From: Graham Gower <graham.gower@gmail.com>
To: linux-mips@linux-mips.org
Subject: [PATCH 0/3] XBurst JZ4730 support
Date: Thu, 25 Feb 2010 16:58:32 +1030 [thread overview]
Message-ID: <4B861890.6090002@gmail.com> (raw)
This patch set contains support for Ingenic's XBurst cpu, plus basic
support for their JZ4730 reference boards.
Graham Gower (3):
Add XBurst JZ4730 support.
8250: serial driver changes for XBurst SoCs.
net: add driver for JZ4730 ethernet controller.
arch/mips/Kconfig | 13 +
arch/mips/Makefile | 14 +-
arch/mips/boot/Makefile | 15 +-
arch/mips/include/asm/bootinfo.h | 7 +
arch/mips/include/asm/cpu.h | 9 +
arch/mips/include/asm/mach-generic/irq.h | 2 +-
arch/mips/include/asm/mach-xburst/clock-jz4730.h | 41 +
arch/mips/include/asm/mach-xburst/dma-jz4730.h | 156 +++
arch/mips/include/asm/mach-xburst/irq-jz4730.h | 33 +
arch/mips/include/asm/mach-xburst/uart-jz4730.h | 141 +++
arch/mips/include/asm/mach-xburst/war.h | 25 +
arch/mips/include/asm/mach-xburst/xburst.h | 20 +
arch/mips/include/asm/r4kcache.h | 240 +++++
arch/mips/kernel/cpu-probe.c | 21 +
arch/mips/mm/c-r4k.c | 30 +
arch/mips/mm/tlbex.c | 5 +
arch/mips/xburst/Kconfig | 23 +
arch/mips/xburst/Makefile | 3 +
arch/mips/xburst/jz4730/Makefile | 11 +
arch/mips/xburst/jz4730/board-libra.c | 32 +
arch/mips/xburst/jz4730/board-pmp.c | 32 +
arch/mips/xburst/jz4730/clocks.c | 294 +++++
arch/mips/xburst/jz4730/irq.c | 104 ++
arch/mips/xburst/jz4730/platform.c | 49 +
arch/mips/xburst/jz4730/prom.c | 104 ++
arch/mips/xburst/jz4730/setup.c | 136 +++
arch/mips/xburst/jz4730/time.c | 140 +++
drivers/net/Kconfig | 10 +
drivers/net/Makefile | 1 +
drivers/net/jz_eth.c | 1232 ++++++++++++++++++++++
drivers/net/jz_eth.h | 403 +++++++
drivers/serial/8250.c | 12 +
32 files changed, 3355 insertions(+), 3 deletions(-)
create mode 100644 arch/mips/include/asm/mach-xburst/clock-jz4730.h
create mode 100644 arch/mips/include/asm/mach-xburst/dma-jz4730.h
create mode 100644 arch/mips/include/asm/mach-xburst/irq-jz4730.h
create mode 100644 arch/mips/include/asm/mach-xburst/uart-jz4730.h
create mode 100644 arch/mips/include/asm/mach-xburst/war.h
create mode 100644 arch/mips/include/asm/mach-xburst/xburst.h
create mode 100644 arch/mips/xburst/Kconfig
create mode 100644 arch/mips/xburst/Makefile
create mode 100644 arch/mips/xburst/jz4730/Makefile
create mode 100644 arch/mips/xburst/jz4730/board-libra.c
create mode 100644 arch/mips/xburst/jz4730/board-pmp.c
create mode 100644 arch/mips/xburst/jz4730/clocks.c
create mode 100644 arch/mips/xburst/jz4730/irq.c
create mode 100644 arch/mips/xburst/jz4730/platform.c
create mode 100644 arch/mips/xburst/jz4730/prom.c
create mode 100644 arch/mips/xburst/jz4730/setup.c
create mode 100644 arch/mips/xburst/jz4730/time.c
create mode 100644 drivers/net/jz_eth.c
create mode 100644 drivers/net/jz_eth.h
next reply other threads:[~2010-02-25 6:30 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-25 6:28 Graham Gower [this message]
2010-02-25 6:29 ` [PATCH 1/3] Add XBurst JZ4730 support Graham Gower
2010-02-25 6:30 ` [PATCH 2/3] 8250: serial driver changes for XBurst SoCs Graham Gower
2010-02-25 6:31 ` [PATCH 3/3] net: add driver for JZ4730 ethernet controller Graham Gower
2010-02-25 7:52 ` [PATCH 0/3] XBurst JZ4730 support Florian Fainelli
2010-02-25 21:12 ` Graham Gower
2010-02-26 1:51 ` Lars-Peter Clausen
2010-02-26 3:34 ` Graham Gower
2010-02-26 11:41 ` blast_dcache32 problem with PREEMPT kernel Anoop P.A.
2010-02-26 11:41 ` Anoop P.A.
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B861890.6090002@gmail.com \
--to=graham.gower@gmail.com \
--cc=linux-mips@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox