Linux MIPS Architecture development
 help / color / mirror / Atom feed
From: Aurelien Jarno <aurelien@aurel32.net>
To: Huacai Chen <chenhc@lemote.com>
Cc: Ralf Baechle <ralf@linux-mips.org>,
	John Crispin <john@phrozen.org>,
	"Steven J. Hill" <Steven.Hill@imgtec.com>,
	linux-mips@linux-mips.org, Fuxin Zhang <zhangfx@lemote.com>,
	Zhangjin Wu <wuzhangjin@gmail.com>,
	Hongliang Tao <taohl@lemote.com>, Hua Yan <yanh@lemote.com>
Subject: Re: [PATCH V16 01/12] MIPS: Loongson: Add basic Loongson-3 definition
Date: Wed, 8 Jan 2014 20:58:32 +0100	[thread overview]
Message-ID: <20140108195832.GA10409@hall.aurel32.net> (raw)
In-Reply-To: <1389149068-24376-2-git-send-email-chenhc@lemote.com>

On Wed, Jan 08, 2014 at 10:44:17AM +0800, Huacai Chen wrote:
> Loongson-3 is a multi-core MIPS family CPU, it support MIPS64R2 fully.
> Loongson-3 has the same IMP field (0x6300) as Loongson-2.
> 
> Loongson-3 has a hardware-maintained cache, system software doesn't
> need to maintain coherency.
> 
> Loongson-3A is the first revision of Loongson-3, and it is the quad-
> core version of Loongson-2G. Loongson-3A has a simplified version named
> Loongson-2Gq, the main difference between Loongson-3A/2Gq is 3A has two
> HyperTransport controller but 2Gq has only one. HT0 is used for cross-
> chip interconnection and HT1 is used to link PCI bus. Therefore, 2Gq
> cannot support NUMA but 3A can. For software, Loongson-2Gq is simply
> identified as Loongson-3A.
> 
> Exsisting Loongson family CPUs:
> Loongson-1: Loongson-1A, Loongson-1B, they are 32-bit MIPS CPUs.
> Loongson-2: Loongson-2E, Loongson-2F, Loongson-2G, they are 64-bit
>             single-core MIPS CPUs.
> Loongson-3: Loongson-3A(including so-called Loongson-2Gq), they are
>             64-bit multi-core MIPS CPUs.
> 
> Signed-off-by: Huacai Chen <chenhc@lemote.com>
> Signed-off-by: Hongliang Tao <taohl@lemote.com>
> Signed-off-by: Hua Yan <yanh@lemote.com>
> ---
>  arch/mips/include/asm/addrspace.h            |    2 ++
>  arch/mips/include/asm/cpu.h                  |    5 +++--
>  arch/mips/include/asm/mach-loongson/spaces.h |   13 +++++++++++++
>  arch/mips/include/asm/module.h               |    2 ++
>  arch/mips/include/asm/pgtable-bits.h         |    9 +++++++++
>  5 files changed, 29 insertions(+), 2 deletions(-)
>  create mode 100644 arch/mips/include/asm/mach-loongson/spaces.h
> 
> diff --git a/arch/mips/include/asm/addrspace.h b/arch/mips/include/asm/addrspace.h
> index 3f74545..41c030e 100644
> --- a/arch/mips/include/asm/addrspace.h
> +++ b/arch/mips/include/asm/addrspace.h
> @@ -116,7 +116,9 @@
>  #define K_CALG_UNCACHED		2
>  #define K_CALG_NONCOHERENT	3
>  #define K_CALG_COH_EXCL		4
> +#ifndef K_CALG_COH_SHAREABLE
>  #define K_CALG_COH_SHAREABLE	5
> +#endif
>  #define K_CALG_NOTUSED		6
>  #define K_CALG_UNCACHED_ACCEL	7
>  
> diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
> index d2035e1..7fffaf1 100644
> --- a/arch/mips/include/asm/cpu.h
> +++ b/arch/mips/include/asm/cpu.h
> @@ -224,6 +224,7 @@
>  #define PRID_REV_LOONGSON1B	0x0020
>  #define PRID_REV_LOONGSON2E	0x0002
>  #define PRID_REV_LOONGSON2F	0x0003
> +#define PRID_REV_LOONGSON3A	0x0005
>  
>  /*
>   * Older processors used to encode processor version and revision in two
> @@ -295,8 +296,8 @@ enum cpu_type_enum {
>  	 * MIPS64 class processors
>  	 */
>  	CPU_5KC, CPU_5KE, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2,
> -	CPU_CAVIUM_OCTEON, CPU_CAVIUM_OCTEON_PLUS, CPU_CAVIUM_OCTEON2,
> -	CPU_CAVIUM_OCTEON3, CPU_XLR, CPU_XLP,
> +	CPU_LOONGSON3, CPU_CAVIUM_OCTEON, CPU_CAVIUM_OCTEON_PLUS,
> +	CPU_CAVIUM_OCTEON2, CPU_CAVIUM_OCTEON3, CPU_XLR, CPU_XLP,
>  
>  	CPU_LAST
>  };
> diff --git a/arch/mips/include/asm/mach-loongson/spaces.h b/arch/mips/include/asm/mach-loongson/spaces.h
> new file mode 100644
> index 0000000..d368d95
> --- /dev/null
> +++ b/arch/mips/include/asm/mach-loongson/spaces.h
> @@ -0,0 +1,13 @@
> +#ifndef __ASM_MACH_LOONGSON_SPACES_H_
> +#define __ASM_MACH_LOONGSON_SPACES_H_
> +
> +#ifndef CAC_BASE
> +#if defined(CONFIG_64BIT)
> +#define CAC_BASE        _AC(0x9800000000000000, UL)
> +#endif /* CONFIG_64BIT */
> +#endif /* CONFIG_CAC_BASE */
> +
> +#define K_CALG_COH_SHAREABLE	3
> +
> +#include <asm/mach-generic/spaces.h>
> +#endif
> diff --git a/arch/mips/include/asm/module.h b/arch/mips/include/asm/module.h
> index 44b705d..c2edae3 100644
> --- a/arch/mips/include/asm/module.h
> +++ b/arch/mips/include/asm/module.h
> @@ -126,6 +126,8 @@ search_module_dbetables(unsigned long addr)
>  #define MODULE_PROC_FAMILY "LOONGSON1 "
>  #elif defined CONFIG_CPU_LOONGSON2
>  #define MODULE_PROC_FAMILY "LOONGSON2 "
> +#elif defined CONFIG_CPU_LOONGSON3
> +#define MODULE_PROC_FAMILY "LOONGSON3 "
>  #elif defined CONFIG_CPU_CAVIUM_OCTEON
>  #define MODULE_PROC_FAMILY "OCTEON "
>  #elif defined CONFIG_CPU_XLR
> diff --git a/arch/mips/include/asm/pgtable-bits.h b/arch/mips/include/asm/pgtable-bits.h
> index 32aea48..e592f36 100644
> --- a/arch/mips/include/asm/pgtable-bits.h
> +++ b/arch/mips/include/asm/pgtable-bits.h
> @@ -235,6 +235,15 @@ static inline uint64_t pte_to_entrylo(unsigned long pte_val)
>  #define _CACHE_CACHABLE_NONCOHERENT (5<<_CACHE_SHIFT)
>  #define _CACHE_UNCACHED_ACCELERATED (7<<_CACHE_SHIFT)
>  
> +#elif defined(CONFIG_CPU_LOONGSON3)
> +
> +/* Using COHERENT flag for NONCOHERENT doesn't hurt. */
> +
> +#define _CACHE_UNCACHED             (2<<_CACHE_SHIFT)  /* LOONGSON       */
> +#define _CACHE_CACHABLE_NONCOHERENT (3<<_CACHE_SHIFT)  /* LOONGSON       */
> +#define _CACHE_CACHABLE_COHERENT    (3<<_CACHE_SHIFT)  /* LOONGSON-3     */
> +#define _CACHE_UNCACHED_ACCELERATED (7<<_CACHE_SHIFT)  /* LOONGSON       */
> +
>  #else
>  
>  #define _CACHE_CACHABLE_NO_WA	    (0<<_CACHE_SHIFT)  /* R4600 only	  */

Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>

-- 
Aurelien Jarno	                        GPG: 1024D/F1BCDB73
aurelien@aurel32.net                 http://www.aurel32.net

  reply	other threads:[~2014-01-08 19:58 UTC|newest]

Thread overview: 55+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-08  2:44 [PATCH V16 00/12] MIPS: Add Loongson-3 based machines support Huacai Chen
2014-01-08  2:44 ` [PATCH V16 01/12] MIPS: Loongson: Add basic Loongson-3 definition Huacai Chen
2014-01-08 19:58   ` Aurelien Jarno [this message]
2014-01-08  2:44 ` [PATCH V16 02/12] MIPS: Loongson: Add basic Loongson-3 CPU support Huacai Chen
2014-01-08 19:58   ` Aurelien Jarno
     [not found]     ` <CAAhV-H4tx=sCk=iUwuCfnCS+rbmtu5Y_UcpAn6JXDoobA+OGrQ@mail.gmail.com>
2014-01-09 21:36       ` Aurelien Jarno
2014-01-12  9:03         ` Huacai Chen
2014-01-12  9:57           ` Aurelien Jarno
2014-01-12 12:10             ` Aaro Koskinen
2014-01-18  1:54               ` John Crispin
2014-01-08  2:44 ` [PATCH V16 03/12] MIPS: Loongson 3: Add Lemote-3A machtypes definition Huacai Chen
2014-01-08 19:58   ` Aurelien Jarno
2014-01-08  2:44 ` [PATCH V16 04/12] MIPS: Loongson: Add UEFI-like firmware interface (LEFI) support Huacai Chen
2014-01-08 22:58   ` Aurelien Jarno
2014-01-09 12:43     ` Alex Smith
2014-01-09 12:43       ` Alex Smith
     [not found]     ` <CAAhV-H64BXsw5CBL-KW1eqXkYcadhHF2NeBH9YmWQz046Lpzzw@mail.gmail.com>
2014-01-09 21:37       ` Aurelien Jarno
2014-01-09 12:37   ` Alex Smith
2014-01-09 12:37     ` Alex Smith
2014-01-08  2:44 ` [PATCH V16 05/12] MIPS: Loongson 3: Add HT-linked PCI support Huacai Chen
2014-01-08 22:58   ` Aurelien Jarno
     [not found]     ` <CAAhV-H57tDmYByjVwhf3teFZkGowR4E9+OO1vO0kP3iAKTNJVw@mail.gmail.com>
2014-01-09 21:38       ` Aurelien Jarno
2014-01-08  2:44 ` [PATCH V16 06/12] MIPS: Loongson 3: Add IRQ init and dispatch support Huacai Chen
2014-01-08 22:58   ` Aurelien Jarno
2014-01-09 12:52   ` Alex Smith
2014-01-09 12:52     ` Alex Smith
2014-01-08  2:44 ` [PATCH V16 07/12] MIPS: Loongson 3: Add serial port support Huacai Chen
2014-01-08 22:58   ` Aurelien Jarno
2014-01-08  2:44 ` [PATCH V16 08/12] MIPS: Loongson: Add swiotlb to support big memory (>4GB) Huacai Chen
2014-01-08 22:58   ` Aurelien Jarno
     [not found]     ` <CAAhV-H4h43N2OR4znwVv3miVbGkWJLapdgr9Jou1j4R8-9TRyA@mail.gmail.com>
2014-01-09 22:08       ` Aurelien Jarno
     [not found]         ` <CAAhV-H7WFdt-4jYG5qPV36UWJQnSfkSa2J-3CAs2+QLqwHVhuA@mail.gmail.com>
2014-01-11 15:24           ` Aurelien Jarno
2014-01-09 12:56   ` Alex Smith
2014-01-09 12:56     ` Alex Smith
     [not found]     ` <CAAhV-H7ZO0gNzQ5wQ-yD=NiP2AJrc3-bWLXHo-HDngf27c9+gQ@mail.gmail.com>
2014-01-11 15:25       ` Aurelien Jarno
2014-01-12  9:12         ` Huacai Chen
2014-01-12  9:57           ` Aurelien Jarno
2014-01-08  2:44 ` [PATCH V16 09/12] MIPS: Loongson: Add Loongson-3 Kconfig options Huacai Chen
2014-01-09 13:07   ` Alex Smith
2014-01-09 13:07     ` Alex Smith
2014-01-11 15:24     ` Aurelien Jarno
2014-01-13  3:02       ` Huacai Chen
2014-01-13  4:30         ` Aurelien Jarno
2014-01-13 10:15           ` Huacai Chen
2014-01-13 10:38             ` Aurelien Jarno
2014-01-13 12:15               ` Huacai Chen
2014-01-08  2:44 ` [PATCH V16 10/12] MIPS: Loongson 3: Add Loongson-3 SMP support Huacai Chen
2014-01-09 13:19   ` Alex Smith
2014-01-09 13:19     ` Alex Smith
2014-01-08  2:44 ` [PATCH V16 11/12] MIPS: Loongson 3: Add CPU hotplug support Huacai Chen
2014-01-11 15:24   ` Aurelien Jarno
2014-01-08  2:44 ` [PATCH V16 12/12] MIPS: Loongson: Add a Loongson-3 default config file Huacai Chen
2014-01-08  7:26 ` [PATCH V16 00/12] MIPS: Add Loongson-3 based machines support John Crispin
2014-01-18  9:38 ` Andreas Barth
     [not found]   ` <0466fa9d60b91233d2157d5ce0b51333.squirrel@mail.lemote.com>
2014-02-06 23:27     ` Andreas Barth

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140108195832.GA10409@hall.aurel32.net \
    --to=aurelien@aurel32.net \
    --cc=Steven.Hill@imgtec.com \
    --cc=chenhc@lemote.com \
    --cc=john@phrozen.org \
    --cc=linux-mips@linux-mips.org \
    --cc=ralf@linux-mips.org \
    --cc=taohl@lemote.com \
    --cc=wuzhangjin@gmail.com \
    --cc=yanh@lemote.com \
    --cc=zhangfx@lemote.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox