From: Alex Smith <alex.smith@imgtec.com>
To: Huacai Chen <chenhc@lemote.com>
Cc: Ralf Baechle <ralf@linux-mips.org>,
John Crispin <john@phrozen.org>,
"Steven J. Hill" <Steven.Hill@imgtec.com>,
Aurelien Jarno <aurelien@aurel32.net>,
<linux-mips@linux-mips.org>, Fuxin Zhang <zhangfx@lemote.com>,
Zhangjin Wu <wuzhangjin@gmail.com>,
Hongliang Tao <taohl@lemote.com>, Hua Yan <yanh@lemote.com>
Subject: Re: [PATCH V16 08/12] MIPS: Loongson: Add swiotlb to support big memory (>4GB)
Date: Thu, 9 Jan 2014 12:56:50 +0000 [thread overview]
Message-ID: <52CE9C92.9080400@imgtec.com> (raw)
In-Reply-To: <1389149068-24376-9-git-send-email-chenhc@lemote.com>
On 08/01/14 02:44, Huacai Chen wrote:
> This is probably a workaround because Loongson doesn't support DMA
> address above 4GB. If memory is more than 4GB, CONFIG_SWIOTLB and
> ZONE_DMA32 should be selected. In this way, DMA pages are allocated
> below 4GB preferably.
>
> However, CONFIG_SWIOTLB+ZONE_DMA32 is not enough, so, we provide a
> platform-specific dma_map_ops::set_dma_mask() to make sure each
> driver's dma_mask and coherent_dma_mask is below 32-bit.
>
> Signed-off-by: Huacai Chen <chenhc@lemote.com>
> Signed-off-by: Hongliang Tao <taohl@lemote.com>
> Signed-off-by: Hua Yan <yanh@lemote.com>
> ---
> arch/mips/include/asm/dma-mapping.h | 5 +
> .../mips/include/asm/mach-loongson/dma-coherence.h | 22 +++-
> arch/mips/loongson/common/Makefile | 5 +
> arch/mips/loongson/common/dma-swiotlb.c | 165 ++++++++++++++++++++
> 4 files changed, 196 insertions(+), 1 deletions(-)
> create mode 100644 arch/mips/loongson/common/dma-swiotlb.c
>
> diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h
> index 84238c5..06412aa 100644
> --- a/arch/mips/include/asm/dma-mapping.h
> +++ b/arch/mips/include/asm/dma-mapping.h
> @@ -49,9 +49,14 @@ static inline int dma_mapping_error(struct device *dev, u64 mask)
> static inline int
> dma_set_mask(struct device *dev, u64 mask)
> {
> + struct dma_map_ops *ops = get_dma_ops(dev);
> +
> if(!dev->dma_mask || !dma_supported(dev, mask))
> return -EIO;
>
> + if (ops->set_dma_mask)
> + return ops->set_dma_mask(dev, mask);
> +
> *dev->dma_mask = mask;
>
> return 0;
> diff --git a/arch/mips/include/asm/mach-loongson/dma-coherence.h b/arch/mips/include/asm/mach-loongson/dma-coherence.h
> index aeb2c05..6a90275 100644
> --- a/arch/mips/include/asm/mach-loongson/dma-coherence.h
> +++ b/arch/mips/include/asm/mach-loongson/dma-coherence.h
> @@ -11,24 +11,40 @@
> #ifndef __ASM_MACH_LOONGSON_DMA_COHERENCE_H
> #define __ASM_MACH_LOONGSON_DMA_COHERENCE_H
>
> +#ifdef CONFIG_SWIOTLB
> +#include <linux/swiotlb.h>
> +#endif
> +
> struct device;
>
> +extern dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr);
> +extern phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr);
> static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
> size_t size)
> {
> +#ifdef CONFIG_CPU_LOONGSON3
> + return virt_to_phys(addr);
> +#else
> return virt_to_phys(addr) | 0x80000000;
> +#endif
> }
>
> static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
> struct page *page)
> {
> +#ifdef CONFIG_CPU_LOONGSON3
> + return page_to_phys(page);
> +#else
> return page_to_phys(page) | 0x80000000;
> +#endif
> }
>
> static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
> dma_addr_t dma_addr)
> {
> -#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
> +#if defined(CONFIG_CPU_LOONGSON3) && defined(CONFIG_64BIT)
> + return dma_addr;
> +#elif defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
> return (dma_addr > 0x8fffffff) ? dma_addr : (dma_addr & 0x0fffffff);
> #else
> return dma_addr & 0x7fffffff;
> @@ -55,7 +71,11 @@ static inline int plat_dma_supported(struct device *dev, u64 mask)
>
> static inline int plat_device_is_coherent(struct device *dev)
> {
> +#ifdef CONFIG_DMA_NONCOHERENT
> return 0;
> +#else
> + return 1;
> +#endif /* CONFIG_DMA_NONCOHERENT */
> }
>
> #endif /* __ASM_MACH_LOONGSON_DMA_COHERENCE_H */
> diff --git a/arch/mips/loongson/common/Makefile b/arch/mips/loongson/common/Makefile
> index 9e4484c..0bb9cc9 100644
> --- a/arch/mips/loongson/common/Makefile
> +++ b/arch/mips/loongson/common/Makefile
> @@ -26,3 +26,8 @@ obj-$(CONFIG_CS5536) += cs5536/
> #
>
> obj-$(CONFIG_LOONGSON_SUSPEND) += pm.o
> +
> +#
> +# Big Memory (SWIOTLB) Support
> +#
> +obj-$(CONFIG_SWIOTLB) += dma-swiotlb.o
> diff --git a/arch/mips/loongson/common/dma-swiotlb.c b/arch/mips/loongson/common/dma-swiotlb.c
> new file mode 100644
> index 0000000..9d5451b
> --- /dev/null
> +++ b/arch/mips/loongson/common/dma-swiotlb.c
> @@ -0,0 +1,165 @@
> +#include <linux/mm.h>
> +#include <linux/init.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/scatterlist.h>
> +#include <linux/swiotlb.h>
> +#include <linux/bootmem.h>
> +
> +#include <asm/bootinfo.h>
> +#include <dma-coherence.h>
> +
> +static void *loongson_dma_alloc_coherent(struct device *dev, size_t size,
> + dma_addr_t *dma_handle, gfp_t gfp, struct dma_attrs *attrs)
> +{
> + void *ret;
> +
> + if (dma_alloc_from_coherent(dev, size, dma_handle, &ret))
> + return ret;
> +
> + /* ignore region specifiers */
> + gfp &= ~(__GFP_DMA | __GFP_DMA32 | __GFP_HIGHMEM);
> +
> +#ifdef CONFIG_ISA
> + if (dev == NULL)
> + gfp |= __GFP_DMA;
> + else
> +#endif
> +#ifdef CONFIG_ZONE_DMA
> + if (dev->coherent_dma_mask < DMA_BIT_MASK(32))
> + gfp |= __GFP_DMA;
> + else
> +#endif
> +#ifdef CONFIG_ZONE_DMA32
> + /* Loongson-3 only support DMA in the memory below 4GB now */
> + if (dev->coherent_dma_mask < DMA_BIT_MASK(40))
> + gfp |= __GFP_DMA32;
> + else
> +#endif
> + ;
> + gfp |= __GFP_NORETRY;
> +
> + ret = swiotlb_alloc_coherent(dev, size, dma_handle, gfp);
> + mb();
> + return ret;
> +}
> +
> +static void loongson_dma_free_coherent(struct device *dev, size_t size,
> + void *vaddr, dma_addr_t dma_handle, struct dma_attrs *attrs)
> +{
> + int order = get_order(size);
> +
> + if (dma_release_from_coherent(dev, order, vaddr))
> + return;
> +
> + swiotlb_free_coherent(dev, size, vaddr, dma_handle);
> +}
> +
> +static dma_addr_t loongson_dma_map_page(struct device *dev, struct page *page,
> + unsigned long offset, size_t size,
> + enum dma_data_direction dir,
> + struct dma_attrs *attrs)
> +{
> + dma_addr_t daddr = swiotlb_map_page(dev, page, offset, size,
> + dir, attrs);
> + mb();
> + return daddr;
> +}
> +
> +static int loongson_dma_map_sg(struct device *dev, struct scatterlist *sg,
> + int nents, enum dma_data_direction dir,
> + struct dma_attrs *attrs)
> +{
> + int r = swiotlb_map_sg_attrs(dev, sg, nents, dir, NULL);
> + mb();
> +
> + return r;
> +}
> +
> +static void loongson_dma_sync_single_for_device(struct device *dev,
> + dma_addr_t dma_handle, size_t size,
> + enum dma_data_direction dir)
> +{
> + swiotlb_sync_single_for_device(dev, dma_handle, size, dir);
> + mb();
> +}
> +
> +static void loongson_dma_sync_sg_for_device(struct device *dev,
> + struct scatterlist *sg, int nents,
> + enum dma_data_direction dir)
> +{
> + swiotlb_sync_sg_for_device(dev, sg, nents, dir);
> + mb();
> +}
> +
> +static dma_addr_t
> +loongson_unity_phys_to_dma(struct device *dev, phys_addr_t paddr)
> +{
> + return paddr;
> +}
> +
> +static phys_addr_t
> +loongson_unity_dma_to_phys(struct device *dev, dma_addr_t daddr)
> +{
> + return daddr;
> +}
> +
> +struct loongson_dma_map_ops {
> + struct dma_map_ops dma_map_ops;
> + dma_addr_t (*phys_to_dma)(struct device *dev, phys_addr_t paddr);
> + phys_addr_t (*dma_to_phys)(struct device *dev, dma_addr_t daddr);
> +};
> +
> +dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
> +{
> + struct loongson_dma_map_ops *ops = container_of(get_dma_ops(dev),
> + struct loongson_dma_map_ops, dma_map_ops);
> +
> + return ops->phys_to_dma(dev, paddr);
> +}
> +
> +phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
> +{
> + struct loongson_dma_map_ops *ops = container_of(get_dma_ops(dev),
> + struct loongson_dma_map_ops, dma_map_ops);
> +
> + return ops->dma_to_phys(dev, daddr);
> +}
This seems a little bit convoluted. Since phys_to_dma and dma_to_phys
will always end up calling the loongson_unity_ functions, I don't see
any point in having the loongson_dma_map_ops structure to point to them.
You can just implement phys_to_dma and dma_to_phys as inlines in
mach-loongson/dma-coherence.h.
Thanks,
Alex
> +
> +static int loongson_dma_set_mask(struct device *dev, u64 mask)
> +{
> + /* Loongson doesn't support DMA above 32-bit */
> + if (mask > DMA_BIT_MASK(32)) {
> + *dev->dma_mask = DMA_BIT_MASK(32);
> + return -EIO;
> + }
> +
> + *dev->dma_mask = mask;
> +
> + return 0;
> +}
> +
> +static struct loongson_dma_map_ops loongson_linear_dma_map_ops = {
> + .dma_map_ops = {
> + .alloc = loongson_dma_alloc_coherent,
> + .free = loongson_dma_free_coherent,
> + .map_page = loongson_dma_map_page,
> + .unmap_page = swiotlb_unmap_page,
> + .map_sg = loongson_dma_map_sg,
> + .unmap_sg = swiotlb_unmap_sg_attrs,
> + .sync_single_for_cpu = swiotlb_sync_single_for_cpu,
> + .sync_single_for_device = loongson_dma_sync_single_for_device,
> + .sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
> + .sync_sg_for_device = loongson_dma_sync_sg_for_device,
> + .mapping_error = swiotlb_dma_mapping_error,
> + .dma_supported = swiotlb_dma_supported,
> + .set_dma_mask = loongson_dma_set_mask
> + },
> + .phys_to_dma = loongson_unity_phys_to_dma,
> + .dma_to_phys = loongson_unity_dma_to_phys
> +};
> +
> +void __init plat_swiotlb_setup(void)
> +{
> + swiotlb_init(1);
> + mips_dma_map_ops = &loongson_linear_dma_map_ops.dma_map_ops;
> +}
>
WARNING: multiple messages have this Message-ID (diff)
From: Alex Smith <alex.smith@imgtec.com>
To: Huacai Chen <chenhc@lemote.com>
Cc: Ralf Baechle <ralf@linux-mips.org>,
John Crispin <john@phrozen.org>,
"Steven J. Hill" <Steven.Hill@imgtec.com>,
Aurelien Jarno <aurelien@aurel32.net>,
linux-mips@linux-mips.org, Fuxin Zhang <zhangfx@lemote.com>,
Zhangjin Wu <wuzhangjin@gmail.com>,
Hongliang Tao <taohl@lemote.com>, Hua Yan <yanh@lemote.com>
Subject: Re: [PATCH V16 08/12] MIPS: Loongson: Add swiotlb to support big memory (>4GB)
Date: Thu, 9 Jan 2014 12:56:50 +0000 [thread overview]
Message-ID: <52CE9C92.9080400@imgtec.com> (raw)
Message-ID: <20140109125650.MWFwgOuSH26eOX6g-gyWlIreLTb6qr-YC0iSY5Usxnk@z> (raw)
In-Reply-To: <1389149068-24376-9-git-send-email-chenhc@lemote.com>
On 08/01/14 02:44, Huacai Chen wrote:
> This is probably a workaround because Loongson doesn't support DMA
> address above 4GB. If memory is more than 4GB, CONFIG_SWIOTLB and
> ZONE_DMA32 should be selected. In this way, DMA pages are allocated
> below 4GB preferably.
>
> However, CONFIG_SWIOTLB+ZONE_DMA32 is not enough, so, we provide a
> platform-specific dma_map_ops::set_dma_mask() to make sure each
> driver's dma_mask and coherent_dma_mask is below 32-bit.
>
> Signed-off-by: Huacai Chen <chenhc@lemote.com>
> Signed-off-by: Hongliang Tao <taohl@lemote.com>
> Signed-off-by: Hua Yan <yanh@lemote.com>
> ---
> arch/mips/include/asm/dma-mapping.h | 5 +
> .../mips/include/asm/mach-loongson/dma-coherence.h | 22 +++-
> arch/mips/loongson/common/Makefile | 5 +
> arch/mips/loongson/common/dma-swiotlb.c | 165 ++++++++++++++++++++
> 4 files changed, 196 insertions(+), 1 deletions(-)
> create mode 100644 arch/mips/loongson/common/dma-swiotlb.c
>
> diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h
> index 84238c5..06412aa 100644
> --- a/arch/mips/include/asm/dma-mapping.h
> +++ b/arch/mips/include/asm/dma-mapping.h
> @@ -49,9 +49,14 @@ static inline int dma_mapping_error(struct device *dev, u64 mask)
> static inline int
> dma_set_mask(struct device *dev, u64 mask)
> {
> + struct dma_map_ops *ops = get_dma_ops(dev);
> +
> if(!dev->dma_mask || !dma_supported(dev, mask))
> return -EIO;
>
> + if (ops->set_dma_mask)
> + return ops->set_dma_mask(dev, mask);
> +
> *dev->dma_mask = mask;
>
> return 0;
> diff --git a/arch/mips/include/asm/mach-loongson/dma-coherence.h b/arch/mips/include/asm/mach-loongson/dma-coherence.h
> index aeb2c05..6a90275 100644
> --- a/arch/mips/include/asm/mach-loongson/dma-coherence.h
> +++ b/arch/mips/include/asm/mach-loongson/dma-coherence.h
> @@ -11,24 +11,40 @@
> #ifndef __ASM_MACH_LOONGSON_DMA_COHERENCE_H
> #define __ASM_MACH_LOONGSON_DMA_COHERENCE_H
>
> +#ifdef CONFIG_SWIOTLB
> +#include <linux/swiotlb.h>
> +#endif
> +
> struct device;
>
> +extern dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr);
> +extern phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr);
> static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
> size_t size)
> {
> +#ifdef CONFIG_CPU_LOONGSON3
> + return virt_to_phys(addr);
> +#else
> return virt_to_phys(addr) | 0x80000000;
> +#endif
> }
>
> static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
> struct page *page)
> {
> +#ifdef CONFIG_CPU_LOONGSON3
> + return page_to_phys(page);
> +#else
> return page_to_phys(page) | 0x80000000;
> +#endif
> }
>
> static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
> dma_addr_t dma_addr)
> {
> -#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
> +#if defined(CONFIG_CPU_LOONGSON3) && defined(CONFIG_64BIT)
> + return dma_addr;
> +#elif defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
> return (dma_addr > 0x8fffffff) ? dma_addr : (dma_addr & 0x0fffffff);
> #else
> return dma_addr & 0x7fffffff;
> @@ -55,7 +71,11 @@ static inline int plat_dma_supported(struct device *dev, u64 mask)
>
> static inline int plat_device_is_coherent(struct device *dev)
> {
> +#ifdef CONFIG_DMA_NONCOHERENT
> return 0;
> +#else
> + return 1;
> +#endif /* CONFIG_DMA_NONCOHERENT */
> }
>
> #endif /* __ASM_MACH_LOONGSON_DMA_COHERENCE_H */
> diff --git a/arch/mips/loongson/common/Makefile b/arch/mips/loongson/common/Makefile
> index 9e4484c..0bb9cc9 100644
> --- a/arch/mips/loongson/common/Makefile
> +++ b/arch/mips/loongson/common/Makefile
> @@ -26,3 +26,8 @@ obj-$(CONFIG_CS5536) += cs5536/
> #
>
> obj-$(CONFIG_LOONGSON_SUSPEND) += pm.o
> +
> +#
> +# Big Memory (SWIOTLB) Support
> +#
> +obj-$(CONFIG_SWIOTLB) += dma-swiotlb.o
> diff --git a/arch/mips/loongson/common/dma-swiotlb.c b/arch/mips/loongson/common/dma-swiotlb.c
> new file mode 100644
> index 0000000..9d5451b
> --- /dev/null
> +++ b/arch/mips/loongson/common/dma-swiotlb.c
> @@ -0,0 +1,165 @@
> +#include <linux/mm.h>
> +#include <linux/init.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/scatterlist.h>
> +#include <linux/swiotlb.h>
> +#include <linux/bootmem.h>
> +
> +#include <asm/bootinfo.h>
> +#include <dma-coherence.h>
> +
> +static void *loongson_dma_alloc_coherent(struct device *dev, size_t size,
> + dma_addr_t *dma_handle, gfp_t gfp, struct dma_attrs *attrs)
> +{
> + void *ret;
> +
> + if (dma_alloc_from_coherent(dev, size, dma_handle, &ret))
> + return ret;
> +
> + /* ignore region specifiers */
> + gfp &= ~(__GFP_DMA | __GFP_DMA32 | __GFP_HIGHMEM);
> +
> +#ifdef CONFIG_ISA
> + if (dev == NULL)
> + gfp |= __GFP_DMA;
> + else
> +#endif
> +#ifdef CONFIG_ZONE_DMA
> + if (dev->coherent_dma_mask < DMA_BIT_MASK(32))
> + gfp |= __GFP_DMA;
> + else
> +#endif
> +#ifdef CONFIG_ZONE_DMA32
> + /* Loongson-3 only support DMA in the memory below 4GB now */
> + if (dev->coherent_dma_mask < DMA_BIT_MASK(40))
> + gfp |= __GFP_DMA32;
> + else
> +#endif
> + ;
> + gfp |= __GFP_NORETRY;
> +
> + ret = swiotlb_alloc_coherent(dev, size, dma_handle, gfp);
> + mb();
> + return ret;
> +}
> +
> +static void loongson_dma_free_coherent(struct device *dev, size_t size,
> + void *vaddr, dma_addr_t dma_handle, struct dma_attrs *attrs)
> +{
> + int order = get_order(size);
> +
> + if (dma_release_from_coherent(dev, order, vaddr))
> + return;
> +
> + swiotlb_free_coherent(dev, size, vaddr, dma_handle);
> +}
> +
> +static dma_addr_t loongson_dma_map_page(struct device *dev, struct page *page,
> + unsigned long offset, size_t size,
> + enum dma_data_direction dir,
> + struct dma_attrs *attrs)
> +{
> + dma_addr_t daddr = swiotlb_map_page(dev, page, offset, size,
> + dir, attrs);
> + mb();
> + return daddr;
> +}
> +
> +static int loongson_dma_map_sg(struct device *dev, struct scatterlist *sg,
> + int nents, enum dma_data_direction dir,
> + struct dma_attrs *attrs)
> +{
> + int r = swiotlb_map_sg_attrs(dev, sg, nents, dir, NULL);
> + mb();
> +
> + return r;
> +}
> +
> +static void loongson_dma_sync_single_for_device(struct device *dev,
> + dma_addr_t dma_handle, size_t size,
> + enum dma_data_direction dir)
> +{
> + swiotlb_sync_single_for_device(dev, dma_handle, size, dir);
> + mb();
> +}
> +
> +static void loongson_dma_sync_sg_for_device(struct device *dev,
> + struct scatterlist *sg, int nents,
> + enum dma_data_direction dir)
> +{
> + swiotlb_sync_sg_for_device(dev, sg, nents, dir);
> + mb();
> +}
> +
> +static dma_addr_t
> +loongson_unity_phys_to_dma(struct device *dev, phys_addr_t paddr)
> +{
> + return paddr;
> +}
> +
> +static phys_addr_t
> +loongson_unity_dma_to_phys(struct device *dev, dma_addr_t daddr)
> +{
> + return daddr;
> +}
> +
> +struct loongson_dma_map_ops {
> + struct dma_map_ops dma_map_ops;
> + dma_addr_t (*phys_to_dma)(struct device *dev, phys_addr_t paddr);
> + phys_addr_t (*dma_to_phys)(struct device *dev, dma_addr_t daddr);
> +};
> +
> +dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
> +{
> + struct loongson_dma_map_ops *ops = container_of(get_dma_ops(dev),
> + struct loongson_dma_map_ops, dma_map_ops);
> +
> + return ops->phys_to_dma(dev, paddr);
> +}
> +
> +phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
> +{
> + struct loongson_dma_map_ops *ops = container_of(get_dma_ops(dev),
> + struct loongson_dma_map_ops, dma_map_ops);
> +
> + return ops->dma_to_phys(dev, daddr);
> +}
This seems a little bit convoluted. Since phys_to_dma and dma_to_phys
will always end up calling the loongson_unity_ functions, I don't see
any point in having the loongson_dma_map_ops structure to point to them.
You can just implement phys_to_dma and dma_to_phys as inlines in
mach-loongson/dma-coherence.h.
Thanks,
Alex
> +
> +static int loongson_dma_set_mask(struct device *dev, u64 mask)
> +{
> + /* Loongson doesn't support DMA above 32-bit */
> + if (mask > DMA_BIT_MASK(32)) {
> + *dev->dma_mask = DMA_BIT_MASK(32);
> + return -EIO;
> + }
> +
> + *dev->dma_mask = mask;
> +
> + return 0;
> +}
> +
> +static struct loongson_dma_map_ops loongson_linear_dma_map_ops = {
> + .dma_map_ops = {
> + .alloc = loongson_dma_alloc_coherent,
> + .free = loongson_dma_free_coherent,
> + .map_page = loongson_dma_map_page,
> + .unmap_page = swiotlb_unmap_page,
> + .map_sg = loongson_dma_map_sg,
> + .unmap_sg = swiotlb_unmap_sg_attrs,
> + .sync_single_for_cpu = swiotlb_sync_single_for_cpu,
> + .sync_single_for_device = loongson_dma_sync_single_for_device,
> + .sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
> + .sync_sg_for_device = loongson_dma_sync_sg_for_device,
> + .mapping_error = swiotlb_dma_mapping_error,
> + .dma_supported = swiotlb_dma_supported,
> + .set_dma_mask = loongson_dma_set_mask
> + },
> + .phys_to_dma = loongson_unity_phys_to_dma,
> + .dma_to_phys = loongson_unity_dma_to_phys
> +};
> +
> +void __init plat_swiotlb_setup(void)
> +{
> + swiotlb_init(1);
> + mips_dma_map_ops = &loongson_linear_dma_map_ops.dma_map_ops;
> +}
>
next prev parent reply other threads:[~2014-01-09 12:57 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-08 2:44 [PATCH V16 00/12] MIPS: Add Loongson-3 based machines support Huacai Chen
2014-01-08 2:44 ` [PATCH V16 01/12] MIPS: Loongson: Add basic Loongson-3 definition Huacai Chen
2014-01-08 19:58 ` Aurelien Jarno
2014-01-08 2:44 ` [PATCH V16 02/12] MIPS: Loongson: Add basic Loongson-3 CPU support Huacai Chen
2014-01-08 19:58 ` Aurelien Jarno
[not found] ` <CAAhV-H4tx=sCk=iUwuCfnCS+rbmtu5Y_UcpAn6JXDoobA+OGrQ@mail.gmail.com>
2014-01-09 21:36 ` Aurelien Jarno
2014-01-12 9:03 ` Huacai Chen
2014-01-12 9:57 ` Aurelien Jarno
2014-01-12 12:10 ` Aaro Koskinen
2014-01-18 1:54 ` John Crispin
2014-01-08 2:44 ` [PATCH V16 03/12] MIPS: Loongson 3: Add Lemote-3A machtypes definition Huacai Chen
2014-01-08 19:58 ` Aurelien Jarno
2014-01-08 2:44 ` [PATCH V16 04/12] MIPS: Loongson: Add UEFI-like firmware interface (LEFI) support Huacai Chen
2014-01-08 22:58 ` Aurelien Jarno
2014-01-09 12:43 ` Alex Smith
2014-01-09 12:43 ` Alex Smith
[not found] ` <CAAhV-H64BXsw5CBL-KW1eqXkYcadhHF2NeBH9YmWQz046Lpzzw@mail.gmail.com>
2014-01-09 21:37 ` Aurelien Jarno
2014-01-09 12:37 ` Alex Smith
2014-01-09 12:37 ` Alex Smith
2014-01-08 2:44 ` [PATCH V16 05/12] MIPS: Loongson 3: Add HT-linked PCI support Huacai Chen
2014-01-08 22:58 ` Aurelien Jarno
[not found] ` <CAAhV-H57tDmYByjVwhf3teFZkGowR4E9+OO1vO0kP3iAKTNJVw@mail.gmail.com>
2014-01-09 21:38 ` Aurelien Jarno
2014-01-08 2:44 ` [PATCH V16 06/12] MIPS: Loongson 3: Add IRQ init and dispatch support Huacai Chen
2014-01-08 22:58 ` Aurelien Jarno
2014-01-09 12:52 ` Alex Smith
2014-01-09 12:52 ` Alex Smith
2014-01-08 2:44 ` [PATCH V16 07/12] MIPS: Loongson 3: Add serial port support Huacai Chen
2014-01-08 22:58 ` Aurelien Jarno
2014-01-08 2:44 ` [PATCH V16 08/12] MIPS: Loongson: Add swiotlb to support big memory (>4GB) Huacai Chen
2014-01-08 22:58 ` Aurelien Jarno
[not found] ` <CAAhV-H4h43N2OR4znwVv3miVbGkWJLapdgr9Jou1j4R8-9TRyA@mail.gmail.com>
2014-01-09 22:08 ` Aurelien Jarno
[not found] ` <CAAhV-H7WFdt-4jYG5qPV36UWJQnSfkSa2J-3CAs2+QLqwHVhuA@mail.gmail.com>
2014-01-11 15:24 ` Aurelien Jarno
2014-01-09 12:56 ` Alex Smith [this message]
2014-01-09 12:56 ` Alex Smith
[not found] ` <CAAhV-H7ZO0gNzQ5wQ-yD=NiP2AJrc3-bWLXHo-HDngf27c9+gQ@mail.gmail.com>
2014-01-11 15:25 ` Aurelien Jarno
2014-01-12 9:12 ` Huacai Chen
2014-01-12 9:57 ` Aurelien Jarno
2014-01-08 2:44 ` [PATCH V16 09/12] MIPS: Loongson: Add Loongson-3 Kconfig options Huacai Chen
2014-01-09 13:07 ` Alex Smith
2014-01-09 13:07 ` Alex Smith
2014-01-11 15:24 ` Aurelien Jarno
2014-01-13 3:02 ` Huacai Chen
2014-01-13 4:30 ` Aurelien Jarno
2014-01-13 10:15 ` Huacai Chen
2014-01-13 10:38 ` Aurelien Jarno
2014-01-13 12:15 ` Huacai Chen
2014-01-08 2:44 ` [PATCH V16 10/12] MIPS: Loongson 3: Add Loongson-3 SMP support Huacai Chen
2014-01-09 13:19 ` Alex Smith
2014-01-09 13:19 ` Alex Smith
2014-01-08 2:44 ` [PATCH V16 11/12] MIPS: Loongson 3: Add CPU hotplug support Huacai Chen
2014-01-11 15:24 ` Aurelien Jarno
2014-01-08 2:44 ` [PATCH V16 12/12] MIPS: Loongson: Add a Loongson-3 default config file Huacai Chen
2014-01-08 7:26 ` [PATCH V16 00/12] MIPS: Add Loongson-3 based machines support John Crispin
2014-01-18 9:38 ` Andreas Barth
[not found] ` <0466fa9d60b91233d2157d5ce0b51333.squirrel@mail.lemote.com>
2014-02-06 23:27 ` Andreas Barth
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52CE9C92.9080400@imgtec.com \
--to=alex.smith@imgtec.com \
--cc=Steven.Hill@imgtec.com \
--cc=aurelien@aurel32.net \
--cc=chenhc@lemote.com \
--cc=john@phrozen.org \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
--cc=taohl@lemote.com \
--cc=wuzhangjin@gmail.com \
--cc=yanh@lemote.com \
--cc=zhangfx@lemote.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox