[PATCH 3.14 003/228] MIPS/loongson2_cpufreq: Fix CPU clock rate setting

[PATCH 3.14 003/228] MIPS/loongson2_cpufreq: Fix CPU clock rate setting

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Aaro Koskinen <aaro.koskinen@iki.fi>

commit 8e8acb32960f42c81b1d50deac56a2c07bb6a18a upstream.

Loongson2 has been using (incorrectly) kHz for cpu_clk rate. This has
been unnoticed, as loongson2_cpufreq was the only place where the rate
was set/get. After commit 652ed95d5fa6074b3c4ea245deb0691f1acb6656
(cpufreq: introduce cpufreq_generic_get() routine) things however broke,
and now loops_per_jiffy adjustments are incorrect (1000 times too long).
The patch fixes this by changing cpu_clk rate to Hz.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: cpufreq@vger.kernel.org
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Patchwork: https://patchwork.linux-mips.org/patch/6678/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/loongson/lemote-2f/clock.c |    5 +++--
 drivers/cpufreq/loongson2_cpufreq.c  |    4 ++--
 2 files changed, 5 insertions(+), 4 deletions(-)

--- a/arch/mips/loongson/lemote-2f/clock.c
+++ b/arch/mips/loongson/lemote-2f/clock.c
@@ -91,6 +91,7 @@ EXPORT_SYMBOL(clk_put);
 
 int clk_set_rate(struct clk *clk, unsigned long rate)
 {
+	unsigned int rate_khz = rate / 1000;
 	int ret = 0;
 	int regval;
 	int i;
@@ -111,10 +112,10 @@ int clk_set_rate(struct clk *clk, unsign
 		if (loongson2_clockmod_table[i].frequency ==
 		    CPUFREQ_ENTRY_INVALID)
 			continue;
-		if (rate == loongson2_clockmod_table[i].frequency)
+		if (rate_khz == loongson2_clockmod_table[i].frequency)
 			break;
 	}
-	if (rate != loongson2_clockmod_table[i].frequency)
+	if (rate_khz != loongson2_clockmod_table[i].frequency)
 		return -ENOTSUPP;
 
 	clk->rate = rate;
--- a/drivers/cpufreq/loongson2_cpufreq.c
+++ b/drivers/cpufreq/loongson2_cpufreq.c
@@ -62,7 +62,7 @@ static int loongson2_cpufreq_target(stru
 	set_cpus_allowed_ptr(current, &cpus_allowed);
 
 	/* setting the cpu frequency */
-	clk_set_rate(policy->clk, freq);
+	clk_set_rate(policy->clk, freq * 1000);
 
 	return 0;
 }
@@ -92,7 +92,7 @@ static int loongson2_cpufreq_cpu_init(st
 	     i++)
 		loongson2_clockmod_table[i].frequency = (rate * i) / 8;
 
-	ret = clk_set_rate(cpuclk, rate);
+	ret = clk_set_rate(cpuclk, rate * 1000);
 	if (ret) {
 		clk_put(cpuclk);
 		return ret;

[PATCH 3.14 004/228] mips: dts: Fix missing device_type="memory" property in memory nodes

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Leif Lindholm <leif.lindholm@linaro.org>

commit dfc44f8030653b345fc6fb337558c3a07536823f upstream.

A few platforms lack a 'device_type = "memory"' for their memory
nodes, relying on an old ppc quirk in order to discover its memory.
Add the missing data so that all parsing code can find memory nodes
correctly.

Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/lantiq/dts/easy50712.dts    |    1 +
 arch/mips/ralink/dts/mt7620a_eval.dts |    1 +
 arch/mips/ralink/dts/rt2880_eval.dts  |    1 +
 arch/mips/ralink/dts/rt3052_eval.dts  |    1 +
 arch/mips/ralink/dts/rt3883_eval.dts  |    1 +
 5 files changed, 5 insertions(+)

--- a/arch/mips/lantiq/dts/easy50712.dts
+++ b/arch/mips/lantiq/dts/easy50712.dts
@@ -8,6 +8,7 @@
 	};
 
 	memory@0 {
+		device_type = "memory";
 		reg = <0x0 0x2000000>;
 	};
 
--- a/arch/mips/ralink/dts/mt7620a_eval.dts
+++ b/arch/mips/ralink/dts/mt7620a_eval.dts
@@ -7,6 +7,7 @@
 	model = "Ralink MT7620A evaluation board";
 
 	memory@0 {
+		device_type = "memory";
 		reg = <0x0 0x2000000>;
 	};
 
--- a/arch/mips/ralink/dts/rt2880_eval.dts
+++ b/arch/mips/ralink/dts/rt2880_eval.dts
@@ -7,6 +7,7 @@
 	model = "Ralink RT2880 evaluation board";
 
 	memory@0 {
+		device_type = "memory";
 		reg = <0x8000000 0x2000000>;
 	};
 
--- a/arch/mips/ralink/dts/rt3052_eval.dts
+++ b/arch/mips/ralink/dts/rt3052_eval.dts
@@ -7,6 +7,7 @@
 	model = "Ralink RT3052 evaluation board";
 
 	memory@0 {
+		device_type = "memory";
 		reg = <0x0 0x2000000>;
 	};
 
--- a/arch/mips/ralink/dts/rt3883_eval.dts
+++ b/arch/mips/ralink/dts/rt3883_eval.dts
@@ -7,6 +7,7 @@
 	model = "Ralink RT3883 evaluation board";
 
 	memory@0 {
+		device_type = "memory";
 		reg = <0x0 0x2000000>;
 	};