From: Florian Fainelli <florian@openwrt.org>
To: Graham Gower <graham.gower@gmail.com>, Mirko Vogt <lists@nanl.de>,
"Lars-Peter Clausen" <lars@metafoo.de>
Cc: linux-mips@linux-mips.org
Subject: Re: [PATCH 0/3] XBurst JZ4730 support
Date: Thu, 25 Feb 2010 08:52:09 +0100 [thread overview]
Message-ID: <201002250852.09638.florian@openwrt.org> (raw)
In-Reply-To: <4B861890.6090002@gmail.com>
Hi Graham,
On Thursday 25 February 2010 07:28:32 Graham Gower wrote:
> This patch set contains support for Ingenic's XBurst cpu, plus basic
> support for their JZ4730 reference boards.
>
>
> Graham Gower (3):
> Add XBurst JZ4730 support.
> 8250: serial driver changes for XBurst SoCs.
> net: add driver for JZ4730 ethernet controller.
Seems like patches 1 and 3 were too big and got retained by the mailing-list
program.
Maybe you should work with the OpenWrt and qi-hardware guys to get the jz4740
also merged in the same time?
>
> arch/mips/Kconfig | 13 +
> arch/mips/Makefile | 14 +-
> arch/mips/boot/Makefile | 15 +-
> arch/mips/include/asm/bootinfo.h | 7 +
> arch/mips/include/asm/cpu.h | 9 +
> arch/mips/include/asm/mach-generic/irq.h | 2 +-
> arch/mips/include/asm/mach-xburst/clock-jz4730.h | 41 +
> arch/mips/include/asm/mach-xburst/dma-jz4730.h | 156 +++
> arch/mips/include/asm/mach-xburst/irq-jz4730.h | 33 +
> arch/mips/include/asm/mach-xburst/uart-jz4730.h | 141 +++
> arch/mips/include/asm/mach-xburst/war.h | 25 +
> arch/mips/include/asm/mach-xburst/xburst.h | 20 +
> arch/mips/include/asm/r4kcache.h | 240 +++++
> arch/mips/kernel/cpu-probe.c | 21 +
> arch/mips/mm/c-r4k.c | 30 +
> arch/mips/mm/tlbex.c | 5 +
> arch/mips/xburst/Kconfig | 23 +
> arch/mips/xburst/Makefile | 3 +
> arch/mips/xburst/jz4730/Makefile | 11 +
> arch/mips/xburst/jz4730/board-libra.c | 32 +
> arch/mips/xburst/jz4730/board-pmp.c | 32 +
> arch/mips/xburst/jz4730/clocks.c | 294 +++++
> arch/mips/xburst/jz4730/irq.c | 104 ++
> arch/mips/xburst/jz4730/platform.c | 49 +
> arch/mips/xburst/jz4730/prom.c | 104 ++
> arch/mips/xburst/jz4730/setup.c | 136 +++
> arch/mips/xburst/jz4730/time.c | 140 +++
> drivers/net/Kconfig | 10 +
> drivers/net/Makefile | 1 +
> drivers/net/jz_eth.c | 1232
> ++++++++++++++++++++++ drivers/net/jz_eth.h |
> 403 +++++++
> drivers/serial/8250.c | 12 +
> 32 files changed, 3355 insertions(+), 3 deletions(-)
> create mode 100644 arch/mips/include/asm/mach-xburst/clock-jz4730.h
> create mode 100644 arch/mips/include/asm/mach-xburst/dma-jz4730.h
> create mode 100644 arch/mips/include/asm/mach-xburst/irq-jz4730.h
> create mode 100644 arch/mips/include/asm/mach-xburst/uart-jz4730.h
> create mode 100644 arch/mips/include/asm/mach-xburst/war.h
> create mode 100644 arch/mips/include/asm/mach-xburst/xburst.h
> create mode 100644 arch/mips/xburst/Kconfig
> create mode 100644 arch/mips/xburst/Makefile
> create mode 100644 arch/mips/xburst/jz4730/Makefile
> create mode 100644 arch/mips/xburst/jz4730/board-libra.c
> create mode 100644 arch/mips/xburst/jz4730/board-pmp.c
> create mode 100644 arch/mips/xburst/jz4730/clocks.c
> create mode 100644 arch/mips/xburst/jz4730/irq.c
> create mode 100644 arch/mips/xburst/jz4730/platform.c
> create mode 100644 arch/mips/xburst/jz4730/prom.c
> create mode 100644 arch/mips/xburst/jz4730/setup.c
> create mode 100644 arch/mips/xburst/jz4730/time.c
> create mode 100644 drivers/net/jz_eth.c
> create mode 100644 drivers/net/jz_eth.h
>
--
Regards, Florian
next prev parent reply other threads:[~2010-02-25 7:54 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-25 6:28 [PATCH 0/3] XBurst JZ4730 support Graham Gower
2010-02-25 6:29 ` [PATCH 1/3] Add " Graham Gower
2010-02-25 6:30 ` [PATCH 2/3] 8250: serial driver changes for XBurst SoCs Graham Gower
2010-02-25 6:31 ` [PATCH 3/3] net: add driver for JZ4730 ethernet controller Graham Gower
2010-02-25 7:52 ` Florian Fainelli [this message]
2010-02-25 21:12 ` [PATCH 0/3] XBurst JZ4730 support Graham Gower
2010-02-26 1:51 ` Lars-Peter Clausen
2010-02-26 3:34 ` Graham Gower
2010-02-26 11:41 ` blast_dcache32 problem with PREEMPT kernel Anoop P.A.
2010-02-26 11:41 ` Anoop P.A.
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201002250852.09638.florian@openwrt.org \
--to=florian@openwrt.org \
--cc=graham.gower@gmail.com \
--cc=lars@metafoo.de \
--cc=linux-mips@linux-mips.org \
--cc=lists@nanl.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox