* [PATCH 02/12] MIPS: Netlogic: Use CPU_XLR instead of NLM_XLR
@ 2011-10-23 13:38 Jayachandran C
2011-10-23 13:38 ` Jayachandran C
0 siblings, 1 reply; 5+ messages in thread
From: Jayachandran C @ 2011-10-23 13:38 UTC (permalink / raw)
To: ralf, linux-mips
The CPU_XLR config variable is sufficient for XLR compilation, the
variable NLM_XLR can be removed.
Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com>
---
arch/mips/Kconfig | 1 -
arch/mips/netlogic/Kconfig | 3 ---
arch/mips/netlogic/Platform | 4 ++--
arch/mips/pci/Makefile | 2 +-
4 files changed, 3 insertions(+), 7 deletions(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 2bb1c85..bbc4e0e 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -765,7 +765,6 @@ config NLM_XLR_BOARD
depends on EXPERIMENTAL
select BOOT_ELF32
select NLM_COMMON
- select NLM_XLR
select SYS_HAS_CPU_XLR
select SYS_SUPPORTS_SMP
select HW_HAS_PCI
diff --git a/arch/mips/netlogic/Kconfig b/arch/mips/netlogic/Kconfig
index a5ca743..75bec44 100644
--- a/arch/mips/netlogic/Kconfig
+++ b/arch/mips/netlogic/Kconfig
@@ -1,5 +1,2 @@
config NLM_COMMON
bool
-
-config NLM_XLR
- bool
diff --git a/arch/mips/netlogic/Platform b/arch/mips/netlogic/Platform
index 4fb6b83..18aaf43 100644
--- a/arch/mips/netlogic/Platform
+++ b/arch/mips/netlogic/Platform
@@ -7,10 +7,10 @@ cflags-$(CONFIG_NLM_COMMON) += -I$(srctree)/arch/mips/include/asm/netlogic
#
# use mips64 if xlr is not available
#
-cflags-$(CONFIG_NLM_XLR) += $(call cc-option,-march=xlr,-march=mips64)
+cflags-$(CONFIG_CPU_XLR) += $(call cc-option,-march=xlr,-march=mips64)
#
# NETLOGIC processor support
#
-platform-$(CONFIG_NLM_XLR) += netlogic/xlr
+platform-$(CONFIG_CPU_XLR) += netlogic/xlr
load-$(CONFIG_NLM_COMMON) += 0xffffffff80100000
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 4df8799..3141e141 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -56,7 +56,7 @@ obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o
obj-$(CONFIG_CPU_CAVIUM_OCTEON) += pci-octeon.o pcie-octeon.o
-obj-$(CONFIG_NLM_XLR) += pci-xlr.o
+obj-$(CONFIG_CPU_XLR) += pci-xlr.o
ifdef CONFIG_PCI_MSI
obj-$(CONFIG_CPU_CAVIUM_OCTEON) += msi-octeon.o
--
1.7.4.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 02/12] MIPS: Netlogic: Use CPU_XLR instead of NLM_XLR
2011-10-23 13:38 [PATCH 02/12] MIPS: Netlogic: Use CPU_XLR instead of NLM_XLR Jayachandran C
@ 2011-10-23 13:38 ` Jayachandran C
0 siblings, 0 replies; 5+ messages in thread
From: Jayachandran C @ 2011-10-23 13:38 UTC (permalink / raw)
To: ralf, linux-mips
The CPU_XLR config variable is sufficient for XLR compilation, the
variable NLM_XLR can be removed.
Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com>
---
arch/mips/Kconfig | 1 -
arch/mips/netlogic/Kconfig | 3 ---
arch/mips/netlogic/Platform | 4 ++--
arch/mips/pci/Makefile | 2 +-
4 files changed, 3 insertions(+), 7 deletions(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 2bb1c85..bbc4e0e 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -765,7 +765,6 @@ config NLM_XLR_BOARD
depends on EXPERIMENTAL
select BOOT_ELF32
select NLM_COMMON
- select NLM_XLR
select SYS_HAS_CPU_XLR
select SYS_SUPPORTS_SMP
select HW_HAS_PCI
diff --git a/arch/mips/netlogic/Kconfig b/arch/mips/netlogic/Kconfig
index a5ca743..75bec44 100644
--- a/arch/mips/netlogic/Kconfig
+++ b/arch/mips/netlogic/Kconfig
@@ -1,5 +1,2 @@
config NLM_COMMON
bool
-
-config NLM_XLR
- bool
diff --git a/arch/mips/netlogic/Platform b/arch/mips/netlogic/Platform
index 4fb6b83..18aaf43 100644
--- a/arch/mips/netlogic/Platform
+++ b/arch/mips/netlogic/Platform
@@ -7,10 +7,10 @@ cflags-$(CONFIG_NLM_COMMON) += -I$(srctree)/arch/mips/include/asm/netlogic
#
# use mips64 if xlr is not available
#
-cflags-$(CONFIG_NLM_XLR) += $(call cc-option,-march=xlr,-march=mips64)
+cflags-$(CONFIG_CPU_XLR) += $(call cc-option,-march=xlr,-march=mips64)
#
# NETLOGIC processor support
#
-platform-$(CONFIG_NLM_XLR) += netlogic/xlr
+platform-$(CONFIG_CPU_XLR) += netlogic/xlr
load-$(CONFIG_NLM_COMMON) += 0xffffffff80100000
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 4df8799..3141e141 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -56,7 +56,7 @@ obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o
obj-$(CONFIG_CPU_CAVIUM_OCTEON) += pci-octeon.o pcie-octeon.o
-obj-$(CONFIG_NLM_XLR) += pci-xlr.o
+obj-$(CONFIG_CPU_XLR) += pci-xlr.o
ifdef CONFIG_PCI_MSI
obj-$(CONFIG_CPU_CAVIUM_OCTEON) += msi-octeon.o
--
1.7.4.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 02/12] MIPS: Netlogic: Use CPU_XLR instead of NLM_XLR
2011-11-11 11:37 [PATCH 00/12] MIPS: Support for Netlogic XLP processors Jayachandran C
@ 2011-11-11 11:37 ` Jayachandran C
2011-11-11 11:37 ` Jayachandran C
2011-11-16 0:46 ` Ralf Baechle
0 siblings, 2 replies; 5+ messages in thread
From: Jayachandran C @ 2011-11-11 11:37 UTC (permalink / raw)
To: linux-mips, ralf
The CPU_XLR config variable is sufficient for XLR compilation, the
variable NLM_XLR can be removed.
Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com>
---
arch/mips/Kconfig | 1 -
arch/mips/netlogic/Kconfig | 3 ---
arch/mips/netlogic/Platform | 4 ++--
arch/mips/pci/Makefile | 2 +-
4 files changed, 3 insertions(+), 7 deletions(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 04ac89c..58515fd 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -761,7 +761,6 @@ config NLM_XLR_BOARD
depends on EXPERIMENTAL
select BOOT_ELF32
select NLM_COMMON
- select NLM_XLR
select SYS_HAS_CPU_XLR
select SYS_SUPPORTS_SMP
select HW_HAS_PCI
diff --git a/arch/mips/netlogic/Kconfig b/arch/mips/netlogic/Kconfig
index a5ca743..75bec44 100644
--- a/arch/mips/netlogic/Kconfig
+++ b/arch/mips/netlogic/Kconfig
@@ -1,5 +1,2 @@
config NLM_COMMON
bool
-
-config NLM_XLR
- bool
diff --git a/arch/mips/netlogic/Platform b/arch/mips/netlogic/Platform
index 4fb6b83..18aaf43 100644
--- a/arch/mips/netlogic/Platform
+++ b/arch/mips/netlogic/Platform
@@ -7,10 +7,10 @@ cflags-$(CONFIG_NLM_COMMON) += -I$(srctree)/arch/mips/include/asm/netlogic
#
# use mips64 if xlr is not available
#
-cflags-$(CONFIG_NLM_XLR) += $(call cc-option,-march=xlr,-march=mips64)
+cflags-$(CONFIG_CPU_XLR) += $(call cc-option,-march=xlr,-march=mips64)
#
# NETLOGIC processor support
#
-platform-$(CONFIG_NLM_XLR) += netlogic/xlr
+platform-$(CONFIG_CPU_XLR) += netlogic/xlr
load-$(CONFIG_NLM_COMMON) += 0xffffffff80100000
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index bb82cbd..65ca05c 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -55,7 +55,7 @@ obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o
obj-$(CONFIG_CPU_CAVIUM_OCTEON) += pci-octeon.o pcie-octeon.o
-obj-$(CONFIG_NLM_XLR) += pci-xlr.o
+obj-$(CONFIG_CPU_XLR) += pci-xlr.o
ifdef CONFIG_PCI_MSI
obj-$(CONFIG_CPU_CAVIUM_OCTEON) += msi-octeon.o
--
1.7.5.4
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 02/12] MIPS: Netlogic: Use CPU_XLR instead of NLM_XLR
2011-11-11 11:37 ` [PATCH 02/12] MIPS: Netlogic: Use CPU_XLR instead of NLM_XLR Jayachandran C
@ 2011-11-11 11:37 ` Jayachandran C
2011-11-16 0:46 ` Ralf Baechle
1 sibling, 0 replies; 5+ messages in thread
From: Jayachandran C @ 2011-11-11 11:37 UTC (permalink / raw)
To: linux-mips, ralf
The CPU_XLR config variable is sufficient for XLR compilation, the
variable NLM_XLR can be removed.
Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com>
---
arch/mips/Kconfig | 1 -
arch/mips/netlogic/Kconfig | 3 ---
arch/mips/netlogic/Platform | 4 ++--
arch/mips/pci/Makefile | 2 +-
4 files changed, 3 insertions(+), 7 deletions(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 04ac89c..58515fd 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -761,7 +761,6 @@ config NLM_XLR_BOARD
depends on EXPERIMENTAL
select BOOT_ELF32
select NLM_COMMON
- select NLM_XLR
select SYS_HAS_CPU_XLR
select SYS_SUPPORTS_SMP
select HW_HAS_PCI
diff --git a/arch/mips/netlogic/Kconfig b/arch/mips/netlogic/Kconfig
index a5ca743..75bec44 100644
--- a/arch/mips/netlogic/Kconfig
+++ b/arch/mips/netlogic/Kconfig
@@ -1,5 +1,2 @@
config NLM_COMMON
bool
-
-config NLM_XLR
- bool
diff --git a/arch/mips/netlogic/Platform b/arch/mips/netlogic/Platform
index 4fb6b83..18aaf43 100644
--- a/arch/mips/netlogic/Platform
+++ b/arch/mips/netlogic/Platform
@@ -7,10 +7,10 @@ cflags-$(CONFIG_NLM_COMMON) += -I$(srctree)/arch/mips/include/asm/netlogic
#
# use mips64 if xlr is not available
#
-cflags-$(CONFIG_NLM_XLR) += $(call cc-option,-march=xlr,-march=mips64)
+cflags-$(CONFIG_CPU_XLR) += $(call cc-option,-march=xlr,-march=mips64)
#
# NETLOGIC processor support
#
-platform-$(CONFIG_NLM_XLR) += netlogic/xlr
+platform-$(CONFIG_CPU_XLR) += netlogic/xlr
load-$(CONFIG_NLM_COMMON) += 0xffffffff80100000
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index bb82cbd..65ca05c 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -55,7 +55,7 @@ obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o
obj-$(CONFIG_CPU_CAVIUM_OCTEON) += pci-octeon.o pcie-octeon.o
-obj-$(CONFIG_NLM_XLR) += pci-xlr.o
+obj-$(CONFIG_CPU_XLR) += pci-xlr.o
ifdef CONFIG_PCI_MSI
obj-$(CONFIG_CPU_CAVIUM_OCTEON) += msi-octeon.o
--
1.7.5.4
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH 02/12] MIPS: Netlogic: Use CPU_XLR instead of NLM_XLR
2011-11-11 11:37 ` [PATCH 02/12] MIPS: Netlogic: Use CPU_XLR instead of NLM_XLR Jayachandran C
2011-11-11 11:37 ` Jayachandran C
@ 2011-11-16 0:46 ` Ralf Baechle
1 sibling, 0 replies; 5+ messages in thread
From: Ralf Baechle @ 2011-11-16 0:46 UTC (permalink / raw)
To: Jayachandran C; +Cc: linux-mips
Queued for 3.3. Thanks,
Ral
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2011-11-16 0:47 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-10-23 13:38 [PATCH 02/12] MIPS: Netlogic: Use CPU_XLR instead of NLM_XLR Jayachandran C
2011-10-23 13:38 ` Jayachandran C
-- strict thread matches above, loose matches on Subject: below --
2011-11-11 11:37 [PATCH 00/12] MIPS: Support for Netlogic XLP processors Jayachandran C
2011-11-11 11:37 ` [PATCH 02/12] MIPS: Netlogic: Use CPU_XLR instead of NLM_XLR Jayachandran C
2011-11-11 11:37 ` Jayachandran C
2011-11-16 0:46 ` Ralf Baechle
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox