ ad1843_write_multi(ad1843, 2, &ad1843_LX1MM, line, &ad1843_RX1MM, line);
+ ad1843_write_multi(ad1843, 2, &ad1843_LX2MM, cd, &ad1843_RX2MM, cd);
+ ad1843_write_multi(ad1843, 2, &ad1843_LMCMM, mic, &ad1843_RMCMM, mic);
+
+ return mask;
+}
+
+/* Setup ad1843 for D/A conversion. */
+
+void ad1843_setup_dac(struct snd_ad1843 *ad1843,
+ unsigned int id,
+ unsigned int framerate,
+ snd_pcm_format_t fmt,
+ unsigned int channels)
+{
+ int ad_fmt = 0, ad_mode = 0;
+
+ switch (fmt) {
+ case SNDRV_PCM_FORMAT_S8:
+ ad_fmt = 0;
+ break;
+ case SNDRV_PCM_FORMAT_U8:
+ ad_fmt = 0;
+ break;
+ case SNDRV_PCM_FORMAT_S16_LE:
+ ad_fmt = 1;
+ break;
+ case SNDRV_PCM_FORMAT_MU_LAW:
+ ad_fmt = 2;
+ break;
+ case SNDRV_PCM_FORMAT_A_LAW:
+ ad_fmt = 3;
+ break;
+ default:
+ break;
+ }
+
+ switch (channels) {
+ case 2:
+ ad_mode = 0;
+ break;
+ case 1:
+ ad_mode = 1;
+ break;
+ default:
+ break;
+ }
+
+ if (id) {
+ ad1843_write_bits(ad1843, &ad1843_C2C, framerate);
+ ad1843_write_multi(ad1843, 2,
+ &ad1843_DA2SM, ad_mode,
+ &ad1843_DA2F, ad_fmt);
+ } else {
+ ad1843_write_bits(ad1843, &ad1843_C1C, framerate);
+ ad1843_write_multi(ad1843, 2,
+ &ad1843_DA1SM, ad_mode,
+ &ad1843_DA1F, ad_fmt);
+ }
+}
+
+void ad1843_shutdown_dac(struct snd_ad1843 *ad1843, unsigned int id)
+{
+ if (id)
+ ad1843_write_bits(ad1843, &ad1843_DA2F, 1);
+ else
+ ad1843_write_bits(ad1843, &ad1843_DA1F, 1);
+}
+
+void ad1843_setup_adc(struct snd_ad1843 *ad1843,
+ unsigned int framerate,
+ snd_pcm_format_t fmt,
+ unsigned int channels)
+{
+ int da_fmt = 0;
+
+ switch (fmt) {
+ case SNDRV_PCM_FORMAT_S8: da_fmt = 0; break;
+ case SNDRV_PCM_FORMAT_U8: da_fmt = 0; break;
+ case SNDRV_PCM_FORMAT_S16_LE: da_fmt = 1; break;
+ case SNDRV_PCM_FORMAT_MU_LAW: da_fmt = 2; break;
+ case SNDRV_PCM_FORMAT_A_LAW: da_fmt = 3; break;
+ default: break;
+ }
+
+ ad1843_write_bits(ad1843, &ad1843_C3C, framerate);
+ ad1843_write_multi(ad1843, 2,
+ &ad1843_ADLF, da_fmt, &ad1843_ADRF, da_fmt);
+}
+
+void ad1843_shutdown_adc(struct snd_ad1843 *ad1843)
+{
+ /* nothing to do */
+}
+
+/*
+ * Fully initialize the ad1843. As described in the AD1843 data
+ * sheet, section "START-UP SEQUENCE". The numbered comments are
+ * subsection headings from the data sheet. See the data sheet, pages
+ * 52-54, for more info.
+ *
+ * return 0 on success, -errno on failure. */
+
+int ad1843_init(struct snd_ad1843 *ad1843)
+{
+ unsigned long later;
+
+ if (ad1843_read_bits(ad1843, &ad1843_INIT) != 0) {
+ printk(KERN_ERR "ad1843: AD1843 won't initialize\n");
+ return -EIO;
+ }
+
+ ad1843_write_bits(ad1843, &ad1843_SCF, 1);
+
+ /* 4. Put the conversion resources into standby. */
+ ad1843_write_bits(ad1843, &ad1843_PDNI, 0);
+ later = jiffies + HZ / 2; /* roughly half a second */
+
+ while (ad1843_read_bits(ad1843, &ad1843_PDNO)) {
+ if (time_after(jiffies, later)) {
+ printk(KERN_ERR
+ "ad1843: AD1843 won't power up\n");
+ return -EIO;
+ }
+ schedule();
+ }
+
+ /* 5. Power up the clock generators and enable clock output pins. */
+ ad1843_write_multi(ad1843, 3,
+ &ad1843_C1EN, 1,
+ &ad1843_C2EN, 1,
+ &ad1843_C3EN, 1);
+
+ /* 6. Configure conversion resources while they are in standby. */
+
+ /* DAC1/2 use clock 1/2 as source, ADC uses clock 3. Always. */
+ ad1843_write_multi(ad1843, 3,
+ &ad1843_DA1C, 1,
+ &ad1843_DA1C, 2,
+ &ad1843_ADLC, 3,
+ &ad1843_ADRC, 3);
+
+ /* 7. Enable conversion resources. */
+ ad1843_write_bits(ad1843, &ad1843_ADTLK, 1);
+ ad1843_write_multi(ad1843, 5,
+ &ad1843_ANAEN, 1,
+ &ad1843_AAMEN, 1,
+ &ad1843_DA1EN, 1,
+ &ad1843_DA2EN, 1,
+ &ad1843_ADLEN, 1,
+ &ad1843_ADREN, 1);
+
+ /* 8. Configure conversion resources while they are enabled. */
+ ad1843_write_bits(ad1843, &ad1843_DA1C, 1);
+ ad1843_write_bits(ad1843, &ad1843_DA2C, 1);
+
+ /* Unmute all channels. */
+
+ ad1843_set_outsrc(ad1843,
+ (SOUND_MASK_PCM | SOUND_MASK_LINE |
+ SOUND_MASK_MIC | SOUND_MASK_CD));
+ ad1843_write_multi(ad1843, 4,
+ &ad1843_LDA1AM, 0,
+ &ad1843_RDA1AM, 0,
+ &ad1843_LDA2AM, 0,
+ &ad1843_RDA2AM, 0);
+
+ /* Set default recording source to Line In and set
+ * mic gain to +20 dB.
+ */
+ ad1843_set_recsrc(ad1843, SOUND_MASK_LINE);
+ ad1843_write_multi(ad1843, 2, &ad1843_LMGE, 1, &ad1843_RMGE, 1);
+
+ /* Set Speaker Out level to +/- 4V and unmute it. */
+ ad1843_write_multi(ad1843, 3,
+ &ad1843_HPOS, 1,
+ &ad1843_HPOM, 0,
+ &ad1843_MPOM, 0);
+
+ return 0;
+}
diff --git a/sound/mips/sgio2audio.c b/sound/mips/sgio2audio.c
new file mode 100644
index 0000000..dea229b
--- /dev/null
+++ b/sound/mips/sgio2audio.c
@@ -0,0 +1,714 @@
+/*
+ * Sound driver for Silicon Graphics O2 Workstations A/V board audio.
+ *
+ * Copyright 2003 Vivien Chappelier <vivien.chappelier@linux-mips.org>
+ *
+ * INCOMPLETE:
+ * - finish PCM,
+ * . finish/test 2nd DAC
+ * . recording
+ * - mixer and controls
+ * - /proc interface
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/gfp.h>
+#include <linux/vmalloc.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <asm/ip32/ip32_ints.h>
+#include <asm/ip32/mace.h>
+
+#include <sound/core.h>
+#include <sound/control.h>
+#include <sound/pcm.h>
+#define SNDRV_GET_ID
+#include <sound/initval.h>
+#include <sound/ad1843.h>
+
+
+MODULE_AUTHOR("Vivien Chappelier <vivien.chappelier@linux-mips.org>");
+MODULE_DESCRIPTION("SGI O2 Audio");
+MODULE_LICENSE("GPL");
+MODULE_SUPPORTED_DEVICE("{{Silicon Graphics, O2 Audio}}");
+
+
+#define SGIO2AUDIO_MAX_VOLUME 1000
+
+#define AUDIO_CONTROL_RESET BIT(0) /* 1: reset audio interface */
+#define AUDIO_CONTROL_CODEC_PRESENT BIT(1) /* 1: codec detected */
+/* 2-8 : channel 1 write ptr alias */
+/* 9-15 : channel 2 read ptr alias */
+/* 16-22 : channel 3 read ptr alias */
+#define AUDIO_CONTROL_VOLUME_BUTTON_UP BIT(23) /* latched volume button */
+#define AUDIO_CONTROL_VOLUME_BUTTON_DOWN BIT(24) /* latched volume button */
+
+#define CODEC_CONTROL_WORD_SHIFT 0
+#define CODEC_CONTROL_WORD_MASK ((1 << 16) - 1)
+#define CODEC_CONTROL_READ BIT(16)
+#define CODEC_CONTROL_ADDRESS_SHIFT 17
+#define CODEC_CONTROL_ADDRESS_MASK ((1 << 7) - 1)
+
+#define CHANNEL_PTR_SHIFT 5
+#define CHANNEL_PTR_MASK ((1 << 6) - 1)
+#define CHANNEL_CONTROL_RESET BIT(10) /* 1: reset channel */
+#define CHANNEL_DMA_ENABLE BIT(9) /* 1: enable DMA transfer */
+#define CHANNEL_INT_THRESHOLD_DISABLED (0 << 5) /* interrupt disabled */
+#define CHANNEL_INT_THRESHOLD_25 (1 << 5) /* int on buffer >25% full */
+#define CHANNEL_INT_THRESHOLD_50 (2 << 5) /* int on buffer >50% full */
+#define CHANNEL_INT_THRESHOLD_75 (3 << 5) /* int on buffer >75% full */
+#define CHANNEL_INT_THRESHOLD_EMPTY (4 << 5) /* int on buffer empty */
+#define CHANNEL_INT_THRESHOLD_NOT_EMPTY (5 << 5) /* int on buffer !empty */
+#define CHANNEL_INT_THRESHOLD_FULL (6 << 5) /* int on buffer empty */
+#define CHANNEL_INT_THRESHOLD_NOT_FULL (7 << 5) /* int on buffer !empty */
+
+#define CHANNEL_IN_BASE (0 << 12)
+#define CHANNEL_OUT1_BASE (1 << 12)
+#define CHANNEL_OUT2_BASE (2 << 12)
+
+#define CHANNEL_RING_SHIFT 12
+#define CHANNEL_RING_SIZE (1 << CHANNEL_RING_SHIFT)
+#define CHANNEL_RING_MASK (CHANNEL_RING_SIZE - 1)
+
+#define CHANNEL_LEFT_SHIFT 40
+#define CHANNEL_RIGHT_SHIFT 8
+
+/* definition of the chip-specific record */
+struct snd_sgio2audio {
+ struct snd_card *card;
+
+ struct snd_pcm *pcm;
+
+ /* codec */
+ struct snd_ad1843 *ad1843;
+ spinlock_t ad1843_lock;
+
+ /* channels */
+ struct {
+ struct snd_pcm_substream *substream;
+ void *buffer;
+ unsigned int pos;
+ snd_pcm_uframes_t size;
+ spinlock_t lock;
+ } channel[3];
+
+ /* properties */
+ int volume;
+ snd_pcm_format_t format;
+
+ /* resources */
+ void *ring_base;
+ dma_addr_t ring_base_dma;
+ int irq_start;
+ int irq_end;
+};
+
+/* PCM hardware definition */
+static struct snd_pcm_hardware snd_sgio2audio_playback_hw = {
+ .info = (SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER),
+ .formats = SNDRV_PCM_FMTBIT_S16_BE,
+ .rates = SNDRV_PCM_RATE_8000_48000,
+ .rate_min = 8000,
+ .rate_max = 48000,
+ .channels_min = 2,
+ .channels_max = 2,
+ .buffer_bytes_max = 65536,
+ .period_bytes_min = 32768,
+ .period_bytes_max = 65536,
+ .periods_min = 1,
+ .periods_max = 1024,
+};
+
+/* AD1843 access */
+
+/*
+ * read_ad1843_reg returns the current contents of a 16 bit AD1843 register.
+ *
+ * Returns unsigned register value on success, -errno on failure.
+ */
+static int read_ad1843_reg(void *priv, int reg)
+{
+ struct snd_sgio2audio *chip = priv;
+ int val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&chip->ad1843_lock, flags);
+
+ writeq((reg << CODEC_CONTROL_ADDRESS_SHIFT) |
+ CODEC_CONTROL_READ, &mace->perif.audio.codec_control);
+ wmb();
+ val = readq(&mace->perif.audio.codec_control); /* flush bus */
+ udelay(200);
+
+ val = readq(&mace->perif.audio.codec_read);
+
+ spin_unlock_irqrestore(&chip->ad1843_lock, flags);
+ return val;
+}
+
+/*
+ * write_ad1843_reg writes the specified value to a 16 bit AD1843 register.
+ */
+static int write_ad1843_reg(void *priv, int reg, int word)
+{
+ struct snd_sgio2audio *chip = priv;
+ int val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&chip->ad1843_lock, flags);
+
+ writeq((reg << CODEC_CONTROL_ADDRESS_SHIFT) |
+ (word << CODEC_CONTROL_WORD_SHIFT),
+ &mace->perif.audio.codec_control);
+ wmb();
+ val = readq(&mace->perif.audio.codec_control); /* flush bus */
+ udelay(200);
+
+ spin_unlock_irqrestore(&chip->ad1843_lock, flags);
+ return 0;
+}
+
+static struct snd_ad1843 ad1843_ops = {
+ NULL, /* initialized in snd_sgio2_audio_create */
+ read_ad1843_reg,
+ write_ad1843_reg,
+};
+
+/* low-level audio interface DMA */
+
+/* put some DMA data in bounce buffer, count must be a multiple of 32 */
+/* returns 1 if a period has elapsed */
+static int snd_sgio2audio_dma_push_frag(struct snd_sgio2audio *chip,
+ unsigned int ch, unsigned int count)
+{
+ int ret;
+ s64 l, r;
+ unsigned long dst_base, dst_pos;
+ unsigned long src_base, src_pos, src_mask;
+ u64 *dst;
+ s16 *src;
+ unsigned long flags;
+ struct snd_pcm_runtime *runtime = chip->channel[ch].substream->runtime;
+
+ spin_lock_irqsave(&chip->channel[ch].lock, flags);
+
+ dst_base = (unsigned long) chip->ring_base | (ch << CHANNEL_RING_SHIFT);
+ dst_pos = (unsigned long) readq(&mace->perif.audio.chan[ch].write_ptr);
+ src_base = (unsigned long) chip->channel[ch].buffer;
+ src_pos = (unsigned long) chip->channel[ch].pos;
+ src_mask = frames_to_bytes(runtime, runtime->buffer_size) - 1;
+
+ /* check if a period has elapsed */
+ chip->channel[ch].size += (count >> 3); /* in frames */
+ ret = chip->channel[ch].size >= runtime->period_size;
+ chip->channel[ch].size %= runtime->period_size;
+
+ while (count) {
+ src = (s16 *)(src_base + src_pos);
+ dst = (u64 *)(dst_base + dst_pos);
+
+ l = src[0]; /* sign extend */
+ r = src[1]; /* sign extend */
+
+ *dst = ((l & 0x00ffffff) << CHANNEL_LEFT_SHIFT) |
+ ((r & 0x00ffffff) << CHANNEL_RIGHT_SHIFT);
+
+ dst_pos = (dst_pos + sizeof(u64)) & CHANNEL_RING_MASK;
+ src_pos = (src_pos + 2 * sizeof(s16)) & src_mask;
+ count -= sizeof(u64);
+ }
+
+ writeq(dst_pos, &mace->perif.audio.chan[ch].write_ptr); /* in bytes */
+ chip->channel[ch].pos = src_pos;
+
+ spin_unlock_irqrestore(&chip->channel[ch].lock, flags);
+ return ret;
+}
+
+static int snd_sgio2audio_dma_start(struct snd_pcm_substream *substream)
+{
+ struct snd_sgio2audio *chip = snd_pcm_substream_chip(substream);
+ unsigned int index = 1 + substream->number;
+
+ /* reset DMA channel */
+ writeq(CHANNEL_CONTROL_RESET, &mace->perif.audio.chan[index].control);
+ udelay(10);
+ writeq(0, &mace->perif.audio.chan[index].control);
+
+ /* push a full buffer */
+ snd_sgio2audio_dma_push_frag(chip, index, CHANNEL_RING_SIZE - 32);
+
+ /* set DMA to wake on 50% empty and enable interrupt */
+ writeq(CHANNEL_DMA_ENABLE | CHANNEL_INT_THRESHOLD_50,
+ &mace->perif.audio.chan[index].control);
+ return 0;
+}
+
+static int snd_sgio2audio_dma_stop(struct snd_pcm_substream *substream)
+{
+ unsigned int index = 1 + substream->number;
+
+ writeq(0, &mace->perif.audio.chan[index].control);
+ return 0;
+}
+
+static void snd_sgio2audio_dma_interrupt(struct snd_sgio2audio *chip, int ch)
+{
+ struct snd_pcm_substream *substream = chip->channel[ch].substream;
+ int count;
+
+ /* fill the ring */
+ count = CHANNEL_RING_SIZE -
+ readq(&mace->perif.audio.chan[ch].depth) - 32;
+ if (snd_sgio2audio_dma_push_frag(chip, ch, count))
+ snd_pcm_period_elapsed(substream);
+}
+
+static irqreturn_t snd_sgio2audio_interrupt(int irq, void *dev_id)
+{
+ struct snd_sgio2audio *chip = dev_id;
+ unsigned long status;
+
+ switch (irq) {
+ /* volume changed */
+ case MACEISA_AUDIO_SC_IRQ:
+ status = readq(&mace->perif.audio.control);
+ if (status & AUDIO_CONTROL_VOLUME_BUTTON_UP) {
+ status &= ~AUDIO_CONTROL_VOLUME_BUTTON_UP;
+ writeq(status, &mace->perif.audio.control);
+ if (chip->volume < SGIO2AUDIO_MAX_VOLUME)
+ chip->volume++;
+ }
+ if (status & AUDIO_CONTROL_VOLUME_BUTTON_DOWN) {
+ status &= ~AUDIO_CONTROL_VOLUME_BUTTON_DOWN;
+ writeq(status, &mace->perif.audio.control);
+ if (chip->volume > 0)
+ chip->volume--;
+ }
+ /* program AD1843 with the new volume */
+ ad1843_set_gain(chip->ad1843, AD1843_GAIN_PCM_0,
+ chip->volume / 10);
+ ad1843_set_gain(chip->ad1843, AD1843_GAIN_PCM_1,
+ chip->volume / 10);
+ break;
+
+ /* dma ring ready */
+ case MACEISA_AUDIO1_DMAT_IRQ:
+ snd_sgio2audio_dma_interrupt(chip, 0);
+ break;
+ case MACEISA_AUDIO2_DMAT_IRQ:
+ snd_sgio2audio_dma_interrupt(chip, 1);
+ break;
+ case MACEISA_AUDIO3_DMAT_IRQ:
+ snd_sgio2audio_dma_interrupt(chip, 2);
+ break;
+ default:
+ printk(KERN_ERR "sgio2audio: unhandled interrupt %d\n", irq);
+ /* TEMP : stop DMA */
+ writeq(0, &mace->perif.audio.chan[0].control);
+ writeq(0, &mace->perif.audio.chan[1].control);
+ writeq(0, &mace->perif.audio.chan[2].control);
+ break;
+ }
+ return IRQ_HANDLED;
+}
+
+/* PCM part */
+
+/* PCM playback open callback */
+static int snd_sgio2audio_playback_open(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+
+ runtime->hw = snd_sgio2audio_playback_hw;
+ return 0;
+}
+
+/* PCM playback close callback */
+static int snd_sgio2audio_playback_close(struct snd_pcm_substream *substream)
+{
+ /* TODO: hardware code */
+ return 0;
+}
+
+/* PCM capture open callback */
+static int snd_sgio2audio_capture_open(struct snd_pcm_substream *substream)
+{
+ struct snd_sgio2audio *chip = snd_pcm_substream_chip(substream);
+ struct snd_pcm_runtime *runtime = substream->runtime;
+
+ runtime->hw = snd_sgio2audio_playback_hw;
+
+ /* initialize AD1843 */
+ ad1843_init(chip->ad1843);
+
+ return 0;
+}
+
+/* PCM capture close callback */
+static int snd_sgio2audio_capture_close(struct snd_pcm_substream *substream)
+{
+ return 0;
+}
+
+
+/* hw_params callback */
+static int snd_sgio2audio_pcm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *hw_params)
+{
+ /* alloc virtual 'dma' area */
+ if (substream->runtime->dma_area)
+ vfree(substream->runtime->dma_area);
+ substream->runtime->dma_area = vmalloc(params_buffer_bytes(hw_params));
+ if (substream->runtime->dma_area == NULL)
+ return -ENOMEM;
+ return 0;
+}
+
+/* hw_free callback */
+static int snd_sgio2audio_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+ if (substream->runtime->dma_area)
+ vfree(substream->runtime->dma_area);
+ substream->runtime->dma_area = NULL;
+ return 0;
+}
+
+/* prepare callback */
+static int snd_sgio2audio_pcm_prepare(struct snd_pcm_substream *substream)
+{
+ struct snd_sgio2audio *chip = snd_pcm_substream_chip(substream);
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ unsigned int index = 1 + substream->number;
+ unsigned long flags;
+
+ spin_lock_irqsave(&chip->channel[index].lock, flags);
+
+ /* Setup the pseudo-dma transfer pointers. */
+ chip->channel[index].buffer = runtime->dma_area;
+ chip->channel[index].pos = 0;
+ chip->channel[index].size = 0;
+ chip->channel[index].substream = substream;
+
+ /* set AD1843 format */
+ /* hardware format is always S16_LE */
+ if (index) {
+ /* playback */
+ ad1843_setup_dac(chip->ad1843,
+ index - 1,
+ runtime->rate,
+ SNDRV_PCM_FORMAT_S16_LE,
+ runtime->channels);
+ } else {
+ /* capture */
+ ad1843_setup_adc(chip->ad1843,
+ runtime->rate,
+ SNDRV_PCM_FORMAT_S16_LE,
+ runtime->channels);
+ }
+
+ spin_unlock_irqrestore(&chip->channel[index].lock, flags);
+ return 0;
+}
+
+/* trigger callback */
+static int snd_sgio2audio_pcm_trigger(struct snd_pcm_substream *substream,
+ int cmd)
+{
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ /* start the PCM engine */
+ snd_sgio2audio_dma_start(substream);
+ break;
+ case SNDRV_PCM_TRIGGER_STOP:
+ /* stop the PCM engine */
+ snd_sgio2audio_dma_stop(substream);
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/* pointer callback */
+static snd_pcm_uframes_t
+snd_sgio2audio_pcm_pointer(struct snd_pcm_substream *substream)
+{
+ struct snd_sgio2audio *chip = snd_pcm_substream_chip(substream);
+ unsigned int index = 1 + substream->number;
+ snd_pcm_uframes_t current_ptr;
+
+ /* get the current hardware pointer */
+ current_ptr = bytes_to_frames(substream->runtime,
+ chip->channel[index].pos);
+
+ return current_ptr;
+}
+
+/* get the physical page pointer on the given offset */
+static struct page *snd_sgio2audio_page(struct snd_pcm_substream *substream,
+ unsigned long offset)
+{
+ return vmalloc_to_page(substream->runtime->dma_area + offset);
+}
+
+/* operators */
+static struct snd_pcm_ops snd_sgio2audio_playback_ops = {
+ .open = snd_sgio2audio_playback_open,
+ .close = snd_sgio2audio_playback_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = snd_sgio2audio_pcm_hw_params,
+ .hw_free = snd_sgio2audio_pcm_hw_free,
+ .prepare = snd_sgio2audio_pcm_prepare,
+ .trigger = snd_sgio2audio_pcm_trigger,
+ .pointer = snd_sgio2audio_pcm_pointer,
+ .page = snd_sgio2audio_page,
+};
+
+static struct snd_pcm_ops snd_sgio2audio_capture_ops = {
+ .open = snd_sgio2audio_capture_open,
+ .close = snd_sgio2audio_capture_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = snd_sgio2audio_pcm_hw_params,
+ .hw_free = snd_sgio2audio_pcm_hw_free,
+ .prepare = snd_sgio2audio_pcm_prepare,
+ .trigger = snd_sgio2audio_pcm_trigger,
+ .pointer = snd_sgio2audio_pcm_pointer,
+ .page = snd_sgio2audio_page,
+};
+
+/*
+ * definitions of capture are omitted here...
+ */
+
+/* create a pcm device */
+static int __devinit snd_sgio2audio_new_pcm(struct snd_sgio2audio *chip)
+{
+ struct snd_pcm *pcm;
+ int err;
+
+ /* create a new pcm device with two outputs and one input */
+ err = snd_pcm_new(chip->card, "SGI O2 Audio", 0, 2, 1, &pcm);
+ if (err < 0)
+ return err;
+
+ pcm->private_data = chip;
+ strcpy(pcm->name, "SGI O2 Audio");
+ chip->pcm = pcm;
+
+ /* set operators */
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
+ &snd_sgio2audio_playback_ops);
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE,
+ &snd_sgio2audio_capture_ops);
+ return 0;
+}
+
+/* ALSA driver */
+
+static int snd_sgio2audio_free(struct snd_sgio2audio *chip)
+{
+ int irq;
+
+ /* reset interface */
+ writeq(AUDIO_CONTROL_RESET, &mace->perif.audio.control);
+ udelay(1);
+ writeq(0, &mace->perif.audio.control);
+
+ /* release IRQ's */
+ for (irq = MACEISA_AUDIO_SW_IRQ; irq <= MACEISA_AUDIO3_MERR_IRQ; irq++)
+ free_irq(irq, chip);
+
+ dma_free_coherent(NULL, MACEISA_RINGBUFFERS_SIZE,
+ chip->ring_base, chip->ring_base_dma);
+
+ /* release card data */
+ kfree(chip);
+ return 0;
+}
+
+static int snd_sgio2audio_dev_free(struct snd_device *device)
+{
+ struct snd_sgio2audio *chip = device->device_data;
+ /* TODO: component destructor */
+ return snd_sgio2audio_free(chip);
+}
+
+static struct snd_device_ops ops = {
+ .dev_free = snd_sgio2audio_dev_free,
+};
+
+static int __devinit snd_sgio2audio_create(struct snd_card *card,
+ struct snd_sgio2audio **rchip)
+{
+ struct snd_sgio2audio *chip;
+ int i, err, irq;
+
+ *rchip = NULL;
+
+ /* check if a codec is attached to the interface */
+ /* (Audio or Audio/Video board present) */
+ if (!(readq(&mace->perif.audio.control) & AUDIO_CONTROL_CODEC_PRESENT))
+ return -ENOENT;
+
+ chip = kzalloc(sizeof(struct snd_sgio2audio), GFP_KERNEL);
+ if (chip == NULL)
+ return -ENOMEM;
+
+ chip->card = card;
+ chip->irq_start = MACEISA_AUDIO_SW_IRQ;
+ chip->irq_end = MACEISA_AUDIO3_MERR_IRQ;
+
+ chip->ring_base = dma_alloc_coherent(NULL, MACEISA_RINGBUFFERS_SIZE,
+ &chip->ring_base_dma, GFP_USER);
+ if (chip->ring_base == NULL) {
+ printk(KERN_ERR
+ "sgio2audio: could not allocate ring buffers\n");
+ kfree(chip);
+ return -ENOMEM;
+ }
+
+ spin_lock_init(&chip->ad1843_lock);
+
+ chip->volume = SGIO2AUDIO_MAX_VOLUME;
+
+ /* initialize channels */
+ for (i = 0; i < 3; i++) {
+ spin_lock_init(&chip->channel[i].lock);
+ chip->channel[i].substream = NULL;
+ chip->channel[i].buffer = NULL;
+ chip->channel[i].pos = 0;
+ chip->channel[i].size = 0;
+ }
+
+ /* allocate IRQs */
+ for (irq = chip->irq_start; irq <= chip->irq_end; irq++) {
+ if (request_irq(irq, snd_sgio2audio_interrupt,
+ IRQF_SHARED, "SGI O2 Audio",
+ (void *)chip)) {
+ snd_sgio2audio_free(chip);
+ printk(KERN_ERR
+ "sgio2audio: cannot allocate irq %d\n", irq);
+ return -EBUSY;
+ }
+ }
+
+ /* reset the interface */
+ writeq(AUDIO_CONTROL_RESET, &mace->perif.audio.control);
+ udelay(1);
+ writeq(0, &mace->perif.audio.control);
+
+ /* set ring base */
+ writeq(chip->ring_base_dma, &mace->perif.ctrl.ringbase);
+
+ /* attach the AD1843 codec */
+ chip->ad1843 = &ad1843_ops;
+ chip->ad1843->chip = (void *) chip;
+
+ /* initialize the AD1843 codec */
+ err = ad1843_init(chip->ad1843);
+ if (err < 0) {
+ snd_sgio2audio_free(chip);
+ return err;
+ }
+
+ err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
+ if (err < 0) {
+ snd_sgio2audio_free(chip);
+ return err;
+ }
+ *rchip = chip;
+ return 0;
+}
+
+static int __devinit snd_sgio2audio_probe(struct platform_device *pdev)
+{
+ struct snd_card *card;
+ struct snd_sgio2audio *chip;
+ int err;
+
+ card = snd_card_new(0, 0, THIS_MODULE, 0);
+ if (card == NULL)
+ return -ENOMEM;
+
+ err = snd_sgio2audio_create(card, &chip);
+ if (err < 0) {
+ snd_card_free(card);
+ return err;
+ }
+
+ /* TODO : finish PCM, do mixer and /proc */
+ err = snd_sgio2audio_new_pcm(chip);
+ if (err < 0) {
+ snd_card_free(card);
+ return err;
+ }
+
+ strcpy(card->driver, "SGI O2 Audio");
+ strcpy(card->shortname, "SGI O2 Audio");
+ sprintf(card->longname, "%s irq %i-%i",
+ card->shortname,
+ chip->irq_start, chip->irq_end);
+
+ err = snd_card_register(card);
+ if (err < 0) {
+ snd_card_free(card);
+ return err;
+ }
+ platform_set_drvdata(pdev, card);
+ return 0;
+}
+
+static int __exit snd_sgio2audio_remove(struct platform_device *pdev)
+{
+ struct snd_card *card = platform_get_drvdata(pdev);
+
+ snd_card_free(card);
+ platform_set_drvdata(pdev, NULL);
+ return 0;
+}
+
+static struct platform_driver sgio2audio_driver = {
+ .probe = snd_sgio2audio_probe,
+ .remove = __devexit_p(snd_sgio2audio_remove),
+ .driver = {
+ .name = "sgio2audio",
+ .owner = THIS_MODULE,
+ }
+};
+
+static int __init alsa_card_sgio2audio_init(void)
+{
+ return platform_driver_register(&sgio2audio_driver);
+}
+
+static void __exit alsa_card_sgio2audio_exit(void)
+{
+ platform_driver_unregister(&sgio2audio_driver);
+}
+
+module_init(alsa_card_sgio2audio_init)
+module_exit(alsa_card_sgio2audio_exit)
--
Crap can work. Given enough thrust pigs will fly, but it's not necessary a
good idea. [ RFC1925, 2.3 ]
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: SGI O2 sound driver
2008-06-28 14:13 ` Thomas Bogendoerfer
@ 2008-06-28 22:45 ` Thomas Bogendoerfer
2008-06-29 22:35 ` SGI O2 sound driver v4 Thomas Bogendoerfer
0 siblings, 1 reply; 8+ messages in thread
From: Thomas Bogendoerfer @ 2008-06-28 22:45 UTC (permalink / raw)
To: linux-mips
On Sat, Jun 28, 2008 at 04:13:37PM +0200, Thomas Bogendoerfer wrote:
> v2 is now checkpatch clean and I switched over to use a platform device.
> The next step is now to get capture and 2nd playback going.
(important) changes in v3:
- support 2nd DAC
- added delay after releasing module reset
Thomas.
arch/mips/sgi-ip32/ip32-platform.c | 18 +
include/sound/ad1843.h | 47 +++
sound/mips/Kconfig | 6 +
sound/mips/Makefile | 2 +
sound/mips/ad1843.c | 653 ++++++++++++++++++++++++++++++++
sound/mips/sgio2audio.c | 730 ++++++++++++++++++++++++++++++++++++
6 files changed, 1456 insertions(+), 0 deletions(-)
diff --git a/arch/mips/sgi-ip32/ip32-platform.c b/arch/mips/sgi-ip32/ip32-platform.c
index 89a71f4..8b624b9 100644
--- a/arch/mips/sgi-ip32/ip32-platform.c
+++ b/arch/mips/sgi-ip32/ip32-platform.c
@@ -65,6 +65,24 @@ static __init int meth_devinit(void)
device_initcall(meth_devinit);
+static __init int sgio2audio_devinit(void)
+{
+ struct platform_device *pd;
+ int ret;
+
+ pd = platform_device_alloc("sgio2audio", -1);
+ if (!pd)
+ return -ENOMEM;
+
+ ret = platform_device_add(pd);
+ if (ret)
+ platform_device_put(pd);
+
+ return ret;
+}
+
+device_initcall(sgio2audio_devinit);
+
MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("8250 UART probe driver for SGI IP32 aka O2");
diff --git a/include/sound/ad1843.h b/include/sound/ad1843.h
new file mode 100644
index 0000000..492d10c
--- /dev/null
+++ b/include/sound/ad1843.h
@@ -0,0 +1,47 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright 2003 Vivien Chappelier <vivien.chappelier@linux-mips.org>
+ */
+
+#ifndef __SOUND_AD1843_H
+#define __SOUND_AD1843_H
+
+struct snd_ad1843 {
+ void *chip;
+ int (*read)(void *chip, int reg);
+ int (*write)(void *chip, int reg, int val);
+};
+
+#define AD1843_GAIN_RECLEV 0
+#define AD1843_GAIN_LINE 1
+#define AD1843_GAIN_CD 2
+#define AD1843_GAIN_MIC 3
+#define AD1843_GAIN_PCM_0 4
+#define AD1843_GAIN_PCM_1 5
+#define AD1843_GAIN_SIZE (AD1843_GAIN_PCM_1+1)
+
+int ad1843_get_gain(struct snd_ad1843 *ad1843, int id);
+int ad1843_set_gain(struct snd_ad1843 *ad1843, int id, int newval);
+int ad1843_get_recsrc(struct snd_ad1843 *ad1843);
+void ad1843_set_resample_mode(struct snd_ad1843 *ad1843, int onoff);
+int ad1843_set_recsrc(struct snd_ad1843 *ad1843, int newsrc);
+int ad1843_get_outsrc(struct snd_ad1843 *ad1843);
+int ad1843_set_outsrc(struct snd_ad1843 *ad1843, int mask);
+void ad1843_setup_dac(struct snd_ad1843 *ad1843,
+ unsigned int id,
+ unsigned int framerate,
+ snd_pcm_format_t fmt,
+ unsigned int channels);
+void ad1843_shutdown_dac(struct snd_ad1843 *ad1843,
+ unsigned int id);
+void ad1843_setup_adc(struct snd_ad1843 *ad1843,
+ unsigned int framerate,
+ snd_pcm_format_t fmt,
+ unsigned int channels);
+void ad1843_shutdown_adc(struct snd_ad1843 *ad1843);
+int ad1843_init(struct snd_ad1843 *ad1843);
+
+#endif /* __SOUND_AD1843_H */
diff --git a/sound/mips/Kconfig b/sound/mips/Kconfig
index 531f8ba..a3e202e 100644
--- a/sound/mips/Kconfig
+++ b/sound/mips/Kconfig
@@ -11,5 +11,11 @@ config SND_AU1X00
help
ALSA Sound driver for the Au1x00's AC97 port.
+config SND_SGI_O2
+ tristate "SGI O2 Audio"
+ depends on SND && SGI_IP32
+ help
+ Sound support for the SGI O2 Workstation.
+
endmenu
diff --git a/sound/mips/Makefile b/sound/mips/Makefile
index 47afed9..55624d8 100644
--- a/sound/mips/Makefile
+++ b/sound/mips/Makefile
@@ -2,7 +2,9 @@
# Makefile for ALSA
#
+snd-sgi-o2-objs := sgio2audio.o ad1843.o
snd-au1x00-objs := au1x00.o
# Toplevel Module Dependency
obj-$(CONFIG_SND_AU1X00) += snd-au1x00.o
+obj-$(CONFIG_SND_SGI_O2) += snd-sgi-o2.o
diff --git a/sound/mips/ad1843.c b/sound/mips/ad1843.c
new file mode 100644
index 0000000..b766698
--- /dev/null
+++ b/sound/mips/ad1843.c
@@ -0,0 +1,653 @@
+/*
+ * AD1843 low level driver
+ *
+ * Copyright 2003 Vivien Chappelier <vivien.chappelier@linux-mips.org>
+ *
+ * inspired from vwsnd.c (SGI VW audio driver)
+ * Copyright 1999 Silicon Graphics, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/slab.h>
+
+#include <linux/init.h>
+#include <linux/jiffies.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/initval.h>
+#include <sound/ad1843.h>
+
+/* TEMP: OSS stuff */
+#include <linux/soundcard.h>
+
+/*
+ * AD1843 bitfield definitions. All are named as in the AD1843 data
+ * sheet, with ad1843_ prepended and individual bit numbers removed.
+ *
+ * E.g., bits LSS0 through LSS2 become ad1843_LSS.
+ *
+ * Only the bitfields we need are defined.
+ */
+
+struct ad1843_bitfield {
+ char reg;
+ char lo_bit;
+ char nbits;
+};
+
+static const struct ad1843_bitfield
+ ad1843_PDNO = { 0, 14, 1 }, /* Converter Power-Down Flag */
+ ad1843_INIT = { 0, 15, 1 }, /* Clock Initialization Flag */
+ ad1843_RIG = { 2, 0, 4 }, /* Right ADC Input Gain */
+ ad1843_RMGE = { 2, 4, 1 }, /* Right ADC Mic Gain Enable */
+ ad1843_RSS = { 2, 5, 3 }, /* Right ADC Source Select */
+ ad1843_LIG = { 2, 8, 4 }, /* Left ADC Input Gain */
+ ad1843_LMGE = { 2, 12, 1 }, /* Left ADC Mic Gain Enable */
+ ad1843_LSS = { 2, 13, 3 }, /* Left ADC Source Select */
+ ad1843_RD2M = { 3, 0, 5 }, /* Right DAC 2 Mix Gain/Atten */
+ ad1843_RD2MM = { 3, 7, 1 }, /* Right DAC 2 Mix Mute */
+ ad1843_LD2M = { 3, 8, 5 }, /* Left DAC 2 Mix Gain/Atten */
+ ad1843_LD2MM = { 3, 15, 1 }, /* Left DAC 2 Mix Mute */
+ ad1843_RX1M = { 4, 0, 5 }, /* Right Aux 1 Mix Gain/Atten */
+ ad1843_RX1MM = { 4, 7, 1 }, /* Right Aux 1 Mix Mute */
+ ad1843_LX1M = { 4, 8, 5 }, /* Left Aux 1 Mix Gain/Atten */
+ ad1843_LX1MM = { 4, 15, 1 }, /* Left Aux 1 Mix Mute */
+ ad1843_RX2M = { 5, 0, 5 }, /* Right Aux 2 Mix Gain/Atten */
+ ad1843_RX2MM = { 5, 7, 1 }, /* Right Aux 2 Mix Mute */
+ ad1843_LX2M = { 5, 8, 5 }, /* Left Aux 2 Mix Gain/Atten */
+ ad1843_LX2MM = { 5, 15, 1 }, /* Left Aux 2 Mix Mute */
+ ad1843_RMCM = { 7, 0, 5 }, /* Right Mic Mix Gain/Atten */
+ ad1843_RMCMM = { 7, 7, 1 }, /* Right Mic Mix Mute */
+ ad1843_LMCM = { 7, 8, 5 }, /* Left Mic Mix Gain/Atten */
+ ad1843_LMCMM = { 7, 15, 1 }, /* Left Mic Mix Mute */
+ ad1843_HPOS = { 8, 4, 1 }, /* Headphone Output Voltage Swing */
+ ad1843_HPOM = { 8, 5, 1 }, /* Headphone Output Mute */
+ ad1843_MPOM = { 8, 6, 1 }, /* Mono Output Mute */
+ ad1843_RDA1G = { 9, 0, 6 }, /* Right DAC1 Analog/Digital Gain */
+ ad1843_RDA1GM = { 9, 7, 1 }, /* Right DAC1 Analog Mute */
+ ad1843_LDA1G = { 9, 8, 6 }, /* Left DAC1 Analog/Digital Gain */
+ ad1843_LDA1GM = { 9, 15, 1 }, /* Left DAC1 Analog Mute */
+ ad1843_RDA2G = { 10, 0, 6 }, /* Right DAC2 Analog/Digital Gain */
+ ad1843_RDA2GM = { 10, 7, 1 }, /* Right DAC2 Analog Mute */
+ ad1843_LDA2G = { 10, 8, 6 }, /* Left DAC2 Analog/Digital Gain */
+ ad1843_LDA2GM = { 10, 15, 1 }, /* Left DAC2 Analog Mute */
+ ad1843_RDA1AM = { 11, 7, 1 }, /* Right DAC1 Digital Mute */
+ ad1843_LDA1AM = { 11, 15, 1 }, /* Left DAC1 Digital Mute */
+ ad1843_RDA2AM = { 12, 7, 1 }, /* Right DAC2 Digital Mute */
+ ad1843_LDA2AM = { 12, 15, 1 }, /* Left DAC2 Digital Mute */
+ ad1843_ADLC = { 15, 0, 2 }, /* ADC Left Sample Rate Source */
+ ad1843_ADRC = { 15, 2, 2 }, /* ADC Right Sample Rate Source */
+ ad1843_DA1C = { 15, 8, 2 }, /* DAC1 Sample Rate Source */
+ ad1843_DA2C = { 15, 10, 2 }, /* DAC2 Sample Rate Source */
+ ad1843_C1C = { 17, 0, 16 }, /* Clock 1 Sample Rate Select */
+ ad1843_C2C = { 20, 0, 16 }, /* Clock 2 Sample Rate Select */
+ ad1843_C3C = { 23, 0, 16 }, /* Clock 3 Sample Rate Select */
+ ad1843_DAADL = { 25, 4, 2 }, /* Digital ADC Left Source Select */
+ ad1843_DAADR = { 25, 6, 2 }, /* Digital ADC Right Source Select */
+ ad1843_DAMIX = { 25, 14, 1 }, /* DAC Digital Mix Enable */
+ ad1843_DRSFLT = { 25, 15, 1 }, /* Digital Reampler Filter Mode */
+ ad1843_ADLF = { 26, 0, 2 }, /* ADC Left Channel Data Format */
+ ad1843_ADRF = { 26, 2, 2 }, /* ADC Right Channel Data Format */
+ ad1843_ADTLK = { 26, 4, 1 }, /* ADC Transmit Lock Mode Select */
+ ad1843_SCF = { 26, 7, 1 }, /* SCLK Frequency Select */
+ ad1843_DA1F = { 26, 8, 2 }, /* DAC1 Data Format Select */
+ ad1843_DA2F = { 26, 10, 2 }, /* DAC2 Data Format Select */
+ ad1843_DA1SM = { 26, 14, 1 }, /* DAC1 Stereo/Mono Mode Select */
+ ad1843_DA2SM = { 26, 15, 1 }, /* DAC2 Stereo/Mono Mode Select */
+ ad1843_ADLEN = { 27, 0, 1 }, /* ADC Left Channel Enable */
+ ad1843_ADREN = { 27, 1, 1 }, /* ADC Right Channel Enable */
+ ad1843_AAMEN = { 27, 4, 1 }, /* Analog to Analog Mix Enable */
+ ad1843_ANAEN = { 27, 7, 1 }, /* Analog Channel Enable */
+ ad1843_DA1EN = { 27, 8, 1 }, /* DAC1 Enable */
+ ad1843_DA2EN = { 27, 9, 1 }, /* DAC2 Enable */
+ ad1843_DDMEN = { 27, 12, 1 }, /* DAC2 to DAC1 Mix Enable */
+ ad1843_C1EN = { 28, 11, 1 }, /* Clock Generator 1 Enable */
+ ad1843_C2EN = { 28, 12, 1 }, /* Clock Generator 2 Enable */
+ ad1843_C3EN = { 28, 13, 1 }, /* Clock Generator 3 Enable */
+ ad1843_PDNI = { 28, 15, 1 }; /* Converter Power Down */
+
+/*
+ * The various registers of the AD1843 use three different formats for
+ * specifying gain. The ad1843_gain structure parameterizes the
+ * formats.
+ */
+
+struct ad1843_gain {
+ int negative; /* nonzero if gain is negative. */
+ const struct ad1843_bitfield *lfield;
+ const struct ad1843_bitfield *rfield;
+};
+
+const struct ad1843_gain ad1843_gain_RECLEV = {
+ 0, &ad1843_LIG, &ad1843_RIG
+};
+const struct ad1843_gain ad1843_gain_LINE = {
+ 1, &ad1843_LX1M, &ad1843_RX1M
+};
+const struct ad1843_gain ad1843_gain_CD = {
+ 1, &ad1843_LX2M, &ad1843_RX2M
+};
+const struct ad1843_gain ad1843_gain_MIC = {
+ 1, &ad1843_LMCM, &ad1843_RMCM
+};
+const struct ad1843_gain ad1843_gain_PCM_0 = {
+ 1, &ad1843_LDA1G, &ad1843_RDA1G
+};
+const struct ad1843_gain ad1843_gain_PCM_1 = {
+ 1, &ad1843_LD2M, &ad1843_RD2M
+};
+
+const struct ad1843_gain *ad1843_gain[AD1843_GAIN_SIZE] =
+{
+ &ad1843_gain_RECLEV,
+ &ad1843_gain_LINE,
+ &ad1843_gain_CD,
+ &ad1843_gain_MIC,
+ &ad1843_gain_PCM_0,
+ &ad1843_gain_PCM_1,
+};
+
+/* read the current value of an AD1843 bitfield. */
+
+static int ad1843_read_bits(struct snd_ad1843 *ad1843,
+ const struct ad1843_bitfield *field)
+{
+ int w;
+
+ w = ad1843->read(ad1843->chip, field->reg);
+ return w >> field->lo_bit & ((1 << field->nbits) - 1);
+}
+
+/*
+ * write a new value to an AD1843 bitfield and return the old value.
+ */
+
+static int ad1843_write_bits(struct snd_ad1843 *ad1843,
+ const struct ad1843_bitfield *field,
+ int newval)
+{
+ int w, mask, oldval, newbits;
+
+ w = ad1843->read(ad1843->chip, field->reg);
+ mask = ((1 << field->nbits) - 1) << field->lo_bit;
+ oldval = (w & mask) >> field->lo_bit;
+ newbits = (newval << field->lo_bit) & mask;
+ w = (w & ~mask) | newbits;
+ ad1843->write(ad1843->chip, field->reg, w);
+
+ return oldval;
+}
+
+/*
+ * ad1843_read_multi reads multiple bitfields from the same AD1843
+ * register. It uses a single read cycle to do it. (Reading the
+ * ad1843 requires 256 bit times at 12.288 MHz, or nearly 20
+ * microseconds.)
+ *
+ * Called like this.
+ *
+ * ad1843_read_multi(ad1843, nfields,
+ * &ad1843_FIELD1, &val1,
+ * &ad1843_FIELD2, &val2, ...);
+ */
+
+static void ad1843_read_multi(struct snd_ad1843 *ad1843, int argcount, ...)
+{
+ va_list ap;
+ const struct ad1843_bitfield *fp;
+ int w = 0, mask, *value, reg = -1;
+
+ va_start(ap, argcount);
+ while (--argcount >= 0) {
+ fp = va_arg(ap, const struct ad1843_bitfield *);
+ value = va_arg(ap, int *);
+ if (reg == -1) {
+ reg = fp->reg;
+ w = ad1843->read(ad1843->chip, reg);
+ }
+
+ mask = (1 << fp->nbits) - 1;
+ *value = w >> fp->lo_bit & mask;
+ }
+ va_end(ap);
+}
+
+/*
+ * ad1843_write_multi stores multiple bitfields into the same AD1843
+ * register. It uses one read and one write cycle to do it.
+ *
+ * Called like this.
+ *
+ * ad1843_write_multi(ad1843, nfields,
+ * &ad1843_FIELD1, val1,
+ * &ad1843_FIELF2, val2, ...);
+ */
+
+static void ad1843_write_multi(struct snd_ad1843 *ad1843, int argcount, ...)
+{
+ va_list ap;
+ int reg;
+ const struct ad1843_bitfield *fp;
+ int value;
+ int w, m, mask, bits;
+
+ mask = 0;
+ bits = 0;
+ reg = -1;
+
+ va_start(ap, argcount);
+ while (--argcount >= 0) {
+ fp = va_arg(ap, const struct ad1843_bitfield *);
+ value = va_arg(ap, int);
+ if (reg == -1)
+ reg = fp->reg;
+ else
+ BUG_ON(reg != fp->reg);
+ m = ((1 << fp->nbits) - 1) << fp->lo_bit;
+ mask |= m;
+ bits |= (value << fp->lo_bit) & m;
+ }
+ va_end(ap);
+
+ if (~mask & 0xFFFF)
+ w = ad1843->read(ad1843->chip, reg);
+ else
+ w = 0;
+ w = (w & ~mask) | bits;
+ ad1843->write(ad1843->chip, reg, w);
+}
+
+/*
+ * ad1843_get_gain reads the specified register and extracts the gain value
+ * using the supplied gain type. It returns the gain in OSS format.
+ */
+
+int ad1843_get_gain(struct snd_ad1843 *ad1843, int id)
+{
+ int lg, rg;
+ const struct ad1843_gain *gp = ad1843_gain[id];
+ unsigned short mask = (1 << gp->lfield->nbits) - 1;
+
+ ad1843_read_multi(ad1843, 2, gp->lfield, &lg, gp->rfield, &rg);
+ if (gp->negative) {
+ lg = mask - lg;
+ rg = mask - rg;
+ }
+ lg = (lg * 100 + (mask >> 1)) / mask;
+ rg = (rg * 100 + (mask >> 1)) / mask;
+ return lg << 0 | rg << 8;
+}
+
+/*
+ * Set an audio channel's gain. Converts from OSS format to AD1843's
+ * format.
+ *
+ * Returns the new gain, which may be lower than the old gain.
+ */
+
+int ad1843_set_gain(struct snd_ad1843 *ad1843, int id, int newval)
+{
+ const struct ad1843_gain *gp = ad1843_gain[id];
+ unsigned short mask = (1 << gp->lfield->nbits) - 1;
+
+ int lg = newval >> 0 & 0xFF;
+ int rg = newval >> 8;
+ if (lg < 0 || lg > 100 || rg < 0 || rg > 100)
+ return -EINVAL;
+ lg = (lg * mask + (mask >> 1)) / 100;
+ rg = (rg * mask + (mask >> 1)) / 100;
+ if (gp->negative) {
+ lg = mask - lg;
+ rg = mask - rg;
+ }
+ ad1843_write_multi(ad1843, 2, gp->lfield, lg, gp->rfield, rg);
+ return ad1843_get_gain(ad1843, id);
+}
+
+/* Returns the current recording source, in OSS format. */
+
+int ad1843_get_recsrc(struct snd_ad1843 *ad1843)
+{
+ int ls = ad1843_read_bits(ad1843, &ad1843_LSS);
+
+ switch (ls) {
+ case 1:
+ return SOUND_MASK_MIC;
+ case 2:
+ return SOUND_MASK_LINE;
+ case 3:
+ return SOUND_MASK_CD;
+ case 6:
+ return SOUND_MASK_PCM;
+ default:
+ return -1;
+ }
+}
+
+/*
+ * Enable/disable digital resample mode in the AD1843.
+ *
+ * The AD1843 requires that ADL, ADR, DA1 and DA2 be powered down
+ * while switching modes. So we save DA's state, power them down,
+ * switch into/out of resample mode, power them up, and restore state.
+ *
+ * This will cause audible glitches if D/A or A/D is going on, so the
+ * driver disallows that (in mixer_write_ioctl()).
+ *
+ * The open question is, is this worth doing? I'm leaving it in,
+ * because it's written, but...
+ */
+
+void ad1843_set_resample_mode(struct snd_ad1843 *ad1843, int onoff)
+{
+ /* Save DA's mute and gain (addr 9/10 is analog gain/attenuation) */
+ int save_da1 = ad1843->read(ad1843->chip, 9);
+ int save_da2 = ad1843->read(ad1843->chip, 10);
+
+ /* Power down A/D and D/A. */
+ ad1843_write_multi(ad1843, 4,
+ &ad1843_DA1EN, 0,
+ &ad1843_DA2EN, 0,
+ &ad1843_ADLEN, 0,
+ &ad1843_ADREN, 0);
+
+ /* Switch mode */
+ ad1843_write_bits(ad1843, &ad1843_DRSFLT, onoff);
+
+ /* Power up A/D and D/A. */
+ ad1843_write_multi(ad1843, 3,
+ &ad1843_DA1EN, 1,
+ &ad1843_DA2EN, 1,
+ &ad1843_ADLEN, 1,
+ &ad1843_ADREN, 1);
+
+ /* Restore DA's mute and gain. */
+ ad1843->write(ad1843->chip, 9, save_da1);
+ ad1843->write(ad1843->chip, 10, save_da2);
+}
+
+/*
+ * Set recording source. Arg newsrc specifies an OSS channel mask.
+ *
+ * The complication is that when we switch into/out of loopback mode
+ * (i.e., src = SOUND_MASK_PCM), we change the AD1843 into/out of
+ * digital resampling mode.
+ *
+ * Returns newsrc on success, -errno on failure.
+ */
+
+int ad1843_set_recsrc(struct snd_ad1843 *ad1843, int newsrc)
+{
+ int bits;
+ int oldbits;
+
+ switch (newsrc) {
+ case SOUND_MASK_PCM:
+ bits = 6;
+ break;
+
+ case SOUND_MASK_MIC:
+ bits = 1;
+ break;
+
+ case SOUND_MASK_LINE:
+ bits = 2;
+ break;
+
+ case SOUND_MASK_CD:
+ bits = 3;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+ oldbits = ad1843_read_bits(ad1843, &ad1843_LSS);
+ if (newsrc == SOUND_MASK_PCM && oldbits != 6) {
+
+ ad1843_set_resample_mode(ad1843, 1);
+ ad1843_write_multi(ad1843, 2,
+ &ad1843_DAADL, 2,
+ &ad1843_DAADR, 2);
+ } else if (newsrc != SOUND_MASK_PCM && oldbits == 6) {
+
+ ad1843_set_resample_mode(ad1843, 0);
+ ad1843_write_multi(ad1843, 2,
+ &ad1843_DAADL, 0,
+ &ad1843_DAADR, 0);
+ }
+ ad1843_write_multi(ad1843, 2, &ad1843_LSS, bits, &ad1843_RSS, bits);
+ return newsrc;
+}
+
+/*
+ * Return current output sources, in OSS format.
+ */
+
+int ad1843_get_outsrc(struct snd_ad1843 *ad1843)
+{
+ int pcm, line, mic, cd;
+
+ pcm = ad1843_read_bits(ad1843, &ad1843_LDA1GM) ? 0 : SOUND_MASK_PCM;
+ line = ad1843_read_bits(ad1843, &ad1843_LX1MM) ? 0 : SOUND_MASK_LINE;
+ cd = ad1843_read_bits(ad1843, &ad1843_LX2MM) ? 0 : SOUND_MASK_CD;
+ mic = ad1843_read_bits(ad1843, &ad1843_LMCMM) ? 0 : SOUND_MASK_MIC;
+
+ return pcm | line | cd | mic;
+}
+
+/*
+ * Set output sources. Arg is a mask of active sources in OSS format.
+ *
+ * Returns source mask on success, -errno on failure.
+ */
+
+int ad1843_set_outsrc(struct snd_ad1843 *ad1843, int mask)
+{
+ int pcm, line, mic, cd;
+
+ if (mask & ~(SOUND_MASK_PCM | SOUND_MASK_LINE |
+ SOUND_MASK_CD | SOUND_MASK_MIC))
+ return -EINVAL;
+ pcm = (mask & SOUND_MASK_PCM) ? 0 : 1;
+ line = (mask & SOUND_MASK_LINE) ? 0 : 1;
+ mic = (mask & SOUND_MASK_MIC) ? 0 : 1;
+ cd = (mask & SOUND_MASK_CD) ? 0 : 1;
+
+ ad1843_write_multi(ad1843, 2, &ad1843_LDA1GM, pcm, &ad1843_RDA1GM, pcm);
+ ad1843_write_multi(ad1843, 2, &ad1843_LX1MM, line, &ad1843_RX1MM, line);
+ ad1843_write_multi(ad1843, 2, &ad1843_LX2MM, cd, &ad1843_RX2MM, cd);
+ ad1843_write_multi(ad1843, 2, &ad1843_LMCMM, mic, &ad1843_RMCMM, mic);
+
+ return mask;
+}
+
+/* Setup ad1843 for D/A conversion. */
+
+void ad1843_setup_dac(struct snd_ad1843 *ad1843,
+ unsigned int id,
+ unsigned int framerate,
+ snd_pcm_format_t fmt,
+ unsigned int channels)
+{
+ int ad_fmt = 0, ad_mode = 0;
+
+ switch (fmt) {
+ case SNDRV_PCM_FORMAT_S8:
+ ad_fmt = 0;
+ break;
+ case SNDRV_PCM_FORMAT_U8:
+ ad_fmt = 0;
+ break;
+ case SNDRV_PCM_FORMAT_S16_LE:
+ ad_fmt = 1;
+ break;
+ case SNDRV_PCM_FORMAT_MU_LAW:
+ ad_fmt = 2;
+ break;
+ case SNDRV_PCM_FORMAT_A_LAW:
+ ad_fmt = 3;
+ break;
+ default:
+ break;
+ }
+
+ switch (channels) {
+ case 2:
+ ad_mode = 0;
+ break;
+ case 1:
+ ad_mode = 1;
+ break;
+ default:
+ break;
+ }
+
+ if (id) {
+ ad1843_write_bits(ad1843, &ad1843_C2C, framerate);
+ ad1843_write_multi(ad1843, 2,
+ &ad1843_DA2SM, ad_mode,
+ &ad1843_DA2F, ad_fmt);
+ } else {
+ ad1843_write_bits(ad1843, &ad1843_C1C, framerate);
+ ad1843_write_multi(ad1843, 2,
+ &ad1843_DA1SM, ad_mode,
+ &ad1843_DA1F, ad_fmt);
+ }
+}
+
+void ad1843_shutdown_dac(struct snd_ad1843 *ad1843, unsigned int id)
+{
+ if (id)
+ ad1843_write_bits(ad1843, &ad1843_DA2F, 1);
+ else
+ ad1843_write_bits(ad1843, &ad1843_DA1F, 1);
+}
+
+void ad1843_setup_adc(struct snd_ad1843 *ad1843,
+ unsigned int framerate,
+ snd_pcm_format_t fmt,
+ unsigned int channels)
+{
+ int da_fmt = 0;
+
+ switch (fmt) {
+ case SNDRV_PCM_FORMAT_S8: da_fmt = 0; break;
+ case SNDRV_PCM_FORMAT_U8: da_fmt = 0; break;
+ case SNDRV_PCM_FORMAT_S16_LE: da_fmt = 1; break;
+ case SNDRV_PCM_FORMAT_MU_LAW: da_fmt = 2; break;
+ case SNDRV_PCM_FORMAT_A_LAW: da_fmt = 3; break;
+ default: break;
+ }
+
+ ad1843_write_bits(ad1843, &ad1843_C3C, framerate);
+ ad1843_write_multi(ad1843, 2,
+ &ad1843_ADLF, da_fmt, &ad1843_ADRF, da_fmt);
+}
+
+void ad1843_shutdown_adc(struct snd_ad1843 *ad1843)
+{
+ /* nothing to do */
+}
+
+/*
+ * Fully initialize the ad1843. As described in the AD1843 data
+ * sheet, section "START-UP SEQUENCE". The numbered comments are
+ * subsection headings from the data sheet. See the data sheet, pages
+ * 52-54, for more info.
+ *
+ * return 0 on success, -errno on failure. */
+
+int ad1843_init(struct snd_ad1843 *ad1843)
+{
+ unsigned long later;
+
+ if (ad1843_read_bits(ad1843, &ad1843_INIT) != 0) {
+ printk(KERN_ERR "ad1843: AD1843 won't initialize\n");
+ return -EIO;
+ }
+
+ ad1843_write_bits(ad1843, &ad1843_SCF, 1);
+
+ /* 4. Put the conversion resources into standby. */
+ ad1843_write_bits(ad1843, &ad1843_PDNI, 0);
+ later = jiffies + HZ / 2; /* roughly half a second */
+
+ while (ad1843_read_bits(ad1843, &ad1843_PDNO)) {
+ if (time_after(jiffies, later)) {
+ printk(KERN_ERR
+ "ad1843: AD1843 won't power up\n");
+ return -EIO;
+ }
+ schedule();
+ }
+
+ /* 5. Power up the clock generators and enable clock output pins. */
+ ad1843_write_multi(ad1843, 3,
+ &ad1843_C1EN, 1,
+ &ad1843_C2EN, 1,
+ &ad1843_C3EN, 1);
+
+ /* 6. Configure conversion resources while they are in standby. */
+
+ /* DAC1/2 use clock 1/2 as source, ADC uses clock 3. Always. */
+ ad1843_write_multi(ad1843, 4,
+ &ad1843_DA1C, 1,
+ &ad1843_DA2C, 2,
+ &ad1843_ADLC, 3,
+ &ad1843_ADRC, 3);
+
+ /* 7. Enable conversion resources. */
+ ad1843_write_bits(ad1843, &ad1843_ADTLK, 1);
+ ad1843_write_multi(ad1843, 7,
+ &ad1843_ANAEN, 1,
+ &ad1843_AAMEN, 1,
+ &ad1843_DA1EN, 1,
+ &ad1843_DA2EN, 1,
+ &ad1843_DDMEN, 1,
+ &ad1843_ADLEN, 1,
+ &ad1843_ADREN, 1);
+
+ /* 8. Configure conversion resources while they are enabled. */
+
+ /* Unmute all channels. */
+
+ ad1843_set_outsrc(ad1843,
+ (SOUND_MASK_PCM | SOUND_MASK_LINE |
+ SOUND_MASK_MIC | SOUND_MASK_CD));
+ ad1843_write_multi(ad1843, 2,
+ &ad1843_LDA1AM, 0,
+ &ad1843_RDA1AM, 0);
+ ad1843_write_multi(ad1843, 2,
+ &ad1843_LD2MM, 0,
+ &ad1843_RD2MM, 0);
+
+ /* Set default recording source to Line In and set
+ * mic gain to +20 dB.
+ */
+ ad1843_set_recsrc(ad1843, SOUND_MASK_LINE);
+ ad1843_write_multi(ad1843, 2, &ad1843_LMGE, 1, &ad1843_RMGE, 1);
+
+ /* Set Speaker Out level to +/- 4V and unmute it. */
+ ad1843_write_multi(ad1843, 3,
+ &ad1843_HPOS, 1,
+ &ad1843_HPOM, 0,
+ &ad1843_MPOM, 0);
+
+ return 0;
+}
diff --git a/sound/mips/sgio2audio.c b/sound/mips/sgio2audio.c
new file mode 100644
index 0000000..e77577d
--- /dev/null
+++ b/sound/mips/sgio2audio.c
@@ -0,0 +1,730 @@
+/*
+ * Sound driver for Silicon Graphics O2 Workstations A/V board audio.
+ *
+ * Copyright 2003 Vivien Chappelier <vivien.chappelier@linux-mips.org>
+ *
+ * INCOMPLETE:
+ * - finish PCM,
+ * . recording
+ * - mixer and controls
+ * - /proc interface
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/gfp.h>
+#include <linux/vmalloc.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <asm/ip32/ip32_ints.h>
+#include <asm/ip32/mace.h>
+
+#include <sound/core.h>
+#include <sound/control.h>
+#include <sound/pcm.h>
+#define SNDRV_GET_ID
+#include <sound/initval.h>
+#include <sound/ad1843.h>
+
+
+MODULE_AUTHOR("Vivien Chappelier <vivien.chappelier@linux-mips.org>");
+MODULE_DESCRIPTION("SGI O2 Audio");
+MODULE_LICENSE("GPL");
+MODULE_SUPPORTED_DEVICE("{{Silicon Graphics, O2 Audio}}");
+
+
+#define SGIO2AUDIO_MAX_VOLUME 1000
+
+#define AUDIO_CONTROL_RESET BIT(0) /* 1: reset audio interface */
+#define AUDIO_CONTROL_CODEC_PRESENT BIT(1) /* 1: codec detected */
+/* 2-8 : channel 1 write ptr alias */
+/* 9-15 : channel 2 read ptr alias */
+/* 16-22 : channel 3 read ptr alias */
+#define AUDIO_CONTROL_VOLUME_BUTTON_UP BIT(23) /* latched volume button */
+#define AUDIO_CONTROL_VOLUME_BUTTON_DOWN BIT(24) /* latched volume button */
+
+#define CODEC_CONTROL_WORD_SHIFT 0
+#define CODEC_CONTROL_WORD_MASK ((1 << 16) - 1)
+#define CODEC_CONTROL_READ BIT(16)
+#define CODEC_CONTROL_ADDRESS_SHIFT 17
+#define CODEC_CONTROL_ADDRESS_MASK ((1 << 7) - 1)
+
+#define CHANNEL_PTR_SHIFT 5
+#define CHANNEL_PTR_MASK ((1 << 6) - 1)
+#define CHANNEL_CONTROL_RESET BIT(10) /* 1: reset channel */
+#define CHANNEL_DMA_ENABLE BIT(9) /* 1: enable DMA transfer */
+#define CHANNEL_INT_THRESHOLD_DISABLED (0 << 5) /* interrupt disabled */
+#define CHANNEL_INT_THRESHOLD_25 (1 << 5) /* int on buffer >25% full */
+#define CHANNEL_INT_THRESHOLD_50 (2 << 5) /* int on buffer >50% full */
+#define CHANNEL_INT_THRESHOLD_75 (3 << 5) /* int on buffer >75% full */
+#define CHANNEL_INT_THRESHOLD_EMPTY (4 << 5) /* int on buffer empty */
+#define CHANNEL_INT_THRESHOLD_NOT_EMPTY (5 << 5) /* int on buffer !empty */
+#define CHANNEL_INT_THRESHOLD_FULL (6 << 5) /* int on buffer empty */
+#define CHANNEL_INT_THRESHOLD_NOT_FULL (7 << 5) /* int on buffer !empty */
+
+#define CHANNEL_IN_BASE (0 << 12)
+#define CHANNEL_OUT1_BASE (1 << 12)
+#define CHANNEL_OUT2_BASE (2 << 12)
+
+#define CHANNEL_RING_SHIFT 12
+#define CHANNEL_RING_SIZE (1 << CHANNEL_RING_SHIFT)
+#define CHANNEL_RING_MASK (CHANNEL_RING_SIZE - 1)
+
+#define CHANNEL_LEFT_SHIFT 40
+#define CHANNEL_RIGHT_SHIFT 8
+
+struct snd_sgio2audio_chan {
+ int idx;
+ struct snd_pcm_substream *substream;
+ void *buffer;
+ unsigned int pos;
+ snd_pcm_uframes_t size;
+ spinlock_t lock;
+ int opened;
+};
+
+/* definition of the chip-specific record */
+struct snd_sgio2audio {
+ struct snd_card *card;
+
+ struct snd_pcm *pcm;
+
+ /* codec */
+ struct snd_ad1843 *ad1843;
+ spinlock_t ad1843_lock;
+
+ /* channels */
+ struct snd_sgio2audio_chan channel[3];
+
+ /* properties */
+ int volume;
+ snd_pcm_format_t format;
+
+ /* resources */
+ void *ring_base;
+ dma_addr_t ring_base_dma;
+ int irq_start;
+ int irq_end;
+};
+
+/* PCM hardware definition */
+static struct snd_pcm_hardware snd_sgio2audio_playback_hw = {
+ .info = (SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER),
+ .formats = SNDRV_PCM_FMTBIT_S16_BE,
+ .rates = SNDRV_PCM_RATE_8000_48000,
+ .rate_min = 8000,
+ .rate_max = 48000,
+ .channels_min = 2,
+ .channels_max = 2,
+ .buffer_bytes_max = 65536,
+ .period_bytes_min = 32768,
+ .period_bytes_max = 65536,
+ .periods_min = 1,
+ .periods_max = 1024,
+};
+
+/* AD1843 access */
+
+/*
+ * read_ad1843_reg returns the current contents of a 16 bit AD1843 register.
+ *
+ * Returns unsigned register value on success, -errno on failure.
+ */
+static int read_ad1843_reg(void *priv, int reg)
+{
+ struct snd_sgio2audio *chip = priv;
+ int val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&chip->ad1843_lock, flags);
+
+ writeq((reg << CODEC_CONTROL_ADDRESS_SHIFT) |
+ CODEC_CONTROL_READ, &mace->perif.audio.codec_control);
+ wmb();
+ val = readq(&mace->perif.audio.codec_control); /* flush bus */
+ udelay(200);
+
+ val = readq(&mace->perif.audio.codec_read);
+
+ spin_unlock_irqrestore(&chip->ad1843_lock, flags);
+ return val;
+}
+
+/*
+ * write_ad1843_reg writes the specified value to a 16 bit AD1843 register.
+ */
+static int write_ad1843_reg(void *priv, int reg, int word)
+{
+ struct snd_sgio2audio *chip = priv;
+ int val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&chip->ad1843_lock, flags);
+
+ writeq((reg << CODEC_CONTROL_ADDRESS_SHIFT) |
+ (word << CODEC_CONTROL_WORD_SHIFT),
+ &mace->perif.audio.codec_control);
+ wmb();
+ val = readq(&mace->perif.audio.codec_control); /* flush bus */
+ udelay(200);
+
+ spin_unlock_irqrestore(&chip->ad1843_lock, flags);
+ return 0;
+}
+
+static struct snd_ad1843 ad1843_ops = {
+ NULL, /* initialized in snd_sgio2_audio_create */
+ read_ad1843_reg,
+ write_ad1843_reg,
+};
+
+/* low-level audio interface DMA */
+
+/* put some DMA data in bounce buffer, count must be a multiple of 32 */
+/* returns 1 if a period has elapsed */
+static int snd_sgio2audio_dma_push_frag(struct snd_sgio2audio *chip,
+ unsigned int ch, unsigned int count)
+{
+ int ret;
+ s64 l, r;
+ unsigned long dst_base, dst_pos;
+ unsigned long src_base, src_pos, src_mask;
+ u64 *dst;
+ s16 *src;
+ unsigned long flags;
+ struct snd_pcm_runtime *runtime = chip->channel[ch].substream->runtime;
+
+ spin_lock_irqsave(&chip->channel[ch].lock, flags);
+
+ dst_base = (unsigned long) chip->ring_base | (ch << CHANNEL_RING_SHIFT);
+ dst_pos = readq(&mace->perif.audio.chan[ch].write_ptr);
+ src_base = (unsigned long) chip->channel[ch].buffer;
+ src_pos = (unsigned long) chip->channel[ch].pos;
+ src_mask = frames_to_bytes(runtime, runtime->buffer_size) - 1;
+
+ /* check if a period has elapsed */
+ chip->channel[ch].size += (count >> 3); /* in frames */
+ ret = chip->channel[ch].size >= runtime->period_size;
+ chip->channel[ch].size %= runtime->period_size;
+
+ while (count) {
+ src = (s16 *)(src_base + src_pos);
+ dst = (u64 *)(dst_base + dst_pos);
+
+ l = src[0]; /* sign extend */
+ r = src[1]; /* sign extend */
+
+ *dst = ((l & 0x00ffffff) << CHANNEL_LEFT_SHIFT) |
+ ((r & 0x00ffffff) << CHANNEL_RIGHT_SHIFT);
+
+ dst_pos = (dst_pos + sizeof(u64)) & CHANNEL_RING_MASK;
+ src_pos = (src_pos + 2 * sizeof(s16)) & src_mask;
+ count -= sizeof(u64);
+ }
+
+ writeq(dst_pos, &mace->perif.audio.chan[ch].write_ptr); /* in bytes */
+ chip->channel[ch].pos = src_pos;
+
+ spin_unlock_irqrestore(&chip->channel[ch].lock, flags);
+ return ret;
+}
+
+static int snd_sgio2audio_dma_start(struct snd_pcm_substream *substream)
+{
+ struct snd_sgio2audio *chip = snd_pcm_substream_chip(substream);
+ struct snd_sgio2audio_chan *chan = substream->runtime->private_data;
+ int ch = chan->idx;
+
+ /* reset DMA channel */
+ writeq(CHANNEL_CONTROL_RESET, &mace->perif.audio.chan[ch].control);
+ udelay(10);
+ writeq(0, &mace->perif.audio.chan[ch].control);
+
+ /* push a full buffer */
+ snd_sgio2audio_dma_push_frag(chip, ch, CHANNEL_RING_SIZE - 32);
+
+ /* set DMA to wake on 50% empty and enable interrupt */
+ writeq(CHANNEL_DMA_ENABLE | CHANNEL_INT_THRESHOLD_50,
+ &mace->perif.audio.chan[ch].control);
+ return 0;
+}
+
+static int snd_sgio2audio_dma_stop(struct snd_pcm_substream *substream)
+{
+ struct snd_sgio2audio_chan *chan = substream->runtime->private_data;
+
+ writeq(0, &mace->perif.audio.chan[chan->idx].control);
+ return 0;
+}
+
+static void snd_sgio2audio_dma_interrupt(struct snd_sgio2audio *chip, int ch)
+{
+ struct snd_pcm_substream *substream = chip->channel[ch].substream;
+ int count;
+
+ /* fill the ring */
+ count = CHANNEL_RING_SIZE -
+ readq(&mace->perif.audio.chan[ch].depth) - 32;
+ if (snd_sgio2audio_dma_push_frag(chip, ch, count))
+ snd_pcm_period_elapsed(substream);
+}
+
+static irqreturn_t snd_sgio2audio_interrupt(int irq, void *dev_id)
+{
+ struct snd_sgio2audio *chip = dev_id;
+ unsigned long status;
+
+ switch (irq) {
+ /* volume changed */
+ case MACEISA_AUDIO_SC_IRQ:
+ status = readq(&mace->perif.audio.control);
+ if (status & AUDIO_CONTROL_VOLUME_BUTTON_UP) {
+ status &= ~AUDIO_CONTROL_VOLUME_BUTTON_UP;
+ writeq(status, &mace->perif.audio.control);
+ if (chip->volume < SGIO2AUDIO_MAX_VOLUME)
+ chip->volume++;
+ }
+ if (status & AUDIO_CONTROL_VOLUME_BUTTON_DOWN) {
+ status &= ~AUDIO_CONTROL_VOLUME_BUTTON_DOWN;
+ writeq(status, &mace->perif.audio.control);
+ if (chip->volume > 0)
+ chip->volume--;
+ }
+ /* program AD1843 with the new volume */
+ ad1843_set_gain(chip->ad1843, AD1843_GAIN_PCM_0,
+ chip->volume / 10);
+ ad1843_set_gain(chip->ad1843, AD1843_GAIN_PCM_1,
+ chip->volume / 10);
+ break;
+
+ /* dma ring ready */
+ case MACEISA_AUDIO1_DMAT_IRQ:
+ snd_sgio2audio_dma_interrupt(chip, 0);
+ break;
+ case MACEISA_AUDIO2_DMAT_IRQ:
+ snd_sgio2audio_dma_interrupt(chip, 1);
+ break;
+ case MACEISA_AUDIO3_DMAT_IRQ:
+ snd_sgio2audio_dma_interrupt(chip, 2);
+ break;
+ default:
+ printk(KERN_ERR "sgio2audio: unhandled interrupt %d\n", irq);
+ /* TEMP : stop DMA */
+ writeq(0, &mace->perif.audio.chan[0].control);
+ writeq(0, &mace->perif.audio.chan[1].control);
+ writeq(0, &mace->perif.audio.chan[2].control);
+ break;
+ }
+ return IRQ_HANDLED;
+}
+
+/* PCM part */
+
+/* PCM playback open callback */
+static int snd_sgio2audio_playback_open(struct snd_pcm_substream *substream)
+{
+ struct snd_sgio2audio *chip = snd_pcm_substream_chip(substream);
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ int i;
+
+ for (i = 1; i < 3; i++)
+ if (!chip->channel[i].opened) {
+ chip->channel[i].opened = 1;
+ runtime->hw = snd_sgio2audio_playback_hw;
+ runtime->private_data = &chip->channel[i];
+ return 0;
+ }
+
+ return -ENOMEM;
+}
+
+/* PCM playback close callback */
+static int snd_sgio2audio_playback_close(struct snd_pcm_substream *substream)
+{
+ struct snd_sgio2audio *chip = snd_pcm_substream_chip(substream);
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct snd_sgio2audio_chan *chan = substream->runtime->private_data;
+
+ chip->channel[chan->idx].opened = 0;
+ runtime->private_data = NULL;
+
+ /* TODO: hardware code */
+ return 0;
+}
+
+/* PCM capture open callback */
+static int snd_sgio2audio_capture_open(struct snd_pcm_substream *substream)
+{
+ struct snd_sgio2audio *chip = snd_pcm_substream_chip(substream);
+ struct snd_pcm_runtime *runtime = substream->runtime;
+
+ runtime->hw = snd_sgio2audio_playback_hw;
+
+ /* initialize AD1843 */
+ ad1843_init(chip->ad1843);
+
+ return 0;
+}
+
+/* PCM capture close callback */
+static int snd_sgio2audio_capture_close(struct snd_pcm_substream *substream)
+{
+ return 0;
+}
+
+
+/* hw_params callback */
+static int snd_sgio2audio_pcm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *hw_params)
+{
+ /* alloc virtual 'dma' area */
+ if (substream->runtime->dma_area)
+ vfree(substream->runtime->dma_area);
+ substream->runtime->dma_area = vmalloc(params_buffer_bytes(hw_params));
+ if (substream->runtime->dma_area == NULL)
+ return -ENOMEM;
+ return 0;
+}
+
+/* hw_free callback */
+static int snd_sgio2audio_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+ if (substream->runtime->dma_area)
+ vfree(substream->runtime->dma_area);
+ substream->runtime->dma_area = NULL;
+ return 0;
+}
+
+/* prepare callback */
+static int snd_sgio2audio_pcm_prepare(struct snd_pcm_substream *substream)
+{
+ struct snd_sgio2audio *chip = snd_pcm_substream_chip(substream);
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct snd_sgio2audio_chan *chan = substream->runtime->private_data;
+ int ch = chan->idx;
+ unsigned long flags;
+
+ spin_lock_irqsave(&chip->channel[ch].lock, flags);
+
+ /* Setup the pseudo-dma transfer pointers. */
+ chip->channel[ch].buffer = runtime->dma_area;
+ chip->channel[ch].pos = 0;
+ chip->channel[ch].size = 0;
+ chip->channel[ch].substream = substream;
+
+ /* set AD1843 format */
+ /* hardware format is always S16_LE */
+ switch (substream->stream) {
+ case SNDRV_PCM_STREAM_PLAYBACK:
+ ad1843_setup_dac(chip->ad1843,
+ ch - 1,
+ runtime->rate,
+ SNDRV_PCM_FORMAT_S16_LE,
+ runtime->channels);
+ break;
+ case SNDRV_PCM_STREAM_CAPTURE:
+ ad1843_setup_adc(chip->ad1843,
+ runtime->rate,
+ SNDRV_PCM_FORMAT_S16_LE,
+ runtime->channels);
+ break;
+ }
+ spin_unlock_irqrestore(&chip->channel[ch].lock, flags);
+ return 0;
+}
+
+/* trigger callback */
+static int snd_sgio2audio_pcm_trigger(struct snd_pcm_substream *substream,
+ int cmd)
+{
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ /* start the PCM engine */
+ snd_sgio2audio_dma_start(substream);
+ break;
+ case SNDRV_PCM_TRIGGER_STOP:
+ /* stop the PCM engine */
+ snd_sgio2audio_dma_stop(substream);
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/* pointer callback */
+static snd_pcm_uframes_t
+snd_sgio2audio_pcm_pointer(struct snd_pcm_substream *substream)
+{
+ struct snd_sgio2audio *chip = snd_pcm_substream_chip(substream);
+ struct snd_sgio2audio_chan *chan = substream->runtime->private_data;
+
+ /* get the current hardware pointer */
+ return bytes_to_frames(substream->runtime,
+ chip->channel[chan->idx].pos);
+}
+
+/* get the physical page pointer on the given offset */
+static struct page *snd_sgio2audio_page(struct snd_pcm_substream *substream,
+ unsigned long offset)
+{
+ return vmalloc_to_page(substream->runtime->dma_area + offset);
+}
+
+/* operators */
+static struct snd_pcm_ops snd_sgio2audio_playback_ops = {
+ .open = snd_sgio2audio_playback_open,
+ .close = snd_sgio2audio_playback_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = snd_sgio2audio_pcm_hw_params,
+ .hw_free = snd_sgio2audio_pcm_hw_free,
+ .prepare = snd_sgio2audio_pcm_prepare,
+ .trigger = snd_sgio2audio_pcm_trigger,
+ .pointer = snd_sgio2audio_pcm_pointer,
+ .page = snd_sgio2audio_page,
+};
+
+static struct snd_pcm_ops snd_sgio2audio_capture_ops = {
+ .open = snd_sgio2audio_capture_open,
+ .close = snd_sgio2audio_capture_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = snd_sgio2audio_pcm_hw_params,
+ .hw_free = snd_sgio2audio_pcm_hw_free,
+ .prepare = snd_sgio2audio_pcm_prepare,
+ .trigger = snd_sgio2audio_pcm_trigger,
+ .pointer = snd_sgio2audio_pcm_pointer,
+ .page = snd_sgio2audio_page,
+};
+
+/*
+ * definitions of capture are omitted here...
+ */
+
+/* create a pcm device */
+static int __devinit snd_sgio2audio_new_pcm(struct snd_sgio2audio *chip)
+{
+ struct snd_pcm *pcm;
+ int err;
+
+ /* create a new pcm device with two outputs and one input */
+ err = snd_pcm_new(chip->card, "SGI O2 Audio", 0, 2, 1, &pcm);
+ if (err < 0)
+ return err;
+
+ pcm->private_data = chip;
+ strcpy(pcm->name, "SGI O2 Audio");
+ chip->pcm = pcm;
+
+ /* set operators */
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
+ &snd_sgio2audio_playback_ops);
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE,
+ &snd_sgio2audio_capture_ops);
+ return 0;
+}
+
+/* ALSA driver */
+
+static int snd_sgio2audio_free(struct snd_sgio2audio *chip)
+{
+ int irq;
+
+ /* reset interface */
+ writeq(AUDIO_CONTROL_RESET, &mace->perif.audio.control);
+ udelay(1);
+ writeq(0, &mace->perif.audio.control);
+
+ /* release IRQ's */
+ for (irq = MACEISA_AUDIO_SW_IRQ; irq <= MACEISA_AUDIO3_MERR_IRQ; irq++)
+ free_irq(irq, chip);
+
+ dma_free_coherent(NULL, MACEISA_RINGBUFFERS_SIZE,
+ chip->ring_base, chip->ring_base_dma);
+
+ /* release card data */
+ kfree(chip);
+ return 0;
+}
+
+static int snd_sgio2audio_dev_free(struct snd_device *device)
+{
+ struct snd_sgio2audio *chip = device->device_data;
+ /* TODO: component destructor */
+ return snd_sgio2audio_free(chip);
+}
+
+static struct snd_device_ops ops = {
+ .dev_free = snd_sgio2audio_dev_free,
+};
+
+static int __devinit snd_sgio2audio_create(struct snd_card *card,
+ struct snd_sgio2audio **rchip)
+{
+ struct snd_sgio2audio *chip;
+ int i, err, irq;
+
+ *rchip = NULL;
+
+ /* check if a codec is attached to the interface */
+ /* (Audio or Audio/Video board present) */
+ if (!(readq(&mace->perif.audio.control) & AUDIO_CONTROL_CODEC_PRESENT))
+ return -ENOENT;
+
+ chip = kzalloc(sizeof(struct snd_sgio2audio), GFP_KERNEL);
+ if (chip == NULL)
+ return -ENOMEM;
+
+ chip->card = card;
+ chip->irq_start = MACEISA_AUDIO_SW_IRQ;
+ chip->irq_end = MACEISA_AUDIO3_MERR_IRQ;
+
+ chip->ring_base = dma_alloc_coherent(NULL, MACEISA_RINGBUFFERS_SIZE,
+ &chip->ring_base_dma, GFP_USER);
+ if (chip->ring_base == NULL) {
+ printk(KERN_ERR
+ "sgio2audio: could not allocate ring buffers\n");
+ kfree(chip);
+ return -ENOMEM;
+ }
+
+ spin_lock_init(&chip->ad1843_lock);
+
+ chip->volume = SGIO2AUDIO_MAX_VOLUME;
+
+ /* initialize channels */
+ for (i = 0; i < 3; i++) {
+ spin_lock_init(&chip->channel[i].lock);
+ chip->channel[i].idx = i;
+ }
+
+ /* allocate IRQs */
+ for (irq = chip->irq_start; irq <= chip->irq_end; irq++) {
+ if (request_irq(irq, snd_sgio2audio_interrupt,
+ IRQF_SHARED, "SGI O2 Audio",
+ (void *)chip)) {
+ snd_sgio2audio_free(chip);
+ printk(KERN_ERR
+ "sgio2audio: cannot allocate irq %d\n", irq);
+ return -EBUSY;
+ }
+ }
+
+ /* reset the interface */
+ writeq(AUDIO_CONTROL_RESET, &mace->perif.audio.control);
+ udelay(1);
+ writeq(0, &mace->perif.audio.control);
+ udelay(100); /* give time to recover */
+
+ /* set ring base */
+ writeq(chip->ring_base_dma, &mace->perif.ctrl.ringbase);
+
+ /* attach the AD1843 codec */
+ chip->ad1843 = &ad1843_ops;
+ chip->ad1843->chip = (void *) chip;
+
+ /* initialize the AD1843 codec */
+ err = ad1843_init(chip->ad1843);
+ if (err < 0) {
+ snd_sgio2audio_free(chip);
+ return err;
+ }
+
+ err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
+ if (err < 0) {
+ snd_sgio2audio_free(chip);
+ return err;
+ }
+ *rchip = chip;
+ return 0;
+}
+
+static int __devinit snd_sgio2audio_probe(struct platform_device *pdev)
+{
+ struct snd_card *card;
+ struct snd_sgio2audio *chip;
+ int err;
+
+ card = snd_card_new(0, 0, THIS_MODULE, 0);
+ if (card == NULL)
+ return -ENOMEM;
+
+ err = snd_sgio2audio_create(card, &chip);
+ if (err < 0) {
+ snd_card_free(card);
+ return err;
+ }
+
+ /* TODO : finish PCM, do mixer and /proc */
+ err = snd_sgio2audio_new_pcm(chip);
+ if (err < 0) {
+ snd_card_free(card);
+ return err;
+ }
+
+ strcpy(card->driver, "SGI O2 Audio");
+ strcpy(card->shortname, "SGI O2 Audio");
+ sprintf(card->longname, "%s irq %i-%i",
+ card->shortname,
+ chip->irq_start, chip->irq_end);
+
+ err = snd_card_register(card);
+ if (err < 0) {
+ snd_card_free(card);
+ return err;
+ }
+ platform_set_drvdata(pdev, card);
+ return 0;
+}
+
+static int __exit snd_sgio2audio_remove(struct platform_device *pdev)
+{
+ struct snd_card *card = platform_get_drvdata(pdev);
+
+ snd_card_free(card);
+ platform_set_drvdata(pdev, NULL);
+ return 0;
+}
+
+static struct platform_driver sgio2audio_driver = {
+ .probe = snd_sgio2audio_probe,
+ .remove = __devexit_p(snd_sgio2audio_remove),
+ .driver = {
+ .name = "sgio2audio",
+ .owner = THIS_MODULE,
+ }
+};
+
+static int __init alsa_card_sgio2audio_init(void)
+{
+ return platform_driver_register(&sgio2audio_driver);
+}
+
+static void __exit alsa_card_sgio2audio_exit(void)
+{
+ platform_driver_unregister(&sgio2audio_driver);
+}
+
+module_init(alsa_card_sgio2audio_init)
+module_exit(alsa_card_sgio2audio_exit)
--
Crap can work. Given enough thrust pigs will fly, but it's not necessary a
good idea. [ RFC1925, 2.3 ]
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: SGI O2 sound driver v4
2008-06-28 22:45 ` Thomas Bogendoerfer
@ 2008-06-29 22:35 ` Thomas Bogendoerfer
2008-07-02 23:21 ` Thomas Bogendoerfer
0 siblings, 1 reply; 8+ messages in thread
From: Thomas Bogendoerfer @ 2008-06-29 22:35 UTC (permalink / raw)
To: linux-mips
On Sun, Jun 29, 2008 at 12:45:53AM +0200, Thomas Bogendoerfer wrote:
> [...]
changes in v4:
- added control
- added capture support (no idea, if it is correct, yet)
I'm on a buissness trip the next two days, so I'm not able to work on
the driver. Here is a short TODO:
- test capture and fix bugs
- switch over to use S24_BE (didn't work the first time I checked it)
- rewrite dma_push/dma_pull functions after switching for S24_BE
- maybe more controls
- rip out button support and write input driver for it
- add dma error interrupt handling
- check spinlock usage
- use atomic_test_set for pcm open stuff
Thomas.
arch/mips/sgi-ip32/ip32-platform.c | 18 +
include/sound/ad1843.h | 45 ++
sound/mips/Kconfig | 6 +
sound/mips/Makefile | 2 +
sound/mips/ad1843.c | 545 +++++++++++++++++++
sound/mips/sgio2audio.c | 1034 ++++++++++++++++++++++++++++++++++++
6 files changed, 1650 insertions(+), 0 deletions(-)
diff --git a/arch/mips/sgi-ip32/ip32-platform.c b/arch/mips/sgi-ip32/ip32-platform.c
index 89a71f4..8b624b9 100644
--- a/arch/mips/sgi-ip32/ip32-platform.c
+++ b/arch/mips/sgi-ip32/ip32-platform.c
@@ -65,6 +65,24 @@ static __init int meth_devinit(void)
device_initcall(meth_devinit);
+static __init int sgio2audio_devinit(void)
+{
+ struct platform_device *pd;
+ int ret;
+
+ pd = platform_device_alloc("sgio2audio", -1);
+ if (!pd)
+ return -ENOMEM;
+
+ ret = platform_device_add(pd);
+ if (ret)
+ platform_device_put(pd);
+
+ return ret;
+}
+
+device_initcall(sgio2audio_devinit);
+
MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("8250 UART probe driver for SGI IP32 aka O2");
diff --git a/include/sound/ad1843.h b/include/sound/ad1843.h
new file mode 100644
index 0000000..0fe9aa7
--- /dev/null
+++ b/include/sound/ad1843.h
@@ -0,0 +1,45 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright 2003 Vivien Chappelier <vivien.chappelier@linux-mips.org>
+ * Copyright 2008 Thomas Bogendoerfer <tsbogend@franken.de>
+ */
+
+#ifndef __SOUND_AD1843_H
+#define __SOUND_AD1843_H
+
+struct snd_ad1843 {
+ void *chip;
+ int (*read)(void *chip, int reg);
+ int (*write)(void *chip, int reg, int val);
+};
+
+#define AD1843_GAIN_RECLEV 0
+#define AD1843_GAIN_LINE 1
+#define AD1843_GAIN_CD 2
+#define AD1843_GAIN_MIC 3
+#define AD1843_GAIN_PCM_0 4
+#define AD1843_GAIN_PCM_1 5
+#define AD1843_GAIN_SIZE (AD1843_GAIN_PCM_1+1)
+
+int ad1843_get_gain(struct snd_ad1843 *ad1843, int id);
+int ad1843_set_gain(struct snd_ad1843 *ad1843, int id, int newval);
+int ad1843_get_recsrc(struct snd_ad1843 *ad1843);
+int ad1843_set_recsrc(struct snd_ad1843 *ad1843, int newsrc);
+void ad1843_setup_dac(struct snd_ad1843 *ad1843,
+ unsigned int id,
+ unsigned int framerate,
+ snd_pcm_format_t fmt,
+ unsigned int channels);
+void ad1843_shutdown_dac(struct snd_ad1843 *ad1843,
+ unsigned int id);
+void ad1843_setup_adc(struct snd_ad1843 *ad1843,
+ unsigned int framerate,
+ snd_pcm_format_t fmt,
+ unsigned int channels);
+void ad1843_shutdown_adc(struct snd_ad1843 *ad1843);
+int ad1843_init(struct snd_ad1843 *ad1843);
+
+#endif /* __SOUND_AD1843_H */
diff --git a/sound/mips/Kconfig b/sound/mips/Kconfig
index 531f8ba..a3e202e 100644
--- a/sound/mips/Kconfig
+++ b/sound/mips/Kconfig
@@ -11,5 +11,11 @@ config SND_AU1X00
help
ALSA Sound driver for the Au1x00's AC97 port.
+config SND_SGI_O2
+ tristate "SGI O2 Audio"
+ depends on SND && SGI_IP32
+ help
+ Sound support for the SGI O2 Workstation.
+
endmenu
diff --git a/sound/mips/Makefile b/sound/mips/Makefile
index 47afed9..55624d8 100644
--- a/sound/mips/Makefile
+++ b/sound/mips/Makefile
@@ -2,7 +2,9 @@
# Makefile for ALSA
#
+snd-sgi-o2-objs := sgio2audio.o ad1843.o
snd-au1x00-objs := au1x00.o
# Toplevel Module Dependency
obj-$(CONFIG_SND_AU1X00) += snd-au1x00.o
+obj-$(CONFIG_SND_SGI_O2) += snd-sgi-o2.o
diff --git a/sound/mips/ad1843.c b/sound/mips/ad1843.c
new file mode 100644
index 0000000..90ea2c2
--- /dev/null
+++ b/sound/mips/ad1843.c
@@ -0,0 +1,545 @@
+/*
+ * AD1843 low level driver
+ *
+ * Copyright 2003 Vivien Chappelier <vivien.chappelier@linux-mips.org>
+ * Copyright 2008 Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+ *
+ * inspired from vwsnd.c (SGI VW audio driver)
+ * Copyright 1999 Silicon Graphics, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/ad1843.h>
+
+/* TEMP: OSS stuff */
+#include <linux/soundcard.h>
+
+/*
+ * AD1843 bitfield definitions. All are named as in the AD1843 data
+ * sheet, with ad1843_ prepended and individual bit numbers removed.
+ *
+ * E.g., bits LSS0 through LSS2 become ad1843_LSS.
+ *
+ * Only the bitfields we need are defined.
+ */
+
+struct ad1843_bitfield {
+ char reg;
+ char lo_bit;
+ char nbits;
+};
+
+static const struct ad1843_bitfield
+ ad1843_PDNO = { 0, 14, 1 }, /* Converter Power-Down Flag */
+ ad1843_INIT = { 0, 15, 1 }, /* Clock Initialization Flag */
+ ad1843_RIG = { 2, 0, 4 }, /* Right ADC Input Gain */
+ ad1843_RMGE = { 2, 4, 1 }, /* Right ADC Mic Gain Enable */
+ ad1843_RSS = { 2, 5, 3 }, /* Right ADC Source Select */
+ ad1843_LIG = { 2, 8, 4 }, /* Left ADC Input Gain */
+ ad1843_LMGE = { 2, 12, 1 }, /* Left ADC Mic Gain Enable */
+ ad1843_LSS = { 2, 13, 3 }, /* Left ADC Source Select */
+ ad1843_RD2M = { 3, 0, 5 }, /* Right DAC 2 Mix Gain/Atten */
+ ad1843_RD2MM = { 3, 7, 1 }, /* Right DAC 2 Mix Mute */
+ ad1843_LD2M = { 3, 8, 5 }, /* Left DAC 2 Mix Gain/Atten */
+ ad1843_LD2MM = { 3, 15, 1 }, /* Left DAC 2 Mix Mute */
+ ad1843_RX1M = { 4, 0, 5 }, /* Right Aux 1 Mix Gain/Atten */
+ ad1843_RX1MM = { 4, 7, 1 }, /* Right Aux 1 Mix Mute */
+ ad1843_LX1M = { 4, 8, 5 }, /* Left Aux 1 Mix Gain/Atten */
+ ad1843_LX1MM = { 4, 15, 1 }, /* Left Aux 1 Mix Mute */
+ ad1843_RX2M = { 5, 0, 5 }, /* Right Aux 2 Mix Gain/Atten */
+ ad1843_RX2MM = { 5, 7, 1 }, /* Right Aux 2 Mix Mute */
+ ad1843_LX2M = { 5, 8, 5 }, /* Left Aux 2 Mix Gain/Atten */
+ ad1843_LX2MM = { 5, 15, 1 }, /* Left Aux 2 Mix Mute */
+ ad1843_RMCM = { 7, 0, 5 }, /* Right Mic Mix Gain/Atten */
+ ad1843_RMCMM = { 7, 7, 1 }, /* Right Mic Mix Mute */
+ ad1843_LMCM = { 7, 8, 5 }, /* Left Mic Mix Gain/Atten */
+ ad1843_LMCMM = { 7, 15, 1 }, /* Left Mic Mix Mute */
+ ad1843_HPOS = { 8, 4, 1 }, /* Headphone Output Voltage Swing */
+ ad1843_HPOM = { 8, 5, 1 }, /* Headphone Output Mute */
+ ad1843_MPOM = { 8, 6, 1 }, /* Mono Output Mute */
+ ad1843_RDA1G = { 9, 0, 6 }, /* Right DAC1 Analog/Digital Gain */
+ ad1843_RDA1GM = { 9, 7, 1 }, /* Right DAC1 Analog Mute */
+ ad1843_LDA1G = { 9, 8, 6 }, /* Left DAC1 Analog/Digital Gain */
+ ad1843_LDA1GM = { 9, 15, 1 }, /* Left DAC1 Analog Mute */
+ ad1843_RDA2G = { 10, 0, 6 }, /* Right DAC2 Analog/Digital Gain */
+ ad1843_RDA2GM = { 10, 7, 1 }, /* Right DAC2 Analog Mute */
+ ad1843_LDA2G = { 10, 8, 6 }, /* Left DAC2 Analog/Digital Gain */
+ ad1843_LDA2GM = { 10, 15, 1 }, /* Left DAC2 Analog Mute */
+ ad1843_RDA1AM = { 11, 7, 1 }, /* Right DAC1 Digital Mute */
+ ad1843_LDA1AM = { 11, 15, 1 }, /* Left DAC1 Digital Mute */
+ ad1843_RDA2AM = { 12, 7, 1 }, /* Right DAC2 Digital Mute */
+ ad1843_LDA2AM = { 12, 15, 1 }, /* Left DAC2 Digital Mute */
+ ad1843_ADLC = { 15, 0, 2 }, /* ADC Left Sample Rate Source */
+ ad1843_ADRC = { 15, 2, 2 }, /* ADC Right Sample Rate Source */
+ ad1843_DA1C = { 15, 8, 2 }, /* DAC1 Sample Rate Source */
+ ad1843_DA2C = { 15, 10, 2 }, /* DAC2 Sample Rate Source */
+ ad1843_C1C = { 17, 0, 16 }, /* Clock 1 Sample Rate Select */
+ ad1843_C2C = { 20, 0, 16 }, /* Clock 2 Sample Rate Select */
+ ad1843_C3C = { 23, 0, 16 }, /* Clock 3 Sample Rate Select */
+ ad1843_DAADL = { 25, 4, 2 }, /* Digital ADC Left Source Select */
+ ad1843_DAADR = { 25, 6, 2 }, /* Digital ADC Right Source Select */
+ ad1843_DAMIX = { 25, 14, 1 }, /* DAC Digital Mix Enable */
+ ad1843_DRSFLT = { 25, 15, 1 }, /* Digital Reampler Filter Mode */
+ ad1843_ADLF = { 26, 0, 2 }, /* ADC Left Channel Data Format */
+ ad1843_ADRF = { 26, 2, 2 }, /* ADC Right Channel Data Format */
+ ad1843_ADTLK = { 26, 4, 1 }, /* ADC Transmit Lock Mode Select */
+ ad1843_SCF = { 26, 7, 1 }, /* SCLK Frequency Select */
+ ad1843_DA1F = { 26, 8, 2 }, /* DAC1 Data Format Select */
+ ad1843_DA2F = { 26, 10, 2 }, /* DAC2 Data Format Select */
+ ad1843_DA1SM = { 26, 14, 1 }, /* DAC1 Stereo/Mono Mode Select */
+ ad1843_DA2SM = { 26, 15, 1 }, /* DAC2 Stereo/Mono Mode Select */
+ ad1843_ADLEN = { 27, 0, 1 }, /* ADC Left Channel Enable */
+ ad1843_ADREN = { 27, 1, 1 }, /* ADC Right Channel Enable */
+ ad1843_AAMEN = { 27, 4, 1 }, /* Analog to Analog Mix Enable */
+ ad1843_ANAEN = { 27, 7, 1 }, /* Analog Channel Enable */
+ ad1843_DA1EN = { 27, 8, 1 }, /* DAC1 Enable */
+ ad1843_DA2EN = { 27, 9, 1 }, /* DAC2 Enable */
+ ad1843_DDMEN = { 27, 12, 1 }, /* DAC2 to DAC1 Mix Enable */
+ ad1843_C1EN = { 28, 11, 1 }, /* Clock Generator 1 Enable */
+ ad1843_C2EN = { 28, 12, 1 }, /* Clock Generator 2 Enable */
+ ad1843_C3EN = { 28, 13, 1 }, /* Clock Generator 3 Enable */
+ ad1843_PDNI = { 28, 15, 1 }; /* Converter Power Down */
+
+/*
+ * The various registers of the AD1843 use three different formats for
+ * specifying gain. The ad1843_gain structure parameterizes the
+ * formats.
+ */
+
+struct ad1843_gain {
+ int negative; /* nonzero if gain is negative. */
+ const struct ad1843_bitfield *lfield;
+ const struct ad1843_bitfield *rfield;
+};
+
+const struct ad1843_gain ad1843_gain_RECLEV = {
+ 0, &ad1843_LIG, &ad1843_RIG
+};
+const struct ad1843_gain ad1843_gain_LINE = {
+ 1, &ad1843_LX1M, &ad1843_RX1M
+};
+const struct ad1843_gain ad1843_gain_CD = {
+ 1, &ad1843_LX2M, &ad1843_RX2M
+};
+const struct ad1843_gain ad1843_gain_MIC = {
+ 1, &ad1843_LMCM, &ad1843_RMCM
+};
+const struct ad1843_gain ad1843_gain_PCM_0 = {
+ 1, &ad1843_LDA1G, &ad1843_RDA1G
+};
+const struct ad1843_gain ad1843_gain_PCM_1 = {
+ 1, &ad1843_LD2M, &ad1843_RD2M
+};
+
+const struct ad1843_gain *ad1843_gain[AD1843_GAIN_SIZE] =
+{
+ &ad1843_gain_RECLEV,
+ &ad1843_gain_LINE,
+ &ad1843_gain_CD,
+ &ad1843_gain_MIC,
+ &ad1843_gain_PCM_0,
+ &ad1843_gain_PCM_1,
+};
+
+/* read the current value of an AD1843 bitfield. */
+
+static int ad1843_read_bits(struct snd_ad1843 *ad1843,
+ const struct ad1843_bitfield *field)
+{
+ int w;
+
+ w = ad1843->read(ad1843->chip, field->reg);
+ return w >> field->lo_bit & ((1 << field->nbits) - 1);
+}
+
+/*
+ * write a new value to an AD1843 bitfield and return the old value.
+ */
+
+static int ad1843_write_bits(struct snd_ad1843 *ad1843,
+ const struct ad1843_bitfield *field,
+ int newval)
+{
+ int w, mask, oldval, newbits;
+
+ w = ad1843->read(ad1843->chip, field->reg);
+ mask = ((1 << field->nbits) - 1) << field->lo_bit;
+ oldval = (w & mask) >> field->lo_bit;
+ newbits = (newval << field->lo_bit) & mask;
+ w = (w & ~mask) | newbits;
+ ad1843->write(ad1843->chip, field->reg, w);
+
+ return oldval;
+}
+
+/*
+ * ad1843_read_multi reads multiple bitfields from the same AD1843
+ * register. It uses a single read cycle to do it. (Reading the
+ * ad1843 requires 256 bit times at 12.288 MHz, or nearly 20
+ * microseconds.)
+ *
+ * Called like this.
+ *
+ * ad1843_read_multi(ad1843, nfields,
+ * &ad1843_FIELD1, &val1,
+ * &ad1843_FIELD2, &val2, ...);
+ */
+
+static void ad1843_read_multi(struct snd_ad1843 *ad1843, int argcount, ...)
+{
+ va_list ap;
+ const struct ad1843_bitfield *fp;
+ int w = 0, mask, *value, reg = -1;
+
+ va_start(ap, argcount);
+ while (--argcount >= 0) {
+ fp = va_arg(ap, const struct ad1843_bitfield *);
+ value = va_arg(ap, int *);
+ if (reg == -1) {
+ reg = fp->reg;
+ w = ad1843->read(ad1843->chip, reg);
+ }
+
+ mask = (1 << fp->nbits) - 1;
+ *value = w >> fp->lo_bit & mask;
+ }
+ va_end(ap);
+}
+
+/*
+ * ad1843_write_multi stores multiple bitfields into the same AD1843
+ * register. It uses one read and one write cycle to do it.
+ *
+ * Called like this.
+ *
+ * ad1843_write_multi(ad1843, nfields,
+ * &ad1843_FIELD1, val1,
+ * &ad1843_FIELF2, val2, ...);
+ */
+
+static void ad1843_write_multi(struct snd_ad1843 *ad1843, int argcount, ...)
+{
+ va_list ap;
+ int reg;
+ const struct ad1843_bitfield *fp;
+ int value;
+ int w, m, mask, bits;
+
+ mask = 0;
+ bits = 0;
+ reg = -1;
+
+ va_start(ap, argcount);
+ while (--argcount >= 0) {
+ fp = va_arg(ap, const struct ad1843_bitfield *);
+ value = va_arg(ap, int);
+ if (reg == -1)
+ reg = fp->reg;
+ else
+ BUG_ON(reg != fp->reg);
+ m = ((1 << fp->nbits) - 1) << fp->lo_bit;
+ mask |= m;
+ bits |= (value << fp->lo_bit) & m;
+ }
+ va_end(ap);
+
+ if (~mask & 0xFFFF)
+ w = ad1843->read(ad1843->chip, reg);
+ else
+ w = 0;
+ w = (w & ~mask) | bits;
+ ad1843->write(ad1843->chip, reg, w);
+}
+
+/*
+ * ad1843_get_gain reads the specified register and extracts the gain value
+ * using the supplied gain type. It returns the gain in OSS format.
+ */
+
+int ad1843_get_gain(struct snd_ad1843 *ad1843, int id)
+{
+ int lg, rg;
+ const struct ad1843_gain *gp = ad1843_gain[id];
+ unsigned short mask = (1 << gp->lfield->nbits) - 1;
+
+ ad1843_read_multi(ad1843, 2, gp->lfield, &lg, gp->rfield, &rg);
+ if (gp->negative) {
+ lg = mask - lg;
+ rg = mask - rg;
+ }
+ lg = (lg * 100 + (mask >> 1)) / mask;
+ rg = (rg * 100 + (mask >> 1)) / mask;
+ return lg << 0 | rg << 8;
+}
+
+/*
+ * Set an audio channel's gain. Converts from OSS format to AD1843's
+ * format.
+ *
+ * Returns the new gain, which may be lower than the old gain.
+ */
+
+int ad1843_set_gain(struct snd_ad1843 *ad1843, int id, int newval)
+{
+ const struct ad1843_gain *gp = ad1843_gain[id];
+ unsigned short mask = (1 << gp->lfield->nbits) - 1;
+
+ int lg = newval >> 0 & 0xFF;
+ int rg = newval >> 8;
+ if (lg < 0 || lg > 100 || rg < 0 || rg > 100)
+ return -EINVAL;
+ lg = (lg * mask + (mask >> 1)) / 100;
+ rg = (rg * mask + (mask >> 1)) / 100;
+ if (gp->negative) {
+ lg = mask - lg;
+ rg = mask - rg;
+ }
+ ad1843_write_multi(ad1843, 2, gp->lfield, lg, gp->rfield, rg);
+ return ad1843_get_gain(ad1843, id);
+}
+
+/* Returns the current recording source, in OSS format. */
+
+int ad1843_get_recsrc(struct snd_ad1843 *ad1843)
+{
+ return ad1843_read_bits(ad1843, &ad1843_LSS);
+}
+
+/*
+ * Set recording source. Arg newsrc specifies an OSS channel mask.
+ *
+ * The complication is that when we switch into/out of loopback mode
+ * (i.e., src = SOUND_MASK_PCM), we change the AD1843 into/out of
+ * digital resampling mode.
+ *
+ * Returns newsrc on success, -errno on failure.
+ */
+
+int ad1843_set_recsrc(struct snd_ad1843 *ad1843, int newsrc)
+{
+ if (newsrc < 0 || newsrc > 7)
+ return -EINVAL;
+
+ ad1843_write_multi(ad1843, 2, &ad1843_LSS, newsrc, &ad1843_RSS, newsrc);
+ return newsrc;
+}
+
+/*
+ * Set output sources. Arg is a mask of active sources in OSS format.
+ *
+ * Returns source mask on success, -errno on failure.
+ */
+
+static int ad1843_set_outsrc(struct snd_ad1843 *ad1843, int mask)
+{
+ int pcm, line, mic, cd;
+
+ if (mask & ~(SOUND_MASK_PCM | SOUND_MASK_LINE |
+ SOUND_MASK_CD | SOUND_MASK_MIC))
+ return -EINVAL;
+ pcm = (mask & SOUND_MASK_PCM) ? 0 : 1;
+ line = (mask & SOUND_MASK_LINE) ? 0 : 1;
+ mic = (mask & SOUND_MASK_MIC) ? 0 : 1;
+ cd = (mask & SOUND_MASK_CD) ? 0 : 1;
+
+ ad1843_write_multi(ad1843, 2, &ad1843_LDA1GM, pcm, &ad1843_RDA1GM, pcm);
+ ad1843_write_multi(ad1843, 2, &ad1843_LX1MM, line, &ad1843_RX1MM, line);
+ ad1843_write_multi(ad1843, 2, &ad1843_LX2MM, cd, &ad1843_RX2MM, cd);
+ ad1843_write_multi(ad1843, 2, &ad1843_LMCMM, mic, &ad1843_RMCMM, mic);
+
+ return mask;
+}
+
+/* Setup ad1843 for D/A conversion. */
+
+void ad1843_setup_dac(struct snd_ad1843 *ad1843,
+ unsigned int id,
+ unsigned int framerate,
+ snd_pcm_format_t fmt,
+ unsigned int channels)
+{
+ int ad_fmt = 0, ad_mode = 0;
+
+ switch (fmt) {
+ case SNDRV_PCM_FORMAT_S8:
+ ad_fmt = 0;
+ break;
+ case SNDRV_PCM_FORMAT_U8:
+ ad_fmt = 0;
+ break;
+ case SNDRV_PCM_FORMAT_S16_LE:
+ ad_fmt = 1;
+ break;
+ case SNDRV_PCM_FORMAT_MU_LAW:
+ ad_fmt = 2;
+ break;
+ case SNDRV_PCM_FORMAT_A_LAW:
+ ad_fmt = 3;
+ break;
+ default:
+ break;
+ }
+
+ switch (channels) {
+ case 2:
+ ad_mode = 0;
+ break;
+ case 1:
+ ad_mode = 1;
+ break;
+ default:
+ break;
+ }
+
+ if (id) {
+ ad1843_write_bits(ad1843, &ad1843_C2C, framerate);
+ ad1843_write_multi(ad1843, 2,
+ &ad1843_DA2SM, ad_mode,
+ &ad1843_DA2F, ad_fmt);
+ } else {
+ ad1843_write_bits(ad1843, &ad1843_C1C, framerate);
+ ad1843_write_multi(ad1843, 2,
+ &ad1843_DA1SM, ad_mode,
+ &ad1843_DA1F, ad_fmt);
+ }
+}
+
+void ad1843_shutdown_dac(struct snd_ad1843 *ad1843, unsigned int id)
+{
+ if (id)
+ ad1843_write_bits(ad1843, &ad1843_DA2F, 1);
+ else
+ ad1843_write_bits(ad1843, &ad1843_DA1F, 1);
+}
+
+void ad1843_setup_adc(struct snd_ad1843 *ad1843,
+ unsigned int framerate,
+ snd_pcm_format_t fmt,
+ unsigned int channels)
+{
+ int da_fmt = 0;
+
+ switch (fmt) {
+ case SNDRV_PCM_FORMAT_S8: da_fmt = 0; break;
+ case SNDRV_PCM_FORMAT_U8: da_fmt = 0; break;
+ case SNDRV_PCM_FORMAT_S16_LE: da_fmt = 1; break;
+ case SNDRV_PCM_FORMAT_MU_LAW: da_fmt = 2; break;
+ case SNDRV_PCM_FORMAT_A_LAW: da_fmt = 3; break;
+ default: break;
+ }
+
+ ad1843_write_bits(ad1843, &ad1843_C3C, framerate);
+ ad1843_write_multi(ad1843, 2,
+ &ad1843_ADLF, da_fmt, &ad1843_ADRF, da_fmt);
+}
+
+void ad1843_shutdown_adc(struct snd_ad1843 *ad1843)
+{
+ /* nothing to do */
+}
+
+/*
+ * Fully initialize the ad1843. As described in the AD1843 data
+ * sheet, section "START-UP SEQUENCE". The numbered comments are
+ * subsection headings from the data sheet. See the data sheet, pages
+ * 52-54, for more info.
+ *
+ * return 0 on success, -errno on failure. */
+
+int ad1843_init(struct snd_ad1843 *ad1843)
+{
+ unsigned long later;
+
+ if (ad1843_read_bits(ad1843, &ad1843_INIT) != 0) {
+ printk(KERN_ERR "ad1843: AD1843 won't initialize\n");
+ return -EIO;
+ }
+
+ ad1843_write_bits(ad1843, &ad1843_SCF, 1);
+
+ /* 4. Put the conversion resources into standby. */
+ ad1843_write_bits(ad1843, &ad1843_PDNI, 0);
+ later = jiffies + HZ / 2; /* roughly half a second */
+
+ while (ad1843_read_bits(ad1843, &ad1843_PDNO)) {
+ if (time_after(jiffies, later)) {
+ printk(KERN_ERR
+ "ad1843: AD1843 won't power up\n");
+ return -EIO;
+ }
+ schedule();
+ }
+
+ /* 5. Power up the clock generators and enable clock output pins. */
+ ad1843_write_multi(ad1843, 3,
+ &ad1843_C1EN, 1,
+ &ad1843_C2EN, 1,
+ &ad1843_C3EN, 1);
+
+ /* 6. Configure conversion resources while they are in standby. */
+
+ /* DAC1/2 use clock 1/2 as source, ADC uses clock 3. Always. */
+ ad1843_write_multi(ad1843, 4,
+ &ad1843_DA1C, 1,
+ &ad1843_DA2C, 2,
+ &ad1843_ADLC, 3,
+ &ad1843_ADRC, 3);
+
+ /* 7. Enable conversion resources. */
+ ad1843_write_bits(ad1843, &ad1843_ADTLK, 1);
+ ad1843_write_multi(ad1843, 7,
+ &ad1843_ANAEN, 1,
+ &ad1843_AAMEN, 1,
+ &ad1843_DA1EN, 1,
+ &ad1843_DA2EN, 1,
+ &ad1843_DDMEN, 1,
+ &ad1843_ADLEN, 1,
+ &ad1843_ADREN, 1);
+
+ /* 8. Configure conversion resources while they are enabled. */
+
+ /* Unmute all channels. */
+
+ ad1843_set_outsrc(ad1843,
+ (SOUND_MASK_PCM | SOUND_MASK_LINE |
+ SOUND_MASK_MIC | SOUND_MASK_CD));
+ ad1843_write_multi(ad1843, 2,
+ &ad1843_LDA1AM, 0,
+ &ad1843_RDA1AM, 0);
+ ad1843_write_multi(ad1843, 2,
+ &ad1843_LD2MM, 0,
+ &ad1843_RD2MM, 0);
+
+ /* Set default recording source to Line In and set
+ * mic gain to +20 dB.
+ */
+ ad1843_set_recsrc(ad1843, SOUND_MASK_LINE);
+ ad1843_write_multi(ad1843, 2, &ad1843_LMGE, 1, &ad1843_RMGE, 1);
+
+ /* Set Speaker Out level to +/- 4V and unmute it. */
+ ad1843_write_multi(ad1843, 3,
+ &ad1843_HPOS, 1,
+ &ad1843_HPOM, 0,
+ &ad1843_MPOM, 0);
+
+ return 0;
+}
diff --git a/sound/mips/sgio2audio.c b/sound/mips/sgio2audio.c
new file mode 100644
index 0000000..cb6a9ce
--- /dev/null
+++ b/sound/mips/sgio2audio.c
@@ -0,0 +1,1034 @@
+/*
+ * Sound driver for Silicon Graphics O2 Workstations A/V board audio.
+ *
+ * Copyright 2003 Vivien Chappelier <vivien.chappelier@linux-mips.org>
+ * Copyright 2008 Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+ * Mxier part taken from mace_audio.c:
+ * Copyright 2007 Thorben Jändling <tj.trevelyan@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/gfp.h>
+#include <linux/vmalloc.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <asm/ip32/ip32_ints.h>
+#include <asm/ip32/mace.h>
+
+#include <sound/core.h>
+#include <sound/control.h>
+#include <sound/pcm.h>
+#define SNDRV_GET_ID
+#include <sound/initval.h>
+#include <sound/ad1843.h>
+
+
+MODULE_AUTHOR("Vivien Chappelier <vivien.chappelier@linux-mips.org>");
+MODULE_DESCRIPTION("SGI O2 Audio");
+MODULE_LICENSE("GPL");
+MODULE_SUPPORTED_DEVICE("{{Silicon Graphics, O2 Audio}}");
+
+static int index = SNDRV_DEFAULT_IDX1; /* Index 0-MAX */
+static char *id = SNDRV_DEFAULT_STR1; /* ID for this card */
+
+module_param(index, int, 0444);
+MODULE_PARM_DESC(index, "Index value for SGI O2 soundcard.");
+module_param(id, charp, 0444);
+MODULE_PARM_DESC(id, "ID string for SGI O2 soundcard.");
+
+
+#define SGIO2AUDIO_MAX_VOLUME 1000
+
+#define AUDIO_CONTROL_RESET BIT(0) /* 1: reset audio interface */
+#define AUDIO_CONTROL_CODEC_PRESENT BIT(1) /* 1: codec detected */
+/* 2-8 : channel 1 write ptr alias */
+/* 9-15 : channel 2 read ptr alias */
+/* 16-22 : channel 3 read ptr alias */
+#define AUDIO_CONTROL_VOLUME_BUTTON_UP BIT(23) /* latched volume button */
+#define AUDIO_CONTROL_VOLUME_BUTTON_DOWN BIT(24) /* latched volume button */
+
+#define CODEC_CONTROL_WORD_SHIFT 0
+#define CODEC_CONTROL_READ BIT(16)
+#define CODEC_CONTROL_ADDRESS_SHIFT 17
+
+#define CHANNEL_CONTROL_RESET BIT(10) /* 1: reset channel */
+#define CHANNEL_DMA_ENABLE BIT(9) /* 1: enable DMA transfer */
+#define CHANNEL_INT_THRESHOLD_DISABLED (0 << 5) /* interrupt disabled */
+#define CHANNEL_INT_THRESHOLD_25 (1 << 5) /* int on buffer >25% full */
+#define CHANNEL_INT_THRESHOLD_50 (2 << 5) /* int on buffer >50% full */
+#define CHANNEL_INT_THRESHOLD_75 (3 << 5) /* int on buffer >75% full */
+#define CHANNEL_INT_THRESHOLD_EMPTY (4 << 5) /* int on buffer empty */
+#define CHANNEL_INT_THRESHOLD_NOT_EMPTY (5 << 5) /* int on buffer !empty */
+#define CHANNEL_INT_THRESHOLD_FULL (6 << 5) /* int on buffer empty */
+#define CHANNEL_INT_THRESHOLD_NOT_FULL (7 << 5) /* int on buffer !empty */
+
+#define CHANNEL_RING_SHIFT 12
+#define CHANNEL_RING_SIZE (1 << CHANNEL_RING_SHIFT)
+#define CHANNEL_RING_MASK (CHANNEL_RING_SIZE - 1)
+
+#define CHANNEL_LEFT_SHIFT 40
+#define CHANNEL_RIGHT_SHIFT 8
+
+struct snd_sgio2audio_chan {
+ int idx;
+ struct snd_pcm_substream *substream;
+ void *buffer;
+ unsigned int pos;
+ snd_pcm_uframes_t size;
+ spinlock_t lock;
+ int opened;
+};
+
+/* definition of the chip-specific record */
+struct snd_sgio2audio {
+ struct snd_card *card;
+
+ struct snd_pcm *pcm;
+
+ /* codec */
+ struct snd_ad1843 *ad1843;
+ spinlock_t ad1843_lock;
+
+ /* channels */
+ struct snd_sgio2audio_chan channel[3];
+
+ /* properties */
+ int volume;
+ snd_pcm_format_t format;
+
+ /* resources */
+ void *ring_base;
+ dma_addr_t ring_base_dma;
+ int irq_start;
+ int irq_end;
+};
+
+/* AD1843 access */
+
+/*
+ * read_ad1843_reg returns the current contents of a 16 bit AD1843 register.
+ *
+ * Returns unsigned register value on success, -errno on failure.
+ */
+static int read_ad1843_reg(void *priv, int reg)
+{
+ struct snd_sgio2audio *chip = priv;
+ int val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&chip->ad1843_lock, flags);
+
+ writeq((reg << CODEC_CONTROL_ADDRESS_SHIFT) |
+ CODEC_CONTROL_READ, &mace->perif.audio.codec_control);
+ wmb();
+ val = readq(&mace->perif.audio.codec_control); /* flush bus */
+ udelay(200);
+
+ val = readq(&mace->perif.audio.codec_read);
+
+ spin_unlock_irqrestore(&chip->ad1843_lock, flags);
+ return val;
+}
+
+/*
+ * write_ad1843_reg writes the specified value to a 16 bit AD1843 register.
+ */
+static int write_ad1843_reg(void *priv, int reg, int word)
+{
+ struct snd_sgio2audio *chip = priv;
+ int val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&chip->ad1843_lock, flags);
+
+ writeq((reg << CODEC_CONTROL_ADDRESS_SHIFT) |
+ (word << CODEC_CONTROL_WORD_SHIFT),
+ &mace->perif.audio.codec_control);
+ wmb();
+ val = readq(&mace->perif.audio.codec_control); /* flush bus */
+ udelay(200);
+
+ spin_unlock_irqrestore(&chip->ad1843_lock, flags);
+ return 0;
+}
+
+static struct snd_ad1843 ad1843_ops = {
+ NULL, /* initialized in snd_sgio2_audio_create */
+ read_ad1843_reg,
+ write_ad1843_reg,
+};
+
+static int sgio2audio_gain_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 2;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = 100;
+ return 0;
+}
+
+static int sgio2audio_gain_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_sgio2audio *chip = snd_kcontrol_chip(kcontrol);
+ int vol;
+ unsigned long flags;
+
+ spin_lock_irqsave(&chip->ad1843_lock, flags);
+
+ vol = ad1843_get_gain(chip->ad1843, (int)kcontrol->private_value);
+
+ ucontrol->value.integer.value[0] = vol & 0xFF;
+ ucontrol->value.integer.value[1] = (vol >> 8) & 0xFF;
+
+ spin_unlock_irqrestore(&chip->ad1843_lock, flags);
+
+ return 0;
+}
+
+static int sgio2audio_gain_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_sgio2audio *chip = snd_kcontrol_chip(kcontrol);
+ int newvol, oldvol;
+ unsigned long flags;
+
+ spin_lock_irqsave(&chip->ad1843_lock, flags);
+
+ oldvol = ad1843_get_gain(chip->ad1843, kcontrol->private_value);
+ newvol = (ucontrol->value.integer.value[1] << 8) |
+ ucontrol->value.integer.value[0];
+
+ newvol = ad1843_set_gain(chip->ad1843, kcontrol->private_value,
+ newvol);
+
+ spin_unlock_irqrestore(&chip->ad1843_lock, flags);
+
+ return newvol != oldvol;
+}
+
+static int sgio2audio_source_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ static const char *texts[2] = {
+ "Line In", "Mic"
+ };
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+ uinfo->count = 1;
+ uinfo->value.enumerated.items = 2;
+ if (uinfo->value.enumerated.item >= 2)
+ uinfo->value.enumerated.item = 1;
+ strcpy(uinfo->value.enumerated.name,
+ texts[uinfo->value.enumerated.item]);
+ return 0;
+}
+
+static int sgio2audio_source_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_sgio2audio *chip = snd_kcontrol_chip(kcontrol);
+ unsigned long flags;
+
+ spin_lock_irqsave(&chip->ad1843_lock, flags);
+
+ ucontrol->value.enumerated.item[0] = ad1843_get_recsrc(chip->ad1843);
+
+ spin_unlock_irqrestore(&chip->ad1843_lock, flags);
+
+ return 0;
+}
+
+static int sgio2audio_source_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_sgio2audio *chip = snd_kcontrol_chip(kcontrol);
+ int newsrc, oldsrc;
+ unsigned long flags;
+
+ spin_lock_irqsave(&chip->ad1843_lock, flags);
+
+ oldsrc = ad1843_get_recsrc(chip->ad1843);
+ newsrc = ad1843_set_recsrc(chip->ad1843,
+ ucontrol->value.enumerated.item[0]);
+
+ spin_unlock_irqrestore(&chip->ad1843_lock, flags);
+
+ return newsrc != oldsrc;
+}
+
+/* dac1/pcm0 mixer control */
+static struct snd_kcontrol_new sgio2audio_ctrl_pcm0 __devinitdata = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Playback 0 Volume",
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .private_value = AD1843_GAIN_PCM_0,
+ .info = sgio2audio_gain_info,
+ .get = sgio2audio_gain_get,
+ .put = sgio2audio_gain_put,
+};
+
+/* dac2/pcm1 mixer control */
+static struct snd_kcontrol_new sgio2audio_ctrl_pcm1 __devinitdata = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Playback 1 Volume",
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .private_value = AD1843_GAIN_PCM_1,
+ .info = sgio2audio_gain_info,
+ .get = sgio2audio_gain_get,
+ .put = sgio2audio_gain_put,
+};
+
+/* record level mixer control */
+static struct snd_kcontrol_new sgio2audio_ctrl_reclevel __devinitdata = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Capture Volume",
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .private_value = AD1843_GAIN_RECLEV,
+ .info = sgio2audio_gain_info,
+ .get = sgio2audio_gain_get,
+ .put = sgio2audio_gain_put,
+};
+
+/* record level source control */
+static struct snd_kcontrol_new sgio2audio_ctrl_recsource __devinitdata = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Capture Source",
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .info = sgio2audio_source_info,
+ .get = sgio2audio_source_get,
+ .put = sgio2audio_source_put,
+};
+
+/* line mixer control */
+static struct snd_kcontrol_new sgio2audio_ctrl_line __devinitdata = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Line Volume",
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .private_value = AD1843_GAIN_LINE,
+ .info = sgio2audio_gain_info,
+ .get = sgio2audio_gain_get,
+ .put = sgio2audio_gain_put,
+};
+
+/* cd mixer control */
+static struct snd_kcontrol_new sgio2audio_ctrl_cd __devinitdata = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "CD Volume",
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .private_value = AD1843_GAIN_CD,
+ .info = sgio2audio_gain_info,
+ .get = sgio2audio_gain_get,
+ .put = sgio2audio_gain_put,
+};
+
+/* mic mixer control */
+static struct snd_kcontrol_new sgio2audio_ctrl_mic __devinitdata = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Mic Volume",
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .private_value = AD1843_GAIN_MIC,
+ .info = sgio2audio_gain_info,
+ .get = sgio2audio_gain_get,
+ .put = sgio2audio_gain_put,
+};
+
+
+static int __devinit snd_sgio2audio_new_mixer(struct snd_sgio2audio *chip)
+{
+ int err;
+
+ err = snd_ctl_add(chip->card,
+ snd_ctl_new1(&sgio2audio_ctrl_pcm0, chip));
+ if (err < 0)
+ return err;
+
+ err = snd_ctl_add(chip->card,
+ snd_ctl_new1(&sgio2audio_ctrl_pcm1, chip));
+ if (err < 0)
+ return err;
+
+ err = snd_ctl_add(chip->card,
+ snd_ctl_new1(&sgio2audio_ctrl_reclevel, chip));
+ if (err < 0)
+ return err;
+
+ err = snd_ctl_add(chip->card,
+ snd_ctl_new1(&sgio2audio_ctrl_recsource, chip));
+ if (err < 0)
+ return err;
+ err = snd_ctl_add(chip->card,
+ snd_ctl_new1(&sgio2audio_ctrl_line, chip));
+ if (err < 0)
+ return err;
+
+ err = snd_ctl_add(chip->card,
+ snd_ctl_new1(&sgio2audio_ctrl_cd, chip));
+ if (err < 0)
+ return err;
+
+ err = snd_ctl_add(chip->card,
+ snd_ctl_new1(&sgio2audio_ctrl_mic, chip));
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+/* low-level audio interface DMA */
+
+/* get data out of bounce buffer, count must be a multiple of 32 */
+/* returns 1 if a period has elapsed */
+static int snd_sgio2audio_dma_pull_frag(struct snd_sgio2audio *chip,
+ unsigned int ch, unsigned int count)
+{
+ int ret;
+ unsigned long src_base, src_pos;
+ unsigned long dst_base, dst_pos, dst_mask;
+ u32 *src;
+ s16 *dst;
+ unsigned long flags;
+ struct snd_pcm_runtime *runtime = chip->channel[ch].substream->runtime;
+
+ spin_lock_irqsave(&chip->channel[ch].lock, flags);
+
+ src_base = (unsigned long) chip->ring_base | (ch << CHANNEL_RING_SHIFT);
+ src_pos = readq(&mace->perif.audio.chan[ch].read_ptr);
+ dst_base = (unsigned long) chip->channel[ch].buffer;
+ dst_pos = (unsigned long) chip->channel[ch].pos;
+ dst_mask = frames_to_bytes(runtime, runtime->buffer_size) - 1;
+
+ /* check if a period has elapsed */
+ chip->channel[ch].size += (count >> 3); /* in frames */
+ ret = chip->channel[ch].size >= runtime->period_size;
+ chip->channel[ch].size %= runtime->period_size;
+
+ if (count & 7)
+ count -= 4;
+ while (count) {
+ dst = (s16 *)(src_base + src_pos);
+ src = (u32 *)(dst_base + dst_pos);
+
+ dst[0] = src[0] >> 16;
+ dst[1] = src[1] >> 16;
+
+ src_pos = (src_pos + 2 * sizeof(u32)) & CHANNEL_RING_MASK;
+ dst_pos = (dst_pos + 2 * sizeof(s16)) & dst_mask;
+ count -= sizeof(u64);
+ }
+
+ writeq(src_pos, &mace->perif.audio.chan[ch].read_ptr); /* in bytes */
+ chip->channel[ch].pos = dst_pos;
+
+ spin_unlock_irqrestore(&chip->channel[ch].lock, flags);
+ return ret;
+}
+
+/* put some DMA data in bounce buffer, count must be a multiple of 32 */
+/* returns 1 if a period has elapsed */
+static int snd_sgio2audio_dma_push_frag(struct snd_sgio2audio *chip,
+ unsigned int ch, unsigned int count)
+{
+ int ret;
+ s64 l, r;
+ unsigned long dst_base, dst_pos;
+ unsigned long src_base, src_pos, src_mask;
+ u64 *dst;
+ s16 *src;
+ unsigned long flags;
+ struct snd_pcm_runtime *runtime = chip->channel[ch].substream->runtime;
+
+ spin_lock_irqsave(&chip->channel[ch].lock, flags);
+
+ dst_base = (unsigned long) chip->ring_base | (ch << CHANNEL_RING_SHIFT);
+ dst_pos = readq(&mace->perif.audio.chan[ch].write_ptr);
+ src_base = (unsigned long) chip->channel[ch].buffer;
+ src_pos = (unsigned long) chip->channel[ch].pos;
+ src_mask = frames_to_bytes(runtime, runtime->buffer_size) - 1;
+
+ /* check if a period has elapsed */
+ chip->channel[ch].size += (count >> 3); /* in frames */
+ ret = chip->channel[ch].size >= runtime->period_size;
+ chip->channel[ch].size %= runtime->period_size;
+
+ while (count) {
+ src = (s16 *)(src_base + src_pos);
+ dst = (u64 *)(dst_base + dst_pos);
+
+ l = src[0]; /* sign extend */
+ r = src[1]; /* sign extend */
+
+ *dst = ((l & 0x00ffffff) << CHANNEL_LEFT_SHIFT) |
+ ((r & 0x00ffffff) << CHANNEL_RIGHT_SHIFT);
+
+ dst_pos = (dst_pos + sizeof(u64)) & CHANNEL_RING_MASK;
+ src_pos = (src_pos + 2 * sizeof(s16)) & src_mask;
+ count -= sizeof(u64);
+ }
+
+ writeq(dst_pos, &mace->perif.audio.chan[ch].write_ptr); /* in bytes */
+ chip->channel[ch].pos = src_pos;
+
+ spin_unlock_irqrestore(&chip->channel[ch].lock, flags);
+ return ret;
+}
+
+static int snd_sgio2audio_dma_start(struct snd_pcm_substream *substream)
+{
+ struct snd_sgio2audio *chip = snd_pcm_substream_chip(substream);
+ struct snd_sgio2audio_chan *chan = substream->runtime->private_data;
+ int ch = chan->idx;
+
+ /* reset DMA channel */
+ writeq(CHANNEL_CONTROL_RESET, &mace->perif.audio.chan[ch].control);
+ udelay(10);
+ writeq(0, &mace->perif.audio.chan[ch].control);
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ /* push a full buffer */
+ snd_sgio2audio_dma_push_frag(chip, ch, CHANNEL_RING_SIZE - 32);
+ }
+ /* set DMA to wake on 50% empty and enable interrupt */
+ writeq(CHANNEL_DMA_ENABLE | CHANNEL_INT_THRESHOLD_50,
+ &mace->perif.audio.chan[ch].control);
+ return 0;
+}
+
+static int snd_sgio2audio_dma_stop(struct snd_pcm_substream *substream)
+{
+ struct snd_sgio2audio_chan *chan = substream->runtime->private_data;
+
+ writeq(0, &mace->perif.audio.chan[chan->idx].control);
+ return 0;
+}
+
+static irqreturn_t snd_sgio2audio_dma_in_isr(int irq, void *dev_id)
+{
+ struct snd_sgio2audio_chan *chan = dev_id;
+ struct snd_pcm_substream *substream;
+ struct snd_sgio2audio *chip;
+ int count, ch;
+
+ substream = chan->substream;
+ chip = snd_pcm_substream_chip(substream);
+ ch = chan->idx;
+
+ /* empty the ring */
+ count = CHANNEL_RING_SIZE -
+ readq(&mace->perif.audio.chan[ch].depth) - 32;
+ if (snd_sgio2audio_dma_pull_frag(chip, ch, count))
+ snd_pcm_period_elapsed(substream);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t snd_sgio2audio_dma_out_isr(int irq, void *dev_id)
+{
+ struct snd_sgio2audio_chan *chan = dev_id;
+ struct snd_pcm_substream *substream;
+ struct snd_sgio2audio *chip;
+ int count, ch;
+
+ substream = chan->substream;
+ chip = snd_pcm_substream_chip(substream);
+ ch = chan->idx;
+ /* fill the ring */
+ count = CHANNEL_RING_SIZE -
+ readq(&mace->perif.audio.chan[ch].depth) - 32;
+ if (snd_sgio2audio_dma_push_frag(chip, ch, count))
+ snd_pcm_period_elapsed(substream);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t snd_sgio2audio_misc_isr(int irq, void *dev_id)
+{
+ struct snd_sgio2audio *chip = dev_id;
+ unsigned long status;
+
+ switch (irq) {
+ /* volume changed */
+ case MACEISA_AUDIO_SC_IRQ:
+ status = readq(&mace->perif.audio.control);
+ if (status & AUDIO_CONTROL_VOLUME_BUTTON_UP) {
+ status &= ~AUDIO_CONTROL_VOLUME_BUTTON_UP;
+ writeq(status, &mace->perif.audio.control);
+ if (chip->volume < SGIO2AUDIO_MAX_VOLUME)
+ chip->volume++;
+ }
+ if (status & AUDIO_CONTROL_VOLUME_BUTTON_DOWN) {
+ status &= ~AUDIO_CONTROL_VOLUME_BUTTON_DOWN;
+ writeq(status, &mace->perif.audio.control);
+ if (chip->volume > 0)
+ chip->volume--;
+ }
+ /* program AD1843 with the new volume */
+ ad1843_set_gain(chip->ad1843, AD1843_GAIN_PCM_0,
+ chip->volume / 10);
+ ad1843_set_gain(chip->ad1843, AD1843_GAIN_PCM_1,
+ chip->volume / 10);
+ break;
+
+ default:
+ printk(KERN_ERR "sgio2audio: unhandled interrupt %d\n", irq);
+ /* TEMP : stop DMA */
+ writeq(0, &mace->perif.audio.chan[0].control);
+ writeq(0, &mace->perif.audio.chan[1].control);
+ writeq(0, &mace->perif.audio.chan[2].control);
+ break;
+ }
+ return IRQ_HANDLED;
+}
+
+/* PCM part */
+/* PCM hardware definition */
+static struct snd_pcm_hardware snd_sgio2audio_playback_hw = {
+ .info = (SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER),
+ .formats = SNDRV_PCM_FMTBIT_S16_BE,
+ .rates = SNDRV_PCM_RATE_8000_48000,
+ .rate_min = 8000,
+ .rate_max = 48000,
+ .channels_min = 2,
+ .channels_max = 2,
+ .buffer_bytes_max = 65536,
+ .period_bytes_min = 32768,
+ .period_bytes_max = 65536,
+ .periods_min = 1,
+ .periods_max = 1024,
+};
+
+/* PCM playback open callback */
+static int snd_sgio2audio_playback_open(struct snd_pcm_substream *substream)
+{
+ struct snd_sgio2audio *chip = snd_pcm_substream_chip(substream);
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ int i;
+
+ for (i = 1; i < 3; i++)
+ if (!chip->channel[i].opened) {
+ chip->channel[i].opened = 1;
+ runtime->hw = snd_sgio2audio_playback_hw;
+ runtime->private_data = &chip->channel[i];
+ return 0;
+ }
+
+ return -ENOMEM;
+}
+
+/* PCM playback close callback */
+static int snd_sgio2audio_playback_close(struct snd_pcm_substream *substream)
+{
+ struct snd_sgio2audio *chip = snd_pcm_substream_chip(substream);
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct snd_sgio2audio_chan *chan = substream->runtime->private_data;
+
+ chip->channel[chan->idx].opened = 0;
+ runtime->private_data = NULL;
+
+ /* TODO: hardware code */
+ return 0;
+}
+
+/* PCM capture open callback */
+static int snd_sgio2audio_capture_open(struct snd_pcm_substream *substream)
+{
+ struct snd_sgio2audio *chip = snd_pcm_substream_chip(substream);
+ struct snd_pcm_runtime *runtime = substream->runtime;
+
+ runtime->hw = snd_sgio2audio_playback_hw;
+ runtime->private_data = &chip->channel[0];
+ return 0;
+}
+
+/* PCM capture close callback */
+static int snd_sgio2audio_capture_close(struct snd_pcm_substream *substream)
+{
+ return 0;
+}
+
+
+/* hw_params callback */
+static int snd_sgio2audio_pcm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *hw_params)
+{
+ /* alloc virtual 'dma' area */
+ if (substream->runtime->dma_area)
+ vfree(substream->runtime->dma_area);
+ substream->runtime->dma_area = vmalloc(params_buffer_bytes(hw_params));
+ if (substream->runtime->dma_area == NULL)
+ return -ENOMEM;
+ return 0;
+}
+
+/* hw_free callback */
+static int snd_sgio2audio_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+ if (substream->runtime->dma_area)
+ vfree(substream->runtime->dma_area);
+ substream->runtime->dma_area = NULL;
+ return 0;
+}
+
+/* prepare callback */
+static int snd_sgio2audio_pcm_prepare(struct snd_pcm_substream *substream)
+{
+ struct snd_sgio2audio *chip = snd_pcm_substream_chip(substream);
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct snd_sgio2audio_chan *chan = substream->runtime->private_data;
+ int ch = chan->idx;
+ unsigned long flags;
+
+ spin_lock_irqsave(&chip->channel[ch].lock, flags);
+
+ /* Setup the pseudo-dma transfer pointers. */
+ chip->channel[ch].buffer = runtime->dma_area;
+ chip->channel[ch].pos = 0;
+ chip->channel[ch].size = 0;
+ chip->channel[ch].substream = substream;
+
+ /* set AD1843 format */
+ /* hardware format is always S16_LE */
+ switch (substream->stream) {
+ case SNDRV_PCM_STREAM_PLAYBACK:
+ ad1843_setup_dac(chip->ad1843,
+ ch - 1,
+ runtime->rate,
+ SNDRV_PCM_FORMAT_S16_LE,
+ runtime->channels);
+ break;
+ case SNDRV_PCM_STREAM_CAPTURE:
+ ad1843_setup_adc(chip->ad1843,
+ runtime->rate,
+ SNDRV_PCM_FORMAT_S16_LE,
+ runtime->channels);
+ break;
+ }
+ spin_unlock_irqrestore(&chip->channel[ch].lock, flags);
+ return 0;
+}
+
+/* trigger callback */
+static int snd_sgio2audio_pcm_trigger(struct snd_pcm_substream *substream,
+ int cmd)
+{
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ /* start the PCM engine */
+ snd_sgio2audio_dma_start(substream);
+ break;
+ case SNDRV_PCM_TRIGGER_STOP:
+ /* stop the PCM engine */
+ snd_sgio2audio_dma_stop(substream);
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/* pointer callback */
+static snd_pcm_uframes_t
+snd_sgio2audio_pcm_pointer(struct snd_pcm_substream *substream)
+{
+ struct snd_sgio2audio *chip = snd_pcm_substream_chip(substream);
+ struct snd_sgio2audio_chan *chan = substream->runtime->private_data;
+
+ /* get the current hardware pointer */
+ return bytes_to_frames(substream->runtime,
+ chip->channel[chan->idx].pos);
+}
+
+/* get the physical page pointer on the given offset */
+static struct page *snd_sgio2audio_page(struct snd_pcm_substream *substream,
+ unsigned long offset)
+{
+ return vmalloc_to_page(substream->runtime->dma_area + offset);
+}
+
+/* operators */
+static struct snd_pcm_ops snd_sgio2audio_playback_ops = {
+ .open = snd_sgio2audio_playback_open,
+ .close = snd_sgio2audio_playback_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = snd_sgio2audio_pcm_hw_params,
+ .hw_free = snd_sgio2audio_pcm_hw_free,
+ .prepare = snd_sgio2audio_pcm_prepare,
+ .trigger = snd_sgio2audio_pcm_trigger,
+ .pointer = snd_sgio2audio_pcm_pointer,
+ .page = snd_sgio2audio_page,
+};
+
+static struct snd_pcm_ops snd_sgio2audio_capture_ops = {
+ .open = snd_sgio2audio_capture_open,
+ .close = snd_sgio2audio_capture_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = snd_sgio2audio_pcm_hw_params,
+ .hw_free = snd_sgio2audio_pcm_hw_free,
+ .prepare = snd_sgio2audio_pcm_prepare,
+ .trigger = snd_sgio2audio_pcm_trigger,
+ .pointer = snd_sgio2audio_pcm_pointer,
+ .page = snd_sgio2audio_page,
+};
+
+/*
+ * definitions of capture are omitted here...
+ */
+
+/* create a pcm device */
+static int __devinit snd_sgio2audio_new_pcm(struct snd_sgio2audio *chip)
+{
+ struct snd_pcm *pcm;
+ int err;
+
+ /* create a new pcm device with two outputs and one input */
+ err = snd_pcm_new(chip->card, "SGI O2 Audio", 0, 2, 1, &pcm);
+ if (err < 0)
+ return err;
+
+ pcm->private_data = chip;
+ strcpy(pcm->name, "SGI O2 Audio");
+ chip->pcm = pcm;
+
+ /* set operators */
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
+ &snd_sgio2audio_playback_ops);
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE,
+ &snd_sgio2audio_capture_ops);
+ return 0;
+}
+
+/* ALSA driver */
+
+static int snd_sgio2audio_free(struct snd_sgio2audio *chip)
+{
+ int irq;
+
+ /* reset interface */
+ writeq(AUDIO_CONTROL_RESET, &mace->perif.audio.control);
+ udelay(1);
+ writeq(0, &mace->perif.audio.control);
+
+ /* release IRQ's */
+ for (irq = MACEISA_AUDIO_SW_IRQ; irq <= MACEISA_AUDIO3_MERR_IRQ; irq++)
+ free_irq(irq, chip);
+
+ dma_free_coherent(NULL, MACEISA_RINGBUFFERS_SIZE,
+ chip->ring_base, chip->ring_base_dma);
+
+ /* release card data */
+ kfree(chip);
+ return 0;
+}
+
+static int snd_sgio2audio_dev_free(struct snd_device *device)
+{
+ struct snd_sgio2audio *chip = device->device_data;
+ /* TODO: component destructor */
+ return snd_sgio2audio_free(chip);
+}
+
+static struct snd_device_ops ops = {
+ .dev_free = snd_sgio2audio_dev_free,
+};
+
+static int __devinit snd_sgio2audio_create(struct snd_card *card,
+ struct snd_sgio2audio **rchip)
+{
+ struct snd_sgio2audio *chip;
+ irqreturn_t (*isr)(int, void *);
+ int i, err, irq;
+ void *arg;
+ const char *desc;
+
+ *rchip = NULL;
+
+ /* check if a codec is attached to the interface */
+ /* (Audio or Audio/Video board present) */
+ if (!(readq(&mace->perif.audio.control) & AUDIO_CONTROL_CODEC_PRESENT))
+ return -ENOENT;
+
+ chip = kzalloc(sizeof(struct snd_sgio2audio), GFP_KERNEL);
+ if (chip == NULL)
+ return -ENOMEM;
+
+ chip->card = card;
+ chip->irq_start = MACEISA_AUDIO_SW_IRQ;
+ chip->irq_end = MACEISA_AUDIO3_MERR_IRQ;
+
+ chip->ring_base = dma_alloc_coherent(NULL, MACEISA_RINGBUFFERS_SIZE,
+ &chip->ring_base_dma, GFP_USER);
+ if (chip->ring_base == NULL) {
+ printk(KERN_ERR
+ "sgio2audio: could not allocate ring buffers\n");
+ kfree(chip);
+ return -ENOMEM;
+ }
+
+ spin_lock_init(&chip->ad1843_lock);
+
+ chip->volume = SGIO2AUDIO_MAX_VOLUME;
+
+ /* initialize channels */
+ for (i = 0; i < 3; i++) {
+ spin_lock_init(&chip->channel[i].lock);
+ chip->channel[i].idx = i;
+ }
+
+ /* allocate IRQs */
+ for (irq = chip->irq_start; irq <= chip->irq_end; irq++) {
+ switch (irq) {
+ case MACEISA_AUDIO1_DMAT_IRQ:
+ isr = snd_sgio2audio_dma_in_isr;
+ arg = &chip->channel[0];
+ desc = "Capture DMA Channel 0";
+ break;
+ case MACEISA_AUDIO2_DMAT_IRQ:
+ isr = snd_sgio2audio_dma_out_isr;
+ arg = &chip->channel[1];
+ desc = "Playback DMA Channel 1";
+ break;
+ case MACEISA_AUDIO3_DMAT_IRQ:
+ isr = snd_sgio2audio_dma_out_isr;
+ arg = &chip->channel[2];
+ desc = "Playback DMA Channel 2";
+ break;
+ default:
+ isr = snd_sgio2audio_misc_isr;
+ arg = chip;
+ desc = "Audio";
+ break;
+ }
+ if (request_irq(irq, isr, IRQF_SHARED, desc, arg)) {
+ snd_sgio2audio_free(chip);
+ printk(KERN_ERR
+ "sgio2audio: cannot allocate irq %d\n", irq);
+ return -EBUSY;
+ }
+ }
+
+ /* reset the interface */
+ writeq(AUDIO_CONTROL_RESET, &mace->perif.audio.control);
+ udelay(1);
+ writeq(0, &mace->perif.audio.control);
+ udelay(100); /* give time to recover */
+
+ /* set ring base */
+ writeq(chip->ring_base_dma, &mace->perif.ctrl.ringbase);
+
+ /* attach the AD1843 codec */
+ chip->ad1843 = &ad1843_ops;
+ chip->ad1843->chip = (void *) chip;
+
+ /* initialize the AD1843 codec */
+ err = ad1843_init(chip->ad1843);
+ if (err < 0) {
+ snd_sgio2audio_free(chip);
+ return err;
+ }
+
+ err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
+ if (err < 0) {
+ snd_sgio2audio_free(chip);
+ return err;
+ }
+ *rchip = chip;
+ return 0;
+}
+
+static int __devinit snd_sgio2audio_probe(struct platform_device *pdev)
+{
+ struct snd_card *card;
+ struct snd_sgio2audio *chip;
+ int err;
+
+ card = snd_card_new(index, id, THIS_MODULE, 0);
+ if (card == NULL)
+ return -ENOMEM;
+
+ err = snd_sgio2audio_create(card, &chip);
+ if (err < 0) {
+ snd_card_free(card);
+ return err;
+ }
+ snd_card_set_dev(card, &pdev->dev);
+
+ /* TODO : finish PCM, do mixer and /proc */
+ err = snd_sgio2audio_new_pcm(chip);
+ if (err < 0) {
+ snd_card_free(card);
+ return err;
+ }
+ err = snd_sgio2audio_new_mixer(chip);
+ if (err < 0) {
+ snd_card_free(card);
+ return err;
+ }
+
+ strcpy(card->driver, "SGI O2 Audio");
+ strcpy(card->shortname, "SGI O2 Audio");
+ sprintf(card->longname, "%s irq %i-%i",
+ card->shortname,
+ chip->irq_start, chip->irq_end);
+
+ err = snd_card_register(card);
+ if (err < 0) {
+ snd_card_free(card);
+ return err;
+ }
+ platform_set_drvdata(pdev, card);
+ return 0;
+}
+
+static int __exit snd_sgio2audio_remove(struct platform_device *pdev)
+{
+ struct snd_card *card = platform_get_drvdata(pdev);
+
+ snd_card_free(card);
+ platform_set_drvdata(pdev, NULL);
+ return 0;
+}
+
+static struct platform_driver sgio2audio_driver = {
+ .probe = snd_sgio2audio_probe,
+ .remove = __devexit_p(snd_sgio2audio_remove),
+ .driver = {
+ .name = "sgio2audio",
+ .owner = THIS_MODULE,
+ }
+};
+
+static int __init alsa_card_sgio2audio_init(void)
+{
+ return platform_driver_register(&sgio2audio_driver);
+}
+
+static void __exit alsa_card_sgio2audio_exit(void)
+{
+ platform_driver_unregister(&sgio2audio_driver);
+}
+
+module_init(alsa_card_sgio2audio_init)
+module_exit(alsa_card_sgio2audio_exit)
--
Crap can work. Given enough thrust pigs will fly, but it's not necessary a
good idea. [ RFC1925, 2.3 ]
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: SGI O2 sound driver v4
2008-06-29 22:35 ` SGI O2 sound driver v4 Thomas Bogendoerfer
@ 2008-07-02 23:21 ` Thomas Bogendoerfer
2008-07-04 22:51 ` SGI O2 sound driver v6 Thomas Bogendoerfer
0 siblings, 1 reply; 8+ messages in thread
From: Thomas Bogendoerfer @ 2008-07-02 23:21 UTC (permalink / raw)
To: linux-mips
On Mon, Jun 30, 2008 at 12:35:37AM +0200, Thomas Bogendoerfer wrote:
> > [...]
>
changes in v5:
- fixed contols
- got rid of wrong spinlocks
- setup two pcm devices
- moved button support to a new input driver
- restructered interrupt setup
TODO:
- test capture
- check inputs (mic/line/cd)
- add dma error interrupt handling
I'm planning to submit the different parts to the maintainers
after I've checked that capturing is working.
Thomas.
arch/mips/sgi-ip32/ip32-platform.c | 36 ++
drivers/input/misc/Kconfig | 10 +
drivers/input/misc/Makefile | 1 +
drivers/input/misc/sgio2_btns.c | 154 ++++++
include/sound/ad1843.h | 46 ++
sound/mips/Kconfig | 6 +
sound/mips/Makefile | 2 +
sound/mips/ad1843.c | 530 +++++++++++++++++++
sound/mips/sgio2audio.c | 986 ++++++++++++++++++++++++++++++++++++
9 files changed, 1771 insertions(+), 0 deletions(-)
diff --git a/arch/mips/sgi-ip32/ip32-platform.c b/arch/mips/sgi-ip32/ip32-platform.c
index 89a71f4..2ee401b 100644
--- a/arch/mips/sgi-ip32/ip32-platform.c
+++ b/arch/mips/sgi-ip32/ip32-platform.c
@@ -65,6 +65,42 @@ static __init int meth_devinit(void)
device_initcall(meth_devinit);
+static __init int sgio2audio_devinit(void)
+{
+ struct platform_device *pd;
+ int ret;
+
+ pd = platform_device_alloc("sgio2audio", -1);
+ if (!pd)
+ return -ENOMEM;
+
+ ret = platform_device_add(pd);
+ if (ret)
+ platform_device_put(pd);
+
+ return ret;
+}
+
+device_initcall(sgio2audio_devinit);
+
+static __init int sgio2btns_devinit(void)
+{
+ struct platform_device *pd;
+ int ret;
+
+ pd = platform_device_alloc("sgio2btns", -1);
+ if (!pd)
+ return -ENOMEM;
+
+ ret = platform_device_add(pd);
+ if (ret)
+ platform_device_put(pd);
+
+ return ret;
+}
+
+device_initcall(sgio2btns_devinit);
+
MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("8250 UART probe driver for SGI IP32 aka O2");
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 432699d..e33d7cb 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -189,6 +189,16 @@ config INPUT_UINPUT
To compile this driver as a module, choose M here: the
module will be called uinput.
+config INPUT_SGIO2_BTNS
+ tristate "SGI O2 volume button interface"
+ depends on SGI_IP32
+ select INPUT_POLLDEV
+ help
+ Say Y here if you want to support SGI O2 volume button interface.
+
+ To compile this driver as a module, choose M here: the
+ module will be called sgio_btns.
+
config HP_SDC_RTC
tristate "HP SDC Real Time Clock"
depends on GSC || HP300
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index ebd39f2..0e274f1 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -19,3 +19,4 @@ obj-$(CONFIG_INPUT_YEALINK) += yealink.o
obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
obj-$(CONFIG_INPUT_UINPUT) += uinput.o
obj-$(CONFIG_INPUT_APANEL) += apanel.o
+obj-$(CONFIG_INPUT_SGIO2_BTNS) += sgio2_btns.o
diff --git a/drivers/input/misc/sgio2_btns.c b/drivers/input/misc/sgio2_btns.c
new file mode 100644
index 0000000..83c9501
--- /dev/null
+++ b/drivers/input/misc/sgio2_btns.c
@@ -0,0 +1,154 @@
+/*
+ * Cobalt button interface driver.
+ *
+ * Copyright (C) 2007-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/init.h>
+#include <linux/input-polldev.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/ip32/mace.h>
+
+#define BUTTONS_POLL_INTERVAL 30 /* msec */
+#define BUTTONS_COUNT_THRESHOLD 3
+#define BUTTONS_STATUS_MASK 0xfe000000
+
+static const unsigned short sgio2_map[] = {
+ KEY_VOLUMEUP,
+ KEY_VOLUMEDOWN
+};
+
+struct buttons_dev {
+ struct input_polled_dev *poll_dev;
+ unsigned short keymap[ARRAY_SIZE(sgio2_map)];
+ int count[ARRAY_SIZE(sgio2_map)];
+ void __iomem *reg;
+};
+
+static void handle_buttons(struct input_polled_dev *dev)
+{
+ struct buttons_dev *bdev = dev->private;
+ struct input_dev *input = dev->input;
+ u64 status;
+ int i;
+
+ status = (readq(&mace->perif.audio.control) >> 24) & 3;
+
+ for (i = 0; i < ARRAY_SIZE(bdev->keymap); i++) {
+ if (status & (1U << i)) {
+ if (++bdev->count[i] == BUTTONS_COUNT_THRESHOLD) {
+ input_event(input, EV_MSC, MSC_SCAN, i);
+ input_report_key(input, bdev->keymap[i], 1);
+ input_sync(input);
+ }
+ } else {
+ if (bdev->count[i] >= BUTTONS_COUNT_THRESHOLD) {
+ input_event(input, EV_MSC, MSC_SCAN, i);
+ input_report_key(input, bdev->keymap[i], 0);
+ input_sync(input);
+ }
+ bdev->count[i] = 0;
+ }
+ }
+}
+
+static int __devinit sgio2_buttons_probe(struct platform_device *pdev)
+{
+ struct buttons_dev *bdev;
+ struct input_polled_dev *poll_dev;
+ struct input_dev *input;
+ int error, i;
+
+ bdev = kzalloc(sizeof(struct buttons_dev), GFP_KERNEL);
+ poll_dev = input_allocate_polled_device();
+ if (!bdev || !poll_dev) {
+ error = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ memcpy(bdev->keymap, sgio2_map, sizeof(bdev->keymap));
+
+ poll_dev->private = bdev;
+ poll_dev->poll = handle_buttons;
+ poll_dev->poll_interval = BUTTONS_POLL_INTERVAL;
+
+ input = poll_dev->input;
+ input->name = "SGI O2 buttons";
+ input->phys = "sgio2/input0";
+ input->id.bustype = BUS_HOST;
+ input->dev.parent = &pdev->dev;
+
+ input->keycode = bdev->keymap;
+ input->keycodemax = ARRAY_SIZE(bdev->keymap);
+ input->keycodesize = sizeof(unsigned short);
+
+ input_set_capability(input, EV_MSC, MSC_SCAN);
+ __set_bit(EV_KEY, input->evbit);
+ for (i = 0; i < ARRAY_SIZE(sgio2_map); i++)
+ __set_bit(bdev->keymap[i], input->keybit);
+ __clear_bit(KEY_RESERVED, input->keybit);
+
+ bdev->poll_dev = poll_dev;
+ dev_set_drvdata(&pdev->dev, bdev);
+
+ error = input_register_polled_device(poll_dev);
+ if (!error)
+ return 0;
+
+ err_free_mem:
+ input_free_polled_device(poll_dev);
+ kfree(bdev);
+ dev_set_drvdata(&pdev->dev, NULL);
+ return error;
+}
+
+static int __devexit sgio2_buttons_remove(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct buttons_dev *bdev = dev_get_drvdata(dev);
+
+ input_unregister_polled_device(bdev->poll_dev);
+ input_free_polled_device(bdev->poll_dev);
+ kfree(bdev);
+ dev_set_drvdata(dev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver sgio2_buttons_driver = {
+ .probe = sgio2_buttons_probe,
+ .remove = __devexit_p(sgio2_buttons_remove),
+ .driver = {
+ .name = "sgio2btns",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init sgio2_buttons_init(void)
+{
+ return platform_driver_register(&sgio2_buttons_driver);
+}
+
+static void __exit sgio2_buttons_exit(void)
+{
+ platform_driver_unregister(&sgio2_buttons_driver);
+}
+
+module_init(sgio2_buttons_init);
+module_exit(sgio2_buttons_exit);
diff --git a/include/sound/ad1843.h b/include/sound/ad1843.h
new file mode 100644
index 0000000..3892be9
--- /dev/null
+++ b/include/sound/ad1843.h
@@ -0,0 +1,46 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright 2003 Vivien Chappelier <vivien.chappelier@linux-mips.org>
+ * Copyright 2008 Thomas Bogendoerfer <tsbogend@franken.de>
+ */
+
+#ifndef __SOUND_AD1843_H
+#define __SOUND_AD1843_H
+
+struct snd_ad1843 {
+ void *chip;
+ int (*read)(void *chip, int reg);
+ int (*write)(void *chip, int reg, int val);
+};
+
+#define AD1843_GAIN_RECLEV 0
+#define AD1843_GAIN_LINE 1
+#define AD1843_GAIN_CD 2
+#define AD1843_GAIN_MIC 3
+#define AD1843_GAIN_PCM_0 4
+#define AD1843_GAIN_PCM_1 5
+#define AD1843_GAIN_SIZE (AD1843_GAIN_PCM_1+1)
+
+int ad1843_get_gain_max(struct snd_ad1843 *ad1843, int id);
+int ad1843_get_gain(struct snd_ad1843 *ad1843, int id);
+int ad1843_set_gain(struct snd_ad1843 *ad1843, int id, int newval);
+int ad1843_get_recsrc(struct snd_ad1843 *ad1843);
+int ad1843_set_recsrc(struct snd_ad1843 *ad1843, int newsrc);
+void ad1843_setup_dac(struct snd_ad1843 *ad1843,
+ unsigned int id,
+ unsigned int framerate,
+ snd_pcm_format_t fmt,
+ unsigned int channels);
+void ad1843_shutdown_dac(struct snd_ad1843 *ad1843,
+ unsigned int id);
+void ad1843_setup_adc(struct snd_ad1843 *ad1843,
+ unsigned int framerate,
+ snd_pcm_format_t fmt,
+ unsigned int channels);
+void ad1843_shutdown_adc(struct snd_ad1843 *ad1843);
+int ad1843_init(struct snd_ad1843 *ad1843);
+
+#endif /* __SOUND_AD1843_H */
diff --git a/sound/mips/Kconfig b/sound/mips/Kconfig
index 531f8ba..a3e202e 100644
--- a/sound/mips/Kconfig
+++ b/sound/mips/Kconfig
@@ -11,5 +11,11 @@ config SND_AU1X00
help
ALSA Sound driver for the Au1x00's AC97 port.
+config SND_SGI_O2
+ tristate "SGI O2 Audio"
+ depends on SND && SGI_IP32
+ help
+ Sound support for the SGI O2 Workstation.
+
endmenu
diff --git a/sound/mips/Makefile b/sound/mips/Makefile
index 47afed9..55624d8 100644
--- a/sound/mips/Makefile
+++ b/sound/mips/Makefile
@@ -2,7 +2,9 @@
# Makefile for ALSA
#
+snd-sgi-o2-objs := sgio2audio.o ad1843.o
snd-au1x00-objs := au1x00.o
# Toplevel Module Dependency
obj-$(CONFIG_SND_AU1X00) += snd-au1x00.o
+obj-$(CONFIG_SND_SGI_O2) += snd-sgi-o2.o
diff --git a/sound/mips/ad1843.c b/sound/mips/ad1843.c
new file mode 100644
index 0000000..f338390
--- /dev/null
+++ b/sound/mips/ad1843.c
@@ -0,0 +1,530 @@
+/*
+ * AD1843 low level driver
+ *
+ * Copyright 2003 Vivien Chappelier <vivien.chappelier@linux-mips.org>
+ * Copyright 2008 Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+ *
+ * inspired from vwsnd.c (SGI VW audio driver)
+ * Copyright 1999 Silicon Graphics, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/ad1843.h>
+
+/*
+ * AD1843 bitfield definitions. All are named as in the AD1843 data
+ * sheet, with ad1843_ prepended and individual bit numbers removed.
+ *
+ * E.g., bits LSS0 through LSS2 become ad1843_LSS.
+ *
+ * Only the bitfields we need are defined.
+ */
+
+struct ad1843_bitfield {
+ char reg;
+ char lo_bit;
+ char nbits;
+};
+
+static const struct ad1843_bitfield
+ ad1843_PDNO = { 0, 14, 1 }, /* Converter Power-Down Flag */
+ ad1843_INIT = { 0, 15, 1 }, /* Clock Initialization Flag */
+ ad1843_RIG = { 2, 0, 4 }, /* Right ADC Input Gain */
+ ad1843_RMGE = { 2, 4, 1 }, /* Right ADC Mic Gain Enable */
+ ad1843_RSS = { 2, 5, 3 }, /* Right ADC Source Select */
+ ad1843_LIG = { 2, 8, 4 }, /* Left ADC Input Gain */
+ ad1843_LMGE = { 2, 12, 1 }, /* Left ADC Mic Gain Enable */
+ ad1843_LSS = { 2, 13, 3 }, /* Left ADC Source Select */
+ ad1843_RD2M = { 3, 0, 5 }, /* Right DAC 2 Mix Gain/Atten */
+ ad1843_RD2MM = { 3, 7, 1 }, /* Right DAC 2 Mix Mute */
+ ad1843_LD2M = { 3, 8, 5 }, /* Left DAC 2 Mix Gain/Atten */
+ ad1843_LD2MM = { 3, 15, 1 }, /* Left DAC 2 Mix Mute */
+ ad1843_RX1M = { 4, 0, 5 }, /* Right Aux 1 Mix Gain/Atten */
+ ad1843_RX1MM = { 4, 7, 1 }, /* Right Aux 1 Mix Mute */
+ ad1843_LX1M = { 4, 8, 5 }, /* Left Aux 1 Mix Gain/Atten */
+ ad1843_LX1MM = { 4, 15, 1 }, /* Left Aux 1 Mix Mute */
+ ad1843_RX2M = { 5, 0, 5 }, /* Right Aux 2 Mix Gain/Atten */
+ ad1843_RX2MM = { 5, 7, 1 }, /* Right Aux 2 Mix Mute */
+ ad1843_LX2M = { 5, 8, 5 }, /* Left Aux 2 Mix Gain/Atten */
+ ad1843_LX2MM = { 5, 15, 1 }, /* Left Aux 2 Mix Mute */
+ ad1843_RMCM = { 7, 0, 5 }, /* Right Mic Mix Gain/Atten */
+ ad1843_RMCMM = { 7, 7, 1 }, /* Right Mic Mix Mute */
+ ad1843_LMCM = { 7, 8, 5 }, /* Left Mic Mix Gain/Atten */
+ ad1843_LMCMM = { 7, 15, 1 }, /* Left Mic Mix Mute */
+ ad1843_HPOS = { 8, 4, 1 }, /* Headphone Output Voltage Swing */
+ ad1843_HPOM = { 8, 5, 1 }, /* Headphone Output Mute */
+ ad1843_MPOM = { 8, 6, 1 }, /* Mono Output Mute */
+ ad1843_RDA1G = { 9, 0, 6 }, /* Right DAC1 Analog/Digital Gain */
+ ad1843_RDA1GM = { 9, 7, 1 }, /* Right DAC1 Analog Mute */
+ ad1843_LDA1G = { 9, 8, 6 }, /* Left DAC1 Analog/Digital Gain */
+ ad1843_LDA1GM = { 9, 15, 1 }, /* Left DAC1 Analog Mute */
+ ad1843_RDA2G = { 10, 0, 6 }, /* Right DAC2 Analog/Digital Gain */
+ ad1843_RDA2GM = { 10, 7, 1 }, /* Right DAC2 Analog Mute */
+ ad1843_LDA2G = { 10, 8, 6 }, /* Left DAC2 Analog/Digital Gain */
+ ad1843_LDA2GM = { 10, 15, 1 }, /* Left DAC2 Analog Mute */
+ ad1843_RDA1AM = { 11, 7, 1 }, /* Right DAC1 Digital Mute */
+ ad1843_LDA1AM = { 11, 15, 1 }, /* Left DAC1 Digital Mute */
+ ad1843_RDA2AM = { 12, 7, 1 }, /* Right DAC2 Digital Mute */
+ ad1843_LDA2AM = { 12, 15, 1 }, /* Left DAC2 Digital Mute */
+ ad1843_ADLC = { 15, 0, 2 }, /* ADC Left Sample Rate Source */
+ ad1843_ADRC = { 15, 2, 2 }, /* ADC Right Sample Rate Source */
+ ad1843_DA1C = { 15, 8, 2 }, /* DAC1 Sample Rate Source */
+ ad1843_DA2C = { 15, 10, 2 }, /* DAC2 Sample Rate Source */
+ ad1843_C1C = { 17, 0, 16 }, /* Clock 1 Sample Rate Select */
+ ad1843_C2C = { 20, 0, 16 }, /* Clock 2 Sample Rate Select */
+ ad1843_C3C = { 23, 0, 16 }, /* Clock 3 Sample Rate Select */
+ ad1843_DAADL = { 25, 4, 2 }, /* Digital ADC Left Source Select */
+ ad1843_DAADR = { 25, 6, 2 }, /* Digital ADC Right Source Select */
+ ad1843_DAMIX = { 25, 14, 1 }, /* DAC Digital Mix Enable */
+ ad1843_DRSFLT = { 25, 15, 1 }, /* Digital Reampler Filter Mode */
+ ad1843_ADLF = { 26, 0, 2 }, /* ADC Left Channel Data Format */
+ ad1843_ADRF = { 26, 2, 2 }, /* ADC Right Channel Data Format */
+ ad1843_ADTLK = { 26, 4, 1 }, /* ADC Transmit Lock Mode Select */
+ ad1843_SCF = { 26, 7, 1 }, /* SCLK Frequency Select */
+ ad1843_DA1F = { 26, 8, 2 }, /* DAC1 Data Format Select */
+ ad1843_DA2F = { 26, 10, 2 }, /* DAC2 Data Format Select */
+ ad1843_DA1SM = { 26, 14, 1 }, /* DAC1 Stereo/Mono Mode Select */
+ ad1843_DA2SM = { 26, 15, 1 }, /* DAC2 Stereo/Mono Mode Select */
+ ad1843_ADLEN = { 27, 0, 1 }, /* ADC Left Channel Enable */
+ ad1843_ADREN = { 27, 1, 1 }, /* ADC Right Channel Enable */
+ ad1843_AAMEN = { 27, 4, 1 }, /* Analog to Analog Mix Enable */
+ ad1843_ANAEN = { 27, 7, 1 }, /* Analog Channel Enable */
+ ad1843_DA1EN = { 27, 8, 1 }, /* DAC1 Enable */
+ ad1843_DA2EN = { 27, 9, 1 }, /* DAC2 Enable */
+ ad1843_DDMEN = { 27, 12, 1 }, /* DAC2 to DAC1 Mix Enable */
+ ad1843_C1EN = { 28, 11, 1 }, /* Clock Generator 1 Enable */
+ ad1843_C2EN = { 28, 12, 1 }, /* Clock Generator 2 Enable */
+ ad1843_C3EN = { 28, 13, 1 }, /* Clock Generator 3 Enable */
+ ad1843_PDNI = { 28, 15, 1 }; /* Converter Power Down */
+
+/*
+ * The various registers of the AD1843 use three different formats for
+ * specifying gain. The ad1843_gain structure parameterizes the
+ * formats.
+ */
+
+struct ad1843_gain {
+ int negative; /* nonzero if gain is negative. */
+ const struct ad1843_bitfield *lfield;
+ const struct ad1843_bitfield *rfield;
+};
+
+const struct ad1843_gain ad1843_gain_RECLEV = {
+ 0, &ad1843_LIG, &ad1843_RIG
+};
+const struct ad1843_gain ad1843_gain_LINE = {
+ 1, &ad1843_LX1M, &ad1843_RX1M
+};
+const struct ad1843_gain ad1843_gain_CD = {
+ 1, &ad1843_LX2M, &ad1843_RX2M
+};
+const struct ad1843_gain ad1843_gain_MIC = {
+ 1, &ad1843_LMCM, &ad1843_RMCM
+};
+const struct ad1843_gain ad1843_gain_PCM_0 = {
+ 1, &ad1843_LDA1G, &ad1843_RDA1G
+};
+const struct ad1843_gain ad1843_gain_PCM_1 = {
+ 1, &ad1843_LD2M, &ad1843_RD2M
+};
+
+const struct ad1843_gain *ad1843_gain[AD1843_GAIN_SIZE] =
+{
+ &ad1843_gain_RECLEV,
+ &ad1843_gain_LINE,
+ &ad1843_gain_CD,
+ &ad1843_gain_MIC,
+ &ad1843_gain_PCM_0,
+ &ad1843_gain_PCM_1,
+};
+
+/* read the current value of an AD1843 bitfield. */
+
+static int ad1843_read_bits(struct snd_ad1843 *ad1843,
+ const struct ad1843_bitfield *field)
+{
+ int w;
+
+ w = ad1843->read(ad1843->chip, field->reg);
+ return w >> field->lo_bit & ((1 << field->nbits) - 1);
+}
+
+/*
+ * write a new value to an AD1843 bitfield and return the old value.
+ */
+
+static int ad1843_write_bits(struct snd_ad1843 *ad1843,
+ const struct ad1843_bitfield *field,
+ int newval)
+{
+ int w, mask, oldval, newbits;
+
+ w = ad1843->read(ad1843->chip, field->reg);
+ mask = ((1 << field->nbits) - 1) << field->lo_bit;
+ oldval = (w & mask) >> field->lo_bit;
+ newbits = (newval << field->lo_bit) & mask;
+ w = (w & ~mask) | newbits;
+ ad1843->write(ad1843->chip, field->reg, w);
+
+ return oldval;
+}
+
+/*
+ * ad1843_read_multi reads multiple bitfields from the same AD1843
+ * register. It uses a single read cycle to do it. (Reading the
+ * ad1843 requires 256 bit times at 12.288 MHz, or nearly 20
+ * microseconds.)
+ *
+ * Called like this.
+ *
+ * ad1843_read_multi(ad1843, nfields,
+ * &ad1843_FIELD1, &val1,
+ * &ad1843_FIELD2, &val2, ...);
+ */
+
+static void ad1843_read_multi(struct snd_ad1843 *ad1843, int argcount, ...)
+{
+ va_list ap;
+ const struct ad1843_bitfield *fp;
+ int w = 0, mask, *value, reg = -1;
+
+ va_start(ap, argcount);
+ while (--argcount >= 0) {
+ fp = va_arg(ap, const struct ad1843_bitfield *);
+ value = va_arg(ap, int *);
+ if (reg == -1) {
+ reg = fp->reg;
+ w = ad1843->read(ad1843->chip, reg);
+ }
+
+ mask = (1 << fp->nbits) - 1;
+ *value = w >> fp->lo_bit & mask;
+ }
+ va_end(ap);
+}
+
+/*
+ * ad1843_write_multi stores multiple bitfields into the same AD1843
+ * register. It uses one read and one write cycle to do it.
+ *
+ * Called like this.
+ *
+ * ad1843_write_multi(ad1843, nfields,
+ * &ad1843_FIELD1, val1,
+ * &ad1843_FIELF2, val2, ...);
+ */
+
+static void ad1843_write_multi(struct snd_ad1843 *ad1843, int argcount, ...)
+{
+ va_list ap;
+ int reg;
+ const struct ad1843_bitfield *fp;
+ int value;
+ int w, m, mask, bits;
+
+ mask = 0;
+ bits = 0;
+ reg = -1;
+
+ va_start(ap, argcount);
+ while (--argcount >= 0) {
+ fp = va_arg(ap, const struct ad1843_bitfield *);
+ value = va_arg(ap, int);
+ if (reg == -1)
+ reg = fp->reg;
+ else
+ BUG_ON(reg != fp->reg);
+ m = ((1 << fp->nbits) - 1) << fp->lo_bit;
+ mask |= m;
+ bits |= (value << fp->lo_bit) & m;
+ }
+ va_end(ap);
+
+ if (~mask & 0xFFFF)
+ w = ad1843->read(ad1843->chip, reg);
+ else
+ w = 0;
+ w = (w & ~mask) | bits;
+ ad1843->write(ad1843->chip, reg, w);
+}
+
+int ad1843_get_gain_max(struct snd_ad1843 *ad1843, int id)
+{
+ const struct ad1843_gain *gp = ad1843_gain[id];
+
+ return (1 << gp->lfield->nbits) - 1;
+}
+
+/*
+ * ad1843_get_gain reads the specified register and extracts the gain value
+ * using the supplied gain type.
+ */
+
+int ad1843_get_gain(struct snd_ad1843 *ad1843, int id)
+{
+ int lg, rg;
+ const struct ad1843_gain *gp = ad1843_gain[id];
+ unsigned short mask = (1 << gp->lfield->nbits) - 1;
+
+ ad1843_read_multi(ad1843, 2, gp->lfield, &lg, gp->rfield, &rg);
+ if (gp->negative) {
+ lg = mask - lg;
+ rg = mask - rg;
+ }
+ return lg << 0 | rg << 8;
+}
+
+/*
+ * Set an audio channel's gain.
+ *
+ * Returns the new gain, which may be lower than the old gain.
+ */
+
+int ad1843_set_gain(struct snd_ad1843 *ad1843, int id, int newval)
+{
+ const struct ad1843_gain *gp = ad1843_gain[id];
+ unsigned short mask = (1 << gp->lfield->nbits) - 1;
+
+ int lg = (newval >> 0) & mask;
+ int rg = (newval >> 8) & mask;
+
+ if (gp->negative) {
+ lg = mask - lg;
+ rg = mask - rg;
+ }
+ ad1843_write_multi(ad1843, 2, gp->lfield, lg, gp->rfield, rg);
+ return ad1843_get_gain(ad1843, id);
+}
+
+/* Returns the current recording source */
+
+int ad1843_get_recsrc(struct snd_ad1843 *ad1843)
+{
+ int val = ad1843_read_bits(ad1843, &ad1843_LSS);
+
+ if (val < 1 || val > 3) {
+ val = 1;
+ ad1843_write_multi(ad1843, 2,
+ &ad1843_LSS, val, &ad1843_RSS, val);
+ }
+ return val - 1;
+}
+
+/*
+ * Set recording source.
+ *
+ * Returns newsrc on success, -errno on failure.
+ */
+
+int ad1843_set_recsrc(struct snd_ad1843 *ad1843, int newsrc)
+{
+ if (newsrc < 1 || newsrc > 3)
+ return -EINVAL;
+
+ newsrc--;
+ ad1843_write_multi(ad1843, 2, &ad1843_LSS, newsrc, &ad1843_RSS, newsrc);
+ return newsrc;
+}
+
+/* Setup ad1843 for D/A conversion. */
+
+void ad1843_setup_dac(struct snd_ad1843 *ad1843,
+ unsigned int id,
+ unsigned int framerate,
+ snd_pcm_format_t fmt,
+ unsigned int channels)
+{
+ int ad_fmt = 0, ad_mode = 0;
+
+ switch (fmt) {
+ case SNDRV_PCM_FORMAT_S8:
+ ad_fmt = 0;
+ break;
+ case SNDRV_PCM_FORMAT_U8:
+ ad_fmt = 0;
+ break;
+ case SNDRV_PCM_FORMAT_S16_LE:
+ ad_fmt = 1;
+ break;
+ case SNDRV_PCM_FORMAT_MU_LAW:
+ ad_fmt = 2;
+ break;
+ case SNDRV_PCM_FORMAT_A_LAW:
+ ad_fmt = 3;
+ break;
+ default:
+ break;
+ }
+
+ switch (channels) {
+ case 2:
+ ad_mode = 0;
+ break;
+ case 1:
+ ad_mode = 1;
+ break;
+ default:
+ break;
+ }
+
+ if (id) {
+ ad1843_write_bits(ad1843, &ad1843_C2C, framerate);
+ ad1843_write_multi(ad1843, 2,
+ &ad1843_DA2SM, ad_mode,
+ &ad1843_DA2F, ad_fmt);
+ } else {
+ ad1843_write_bits(ad1843, &ad1843_C1C, framerate);
+ ad1843_write_multi(ad1843, 2,
+ &ad1843_DA1SM, ad_mode,
+ &ad1843_DA1F, ad_fmt);
+ }
+}
+
+void ad1843_shutdown_dac(struct snd_ad1843 *ad1843, unsigned int id)
+{
+ if (id)
+ ad1843_write_bits(ad1843, &ad1843_DA2F, 1);
+ else
+ ad1843_write_bits(ad1843, &ad1843_DA1F, 1);
+}
+
+void ad1843_setup_adc(struct snd_ad1843 *ad1843,
+ unsigned int framerate,
+ snd_pcm_format_t fmt,
+ unsigned int channels)
+{
+ int da_fmt = 0;
+
+ switch (fmt) {
+ case SNDRV_PCM_FORMAT_S8: da_fmt = 0; break;
+ case SNDRV_PCM_FORMAT_U8: da_fmt = 0; break;
+ case SNDRV_PCM_FORMAT_S16_LE: da_fmt = 1; break;
+ case SNDRV_PCM_FORMAT_MU_LAW: da_fmt = 2; break;
+ case SNDRV_PCM_FORMAT_A_LAW: da_fmt = 3; break;
+ default: break;
+ }
+
+ ad1843_write_bits(ad1843, &ad1843_C3C, framerate);
+ ad1843_write_multi(ad1843, 2,
+ &ad1843_ADLF, da_fmt, &ad1843_ADRF, da_fmt);
+}
+
+void ad1843_shutdown_adc(struct snd_ad1843 *ad1843)
+{
+ /* nothing to do */
+}
+
+/*
+ * Fully initialize the ad1843. As described in the AD1843 data
+ * sheet, section "START-UP SEQUENCE". The numbered comments are
+ * subsection headings from the data sheet. See the data sheet, pages
+ * 52-54, for more info.
+ *
+ * return 0 on success, -errno on failure. */
+
+int ad1843_init(struct snd_ad1843 *ad1843)
+{
+ unsigned long later;
+
+ if (ad1843_read_bits(ad1843, &ad1843_INIT) != 0) {
+ printk(KERN_ERR "ad1843: AD1843 won't initialize\n");
+ return -EIO;
+ }
+
+ ad1843_write_bits(ad1843, &ad1843_SCF, 1);
+
+ /* 4. Put the conversion resources into standby. */
+ ad1843_write_bits(ad1843, &ad1843_PDNI, 0);
+ later = jiffies + HZ / 2; /* roughly half a second */
+
+ while (ad1843_read_bits(ad1843, &ad1843_PDNO)) {
+ if (time_after(jiffies, later)) {
+ printk(KERN_ERR
+ "ad1843: AD1843 won't power up\n");
+ return -EIO;
+ }
+ schedule();
+ }
+
+ /* 5. Power up the clock generators and enable clock output pins. */
+ ad1843_write_multi(ad1843, 3,
+ &ad1843_C1EN, 1,
+ &ad1843_C2EN, 1,
+ &ad1843_C3EN, 1);
+
+ /* 6. Configure conversion resources while they are in standby. */
+
+ /* DAC1/2 use clock 1/2 as source, ADC uses clock 3. Always. */
+ ad1843_write_multi(ad1843, 4,
+ &ad1843_DA1C, 1,
+ &ad1843_DA2C, 2,
+ &ad1843_ADLC, 3,
+ &ad1843_ADRC, 3);
+
+ /* 7. Enable conversion resources. */
+ ad1843_write_bits(ad1843, &ad1843_ADTLK, 1);
+ ad1843_write_multi(ad1843, 7,
+ &ad1843_ANAEN, 1,
+ &ad1843_AAMEN, 1,
+ &ad1843_DA1EN, 1,
+ &ad1843_DA2EN, 1,
+ &ad1843_DDMEN, 1,
+ &ad1843_ADLEN, 1,
+ &ad1843_ADREN, 1);
+
+ /* 8. Configure conversion resources while they are enabled. */
+
+ /* set gain to 0 for all channels */
+ ad1843_set_gain(ad1843, AD1843_GAIN_RECLEV, 0);
+ ad1843_set_gain(ad1843, AD1843_GAIN_LINE, 0);
+ ad1843_set_gain(ad1843, AD1843_GAIN_CD, 0);
+ ad1843_set_gain(ad1843, AD1843_GAIN_MIC, 0);
+ ad1843_set_gain(ad1843, AD1843_GAIN_PCM_0, 0);
+ ad1843_set_gain(ad1843, AD1843_GAIN_PCM_1, 0);
+
+ /* Unmute all channels. */
+ /* DAC1 */
+ ad1843_write_multi(ad1843, 2, &ad1843_LDA1GM, 0, &ad1843_RDA1GM, 0);
+ ad1843_write_multi(ad1843, 2, &ad1843_LDA1AM, 0, &ad1843_RDA1AM, 0);
+ /* Line In */
+ ad1843_write_multi(ad1843, 2, &ad1843_LX1MM, 0, &ad1843_RX1MM, 0);
+ /* CD */
+ ad1843_write_multi(ad1843, 2, &ad1843_LX2MM, 0, &ad1843_RX2MM, 0);
+ /* Mic */
+ ad1843_write_multi(ad1843, 2, &ad1843_LMCMM, 0, &ad1843_RMCMM, 0);
+ /* DAC2 */
+ ad1843_write_multi(ad1843, 2, &ad1843_LD2MM, 0, &ad1843_RD2MM, 0);
+
+ /* Set default recording source to Line In and set
+ * mic gain to +20 dB.
+ */
+ ad1843_set_recsrc(ad1843, 2);
+ ad1843_write_multi(ad1843, 2, &ad1843_LMGE, 1, &ad1843_RMGE, 1);
+
+ /* Set Speaker Out level to +/- 4V and unmute it. */
+ ad1843_write_multi(ad1843, 3,
+ &ad1843_HPOS, 1,
+ &ad1843_HPOM, 0,
+ &ad1843_MPOM, 0);
+
+ return 0;
+}
diff --git a/sound/mips/sgio2audio.c b/sound/mips/sgio2audio.c
new file mode 100644
index 0000000..6c1528e
--- /dev/null
+++ b/sound/mips/sgio2audio.c
@@ -0,0 +1,986 @@
+/*
+ * Sound driver for Silicon Graphics O2 Workstations A/V board audio.
+ *
+ * Copyright 2003 Vivien Chappelier <vivien.chappelier@linux-mips.org>
+ * Copyright 2008 Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+ * Mxier part taken from mace_audio.c:
+ * Copyright 2007 Thorben Jändling <tj.trevelyan@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/gfp.h>
+#include <linux/vmalloc.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <asm/ip32/ip32_ints.h>
+#include <asm/ip32/mace.h>
+
+#include <sound/core.h>
+#include <sound/control.h>
+#include <sound/pcm.h>
+#define SNDRV_GET_ID
+#include <sound/initval.h>
+#include <sound/ad1843.h>
+
+
+MODULE_AUTHOR("Vivien Chappelier <vivien.chappelier@linux-mips.org>");
+MODULE_DESCRIPTION("SGI O2 Audio");
+MODULE_LICENSE("GPL");
+MODULE_SUPPORTED_DEVICE("{{Silicon Graphics, O2 Audio}}");
+
+static int index = SNDRV_DEFAULT_IDX1; /* Index 0-MAX */
+static char *id = SNDRV_DEFAULT_STR1; /* ID for this card */
+
+module_param(index, int, 0444);
+MODULE_PARM_DESC(index, "Index value for SGI O2 soundcard.");
+module_param(id, charp, 0444);
+MODULE_PARM_DESC(id, "ID string for SGI O2 soundcard.");
+
+
+#define SGIO2AUDIO_MAX_VOLUME 31
+
+#define AUDIO_CONTROL_RESET BIT(0) /* 1: reset audio interface */
+#define AUDIO_CONTROL_CODEC_PRESENT BIT(1) /* 1: codec detected */
+
+#define CODEC_CONTROL_WORD_SHIFT 0
+#define CODEC_CONTROL_READ BIT(16)
+#define CODEC_CONTROL_ADDRESS_SHIFT 17
+
+#define CHANNEL_CONTROL_RESET BIT(10) /* 1: reset channel */
+#define CHANNEL_DMA_ENABLE BIT(9) /* 1: enable DMA transfer */
+#define CHANNEL_INT_THRESHOLD_DISABLED (0 << 5) /* interrupt disabled */
+#define CHANNEL_INT_THRESHOLD_25 (1 << 5) /* int on buffer >25% full */
+#define CHANNEL_INT_THRESHOLD_50 (2 << 5) /* int on buffer >50% full */
+#define CHANNEL_INT_THRESHOLD_75 (3 << 5) /* int on buffer >75% full */
+#define CHANNEL_INT_THRESHOLD_EMPTY (4 << 5) /* int on buffer empty */
+#define CHANNEL_INT_THRESHOLD_NOT_EMPTY (5 << 5) /* int on buffer !empty */
+#define CHANNEL_INT_THRESHOLD_FULL (6 << 5) /* int on buffer empty */
+#define CHANNEL_INT_THRESHOLD_NOT_FULL (7 << 5) /* int on buffer !empty */
+
+#define CHANNEL_RING_SHIFT 12
+#define CHANNEL_RING_SIZE (1 << CHANNEL_RING_SHIFT)
+#define CHANNEL_RING_MASK (CHANNEL_RING_SIZE - 1)
+
+#define CHANNEL_LEFT_SHIFT 40
+#define CHANNEL_RIGHT_SHIFT 8
+
+struct snd_sgio2audio_chan {
+ int idx;
+ struct snd_pcm_substream *substream;
+ int pos;
+ snd_pcm_uframes_t size;
+ spinlock_t lock;
+};
+
+/* definition of the chip-specific record */
+struct snd_sgio2audio {
+ struct snd_card *card;
+
+ /* codec */
+ struct snd_ad1843 ad1843;
+ spinlock_t ad1843_lock;
+
+ /* channels */
+ struct snd_sgio2audio_chan channel[3];
+
+ /* properties */
+ int volume;
+
+ /* resources */
+ void *ring_base;
+ dma_addr_t ring_base_dma;
+};
+
+/* AD1843 access */
+
+/*
+ * read_ad1843_reg returns the current contents of a 16 bit AD1843 register.
+ *
+ * Returns unsigned register value on success, -errno on failure.
+ */
+static int read_ad1843_reg(void *priv, int reg)
+{
+ struct snd_sgio2audio *chip = priv;
+ int val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&chip->ad1843_lock, flags);
+
+ writeq((reg << CODEC_CONTROL_ADDRESS_SHIFT) |
+ CODEC_CONTROL_READ, &mace->perif.audio.codec_control);
+ wmb();
+ val = readq(&mace->perif.audio.codec_control); /* flush bus */
+ udelay(200);
+
+ val = readq(&mace->perif.audio.codec_read);
+
+ spin_unlock_irqrestore(&chip->ad1843_lock, flags);
+ return val;
+}
+
+/*
+ * write_ad1843_reg writes the specified value to a 16 bit AD1843 register.
+ */
+static int write_ad1843_reg(void *priv, int reg, int word)
+{
+ struct snd_sgio2audio *chip = priv;
+ int val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&chip->ad1843_lock, flags);
+
+ writeq((reg << CODEC_CONTROL_ADDRESS_SHIFT) |
+ (word << CODEC_CONTROL_WORD_SHIFT),
+ &mace->perif.audio.codec_control);
+ wmb();
+ val = readq(&mace->perif.audio.codec_control); /* flush bus */
+ udelay(200);
+
+ spin_unlock_irqrestore(&chip->ad1843_lock, flags);
+ return 0;
+}
+
+static int sgio2audio_gain_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ struct snd_sgio2audio *chip = snd_kcontrol_chip(kcontrol);
+
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 2;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = ad1843_get_gain_max(&chip->ad1843,
+ (int)kcontrol->private_value);
+ return 0;
+}
+
+static int sgio2audio_gain_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_sgio2audio *chip = snd_kcontrol_chip(kcontrol);
+ int vol;
+
+ vol = ad1843_get_gain(&chip->ad1843, (int)kcontrol->private_value);
+
+ ucontrol->value.integer.value[0] = (vol >> 8) & 0xFF;
+ ucontrol->value.integer.value[1] = vol & 0xFF;
+
+ return 0;
+}
+
+static int sgio2audio_gain_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_sgio2audio *chip = snd_kcontrol_chip(kcontrol);
+ int newvol, oldvol;
+
+ oldvol = ad1843_get_gain(&chip->ad1843, kcontrol->private_value);
+ newvol = (ucontrol->value.integer.value[0] << 8) |
+ ucontrol->value.integer.value[1];
+
+ newvol = ad1843_set_gain(&chip->ad1843, kcontrol->private_value,
+ newvol);
+
+ return newvol != oldvol;
+}
+
+static int sgio2audio_source_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ static const char *texts[3] = {
+ "Line In", "Mic", "CD"
+ };
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+ uinfo->count = 1;
+ uinfo->value.enumerated.items = 3;
+ if (uinfo->value.enumerated.item >= 3)
+ uinfo->value.enumerated.item = 1;
+ strcpy(uinfo->value.enumerated.name,
+ texts[uinfo->value.enumerated.item]);
+ return 0;
+}
+
+static int sgio2audio_source_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_sgio2audio *chip = snd_kcontrol_chip(kcontrol);
+
+ ucontrol->value.enumerated.item[0] = ad1843_get_recsrc(&chip->ad1843);
+ return 0;
+}
+
+static int sgio2audio_source_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_sgio2audio *chip = snd_kcontrol_chip(kcontrol);
+ int newsrc, oldsrc;
+
+ oldsrc = ad1843_get_recsrc(&chip->ad1843);
+ newsrc = ad1843_set_recsrc(&chip->ad1843,
+ ucontrol->value.enumerated.item[0]);
+
+ return newsrc != oldsrc;
+}
+
+/* dac1/pcm0 mixer control */
+static struct snd_kcontrol_new sgio2audio_ctrl_pcm0 __devinitdata = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Playback 0 Volume",
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .private_value = AD1843_GAIN_PCM_0,
+ .info = sgio2audio_gain_info,
+ .get = sgio2audio_gain_get,
+ .put = sgio2audio_gain_put,
+};
+
+/* dac2/pcm1 mixer control */
+static struct snd_kcontrol_new sgio2audio_ctrl_pcm1 __devinitdata = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Playback 1 Volume",
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .private_value = AD1843_GAIN_PCM_1,
+ .info = sgio2audio_gain_info,
+ .get = sgio2audio_gain_get,
+ .put = sgio2audio_gain_put,
+};
+
+/* record level mixer control */
+static struct snd_kcontrol_new sgio2audio_ctrl_reclevel __devinitdata = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Capture Volume",
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .private_value = AD1843_GAIN_RECLEV,
+ .info = sgio2audio_gain_info,
+ .get = sgio2audio_gain_get,
+ .put = sgio2audio_gain_put,
+};
+
+/* record level source control */
+static struct snd_kcontrol_new sgio2audio_ctrl_recsource __devinitdata = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Capture Source",
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .info = sgio2audio_source_info,
+ .get = sgio2audio_source_get,
+ .put = sgio2audio_source_put,
+};
+
+/* line mixer control */
+static struct snd_kcontrol_new sgio2audio_ctrl_line __devinitdata = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Line Volume",
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .private_value = AD1843_GAIN_LINE,
+ .info = sgio2audio_gain_info,
+ .get = sgio2audio_gain_get,
+ .put = sgio2audio_gain_put,
+};
+
+/* cd mixer control */
+static struct snd_kcontrol_new sgio2audio_ctrl_cd __devinitdata = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "CD Volume",
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .private_value = AD1843_GAIN_CD,
+ .info = sgio2audio_gain_info,
+ .get = sgio2audio_gain_get,
+ .put = sgio2audio_gain_put,
+};
+
+/* mic mixer control */
+static struct snd_kcontrol_new sgio2audio_ctrl_mic __devinitdata = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Mic Volume",
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .private_value = AD1843_GAIN_MIC,
+ .info = sgio2audio_gain_info,
+ .get = sgio2audio_gain_get,
+ .put = sgio2audio_gain_put,
+};
+
+
+static int __devinit snd_sgio2audio_new_mixer(struct snd_sgio2audio *chip)
+{
+ int err;
+
+ err = snd_ctl_add(chip->card,
+ snd_ctl_new1(&sgio2audio_ctrl_pcm0, chip));
+ if (err < 0)
+ return err;
+
+ err = snd_ctl_add(chip->card,
+ snd_ctl_new1(&sgio2audio_ctrl_pcm1, chip));
+ if (err < 0)
+ return err;
+
+ err = snd_ctl_add(chip->card,
+ snd_ctl_new1(&sgio2audio_ctrl_reclevel, chip));
+ if (err < 0)
+ return err;
+
+ err = snd_ctl_add(chip->card,
+ snd_ctl_new1(&sgio2audio_ctrl_recsource, chip));
+ if (err < 0)
+ return err;
+ err = snd_ctl_add(chip->card,
+ snd_ctl_new1(&sgio2audio_ctrl_line, chip));
+ if (err < 0)
+ return err;
+
+ err = snd_ctl_add(chip->card,
+ snd_ctl_new1(&sgio2audio_ctrl_cd, chip));
+ if (err < 0)
+ return err;
+
+ err = snd_ctl_add(chip->card,
+ snd_ctl_new1(&sgio2audio_ctrl_mic, chip));
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+/* low-level audio interface DMA */
+
+/* get data out of bounce buffer, count must be a multiple of 32 */
+/* returns 1 if a period has elapsed */
+static int snd_sgio2audio_dma_pull_frag(struct snd_sgio2audio *chip,
+ unsigned int ch, unsigned int count)
+{
+ int ret;
+ unsigned long src_base, src_pos, dst_mask;
+ unsigned char *dst_base;
+ int dst_pos;
+ u64 *src;
+ s16 *dst;
+ u64 x;
+ unsigned long flags;
+ struct snd_pcm_runtime *runtime = chip->channel[ch].substream->runtime;
+
+ spin_lock_irqsave(&chip->channel[ch].lock, flags);
+
+ src_base = (unsigned long) chip->ring_base | (ch << CHANNEL_RING_SHIFT);
+ src_pos = readq(&mace->perif.audio.chan[ch].read_ptr);
+ dst_base = runtime->dma_area;
+ dst_pos = chip->channel[ch].pos;
+ dst_mask = frames_to_bytes(runtime, runtime->buffer_size) - 1;
+
+ /* check if a period has elapsed */
+ chip->channel[ch].size += (count >> 3); /* in frames */
+ ret = chip->channel[ch].size >= runtime->period_size;
+ chip->channel[ch].size %= runtime->period_size;
+
+ while (count) {
+ src = (u64 *)(src_base + src_pos);
+ dst = (s16 *)(dst_base + dst_pos);
+
+ x = *src;
+ dst[0] = (x >> CHANNEL_LEFT_SHIFT) & 0xffff;
+ dst[1] = (x >> CHANNEL_RIGHT_SHIFT) & 0xffff;
+
+ src_pos = (src_pos + sizeof(u64)) & CHANNEL_RING_MASK;
+ dst_pos = (dst_pos + 2 * sizeof(s16)) & dst_mask;
+ count -= sizeof(u64);
+ }
+
+ writeq(src_pos, &mace->perif.audio.chan[ch].read_ptr); /* in bytes */
+ chip->channel[ch].pos = dst_pos;
+
+ spin_unlock_irqrestore(&chip->channel[ch].lock, flags);
+ return ret;
+}
+
+/* put some DMA data in bounce buffer, count must be a multiple of 32 */
+/* returns 1 if a period has elapsed */
+static int snd_sgio2audio_dma_push_frag(struct snd_sgio2audio *chip,
+ unsigned int ch, unsigned int count)
+{
+ int ret;
+ s64 l, r;
+ unsigned long dst_base, dst_pos, src_mask;
+ unsigned char *src_base;
+ int src_pos;
+ u64 *dst;
+ s16 *src;
+ unsigned long flags;
+ struct snd_pcm_runtime *runtime = chip->channel[ch].substream->runtime;
+
+ spin_lock_irqsave(&chip->channel[ch].lock, flags);
+
+ dst_base = (unsigned long)chip->ring_base | (ch << CHANNEL_RING_SHIFT);
+ dst_pos = readq(&mace->perif.audio.chan[ch].write_ptr);
+ src_base = runtime->dma_area;
+ src_pos = chip->channel[ch].pos;
+ src_mask = frames_to_bytes(runtime, runtime->buffer_size) - 1;
+
+ /* check if a period has elapsed */
+ chip->channel[ch].size += (count >> 3); /* in frames */
+ ret = chip->channel[ch].size >= runtime->period_size;
+ chip->channel[ch].size %= runtime->period_size;
+
+ while (count) {
+ src = (s16 *)(src_base + src_pos);
+ dst = (u64 *)(dst_base + dst_pos);
+
+ l = src[0]; /* sign extend */
+ r = src[1]; /* sign extend */
+
+ *dst = ((l & 0x00ffffff) << CHANNEL_LEFT_SHIFT) |
+ ((r & 0x00ffffff) << CHANNEL_RIGHT_SHIFT);
+
+ dst_pos = (dst_pos + sizeof(u64)) & CHANNEL_RING_MASK;
+ src_pos = (src_pos + 2 * sizeof(s16)) & src_mask;
+ count -= sizeof(u64);
+ }
+
+ writeq(dst_pos, &mace->perif.audio.chan[ch].write_ptr); /* in bytes */
+ chip->channel[ch].pos = src_pos;
+
+ spin_unlock_irqrestore(&chip->channel[ch].lock, flags);
+ return ret;
+}
+
+static int snd_sgio2audio_dma_start(struct snd_pcm_substream *substream)
+{
+ struct snd_sgio2audio *chip = snd_pcm_substream_chip(substream);
+ struct snd_sgio2audio_chan *chan = substream->runtime->private_data;
+ int ch = chan->idx;
+
+ /* reset DMA channel */
+ writeq(CHANNEL_CONTROL_RESET, &mace->perif.audio.chan[ch].control);
+ udelay(10);
+ writeq(0, &mace->perif.audio.chan[ch].control);
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ /* push a full buffer */
+ snd_sgio2audio_dma_push_frag(chip, ch, CHANNEL_RING_SIZE - 32);
+ }
+ /* set DMA to wake on 50% empty and enable interrupt */
+ writeq(CHANNEL_DMA_ENABLE | CHANNEL_INT_THRESHOLD_50,
+ &mace->perif.audio.chan[ch].control);
+ return 0;
+}
+
+static int snd_sgio2audio_dma_stop(struct snd_pcm_substream *substream)
+{
+ struct snd_sgio2audio_chan *chan = substream->runtime->private_data;
+
+ writeq(0, &mace->perif.audio.chan[chan->idx].control);
+ return 0;
+}
+
+static irqreturn_t snd_sgio2audio_dma_in_isr(int irq, void *dev_id)
+{
+ struct snd_sgio2audio_chan *chan = dev_id;
+ struct snd_pcm_substream *substream;
+ struct snd_sgio2audio *chip;
+ int count, ch;
+
+ substream = chan->substream;
+ chip = snd_pcm_substream_chip(substream);
+ ch = chan->idx;
+
+ /* empty the ring */
+ count = CHANNEL_RING_SIZE -
+ readq(&mace->perif.audio.chan[ch].depth) - 32;
+ if (snd_sgio2audio_dma_pull_frag(chip, ch, count))
+ snd_pcm_period_elapsed(substream);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t snd_sgio2audio_dma_out_isr(int irq, void *dev_id)
+{
+ struct snd_sgio2audio_chan *chan = dev_id;
+ struct snd_pcm_substream *substream;
+ struct snd_sgio2audio *chip;
+ int count, ch;
+
+ substream = chan->substream;
+ chip = snd_pcm_substream_chip(substream);
+ ch = chan->idx;
+ /* fill the ring */
+ count = CHANNEL_RING_SIZE -
+ readq(&mace->perif.audio.chan[ch].depth) - 32;
+ if (snd_sgio2audio_dma_push_frag(chip, ch, count))
+ snd_pcm_period_elapsed(substream);
+
+ return IRQ_HANDLED;
+}
+
+/* PCM part */
+/* PCM hardware definition */
+static struct snd_pcm_hardware snd_sgio2audio_playback_hw = {
+ .info = (SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER),
+ .formats = SNDRV_PCM_FMTBIT_S16_BE,
+ .rates = SNDRV_PCM_RATE_8000_48000,
+ .rate_min = 8000,
+ .rate_max = 48000,
+ .channels_min = 2,
+ .channels_max = 2,
+ .buffer_bytes_max = 65536,
+ .period_bytes_min = 32768,
+ .period_bytes_max = 65536,
+ .periods_min = 1,
+ .periods_max = 1024,
+};
+
+/* PCM playback open callback */
+static int snd_sgio2audio_playback1_open(struct snd_pcm_substream *substream)
+{
+ struct snd_sgio2audio *chip = snd_pcm_substream_chip(substream);
+ struct snd_pcm_runtime *runtime = substream->runtime;
+
+ runtime->hw = snd_sgio2audio_playback_hw;
+ runtime->private_data = &chip->channel[1];
+ return 0;
+}
+
+static int snd_sgio2audio_playback2_open(struct snd_pcm_substream *substream)
+{
+ struct snd_sgio2audio *chip = snd_pcm_substream_chip(substream);
+ struct snd_pcm_runtime *runtime = substream->runtime;
+
+ runtime->hw = snd_sgio2audio_playback_hw;
+ runtime->private_data = &chip->channel[2];
+ return 0;
+}
+
+/* PCM playback close callback */
+static int snd_sgio2audio_playback_close(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+
+ runtime->private_data = NULL;
+ return 0;
+}
+
+/* PCM capture open callback */
+static int snd_sgio2audio_capture_open(struct snd_pcm_substream *substream)
+{
+ struct snd_sgio2audio *chip = snd_pcm_substream_chip(substream);
+ struct snd_pcm_runtime *runtime = substream->runtime;
+
+ runtime->hw = snd_sgio2audio_playback_hw;
+ runtime->private_data = &chip->channel[0];
+ return 0;
+}
+
+/* PCM capture close callback */
+static int snd_sgio2audio_capture_close(struct snd_pcm_substream *substream)
+{
+ return 0;
+}
+
+
+/* hw_params callback */
+static int snd_sgio2audio_pcm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *hw_params)
+{
+ /* alloc virtual 'dma' area */
+ if (substream->runtime->dma_area)
+ vfree(substream->runtime->dma_area);
+ substream->runtime->dma_area = vmalloc(params_buffer_bytes(hw_params));
+ if (substream->runtime->dma_area == NULL)
+ return -ENOMEM;
+ return 0;
+}
+
+/* hw_free callback */
+static int snd_sgio2audio_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+ if (substream->runtime->dma_area)
+ vfree(substream->runtime->dma_area);
+ substream->runtime->dma_area = NULL;
+ return 0;
+}
+
+/* prepare callback */
+static int snd_sgio2audio_pcm_prepare(struct snd_pcm_substream *substream)
+{
+ struct snd_sgio2audio *chip = snd_pcm_substream_chip(substream);
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct snd_sgio2audio_chan *chan = substream->runtime->private_data;
+ int ch = chan->idx;
+ unsigned long flags;
+
+ spin_lock_irqsave(&chip->channel[ch].lock, flags);
+
+ /* Setup the pseudo-dma transfer pointers. */
+ chip->channel[ch].pos = 0;
+ chip->channel[ch].size = 0;
+ chip->channel[ch].substream = substream;
+
+ /* set AD1843 format */
+ /* hardware format is always S16_LE */
+ switch (substream->stream) {
+ case SNDRV_PCM_STREAM_PLAYBACK:
+ ad1843_setup_dac(&chip->ad1843,
+ ch - 1,
+ runtime->rate,
+ SNDRV_PCM_FORMAT_S16_LE,
+ runtime->channels);
+ break;
+ case SNDRV_PCM_STREAM_CAPTURE:
+ ad1843_setup_adc(&chip->ad1843,
+ runtime->rate,
+ SNDRV_PCM_FORMAT_S16_LE,
+ runtime->channels);
+ break;
+ }
+ spin_unlock_irqrestore(&chip->channel[ch].lock, flags);
+ return 0;
+}
+
+/* trigger callback */
+static int snd_sgio2audio_pcm_trigger(struct snd_pcm_substream *substream,
+ int cmd)
+{
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ /* start the PCM engine */
+ snd_sgio2audio_dma_start(substream);
+ break;
+ case SNDRV_PCM_TRIGGER_STOP:
+ /* stop the PCM engine */
+ snd_sgio2audio_dma_stop(substream);
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/* pointer callback */
+static snd_pcm_uframes_t
+snd_sgio2audio_pcm_pointer(struct snd_pcm_substream *substream)
+{
+ struct snd_sgio2audio *chip = snd_pcm_substream_chip(substream);
+ struct snd_sgio2audio_chan *chan = substream->runtime->private_data;
+
+ /* get the current hardware pointer */
+ return bytes_to_frames(substream->runtime,
+ chip->channel[chan->idx].pos);
+}
+
+/* get the physical page pointer on the given offset */
+static struct page *snd_sgio2audio_page(struct snd_pcm_substream *substream,
+ unsigned long offset)
+{
+ return vmalloc_to_page(substream->runtime->dma_area + offset);
+}
+
+/* operators */
+static struct snd_pcm_ops snd_sgio2audio_playback1_ops = {
+ .open = snd_sgio2audio_playback1_open,
+ .close = snd_sgio2audio_playback_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = snd_sgio2audio_pcm_hw_params,
+ .hw_free = snd_sgio2audio_pcm_hw_free,
+ .prepare = snd_sgio2audio_pcm_prepare,
+ .trigger = snd_sgio2audio_pcm_trigger,
+ .pointer = snd_sgio2audio_pcm_pointer,
+ .page = snd_sgio2audio_page,
+};
+
+static struct snd_pcm_ops snd_sgio2audio_playback2_ops = {
+ .open = snd_sgio2audio_playback2_open,
+ .close = snd_sgio2audio_playback_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = snd_sgio2audio_pcm_hw_params,
+ .hw_free = snd_sgio2audio_pcm_hw_free,
+ .prepare = snd_sgio2audio_pcm_prepare,
+ .trigger = snd_sgio2audio_pcm_trigger,
+ .pointer = snd_sgio2audio_pcm_pointer,
+ .page = snd_sgio2audio_page,
+};
+
+static struct snd_pcm_ops snd_sgio2audio_capture_ops = {
+ .open = snd_sgio2audio_capture_open,
+ .close = snd_sgio2audio_capture_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = snd_sgio2audio_pcm_hw_params,
+ .hw_free = snd_sgio2audio_pcm_hw_free,
+ .prepare = snd_sgio2audio_pcm_prepare,
+ .trigger = snd_sgio2audio_pcm_trigger,
+ .pointer = snd_sgio2audio_pcm_pointer,
+ .page = snd_sgio2audio_page,
+};
+
+/*
+ * definitions of capture are omitted here...
+ */
+
+/* create a pcm device */
+static int __devinit snd_sgio2audio_new_pcm(struct snd_sgio2audio *chip)
+{
+ struct snd_pcm *pcm;
+ int err;
+
+ /* create first pcm device with one outputs and one input */
+ err = snd_pcm_new(chip->card, "SGI O2 Audio", 0, 1, 1, &pcm);
+ if (err < 0)
+ return err;
+
+ pcm->private_data = chip;
+ strcpy(pcm->name, "SGI O2 DAC1");
+
+ /* set operators */
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
+ &snd_sgio2audio_playback1_ops);
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE,
+ &snd_sgio2audio_capture_ops);
+
+ /* create second pcm device with one outputs and no input */
+ err = snd_pcm_new(chip->card, "SGI O2 Audio", 1, 1, 0, &pcm);
+ if (err < 0)
+ return err;
+
+ pcm->private_data = chip;
+ strcpy(pcm->name, "SGI O2 DAC2");
+
+ /* set operators */
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
+ &snd_sgio2audio_playback2_ops);
+
+ return 0;
+}
+
+static struct {
+ int idx;
+ int irq;
+ irqreturn_t (*isr)(int, void *);
+ const char *desc;
+} snd_sgio2_isr_table[] = {
+ {
+ .idx = 0,
+ .irq = MACEISA_AUDIO1_DMAT_IRQ,
+ .isr = snd_sgio2audio_dma_in_isr,
+ .desc = "Capture DMA Channel 0"
+ }, {
+ .idx = 1,
+ .irq = MACEISA_AUDIO2_DMAT_IRQ,
+ .isr = snd_sgio2audio_dma_out_isr,
+ .desc = "Playback DMA Channel 1"
+ }, {
+ .idx = 2,
+ .irq = MACEISA_AUDIO3_DMAT_IRQ,
+ .isr = snd_sgio2audio_dma_out_isr,
+ .desc = "Playback DMA Channel 2"
+ }
+};
+
+/* ALSA driver */
+
+static int snd_sgio2audio_free(struct snd_sgio2audio *chip)
+{
+ int i;
+
+ /* reset interface */
+ writeq(AUDIO_CONTROL_RESET, &mace->perif.audio.control);
+ udelay(1);
+ writeq(0, &mace->perif.audio.control);
+
+ /* release IRQ's */
+ for (i = 0; i < ARRAY_SIZE(snd_sgio2_isr_table); i++)
+ free_irq(snd_sgio2_isr_table[i].irq,
+ &chip->channel[snd_sgio2_isr_table[i].idx]);
+
+ dma_free_coherent(NULL, MACEISA_RINGBUFFERS_SIZE,
+ chip->ring_base, chip->ring_base_dma);
+
+ /* release card data */
+ kfree(chip);
+ return 0;
+}
+
+static int snd_sgio2audio_dev_free(struct snd_device *device)
+{
+ struct snd_sgio2audio *chip = device->device_data;
+ /* TODO: component destructor */
+ return snd_sgio2audio_free(chip);
+}
+
+static struct snd_device_ops ops = {
+ .dev_free = snd_sgio2audio_dev_free,
+};
+
+static int __devinit snd_sgio2audio_create(struct snd_card *card,
+ struct snd_sgio2audio **rchip)
+{
+ struct snd_sgio2audio *chip;
+ int i, err;
+
+ *rchip = NULL;
+
+ /* check if a codec is attached to the interface */
+ /* (Audio or Audio/Video board present) */
+ if (!(readq(&mace->perif.audio.control) & AUDIO_CONTROL_CODEC_PRESENT))
+ return -ENOENT;
+
+ chip = kzalloc(sizeof(struct snd_sgio2audio), GFP_KERNEL);
+ if (chip == NULL)
+ return -ENOMEM;
+
+ chip->card = card;
+
+ chip->ring_base = dma_alloc_coherent(NULL, MACEISA_RINGBUFFERS_SIZE,
+ &chip->ring_base_dma, GFP_USER);
+ if (chip->ring_base == NULL) {
+ printk(KERN_ERR
+ "sgio2audio: could not allocate ring buffers\n");
+ kfree(chip);
+ return -ENOMEM;
+ }
+
+ spin_lock_init(&chip->ad1843_lock);
+
+ chip->volume = SGIO2AUDIO_MAX_VOLUME;
+
+ /* initialize channels */
+ for (i = 0; i < 3; i++) {
+ spin_lock_init(&chip->channel[i].lock);
+ chip->channel[i].idx = i;
+ }
+
+ /* allocate IRQs */
+ for (i = 0; i < ARRAY_SIZE(snd_sgio2_isr_table); i++) {
+ if (request_irq(snd_sgio2_isr_table[i].irq,
+ snd_sgio2_isr_table[i].isr,
+ IRQF_SHARED,
+ snd_sgio2_isr_table[i].desc,
+ &chip->channel[snd_sgio2_isr_table[i].idx])) {
+ snd_sgio2audio_free(chip);
+ printk(KERN_ERR "sgio2audio: cannot allocate irq %d\n",
+ snd_sgio2_isr_table[i].irq);
+ return -EBUSY;
+ }
+ }
+
+ /* reset the interface */
+ writeq(AUDIO_CONTROL_RESET, &mace->perif.audio.control);
+ udelay(1);
+ writeq(0, &mace->perif.audio.control);
+ udelay(100); /* give time to recover */
+
+ /* set ring base */
+ writeq(chip->ring_base_dma, &mace->perif.ctrl.ringbase);
+
+ /* attach the AD1843 codec */
+ chip->ad1843.read = read_ad1843_reg;
+ chip->ad1843.write = write_ad1843_reg;
+ chip->ad1843.chip = chip;
+
+ /* initialize the AD1843 codec */
+ err = ad1843_init(&chip->ad1843);
+ if (err < 0) {
+ snd_sgio2audio_free(chip);
+ return err;
+ }
+
+ err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
+ if (err < 0) {
+ snd_sgio2audio_free(chip);
+ return err;
+ }
+ *rchip = chip;
+ return 0;
+}
+
+static int __devinit snd_sgio2audio_probe(struct platform_device *pdev)
+{
+ struct snd_card *card;
+ struct snd_sgio2audio *chip;
+ int err;
+
+ card = snd_card_new(index, id, THIS_MODULE, 0);
+ if (card == NULL)
+ return -ENOMEM;
+
+ err = snd_sgio2audio_create(card, &chip);
+ if (err < 0) {
+ snd_card_free(card);
+ return err;
+ }
+ snd_card_set_dev(card, &pdev->dev);
+
+ /* TODO : finish PCM, do mixer and /proc */
+ err = snd_sgio2audio_new_pcm(chip);
+ if (err < 0) {
+ snd_card_free(card);
+ return err;
+ }
+ err = snd_sgio2audio_new_mixer(chip);
+ if (err < 0) {
+ snd_card_free(card);
+ return err;
+ }
+
+ strcpy(card->driver, "SGI O2 Audio");
+ strcpy(card->shortname, "SGI O2 Audio");
+ sprintf(card->longname, "%s irq %i-%i",
+ card->shortname,
+ MACEISA_AUDIO1_DMAT_IRQ,
+ MACEISA_AUDIO3_MERR_IRQ);
+
+ err = snd_card_register(card);
+ if (err < 0) {
+ snd_card_free(card);
+ return err;
+ }
+ platform_set_drvdata(pdev, card);
+ return 0;
+}
+
+static int __exit snd_sgio2audio_remove(struct platform_device *pdev)
+{
+ struct snd_card *card = platform_get_drvdata(pdev);
+
+ snd_card_free(card);
+ platform_set_drvdata(pdev, NULL);
+ return 0;
+}
+
+static struct platform_driver sgio2audio_driver = {
+ .probe = snd_sgio2audio_probe,
+ .remove = __devexit_p(snd_sgio2audio_remove),
+ .driver = {
+ .name = "sgio2audio",
+ .owner = THIS_MODULE,
+ }
+};
+
+static int __init alsa_card_sgio2audio_init(void)
+{
+ return platform_driver_register(&sgio2audio_driver);
+}
+
+static void __exit alsa_card_sgio2audio_exit(void)
+{
+ platform_driver_unregister(&sgio2audio_driver);
+}
+
+module_init(alsa_card_sgio2audio_init)
+module_exit(alsa_card_sgio2audio_exit)
--
Crap can work. Given enough thrust pigs will fly, but it's not necessary a
good idea. [ RFC1925, 2.3 ]
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: SGI O2 sound driver v6
2008-07-02 23:21 ` Thomas Bogendoerfer
@ 2008-07-04 22:51 ` Thomas Bogendoerfer
2008-07-05 7:04 ` Martin Michlmayr
0 siblings, 1 reply; 8+ messages in thread
From: Thomas Bogendoerfer @ 2008-07-04 22:51 UTC (permalink / raw)
To: linux-mips
On Thu, Jul 03, 2008 at 01:21:18AM +0200, Thomas Bogendoerfer wrote:
> [...]
changes in v6:
- fixed mmap setup
- capture is working now
- reworked all mixer controls
- added dma error interrupt
- fixed button detection in input driver
This is the final complete patch. I'm now going to split the patch
into pieces for submission to the different maintainers.
Thomas.
arch/mips/sgi-ip32/ip32-platform.c | 36 ++
drivers/input/misc/Kconfig | 10 +
drivers/input/misc/Makefile | 1 +
drivers/input/misc/sgio2_btns.c | 154 ++++++
include/sound/ad1843.h | 46 ++
sound/mips/Kconfig | 6 +
sound/mips/Makefile | 2 +
sound/mips/ad1843.c | 539 +++++++++++++++++++
sound/mips/sgio2audio.c | 1013 ++++++++++++++++++++++++++++++++++++
9 files changed, 1807 insertions(+), 0 deletions(-)
diff --git a/arch/mips/sgi-ip32/ip32-platform.c b/arch/mips/sgi-ip32/ip32-platform.c
index 89a71f4..2ee401b 100644
--- a/arch/mips/sgi-ip32/ip32-platform.c
+++ b/arch/mips/sgi-ip32/ip32-platform.c
@@ -65,6 +65,42 @@ static __init int meth_devinit(void)
device_initcall(meth_devinit);
+static __init int sgio2audio_devinit(void)
+{
+ struct platform_device *pd;
+ int ret;
+
+ pd = platform_device_alloc("sgio2audio", -1);
+ if (!pd)
+ return -ENOMEM;
+
+ ret = platform_device_add(pd);
+ if (ret)
+ platform_device_put(pd);
+
+ return ret;
+}
+
+device_initcall(sgio2audio_devinit);
+
+static __init int sgio2btns_devinit(void)
+{
+ struct platform_device *pd;
+ int ret;
+
+ pd = platform_device_alloc("sgio2btns", -1);
+ if (!pd)
+ return -ENOMEM;
+
+ ret = platform_device_add(pd);
+ if (ret)
+ platform_device_put(pd);
+
+ return ret;
+}
+
+device_initcall(sgio2btns_devinit);
+
MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("8250 UART probe driver for SGI IP32 aka O2");
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 432699d..e33d7cb 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -189,6 +189,16 @@ config INPUT_UINPUT
To compile this driver as a module, choose M here: the
module will be called uinput.
+config INPUT_SGIO2_BTNS
+ tristate "SGI O2 volume button interface"
+ depends on SGI_IP32
+ select INPUT_POLLDEV
+ help
+ Say Y here if you want to support SGI O2 volume button interface.
+
+ To compile this driver as a module, choose M here: the
+ module will be called sgio_btns.
+
config HP_SDC_RTC
tristate "HP SDC Real Time Clock"
depends on GSC || HP300
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index ebd39f2..0e274f1 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -19,3 +19,4 @@ obj-$(CONFIG_INPUT_YEALINK) += yealink.o
obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
obj-$(CONFIG_INPUT_UINPUT) += uinput.o
obj-$(CONFIG_INPUT_APANEL) += apanel.o
+obj-$(CONFIG_INPUT_SGIO2_BTNS) += sgio2_btns.o
diff --git a/drivers/input/misc/sgio2_btns.c b/drivers/input/misc/sgio2_btns.c
new file mode 100644
index 0000000..5029873
--- /dev/null
+++ b/drivers/input/misc/sgio2_btns.c
@@ -0,0 +1,154 @@
+/*
+ * Cobalt button interface driver.
+ *
+ * Copyright (C) 2007-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/init.h>
+#include <linux/input-polldev.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/ip32/mace.h>
+
+#define BUTTONS_POLL_INTERVAL 30 /* msec */
+#define BUTTONS_COUNT_THRESHOLD 3
+
+static const unsigned short sgio2_map[] = {
+ KEY_VOLUMEUP,
+ KEY_VOLUMEDOWN
+};
+
+struct buttons_dev {
+ struct input_polled_dev *poll_dev;
+ unsigned short keymap[ARRAY_SIZE(sgio2_map)];
+ int count[ARRAY_SIZE(sgio2_map)];
+ void __iomem *reg;
+};
+
+static void handle_buttons(struct input_polled_dev *dev)
+{
+ struct buttons_dev *bdev = dev->private;
+ struct input_dev *input = dev->input;
+ u64 status;
+ int i;
+
+ status = (readq(&mace->perif.audio.control) >> 23) & 3;
+
+ for (i = 0; i < ARRAY_SIZE(bdev->keymap); i++) {
+ if (status & (1U << i)) {
+ writeq(status & ~(1U << i), &mace->perif.audio.control);
+ if (++bdev->count[i] == BUTTONS_COUNT_THRESHOLD) {
+ input_event(input, EV_MSC, MSC_SCAN, i);
+ input_report_key(input, bdev->keymap[i], 1);
+ input_sync(input);
+ }
+ } else {
+ if (bdev->count[i] >= BUTTONS_COUNT_THRESHOLD) {
+ input_event(input, EV_MSC, MSC_SCAN, i);
+ input_report_key(input, bdev->keymap[i], 0);
+ input_sync(input);
+ }
+ bdev->count[i] = 0;
+ }
+ }
+}
+
+static int __devinit sgio2_buttons_probe(struct platform_device *pdev)
+{
+ struct buttons_dev *bdev;
+ struct input_polled_dev *poll_dev;
+ struct input_dev *input;
+ int error, i;
+
+ bdev = kzalloc(sizeof(struct buttons_dev), GFP_KERNEL);
+ poll_dev = input_allocate_polled_device();
+ if (!bdev || !poll_dev) {
+ error = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ memcpy(bdev->keymap, sgio2_map, sizeof(bdev->keymap));
+
+ poll_dev->private = bdev;
+ poll_dev->poll = handle_buttons;
+ poll_dev->poll_interval = BUTTONS_POLL_INTERVAL;
+
+ input = poll_dev->input;
+ input->name = "SGI O2 buttons";
+ input->phys = "sgio2/input0";
+ input->id.bustype = BUS_HOST;
+ input->dev.parent = &pdev->dev;
+
+ input->keycode = bdev->keymap;
+ input->keycodemax = ARRAY_SIZE(bdev->keymap);
+ input->keycodesize = sizeof(unsigned short);
+
+ input_set_capability(input, EV_MSC, MSC_SCAN);
+ __set_bit(EV_KEY, input->evbit);
+ for (i = 0; i < ARRAY_SIZE(sgio2_map); i++)
+ __set_bit(bdev->keymap[i], input->keybit);
+ __clear_bit(KEY_RESERVED, input->keybit);
+
+ bdev->poll_dev = poll_dev;
+ dev_set_drvdata(&pdev->dev, bdev);
+
+ error = input_register_polled_device(poll_dev);
+ if (!error)
+ return 0;
+
+ err_free_mem:
+ input_free_polled_device(poll_dev);
+ kfree(bdev);
+ dev_set_drvdata(&pdev->dev, NULL);
+ return error;
+}
+
+static int __devexit sgio2_buttons_remove(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct buttons_dev *bdev = dev_get_drvdata(dev);
+
+ input_unregister_polled_device(bdev->poll_dev);
+ input_free_polled_device(bdev->poll_dev);
+ kfree(bdev);
+ dev_set_drvdata(dev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver sgio2_buttons_driver = {
+ .probe = sgio2_buttons_probe,
+ .remove = __devexit_p(sgio2_buttons_remove),
+ .driver = {
+ .name = "sgio2btns",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init sgio2_buttons_init(void)
+{
+ return platform_driver_register(&sgio2_buttons_driver);
+}
+
+static void __exit sgio2_buttons_exit(void)
+{
+ platform_driver_unregister(&sgio2_buttons_driver);
+}
+
+module_init(sgio2_buttons_init);
+module_exit(sgio2_buttons_exit);
diff --git a/include/sound/ad1843.h b/include/sound/ad1843.h
new file mode 100644
index 0000000..b236a9d
--- /dev/null
+++ b/include/sound/ad1843.h
@@ -0,0 +1,46 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright 2003 Vivien Chappelier <vivien.chappelier@linux-mips.org>
+ * Copyright 2008 Thomas Bogendoerfer <tsbogend@franken.de>
+ */
+
+#ifndef __SOUND_AD1843_H
+#define __SOUND_AD1843_H
+
+struct snd_ad1843 {
+ void *chip;
+ int (*read)(void *chip, int reg);
+ int (*write)(void *chip, int reg, int val);
+};
+
+#define AD1843_GAIN_RECLEV 0
+#define AD1843_GAIN_LINE 1
+#define AD1843_GAIN_LINE_2 2
+#define AD1843_GAIN_MIC 3
+#define AD1843_GAIN_PCM_0 4
+#define AD1843_GAIN_PCM_1 5
+#define AD1843_GAIN_SIZE (AD1843_GAIN_PCM_1+1)
+
+int ad1843_get_gain_max(struct snd_ad1843 *ad1843, int id);
+int ad1843_get_gain(struct snd_ad1843 *ad1843, int id);
+int ad1843_set_gain(struct snd_ad1843 *ad1843, int id, int newval);
+int ad1843_get_recsrc(struct snd_ad1843 *ad1843);
+int ad1843_set_recsrc(struct snd_ad1843 *ad1843, int newsrc);
+void ad1843_setup_dac(struct snd_ad1843 *ad1843,
+ unsigned int id,
+ unsigned int framerate,
+ snd_pcm_format_t fmt,
+ unsigned int channels);
+void ad1843_shutdown_dac(struct snd_ad1843 *ad1843,
+ unsigned int id);
+void ad1843_setup_adc(struct snd_ad1843 *ad1843,
+ unsigned int framerate,
+ snd_pcm_format_t fmt,
+ unsigned int channels);
+void ad1843_shutdown_adc(struct snd_ad1843 *ad1843);
+int ad1843_init(struct snd_ad1843 *ad1843);
+
+#endif /* __SOUND_AD1843_H */
diff --git a/sound/mips/Kconfig b/sound/mips/Kconfig
index 531f8ba..a3e202e 100644
--- a/sound/mips/Kconfig
+++ b/sound/mips/Kconfig
@@ -11,5 +11,11 @@ config SND_AU1X00
help
ALSA Sound driver for the Au1x00's AC97 port.
+config SND_SGI_O2
+ tristate "SGI O2 Audio"
+ depends on SND && SGI_IP32
+ help
+ Sound support for the SGI O2 Workstation.
+
endmenu
diff --git a/sound/mips/Makefile b/sound/mips/Makefile
index 47afed9..55624d8 100644
--- a/sound/mips/Makefile
+++ b/sound/mips/Makefile
@@ -2,7 +2,9 @@
# Makefile for ALSA
#
+snd-sgi-o2-objs := sgio2audio.o ad1843.o
snd-au1x00-objs := au1x00.o
# Toplevel Module Dependency
obj-$(CONFIG_SND_AU1X00) += snd-au1x00.o
+obj-$(CONFIG_SND_SGI_O2) += snd-sgi-o2.o
diff --git a/sound/mips/ad1843.c b/sound/mips/ad1843.c
new file mode 100644
index 0000000..76bdf68
--- /dev/null
+++ b/sound/mips/ad1843.c
@@ -0,0 +1,539 @@
+/*
+ * AD1843 low level driver
+ *
+ * Copyright 2003 Vivien Chappelier <vivien.chappelier@linux-mips.org>
+ * Copyright 2008 Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+ *
+ * inspired from vwsnd.c (SGI VW audio driver)
+ * Copyright 1999 Silicon Graphics, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/ad1843.h>
+
+/*
+ * AD1843 bitfield definitions. All are named as in the AD1843 data
+ * sheet, with ad1843_ prepended and individual bit numbers removed.
+ *
+ * E.g., bits LSS0 through LSS2 become ad1843_LSS.
+ *
+ * Only the bitfields we need are defined.
+ */
+
+struct ad1843_bitfield {
+ char reg;
+ char lo_bit;
+ char nbits;
+};
+
+static const struct ad1843_bitfield
+ ad1843_PDNO = { 0, 14, 1 }, /* Converter Power-Down Flag */
+ ad1843_INIT = { 0, 15, 1 }, /* Clock Initialization Flag */
+ ad1843_RIG = { 2, 0, 4 }, /* Right ADC Input Gain */
+ ad1843_RMGE = { 2, 4, 1 }, /* Right ADC Mic Gain Enable */
+ ad1843_RSS = { 2, 5, 3 }, /* Right ADC Source Select */
+ ad1843_LIG = { 2, 8, 4 }, /* Left ADC Input Gain */
+ ad1843_LMGE = { 2, 12, 1 }, /* Left ADC Mic Gain Enable */
+ ad1843_LSS = { 2, 13, 3 }, /* Left ADC Source Select */
+ ad1843_RD2M = { 3, 0, 5 }, /* Right DAC 2 Mix Gain/Atten */
+ ad1843_RD2MM = { 3, 7, 1 }, /* Right DAC 2 Mix Mute */
+ ad1843_LD2M = { 3, 8, 5 }, /* Left DAC 2 Mix Gain/Atten */
+ ad1843_LD2MM = { 3, 15, 1 }, /* Left DAC 2 Mix Mute */
+ ad1843_RX1M = { 4, 0, 5 }, /* Right Aux 1 Mix Gain/Atten */
+ ad1843_RX1MM = { 4, 7, 1 }, /* Right Aux 1 Mix Mute */
+ ad1843_LX1M = { 4, 8, 5 }, /* Left Aux 1 Mix Gain/Atten */
+ ad1843_LX1MM = { 4, 15, 1 }, /* Left Aux 1 Mix Mute */
+ ad1843_RX2M = { 5, 0, 5 }, /* Right Aux 2 Mix Gain/Atten */
+ ad1843_RX2MM = { 5, 7, 1 }, /* Right Aux 2 Mix Mute */
+ ad1843_LX2M = { 5, 8, 5 }, /* Left Aux 2 Mix Gain/Atten */
+ ad1843_LX2MM = { 5, 15, 1 }, /* Left Aux 2 Mix Mute */
+ ad1843_RMCM = { 7, 0, 5 }, /* Right Mic Mix Gain/Atten */
+ ad1843_RMCMM = { 7, 7, 1 }, /* Right Mic Mix Mute */
+ ad1843_LMCM = { 7, 8, 5 }, /* Left Mic Mix Gain/Atten */
+ ad1843_LMCMM = { 7, 15, 1 }, /* Left Mic Mix Mute */
+ ad1843_HPOS = { 8, 4, 1 }, /* Headphone Output Voltage Swing */
+ ad1843_HPOM = { 8, 5, 1 }, /* Headphone Output Mute */
+ ad1843_MPOM = { 8, 6, 1 }, /* Mono Output Mute */
+ ad1843_RDA1G = { 9, 0, 6 }, /* Right DAC1 Analog/Digital Gain */
+ ad1843_RDA1GM = { 9, 7, 1 }, /* Right DAC1 Analog Mute */
+ ad1843_LDA1G = { 9, 8, 6 }, /* Left DAC1 Analog/Digital Gain */
+ ad1843_LDA1GM = { 9, 15, 1 }, /* Left DAC1 Analog Mute */
+ ad1843_RDA2G = { 10, 0, 6 }, /* Right DAC2 Analog/Digital Gain */
+ ad1843_RDA2GM = { 10, 7, 1 }, /* Right DAC2 Analog Mute */
+ ad1843_LDA2G = { 10, 8, 6 }, /* Left DAC2 Analog/Digital Gain */
+ ad1843_LDA2GM = { 10, 15, 1 }, /* Left DAC2 Analog Mute */
+ ad1843_RDA1AM = { 11, 7, 1 }, /* Right DAC1 Digital Mute */
+ ad1843_LDA1AM = { 11, 15, 1 }, /* Left DAC1 Digital Mute */
+ ad1843_RDA2AM = { 12, 7, 1 }, /* Right DAC2 Digital Mute */
+ ad1843_LDA2AM = { 12, 15, 1 }, /* Left DAC2 Digital Mute */
+ ad1843_ADLC = { 15, 0, 2 }, /* ADC Left Sample Rate Source */
+ ad1843_ADRC = { 15, 2, 2 }, /* ADC Right Sample Rate Source */
+ ad1843_DA1C = { 15, 8, 2 }, /* DAC1 Sample Rate Source */
+ ad1843_DA2C = { 15, 10, 2 }, /* DAC2 Sample Rate Source */
+ ad1843_C1C = { 17, 0, 16 }, /* Clock 1 Sample Rate Select */
+ ad1843_C2C = { 20, 0, 16 }, /* Clock 2 Sample Rate Select */
+ ad1843_C3C = { 23, 0, 16 }, /* Clock 3 Sample Rate Select */
+ ad1843_DAADL = { 25, 4, 2 }, /* Digital ADC Left Source Select */
+ ad1843_DAADR = { 25, 6, 2 }, /* Digital ADC Right Source Select */
+ ad1843_DAMIX = { 25, 14, 1 }, /* DAC Digital Mix Enable */
+ ad1843_DRSFLT = { 25, 15, 1 }, /* Digital Reampler Filter Mode */
+ ad1843_ADLF = { 26, 0, 2 }, /* ADC Left Channel Data Format */
+ ad1843_ADRF = { 26, 2, 2 }, /* ADC Right Channel Data Format */
+ ad1843_ADTLK = { 26, 4, 1 }, /* ADC Transmit Lock Mode Select */
+ ad1843_SCF = { 26, 7, 1 }, /* SCLK Frequency Select */
+ ad1843_DA1F = { 26, 8, 2 }, /* DAC1 Data Format Select */
+ ad1843_DA2F = { 26, 10, 2 }, /* DAC2 Data Format Select */
+ ad1843_DA1SM = { 26, 14, 1 }, /* DAC1 Stereo/Mono Mode Select */
+ ad1843_DA2SM = { 26, 15, 1 }, /* DAC2 Stereo/Mono Mode Select */
+ ad1843_ADLEN = { 27, 0, 1 }, /* ADC Left Channel Enable */
+ ad1843_ADREN = { 27, 1, 1 }, /* ADC Right Channel Enable */
+ ad1843_AAMEN = { 27, 4, 1 }, /* Analog to Analog Mix Enable */
+ ad1843_ANAEN = { 27, 7, 1 }, /* Analog Channel Enable */
+ ad1843_DA1EN = { 27, 8, 1 }, /* DAC1 Enable */
+ ad1843_DA2EN = { 27, 9, 1 }, /* DAC2 Enable */
+ ad1843_DDMEN = { 27, 12, 1 }, /* DAC2 to DAC1 Mix Enable */
+ ad1843_C1EN = { 28, 11, 1 }, /* Clock Generator 1 Enable */
+ ad1843_C2EN = { 28, 12, 1 }, /* Clock Generator 2 Enable */
+ ad1843_C3EN = { 28, 13, 1 }, /* Clock Generator 3 Enable */
+ ad1843_PDNI = { 28, 15, 1 }; /* Converter Power Down */
+
+/*
+ * The various registers of the AD1843 use three different formats for
+ * specifying gain. The ad1843_gain structure parameterizes the
+ * formats.
+ */
+
+struct ad1843_gain {
+ int negative; /* nonzero if gain is negative. */
+ const struct ad1843_bitfield *lfield;
+ const struct ad1843_bitfield *rfield;
+ const struct ad1843_bitfield *lmute;
+ const struct ad1843_bitfield *rmute;
+};
+
+const struct ad1843_gain ad1843_gain_RECLEV = {
+ 0, &ad1843_LIG, &ad1843_RIG
+};
+const struct ad1843_gain ad1843_gain_LINE = {
+ 1, &ad1843_LX1M, &ad1843_RX1M, &ad1843_LX1MM, &ad1843_RX1MM
+};
+const struct ad1843_gain ad1843_gain_LINE_2 = {
+ 1, &ad1843_LDA2G, &ad1843_RDA2G, &ad1843_LDA2GM, &ad1843_RDA2GM
+};
+const struct ad1843_gain ad1843_gain_MIC = {
+ 1, &ad1843_LMCM, &ad1843_RMCM, &ad1843_LMCMM, &ad1843_RMCMM
+};
+const struct ad1843_gain ad1843_gain_PCM_0 = {
+ 1, &ad1843_LDA1G, &ad1843_RDA1G, &ad1843_LDA1GM, &ad1843_RDA1GM
+};
+const struct ad1843_gain ad1843_gain_PCM_1 = {
+ 1, &ad1843_LD2M, &ad1843_RD2M, &ad1843_LD2MM, &ad1843_RD2MM
+};
+
+const struct ad1843_gain *ad1843_gain[AD1843_GAIN_SIZE] =
+{
+ &ad1843_gain_RECLEV,
+ &ad1843_gain_LINE,
+ &ad1843_gain_LINE_2,
+ &ad1843_gain_MIC,
+ &ad1843_gain_PCM_0,
+ &ad1843_gain_PCM_1,
+};
+
+/* read the current value of an AD1843 bitfield. */
+
+static int ad1843_read_bits(struct snd_ad1843 *ad1843,
+ const struct ad1843_bitfield *field)
+{
+ int w;
+
+ w = ad1843->read(ad1843->chip, field->reg);
+ return w >> field->lo_bit & ((1 << field->nbits) - 1);
+}
+
+/*
+ * write a new value to an AD1843 bitfield and return the old value.
+ */
+
+static int ad1843_write_bits(struct snd_ad1843 *ad1843,
+ const struct ad1843_bitfield *field,
+ int newval)
+{
+ int w, mask, oldval, newbits;
+
+ w = ad1843->read(ad1843->chip, field->reg);
+ mask = ((1 << field->nbits) - 1) << field->lo_bit;
+ oldval = (w & mask) >> field->lo_bit;
+ newbits = (newval << field->lo_bit) & mask;
+ w = (w & ~mask) | newbits;
+ ad1843->write(ad1843->chip, field->reg, w);
+
+ return oldval;
+}
+
+/*
+ * ad1843_read_multi reads multiple bitfields from the same AD1843
+ * register. It uses a single read cycle to do it. (Reading the
+ * ad1843 requires 256 bit times at 12.288 MHz, or nearly 20
+ * microseconds.)
+ *
+ * Called like this.
+ *
+ * ad1843_read_multi(ad1843, nfields,
+ * &ad1843_FIELD1, &val1,
+ * &ad1843_FIELD2, &val2, ...);
+ */
+
+static void ad1843_read_multi(struct snd_ad1843 *ad1843, int argcount, ...)
+{
+ va_list ap;
+ const struct ad1843_bitfield *fp;
+ int w = 0, mask, *value, reg = -1;
+
+ va_start(ap, argcount);
+ while (--argcount >= 0) {
+ fp = va_arg(ap, const struct ad1843_bitfield *);
+ value = va_arg(ap, int *);
+ if (reg == -1) {
+ reg = fp->reg;
+ w = ad1843->read(ad1843->chip, reg);
+ }
+
+ mask = (1 << fp->nbits) - 1;
+ *value = w >> fp->lo_bit & mask;
+ }
+ va_end(ap);
+}
+
+/*
+ * ad1843_write_multi stores multiple bitfields into the same AD1843
+ * register. It uses one read and one write cycle to do it.
+ *
+ * Called like this.
+ *
+ * ad1843_write_multi(ad1843, nfields,
+ * &ad1843_FIELD1, val1,
+ * &ad1843_FIELF2, val2, ...);
+ */
+
+static void ad1843_write_multi(struct snd_ad1843 *ad1843, int argcount, ...)
+{
+ va_list ap;
+ int reg;
+ const struct ad1843_bitfield *fp;
+ int value;
+ int w, m, mask, bits;
+
+ mask = 0;
+ bits = 0;
+ reg = -1;
+
+ va_start(ap, argcount);
+ while (--argcount >= 0) {
+ fp = va_arg(ap, const struct ad1843_bitfield *);
+ value = va_arg(ap, int);
+ if (reg == -1)
+ reg = fp->reg;
+ else
+ BUG_ON(reg != fp->reg);
+ m = ((1 << fp->nbits) - 1) << fp->lo_bit;
+ mask |= m;
+ bits |= (value << fp->lo_bit) & m;
+ }
+ va_end(ap);
+
+ if (~mask & 0xFFFF)
+ w = ad1843->read(ad1843->chip, reg);
+ else
+ w = 0;
+ w = (w & ~mask) | bits;
+ ad1843->write(ad1843->chip, reg, w);
+}
+
+int ad1843_get_gain_max(struct snd_ad1843 *ad1843, int id)
+{
+ const struct ad1843_gain *gp = ad1843_gain[id];
+ int ret;
+
+ ret = (1 << gp->lfield->nbits);
+ if (!gp->lmute)
+ ret -= 1;
+ return ret;
+}
+
+/*
+ * ad1843_get_gain reads the specified register and extracts the gain value
+ * using the supplied gain type.
+ */
+
+int ad1843_get_gain(struct snd_ad1843 *ad1843, int id)
+{
+ int lg, rg, lm, rm;
+ const struct ad1843_gain *gp = ad1843_gain[id];
+ unsigned short mask = (1 << gp->lfield->nbits) - 1;
+
+ ad1843_read_multi(ad1843, 2, gp->lfield, &lg, gp->rfield, &rg);
+ if (gp->negative) {
+ lg = mask - lg;
+ rg = mask - rg;
+ }
+ if (gp->lmute) {
+ ad1843_read_multi(ad1843, 2, gp->lmute, &lm, gp->rmute, &rm);
+ if (lm)
+ lg = 0;
+ if (rm)
+ rg = 0;
+ }
+ return lg << 0 | rg << 8;
+}
+
+/*
+ * Set an audio channel's gain.
+ *
+ * Returns the new gain, which may be lower than the old gain.
+ */
+
+int ad1843_set_gain(struct snd_ad1843 *ad1843, int id, int newval)
+{
+ const struct ad1843_gain *gp = ad1843_gain[id];
+ unsigned short mask = (1 << gp->lfield->nbits) - 1;
+
+ int lg = (newval >> 0) & mask;
+ int rg = (newval >> 8) & mask;
+ int lm = (lg == 0) ? 1 : 0;
+ int rm = (rg == 0) ? 1 : 0;
+
+ if (gp->negative) {
+ lg = mask - lg;
+ rg = mask - rg;
+ }
+ if (gp->lmute)
+ ad1843_write_multi(ad1843, 2, gp->lmute, lm, gp->rmute, rm);
+ ad1843_write_multi(ad1843, 2, gp->lfield, lg, gp->rfield, rg);
+ return ad1843_get_gain(ad1843, id);
+}
+
+/* Returns the current recording source */
+
+int ad1843_get_recsrc(struct snd_ad1843 *ad1843)
+{
+ int val = ad1843_read_bits(ad1843, &ad1843_LSS);
+
+ if (val < 0 || val > 2) {
+ val = 2;
+ ad1843_write_multi(ad1843, 2,
+ &ad1843_LSS, val, &ad1843_RSS, val);
+ }
+ return val;
+}
+
+/*
+ * Set recording source.
+ *
+ * Returns newsrc on success, -errno on failure.
+ */
+
+int ad1843_set_recsrc(struct snd_ad1843 *ad1843, int newsrc)
+{
+ if (newsrc < 0 || newsrc > 2)
+ return -EINVAL;
+
+ ad1843_write_multi(ad1843, 2, &ad1843_LSS, newsrc, &ad1843_RSS, newsrc);
+ return newsrc;
+}
+
+/* Setup ad1843 for D/A conversion. */
+
+void ad1843_setup_dac(struct snd_ad1843 *ad1843,
+ unsigned int id,
+ unsigned int framerate,
+ snd_pcm_format_t fmt,
+ unsigned int channels)
+{
+ int ad_fmt = 0, ad_mode = 0;
+
+ switch (fmt) {
+ case SNDRV_PCM_FORMAT_S8:
+ ad_fmt = 0;
+ break;
+ case SNDRV_PCM_FORMAT_U8:
+ ad_fmt = 0;
+ break;
+ case SNDRV_PCM_FORMAT_S16_LE:
+ ad_fmt = 1;
+ break;
+ case SNDRV_PCM_FORMAT_MU_LAW:
+ ad_fmt = 2;
+ break;
+ case SNDRV_PCM_FORMAT_A_LAW:
+ ad_fmt = 3;
+ break;
+ default:
+ break;
+ }
+
+ switch (channels) {
+ case 2:
+ ad_mode = 0;
+ break;
+ case 1:
+ ad_mode = 1;
+ break;
+ default:
+ break;
+ }
+
+ if (id) {
+ ad1843_write_bits(ad1843, &ad1843_C2C, framerate);
+ ad1843_write_multi(ad1843, 2,
+ &ad1843_DA2SM, ad_mode,
+ &ad1843_DA2F, ad_fmt);
+ } else {
+ ad1843_write_bits(ad1843, &ad1843_C1C, framerate);
+ ad1843_write_multi(ad1843, 2,
+ &ad1843_DA1SM, ad_mode,
+ &ad1843_DA1F, ad_fmt);
+ }
+}
+
+void ad1843_shutdown_dac(struct snd_ad1843 *ad1843, unsigned int id)
+{
+ if (id)
+ ad1843_write_bits(ad1843, &ad1843_DA2F, 1);
+ else
+ ad1843_write_bits(ad1843, &ad1843_DA1F, 1);
+}
+
+void ad1843_setup_adc(struct snd_ad1843 *ad1843,
+ unsigned int framerate,
+ snd_pcm_format_t fmt,
+ unsigned int channels)
+{
+ int da_fmt = 0;
+
+ switch (fmt) {
+ case SNDRV_PCM_FORMAT_S8: da_fmt = 0; break;
+ case SNDRV_PCM_FORMAT_U8: da_fmt = 0; break;
+ case SNDRV_PCM_FORMAT_S16_LE: da_fmt = 1; break;
+ case SNDRV_PCM_FORMAT_MU_LAW: da_fmt = 2; break;
+ case SNDRV_PCM_FORMAT_A_LAW: da_fmt = 3; break;
+ default: break;
+ }
+
+ ad1843_write_bits(ad1843, &ad1843_C3C, framerate);
+ ad1843_write_multi(ad1843, 2,
+ &ad1843_ADLF, da_fmt, &ad1843_ADRF, da_fmt);
+}
+
+void ad1843_shutdown_adc(struct snd_ad1843 *ad1843)
+{
+ /* nothing to do */
+}
+
+/*
+ * Fully initialize the ad1843. As described in the AD1843 data
+ * sheet, section "START-UP SEQUENCE". The numbered comments are
+ * subsection headings from the data sheet. See the data sheet, pages
+ * 52-54, for more info.
+ *
+ * return 0 on success, -errno on failure. */
+
+int ad1843_init(struct snd_ad1843 *ad1843)
+{
+ unsigned long later;
+
+ if (ad1843_read_bits(ad1843, &ad1843_INIT) != 0) {
+ printk(KERN_ERR "ad1843: AD1843 won't initialize\n");
+ return -EIO;
+ }
+
+ ad1843_write_bits(ad1843, &ad1843_SCF, 1);
+
+ /* 4. Put the conversion resources into standby. */
+ ad1843_write_bits(ad1843, &ad1843_PDNI, 0);
+ later = jiffies + HZ / 2; /* roughly half a second */
+
+ while (ad1843_read_bits(ad1843, &ad1843_PDNO)) {
+ if (time_after(jiffies, later)) {
+ printk(KERN_ERR
+ "ad1843: AD1843 won't power up\n");
+ return -EIO;
+ }
+ schedule();
+ }
+
+ /* 5. Power up the clock generators and enable clock output pins. */
+ ad1843_write_multi(ad1843, 3,
+ &ad1843_C1EN, 1,
+ &ad1843_C2EN, 1,
+ &ad1843_C3EN, 1);
+
+ /* 6. Configure conversion resources while they are in standby. */
+
+ /* DAC1/2 use clock 1/2 as source, ADC uses clock 3. Always. */
+ ad1843_write_multi(ad1843, 4,
+ &ad1843_DA1C, 1,
+ &ad1843_DA2C, 2,
+ &ad1843_ADLC, 3,
+ &ad1843_ADRC, 3);
+
+ /* 7. Enable conversion resources. */
+ ad1843_write_bits(ad1843, &ad1843_ADTLK, 1);
+ ad1843_write_multi(ad1843, 7,
+ &ad1843_ANAEN, 1,
+ &ad1843_AAMEN, 1,
+ &ad1843_DA1EN, 1,
+ &ad1843_DA2EN, 1,
+ &ad1843_DDMEN, 1,
+ &ad1843_ADLEN, 1,
+ &ad1843_ADREN, 1);
+
+ /* 8. Configure conversion resources while they are enabled. */
+
+ /* set gain to 0 for all channels */
+ ad1843_set_gain(ad1843, AD1843_GAIN_RECLEV, 0);
+ ad1843_set_gain(ad1843, AD1843_GAIN_LINE, 0);
+ ad1843_set_gain(ad1843, AD1843_GAIN_LINE_2, 0);
+ ad1843_set_gain(ad1843, AD1843_GAIN_MIC, 0);
+ ad1843_set_gain(ad1843, AD1843_GAIN_PCM_0, 0);
+ ad1843_set_gain(ad1843, AD1843_GAIN_PCM_1, 0);
+
+ /* Unmute all channels. */
+ /* DAC1 */
+ ad1843_write_multi(ad1843, 2, &ad1843_LDA1GM, 0, &ad1843_RDA1GM, 0);
+ /* DAC2 */
+ ad1843_write_multi(ad1843, 2, &ad1843_LDA2GM, 0, &ad1843_RDA2GM, 0);
+
+ /* Set default recording source to Line In and set
+ * mic gain to +20 dB.
+ */
+ ad1843_set_recsrc(ad1843, 2);
+ ad1843_write_multi(ad1843, 2, &ad1843_LMGE, 1, &ad1843_RMGE, 1);
+
+ /* Set Speaker Out level to +/- 4V and unmute it. */
+ ad1843_write_multi(ad1843, 3,
+ &ad1843_HPOS, 1,
+ &ad1843_HPOM, 0,
+ &ad1843_MPOM, 0);
+
+ return 0;
+}
diff --git a/sound/mips/sgio2audio.c b/sound/mips/sgio2audio.c
new file mode 100644
index 0000000..6630af3
--- /dev/null
+++ b/sound/mips/sgio2audio.c
@@ -0,0 +1,1013 @@
+/*
+ * Sound driver for Silicon Graphics O2 Workstations A/V board audio.
+ *
+ * Copyright 2003 Vivien Chappelier <vivien.chappelier@linux-mips.org>
+ * Copyright 2008 Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+ * Mxier part taken from mace_audio.c:
+ * Copyright 2007 Thorben Jändling <tj.trevelyan@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/gfp.h>
+#include <linux/vmalloc.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <asm/ip32/ip32_ints.h>
+#include <asm/ip32/mace.h>
+
+#include <sound/core.h>
+#include <sound/control.h>
+#include <sound/pcm.h>
+#define SNDRV_GET_ID
+#include <sound/initval.h>
+#include <sound/ad1843.h>
+
+
+MODULE_AUTHOR("Vivien Chappelier <vivien.chappelier@linux-mips.org>");
+MODULE_DESCRIPTION("SGI O2 Audio");
+MODULE_LICENSE("GPL");
+MODULE_SUPPORTED_DEVICE("{{Silicon Graphics, O2 Audio}}");
+
+static int index = SNDRV_DEFAULT_IDX1; /* Index 0-MAX */
+static char *id = SNDRV_DEFAULT_STR1; /* ID for this card */
+
+module_param(index, int, 0444);
+MODULE_PARM_DESC(index, "Index value for SGI O2 soundcard.");
+module_param(id, charp, 0444);
+MODULE_PARM_DESC(id, "ID string for SGI O2 soundcard.");
+
+
+#define SGIO2AUDIO_MAX_VOLUME 31
+
+#define AUDIO_CONTROL_RESET BIT(0) /* 1: reset audio interface */
+#define AUDIO_CONTROL_CODEC_PRESENT BIT(1) /* 1: codec detected */
+
+#define CODEC_CONTROL_WORD_SHIFT 0
+#define CODEC_CONTROL_READ BIT(16)
+#define CODEC_CONTROL_ADDRESS_SHIFT 17
+
+#define CHANNEL_CONTROL_RESET BIT(10) /* 1: reset channel */
+#define CHANNEL_DMA_ENABLE BIT(9) /* 1: enable DMA transfer */
+#define CHANNEL_INT_THRESHOLD_DISABLED (0 << 5) /* interrupt disabled */
+#define CHANNEL_INT_THRESHOLD_25 (1 << 5) /* int on buffer >25% full */
+#define CHANNEL_INT_THRESHOLD_50 (2 << 5) /* int on buffer >50% full */
+#define CHANNEL_INT_THRESHOLD_75 (3 << 5) /* int on buffer >75% full */
+#define CHANNEL_INT_THRESHOLD_EMPTY (4 << 5) /* int on buffer empty */
+#define CHANNEL_INT_THRESHOLD_NOT_EMPTY (5 << 5) /* int on buffer !empty */
+#define CHANNEL_INT_THRESHOLD_FULL (6 << 5) /* int on buffer empty */
+#define CHANNEL_INT_THRESHOLD_NOT_FULL (7 << 5) /* int on buffer !empty */
+
+#define CHANNEL_RING_SHIFT 12
+#define CHANNEL_RING_SIZE (1 << CHANNEL_RING_SHIFT)
+#define CHANNEL_RING_MASK (CHANNEL_RING_SIZE - 1)
+
+#define CHANNEL_LEFT_SHIFT 40
+#define CHANNEL_RIGHT_SHIFT 8
+
+struct snd_sgio2audio_chan {
+ int idx;
+ struct snd_pcm_substream *substream;
+ int pos;
+ snd_pcm_uframes_t size;
+ spinlock_t lock;
+};
+
+/* definition of the chip-specific record */
+struct snd_sgio2audio {
+ struct snd_card *card;
+
+ /* codec */
+ struct snd_ad1843 ad1843;
+ spinlock_t ad1843_lock;
+
+ /* channels */
+ struct snd_sgio2audio_chan channel[3];
+
+ /* properties */
+ int volume;
+
+ /* resources */
+ void *ring_base;
+ dma_addr_t ring_base_dma;
+};
+
+/* AD1843 access */
+
+/*
+ * read_ad1843_reg returns the current contents of a 16 bit AD1843 register.
+ *
+ * Returns unsigned register value on success, -errno on failure.
+ */
+static int read_ad1843_reg(void *priv, int reg)
+{
+ struct snd_sgio2audio *chip = priv;
+ int val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&chip->ad1843_lock, flags);
+
+ writeq((reg << CODEC_CONTROL_ADDRESS_SHIFT) |
+ CODEC_CONTROL_READ, &mace->perif.audio.codec_control);
+ wmb();
+ val = readq(&mace->perif.audio.codec_control); /* flush bus */
+ udelay(200);
+
+ val = readq(&mace->perif.audio.codec_read);
+
+ spin_unlock_irqrestore(&chip->ad1843_lock, flags);
+ return val;
+}
+
+/*
+ * write_ad1843_reg writes the specified value to a 16 bit AD1843 register.
+ */
+static int write_ad1843_reg(void *priv, int reg, int word)
+{
+ struct snd_sgio2audio *chip = priv;
+ int val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&chip->ad1843_lock, flags);
+
+ writeq((reg << CODEC_CONTROL_ADDRESS_SHIFT) |
+ (word << CODEC_CONTROL_WORD_SHIFT),
+ &mace->perif.audio.codec_control);
+ wmb();
+ val = readq(&mace->perif.audio.codec_control); /* flush bus */
+ udelay(200);
+
+ spin_unlock_irqrestore(&chip->ad1843_lock, flags);
+ return 0;
+}
+
+static int sgio2audio_gain_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ struct snd_sgio2audio *chip = snd_kcontrol_chip(kcontrol);
+
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 2;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = ad1843_get_gain_max(&chip->ad1843,
+ (int)kcontrol->private_value);
+ return 0;
+}
+
+static int sgio2audio_gain_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_sgio2audio *chip = snd_kcontrol_chip(kcontrol);
+ int vol;
+
+ vol = ad1843_get_gain(&chip->ad1843, (int)kcontrol->private_value);
+
+ ucontrol->value.integer.value[0] = (vol >> 8) & 0xFF;
+ ucontrol->value.integer.value[1] = vol & 0xFF;
+
+ return 0;
+}
+
+static int sgio2audio_gain_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_sgio2audio *chip = snd_kcontrol_chip(kcontrol);
+ int newvol, oldvol;
+
+ oldvol = ad1843_get_gain(&chip->ad1843, kcontrol->private_value);
+ newvol = (ucontrol->value.integer.value[0] << 8) |
+ ucontrol->value.integer.value[1];
+
+ newvol = ad1843_set_gain(&chip->ad1843, kcontrol->private_value,
+ newvol);
+
+ return newvol != oldvol;
+}
+
+static int sgio2audio_source_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ static const char *texts[3] = {
+ "Cam Mic", "Mic", "Line"
+ };
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+ uinfo->count = 1;
+ uinfo->value.enumerated.items = 3;
+ if (uinfo->value.enumerated.item >= 3)
+ uinfo->value.enumerated.item = 1;
+ strcpy(uinfo->value.enumerated.name,
+ texts[uinfo->value.enumerated.item]);
+ return 0;
+}
+
+static int sgio2audio_source_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_sgio2audio *chip = snd_kcontrol_chip(kcontrol);
+
+ ucontrol->value.enumerated.item[0] = ad1843_get_recsrc(&chip->ad1843);
+ return 0;
+}
+
+static int sgio2audio_source_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_sgio2audio *chip = snd_kcontrol_chip(kcontrol);
+ int newsrc, oldsrc;
+
+ oldsrc = ad1843_get_recsrc(&chip->ad1843);
+ newsrc = ad1843_set_recsrc(&chip->ad1843,
+ ucontrol->value.enumerated.item[0]);
+
+ return newsrc != oldsrc;
+}
+
+/* dac1/pcm0 mixer control */
+static struct snd_kcontrol_new sgio2audio_ctrl_pcm0 __devinitdata = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "PCM Playback Volume",
+ .index = 0,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .private_value = AD1843_GAIN_PCM_0,
+ .info = sgio2audio_gain_info,
+ .get = sgio2audio_gain_get,
+ .put = sgio2audio_gain_put,
+};
+
+/* dac2/pcm1 mixer control */
+static struct snd_kcontrol_new sgio2audio_ctrl_pcm1 __devinitdata = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "PCM Playback Volume",
+ .index = 1,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .private_value = AD1843_GAIN_PCM_1,
+ .info = sgio2audio_gain_info,
+ .get = sgio2audio_gain_get,
+ .put = sgio2audio_gain_put,
+};
+
+/* record level mixer control */
+static struct snd_kcontrol_new sgio2audio_ctrl_reclevel __devinitdata = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Capture Volume",
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .private_value = AD1843_GAIN_RECLEV,
+ .info = sgio2audio_gain_info,
+ .get = sgio2audio_gain_get,
+ .put = sgio2audio_gain_put,
+};
+
+/* record level source control */
+static struct snd_kcontrol_new sgio2audio_ctrl_recsource __devinitdata = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Capture Source",
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .info = sgio2audio_source_info,
+ .get = sgio2audio_source_get,
+ .put = sgio2audio_source_put,
+};
+
+/* line mixer control */
+static struct snd_kcontrol_new sgio2audio_ctrl_line __devinitdata = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Line Playback Volume",
+ .index = 0,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .private_value = AD1843_GAIN_LINE,
+ .info = sgio2audio_gain_info,
+ .get = sgio2audio_gain_get,
+ .put = sgio2audio_gain_put,
+};
+
+/* cd mixer control */
+static struct snd_kcontrol_new sgio2audio_ctrl_cd __devinitdata = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Line Playback Volume",
+ .index = 1,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .private_value = AD1843_GAIN_LINE_2,
+ .info = sgio2audio_gain_info,
+ .get = sgio2audio_gain_get,
+ .put = sgio2audio_gain_put,
+};
+
+/* mic mixer control */
+static struct snd_kcontrol_new sgio2audio_ctrl_mic __devinitdata = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Mic Playback Volume",
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .private_value = AD1843_GAIN_MIC,
+ .info = sgio2audio_gain_info,
+ .get = sgio2audio_gain_get,
+ .put = sgio2audio_gain_put,
+};
+
+
+static int __devinit snd_sgio2audio_new_mixer(struct snd_sgio2audio *chip)
+{
+ int err;
+
+ err = snd_ctl_add(chip->card,
+ snd_ctl_new1(&sgio2audio_ctrl_pcm0, chip));
+ if (err < 0)
+ return err;
+
+ err = snd_ctl_add(chip->card,
+ snd_ctl_new1(&sgio2audio_ctrl_pcm1, chip));
+ if (err < 0)
+ return err;
+
+ err = snd_ctl_add(chip->card,
+ snd_ctl_new1(&sgio2audio_ctrl_reclevel, chip));
+ if (err < 0)
+ return err;
+
+ err = snd_ctl_add(chip->card,
+ snd_ctl_new1(&sgio2audio_ctrl_recsource, chip));
+ if (err < 0)
+ return err;
+ err = snd_ctl_add(chip->card,
+ snd_ctl_new1(&sgio2audio_ctrl_line, chip));
+ if (err < 0)
+ return err;
+
+ err = snd_ctl_add(chip->card,
+ snd_ctl_new1(&sgio2audio_ctrl_cd, chip));
+ if (err < 0)
+ return err;
+
+ err = snd_ctl_add(chip->card,
+ snd_ctl_new1(&sgio2audio_ctrl_mic, chip));
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+/* low-level audio interface DMA */
+
+/* get data out of bounce buffer, count must be a multiple of 32 */
+/* returns 1 if a period has elapsed */
+static int snd_sgio2audio_dma_pull_frag(struct snd_sgio2audio *chip,
+ unsigned int ch, unsigned int count)
+{
+ int ret;
+ unsigned long src_base, src_pos, dst_mask;
+ unsigned char *dst_base;
+ int dst_pos;
+ u64 *src;
+ s16 *dst;
+ u64 x;
+ unsigned long flags;
+ struct snd_pcm_runtime *runtime = chip->channel[ch].substream->runtime;
+
+ spin_lock_irqsave(&chip->channel[ch].lock, flags);
+
+ src_base = (unsigned long) chip->ring_base | (ch << CHANNEL_RING_SHIFT);
+ src_pos = readq(&mace->perif.audio.chan[ch].read_ptr);
+ dst_base = runtime->dma_area;
+ dst_pos = chip->channel[ch].pos;
+ dst_mask = frames_to_bytes(runtime, runtime->buffer_size) - 1;
+
+ /* check if a period has elapsed */
+ chip->channel[ch].size += (count >> 3); /* in frames */
+ ret = chip->channel[ch].size >= runtime->period_size;
+ chip->channel[ch].size %= runtime->period_size;
+
+ while (count) {
+ src = (u64 *)(src_base + src_pos);
+ dst = (s16 *)(dst_base + dst_pos);
+
+ x = *src;
+ dst[0] = (x >> CHANNEL_LEFT_SHIFT) & 0xffff;
+ dst[1] = (x >> CHANNEL_RIGHT_SHIFT) & 0xffff;
+
+ src_pos = (src_pos + sizeof(u64)) & CHANNEL_RING_MASK;
+ dst_pos = (dst_pos + 2 * sizeof(s16)) & dst_mask;
+ count -= sizeof(u64);
+ }
+
+ writeq(src_pos, &mace->perif.audio.chan[ch].read_ptr); /* in bytes */
+ chip->channel[ch].pos = dst_pos;
+
+ spin_unlock_irqrestore(&chip->channel[ch].lock, flags);
+ return ret;
+}
+
+/* put some DMA data in bounce buffer, count must be a multiple of 32 */
+/* returns 1 if a period has elapsed */
+static int snd_sgio2audio_dma_push_frag(struct snd_sgio2audio *chip,
+ unsigned int ch, unsigned int count)
+{
+ int ret;
+ s64 l, r;
+ unsigned long dst_base, dst_pos, src_mask;
+ unsigned char *src_base;
+ int src_pos;
+ u64 *dst;
+ s16 *src;
+ unsigned long flags;
+ struct snd_pcm_runtime *runtime = chip->channel[ch].substream->runtime;
+
+ spin_lock_irqsave(&chip->channel[ch].lock, flags);
+
+ dst_base = (unsigned long)chip->ring_base | (ch << CHANNEL_RING_SHIFT);
+ dst_pos = readq(&mace->perif.audio.chan[ch].write_ptr);
+ src_base = runtime->dma_area;
+ src_pos = chip->channel[ch].pos;
+ src_mask = frames_to_bytes(runtime, runtime->buffer_size) - 1;
+
+ /* check if a period has elapsed */
+ chip->channel[ch].size += (count >> 3); /* in frames */
+ ret = chip->channel[ch].size >= runtime->period_size;
+ chip->channel[ch].size %= runtime->period_size;
+
+ while (count) {
+ src = (s16 *)(src_base + src_pos);
+ dst = (u64 *)(dst_base + dst_pos);
+
+ l = src[0]; /* sign extend */
+ r = src[1]; /* sign extend */
+
+ *dst = ((l & 0x00ffffff) << CHANNEL_LEFT_SHIFT) |
+ ((r & 0x00ffffff) << CHANNEL_RIGHT_SHIFT);
+
+ dst_pos = (dst_pos + sizeof(u64)) & CHANNEL_RING_MASK;
+ src_pos = (src_pos + 2 * sizeof(s16)) & src_mask;
+ count -= sizeof(u64);
+ }
+
+ writeq(dst_pos, &mace->perif.audio.chan[ch].write_ptr); /* in bytes */
+ chip->channel[ch].pos = src_pos;
+
+ spin_unlock_irqrestore(&chip->channel[ch].lock, flags);
+ return ret;
+}
+
+static int snd_sgio2audio_dma_start(struct snd_pcm_substream *substream)
+{
+ struct snd_sgio2audio *chip = snd_pcm_substream_chip(substream);
+ struct snd_sgio2audio_chan *chan = substream->runtime->private_data;
+ int ch = chan->idx;
+
+ /* reset DMA channel */
+ writeq(CHANNEL_CONTROL_RESET, &mace->perif.audio.chan[ch].control);
+ udelay(10);
+ writeq(0, &mace->perif.audio.chan[ch].control);
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ /* push a full buffer */
+ snd_sgio2audio_dma_push_frag(chip, ch, CHANNEL_RING_SIZE - 32);
+ }
+ /* set DMA to wake on 50% empty and enable interrupt */
+ writeq(CHANNEL_DMA_ENABLE | CHANNEL_INT_THRESHOLD_50,
+ &mace->perif.audio.chan[ch].control);
+ return 0;
+}
+
+static int snd_sgio2audio_dma_stop(struct snd_pcm_substream *substream)
+{
+ struct snd_sgio2audio_chan *chan = substream->runtime->private_data;
+
+ writeq(0, &mace->perif.audio.chan[chan->idx].control);
+ return 0;
+}
+
+static irqreturn_t snd_sgio2audio_dma_in_isr(int irq, void *dev_id)
+{
+ struct snd_sgio2audio_chan *chan = dev_id;
+ struct snd_pcm_substream *substream;
+ struct snd_sgio2audio *chip;
+ int count, ch;
+
+ substream = chan->substream;
+ chip = snd_pcm_substream_chip(substream);
+ ch = chan->idx;
+
+ /* empty the ring */
+ count = CHANNEL_RING_SIZE -
+ readq(&mace->perif.audio.chan[ch].depth) - 32;
+ if (snd_sgio2audio_dma_pull_frag(chip, ch, count))
+ snd_pcm_period_elapsed(substream);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t snd_sgio2audio_dma_out_isr(int irq, void *dev_id)
+{
+ struct snd_sgio2audio_chan *chan = dev_id;
+ struct snd_pcm_substream *substream;
+ struct snd_sgio2audio *chip;
+ int count, ch;
+
+ substream = chan->substream;
+ chip = snd_pcm_substream_chip(substream);
+ ch = chan->idx;
+ /* fill the ring */
+ count = CHANNEL_RING_SIZE -
+ readq(&mace->perif.audio.chan[ch].depth) - 32;
+ if (snd_sgio2audio_dma_push_frag(chip, ch, count))
+ snd_pcm_period_elapsed(substream);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t snd_sgio2audio_error_isr(int irq, void *dev_id)
+{
+ struct snd_sgio2audio_chan *chan = dev_id;
+ struct snd_pcm_substream *substream;
+
+ substream = chan->substream;
+ snd_sgio2audio_dma_stop(substream);
+ snd_sgio2audio_dma_start(substream);
+ return IRQ_HANDLED;
+}
+
+/* PCM part */
+/* PCM hardware definition */
+static struct snd_pcm_hardware snd_sgio2audio_pcm_hw = {
+ .info = (SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER),
+ .formats = SNDRV_PCM_FMTBIT_S16_BE,
+ .rates = SNDRV_PCM_RATE_8000_48000,
+ .rate_min = 8000,
+ .rate_max = 48000,
+ .channels_min = 2,
+ .channels_max = 2,
+ .buffer_bytes_max = 65536,
+ .period_bytes_min = 32768,
+ .period_bytes_max = 65536,
+ .periods_min = 1,
+ .periods_max = 1024,
+};
+
+/* PCM playback open callback */
+static int snd_sgio2audio_playback1_open(struct snd_pcm_substream *substream)
+{
+ struct snd_sgio2audio *chip = snd_pcm_substream_chip(substream);
+ struct snd_pcm_runtime *runtime = substream->runtime;
+
+ runtime->hw = snd_sgio2audio_pcm_hw;
+ runtime->private_data = &chip->channel[1];
+ return 0;
+}
+
+static int snd_sgio2audio_playback2_open(struct snd_pcm_substream *substream)
+{
+ struct snd_sgio2audio *chip = snd_pcm_substream_chip(substream);
+ struct snd_pcm_runtime *runtime = substream->runtime;
+
+ runtime->hw = snd_sgio2audio_pcm_hw;
+ runtime->private_data = &chip->channel[2];
+ return 0;
+}
+
+/* PCM capture open callback */
+static int snd_sgio2audio_capture_open(struct snd_pcm_substream *substream)
+{
+ struct snd_sgio2audio *chip = snd_pcm_substream_chip(substream);
+ struct snd_pcm_runtime *runtime = substream->runtime;
+
+ runtime->hw = snd_sgio2audio_pcm_hw;
+ runtime->private_data = &chip->channel[0];
+ return 0;
+}
+
+/* PCM close callback */
+static int snd_sgio2audio_pcm_close(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+
+ runtime->private_data = NULL;
+ return 0;
+}
+
+
+/* hw_params callback */
+static int snd_sgio2audio_pcm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *hw_params)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ int size = params_buffer_bytes(hw_params);
+
+ /* alloc virtual 'dma' area */
+ if (runtime->dma_area)
+ vfree(runtime->dma_area);
+ runtime->dma_area = vmalloc(size);
+ if (runtime->dma_area == NULL)
+ return -ENOMEM;
+ runtime->dma_bytes = size;
+ return 0;
+}
+
+/* hw_free callback */
+static int snd_sgio2audio_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+ if (substream->runtime->dma_area)
+ vfree(substream->runtime->dma_area);
+ substream->runtime->dma_area = NULL;
+ return 0;
+}
+
+/* prepare callback */
+static int snd_sgio2audio_pcm_prepare(struct snd_pcm_substream *substream)
+{
+ struct snd_sgio2audio *chip = snd_pcm_substream_chip(substream);
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct snd_sgio2audio_chan *chan = substream->runtime->private_data;
+ int ch = chan->idx;
+ unsigned long flags;
+
+ spin_lock_irqsave(&chip->channel[ch].lock, flags);
+
+ /* Setup the pseudo-dma transfer pointers. */
+ chip->channel[ch].pos = 0;
+ chip->channel[ch].size = 0;
+ chip->channel[ch].substream = substream;
+
+ /* set AD1843 format */
+ /* hardware format is always S16_LE */
+ switch (substream->stream) {
+ case SNDRV_PCM_STREAM_PLAYBACK:
+ ad1843_setup_dac(&chip->ad1843,
+ ch - 1,
+ runtime->rate,
+ SNDRV_PCM_FORMAT_S16_LE,
+ runtime->channels);
+ break;
+ case SNDRV_PCM_STREAM_CAPTURE:
+ ad1843_setup_adc(&chip->ad1843,
+ runtime->rate,
+ SNDRV_PCM_FORMAT_S16_LE,
+ runtime->channels);
+ break;
+ }
+ spin_unlock_irqrestore(&chip->channel[ch].lock, flags);
+ return 0;
+}
+
+/* trigger callback */
+static int snd_sgio2audio_pcm_trigger(struct snd_pcm_substream *substream,
+ int cmd)
+{
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ /* start the PCM engine */
+ snd_sgio2audio_dma_start(substream);
+ break;
+ case SNDRV_PCM_TRIGGER_STOP:
+ /* stop the PCM engine */
+ snd_sgio2audio_dma_stop(substream);
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/* pointer callback */
+static snd_pcm_uframes_t
+snd_sgio2audio_pcm_pointer(struct snd_pcm_substream *substream)
+{
+ struct snd_sgio2audio *chip = snd_pcm_substream_chip(substream);
+ struct snd_sgio2audio_chan *chan = substream->runtime->private_data;
+
+ /* get the current hardware pointer */
+ return bytes_to_frames(substream->runtime,
+ chip->channel[chan->idx].pos);
+}
+
+/* get the physical page pointer on the given offset */
+static struct page *snd_sgio2audio_page(struct snd_pcm_substream *substream,
+ unsigned long offset)
+{
+ return vmalloc_to_page(substream->runtime->dma_area + offset);
+}
+
+/* operators */
+static struct snd_pcm_ops snd_sgio2audio_playback1_ops = {
+ .open = snd_sgio2audio_playback1_open,
+ .close = snd_sgio2audio_pcm_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = snd_sgio2audio_pcm_hw_params,
+ .hw_free = snd_sgio2audio_pcm_hw_free,
+ .prepare = snd_sgio2audio_pcm_prepare,
+ .trigger = snd_sgio2audio_pcm_trigger,
+ .pointer = snd_sgio2audio_pcm_pointer,
+ .page = snd_sgio2audio_page,
+};
+
+static struct snd_pcm_ops snd_sgio2audio_playback2_ops = {
+ .open = snd_sgio2audio_playback2_open,
+ .close = snd_sgio2audio_pcm_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = snd_sgio2audio_pcm_hw_params,
+ .hw_free = snd_sgio2audio_pcm_hw_free,
+ .prepare = snd_sgio2audio_pcm_prepare,
+ .trigger = snd_sgio2audio_pcm_trigger,
+ .pointer = snd_sgio2audio_pcm_pointer,
+ .page = snd_sgio2audio_page,
+};
+
+static struct snd_pcm_ops snd_sgio2audio_capture_ops = {
+ .open = snd_sgio2audio_capture_open,
+ .close = snd_sgio2audio_pcm_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = snd_sgio2audio_pcm_hw_params,
+ .hw_free = snd_sgio2audio_pcm_hw_free,
+ .prepare = snd_sgio2audio_pcm_prepare,
+ .trigger = snd_sgio2audio_pcm_trigger,
+ .pointer = snd_sgio2audio_pcm_pointer,
+ .page = snd_sgio2audio_page,
+};
+
+/*
+ * definitions of capture are omitted here...
+ */
+
+/* create a pcm device */
+static int __devinit snd_sgio2audio_new_pcm(struct snd_sgio2audio *chip)
+{
+ struct snd_pcm *pcm;
+ int err;
+
+ /* create first pcm device with one outputs and one input */
+ err = snd_pcm_new(chip->card, "SGI O2 Audio", 0, 1, 1, &pcm);
+ if (err < 0)
+ return err;
+
+ pcm->private_data = chip;
+ strcpy(pcm->name, "SGI O2 DAC1");
+
+ /* set operators */
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
+ &snd_sgio2audio_playback1_ops);
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE,
+ &snd_sgio2audio_capture_ops);
+
+ /* create second pcm device with one outputs and no input */
+ err = snd_pcm_new(chip->card, "SGI O2 Audio", 1, 1, 0, &pcm);
+ if (err < 0)
+ return err;
+
+ pcm->private_data = chip;
+ strcpy(pcm->name, "SGI O2 DAC2");
+
+ /* set operators */
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
+ &snd_sgio2audio_playback2_ops);
+
+ return 0;
+}
+
+static struct {
+ int idx;
+ int irq;
+ irqreturn_t (*isr)(int, void *);
+ const char *desc;
+} snd_sgio2_isr_table[] = {
+ {
+ .idx = 0,
+ .irq = MACEISA_AUDIO1_DMAT_IRQ,
+ .isr = snd_sgio2audio_dma_in_isr,
+ .desc = "Capture DMA Channel 0"
+ }, {
+ .idx = 0,
+ .irq = MACEISA_AUDIO1_OF_IRQ,
+ .isr = snd_sgio2audio_error_isr,
+ .desc = "Capture Overflow"
+ }, {
+ .idx = 1,
+ .irq = MACEISA_AUDIO2_DMAT_IRQ,
+ .isr = snd_sgio2audio_dma_out_isr,
+ .desc = "Playback DMA Channel 1"
+ }, {
+ .idx = 1,
+ .irq = MACEISA_AUDIO2_MERR_IRQ,
+ .isr = snd_sgio2audio_error_isr,
+ .desc = "Memory Error Channel 1"
+ }, {
+ .idx = 2,
+ .irq = MACEISA_AUDIO3_DMAT_IRQ,
+ .isr = snd_sgio2audio_dma_out_isr,
+ .desc = "Playback DMA Channel 2"
+ }, {
+ .idx = 2,
+ .irq = MACEISA_AUDIO3_MERR_IRQ,
+ .isr = snd_sgio2audio_error_isr,
+ .desc = "Memory Error Channel 2"
+ }
+};
+
+/* ALSA driver */
+
+static int snd_sgio2audio_free(struct snd_sgio2audio *chip)
+{
+ int i;
+
+ /* reset interface */
+ writeq(AUDIO_CONTROL_RESET, &mace->perif.audio.control);
+ udelay(1);
+ writeq(0, &mace->perif.audio.control);
+
+ /* release IRQ's */
+ for (i = 0; i < ARRAY_SIZE(snd_sgio2_isr_table); i++)
+ free_irq(snd_sgio2_isr_table[i].irq,
+ &chip->channel[snd_sgio2_isr_table[i].idx]);
+
+ dma_free_coherent(NULL, MACEISA_RINGBUFFERS_SIZE,
+ chip->ring_base, chip->ring_base_dma);
+
+ /* release card data */
+ kfree(chip);
+ return 0;
+}
+
+static int snd_sgio2audio_dev_free(struct snd_device *device)
+{
+ struct snd_sgio2audio *chip = device->device_data;
+
+ return snd_sgio2audio_free(chip);
+}
+
+static struct snd_device_ops ops = {
+ .dev_free = snd_sgio2audio_dev_free,
+};
+
+static int __devinit snd_sgio2audio_create(struct snd_card *card,
+ struct snd_sgio2audio **rchip)
+{
+ struct snd_sgio2audio *chip;
+ int i, err;
+
+ *rchip = NULL;
+
+ /* check if a codec is attached to the interface */
+ /* (Audio or Audio/Video board present) */
+ if (!(readq(&mace->perif.audio.control) & AUDIO_CONTROL_CODEC_PRESENT))
+ return -ENOENT;
+
+ chip = kzalloc(sizeof(struct snd_sgio2audio), GFP_KERNEL);
+ if (chip == NULL)
+ return -ENOMEM;
+
+ chip->card = card;
+
+ chip->ring_base = dma_alloc_coherent(NULL, MACEISA_RINGBUFFERS_SIZE,
+ &chip->ring_base_dma, GFP_USER);
+ if (chip->ring_base == NULL) {
+ printk(KERN_ERR
+ "sgio2audio: could not allocate ring buffers\n");
+ kfree(chip);
+ return -ENOMEM;
+ }
+
+ spin_lock_init(&chip->ad1843_lock);
+
+ chip->volume = SGIO2AUDIO_MAX_VOLUME;
+
+ /* initialize channels */
+ for (i = 0; i < 3; i++) {
+ spin_lock_init(&chip->channel[i].lock);
+ chip->channel[i].idx = i;
+ }
+
+ /* allocate IRQs */
+ for (i = 0; i < ARRAY_SIZE(snd_sgio2_isr_table); i++) {
+ if (request_irq(snd_sgio2_isr_table[i].irq,
+ snd_sgio2_isr_table[i].isr,
+ IRQF_SHARED,
+ snd_sgio2_isr_table[i].desc,
+ &chip->channel[snd_sgio2_isr_table[i].idx])) {
+ snd_sgio2audio_free(chip);
+ printk(KERN_ERR "sgio2audio: cannot allocate irq %d\n",
+ snd_sgio2_isr_table[i].irq);
+ return -EBUSY;
+ }
+ }
+
+ /* reset the interface */
+ writeq(AUDIO_CONTROL_RESET, &mace->perif.audio.control);
+ udelay(1);
+ writeq(0, &mace->perif.audio.control);
+ udelay(100); /* give time to recover */
+
+ /* set ring base */
+ writeq(chip->ring_base_dma, &mace->perif.ctrl.ringbase);
+
+ /* attach the AD1843 codec */
+ chip->ad1843.read = read_ad1843_reg;
+ chip->ad1843.write = write_ad1843_reg;
+ chip->ad1843.chip = chip;
+
+ /* initialize the AD1843 codec */
+ err = ad1843_init(&chip->ad1843);
+ if (err < 0) {
+ snd_sgio2audio_free(chip);
+ return err;
+ }
+
+ err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
+ if (err < 0) {
+ snd_sgio2audio_free(chip);
+ return err;
+ }
+ *rchip = chip;
+ return 0;
+}
+
+static int __devinit snd_sgio2audio_probe(struct platform_device *pdev)
+{
+ struct snd_card *card;
+ struct snd_sgio2audio *chip;
+ int err;
+
+ card = snd_card_new(index, id, THIS_MODULE, 0);
+ if (card == NULL)
+ return -ENOMEM;
+
+ err = snd_sgio2audio_create(card, &chip);
+ if (err < 0) {
+ snd_card_free(card);
+ return err;
+ }
+ snd_card_set_dev(card, &pdev->dev);
+
+ err = snd_sgio2audio_new_pcm(chip);
+ if (err < 0) {
+ snd_card_free(card);
+ return err;
+ }
+ err = snd_sgio2audio_new_mixer(chip);
+ if (err < 0) {
+ snd_card_free(card);
+ return err;
+ }
+
+ strcpy(card->driver, "SGI O2 Audio");
+ strcpy(card->shortname, "SGI O2 Audio");
+ sprintf(card->longname, "%s irq %i-%i",
+ card->shortname,
+ MACEISA_AUDIO1_DMAT_IRQ,
+ MACEISA_AUDIO3_MERR_IRQ);
+
+ err = snd_card_register(card);
+ if (err < 0) {
+ snd_card_free(card);
+ return err;
+ }
+ platform_set_drvdata(pdev, card);
+ return 0;
+}
+
+static int __exit snd_sgio2audio_remove(struct platform_device *pdev)
+{
+ struct snd_card *card = platform_get_drvdata(pdev);
+
+ snd_card_free(card);
+ platform_set_drvdata(pdev, NULL);
+ return 0;
+}
+
+static struct platform_driver sgio2audio_driver = {
+ .probe = snd_sgio2audio_probe,
+ .remove = __devexit_p(snd_sgio2audio_remove),
+ .driver = {
+ .name = "sgio2audio",
+ .owner = THIS_MODULE,
+ }
+};
+
+static int __init alsa_card_sgio2audio_init(void)
+{
+ return platform_driver_register(&sgio2audio_driver);
+}
+
+static void __exit alsa_card_sgio2audio_exit(void)
+{
+ platform_driver_unregister(&sgio2audio_driver);
+}
+
+module_init(alsa_card_sgio2audio_init)
+module_exit(alsa_card_sgio2audio_exit)
--
Crap can work. Given enough thrust pigs will fly, but it's not necessary a
good idea. [ RFC1925, 2.3 ]
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: SGI O2 sound driver v6
2008-07-04 22:51 ` SGI O2 sound driver v6 Thomas Bogendoerfer
@ 2008-07-05 7:04 ` Martin Michlmayr
2008-07-05 8:04 ` Thomas Bogendoerfer
0 siblings, 1 reply; 8+ messages in thread
From: Martin Michlmayr @ 2008-07-05 7:04 UTC (permalink / raw)
To: Thomas Bogendoerfer; +Cc: linux-mips
* Thomas Bogendoerfer <tsbogend@alpha.franken.de> [2008-07-05 00:51]:
> --- /dev/null
> +++ b/drivers/input/misc/sgio2_btns.c
> @@ -0,0 +1,154 @@
> +/*
> + * Cobalt button interface driver.
You should update that text.
--
Martin Michlmayr
http://www.cyrius.com/
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: SGI O2 sound driver v6
2008-07-05 7:04 ` Martin Michlmayr
@ 2008-07-05 8:04 ` Thomas Bogendoerfer
0 siblings, 0 replies; 8+ messages in thread
From: Thomas Bogendoerfer @ 2008-07-05 8:04 UTC (permalink / raw)
To: Martin Michlmayr; +Cc: linux-mips
On Sat, Jul 05, 2008 at 10:04:10AM +0300, Martin Michlmayr wrote:
> * Thomas Bogendoerfer <tsbogend@alpha.franken.de> [2008-07-05 00:51]:
> > --- /dev/null
> > +++ b/drivers/input/misc/sgio2_btns.c
> > @@ -0,0 +1,154 @@
> > +/*
> > + * Cobalt button interface driver.
>
> You should update that text.
of course. I noticed it, while preparing the patch for maintainer submission
and fixed it. Thanks for noticing.
Thomas.
--
Crap can work. Given enough thrust pigs will fly, but it's not necessary a
good idea. [ RFC1925, 2.3 ]
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2008-07-05 8:32 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-06-28 0:09 SGI O2 sound driver Thomas Bogendoerfer
2008-06-28 14:13 ` Thomas Bogendoerfer
2008-06-28 22:45 ` Thomas Bogendoerfer
2008-06-29 22:35 ` SGI O2 sound driver v4 Thomas Bogendoerfer
2008-07-02 23:21 ` Thomas Bogendoerfer
2008-07-04 22:51 ` SGI O2 sound driver v6 Thomas Bogendoerfer
2008-07-05 7:04 ` Martin Michlmayr
2008-07-05 8:04 ` Thomas Bogendoerfer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox