From: Andreas Herrmann <andreas.herrmann@caviumnetworks.com>
To: David Daney <ddaney.cavm@gmail.com>
Cc: James Cowgill <James.Cowgill@imgtec.com>,
<linux-mips@linux-mips.org>, Ralf Baechle <ralf@linux-mips.org>,
Aaro Koskinen <aaro.koskinen@iki.fi>,
David Daney <david.daney@cavium.com>,
Markos Chandras <markos.chandras@imgtec.com>
Subject: Re: [PATCH] MIPS: octeon: Add support for the UBNT E200 board
Date: Mon, 24 Nov 2014 19:54:54 +0100 [thread overview]
Message-ID: <20141124185454.GA12164@alberich> (raw)
In-Reply-To: <54736A06.9070206@gmail.com>
On Mon, Nov 24, 2014 at 09:25:26AM -0800, David Daney wrote:
> On 11/24/2014 05:51 AM, James Cowgill wrote:
> >From: Markos Chandras <markos.chandras@imgtec.com>
> >
> >Add support for the UBNT E200 board (EdgeRouter/EdgeRouter Pro 8 port).
> >
> >Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
> >Signed-off-by: James Cowgill <James.Cowgill@imgtec.com>
>
> NACK.
>
> As far as I know, these boards have a boot loader that supplies a
> correct device tree, there should be no need to hack up the kernel
> like this.
>
> As far as I know, Andreas is running a kernel.org kernel on these
> boards without anything like this.
>
> Andreas, can you confirm this?
Yes, a device tree is supported and most stuff works with mainline and
the USB patches posted recently.
Andreas
> Thanks,
> David Daney
>
> >---
> > arch/mips/cavium-octeon/executive/cvmx-helper-board.c | 3 +++
> > arch/mips/include/asm/octeon/cvmx-bootinfo.h | 2 ++
> > 2 files changed, 5 insertions(+)
> >
> >diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
> >index 5dfef84..69ba6fb 100644
> >--- a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
> >+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
> >@@ -186,6 +186,8 @@ int cvmx_helper_board_get_mii_address(int ipd_port)
> > return 7 - ipd_port;
> > else
> > return -1;
> >+ case CVMX_BOARD_TYPE_UBNT_E200:
> >+ return -1;
> > case CVMX_BOARD_TYPE_CUST_DSR1000N:
> > /*
> > * Port 2 connects to Broadcom PHY (B5081). Other ports (0-1)
> >@@ -759,6 +761,7 @@ enum cvmx_helper_board_usb_clock_types __cvmx_helper_board_usb_get_clock_type(vo
> > case CVMX_BOARD_TYPE_LANAI2_G:
> > case CVMX_BOARD_TYPE_NIC10E_66:
> > case CVMX_BOARD_TYPE_UBNT_E100:
> >+ case CVMX_BOARD_TYPE_UBNT_E200:
> > case CVMX_BOARD_TYPE_CUST_DSR1000N:
> > return USB_CLOCK_TYPE_CRYSTAL_12;
> > case CVMX_BOARD_TYPE_NIC10E:
> >diff --git a/arch/mips/include/asm/octeon/cvmx-bootinfo.h b/arch/mips/include/asm/octeon/cvmx-bootinfo.h
> >index 2298199..0567847 100644
> >--- a/arch/mips/include/asm/octeon/cvmx-bootinfo.h
> >+++ b/arch/mips/include/asm/octeon/cvmx-bootinfo.h
> >@@ -228,6 +228,7 @@ enum cvmx_board_types_enum {
> > */
> > CVMX_BOARD_TYPE_CUST_PRIVATE_MIN = 20001,
> > CVMX_BOARD_TYPE_UBNT_E100 = 20002,
> >+ CVMX_BOARD_TYPE_UBNT_E200 = 20003,
> > CVMX_BOARD_TYPE_CUST_DSR1000N = 20006,
> > CVMX_BOARD_TYPE_CUST_PRIVATE_MAX = 30000,
> >
> >@@ -328,6 +329,7 @@ static inline const char *cvmx_board_type_to_string(enum
> > /* Customer private range */
> > ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_PRIVATE_MIN)
> > ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E100)
> >+ ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E200)
> > ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_DSR1000N)
> > ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_PRIVATE_MAX)
> > }
> >
>
WARNING: multiple messages have this Message-ID (diff)
From: Andreas Herrmann <andreas.herrmann@caviumnetworks.com>
To: David Daney <ddaney.cavm@gmail.com>
Cc: James Cowgill <James.Cowgill@imgtec.com>,
linux-mips@linux-mips.org, Ralf Baechle <ralf@linux-mips.org>,
Aaro Koskinen <aaro.koskinen@iki.fi>,
David Daney <david.daney@cavium.com>,
Markos Chandras <markos.chandras@imgtec.com>
Subject: Re: [PATCH] MIPS: octeon: Add support for the UBNT E200 board
Date: Mon, 24 Nov 2014 19:54:54 +0100 [thread overview]
Message-ID: <20141124185454.GA12164@alberich> (raw)
Message-ID: <20141124185454.9wDRIOJdSkHCxjwl8zmoxAREMAL-8CJES2R4BcttAb4@z> (raw)
In-Reply-To: <54736A06.9070206@gmail.com>
On Mon, Nov 24, 2014 at 09:25:26AM -0800, David Daney wrote:
> On 11/24/2014 05:51 AM, James Cowgill wrote:
> >From: Markos Chandras <markos.chandras@imgtec.com>
> >
> >Add support for the UBNT E200 board (EdgeRouter/EdgeRouter Pro 8 port).
> >
> >Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
> >Signed-off-by: James Cowgill <James.Cowgill@imgtec.com>
>
> NACK.
>
> As far as I know, these boards have a boot loader that supplies a
> correct device tree, there should be no need to hack up the kernel
> like this.
>
> As far as I know, Andreas is running a kernel.org kernel on these
> boards without anything like this.
>
> Andreas, can you confirm this?
Yes, a device tree is supported and most stuff works with mainline and
the USB patches posted recently.
Andreas
> Thanks,
> David Daney
>
> >---
> > arch/mips/cavium-octeon/executive/cvmx-helper-board.c | 3 +++
> > arch/mips/include/asm/octeon/cvmx-bootinfo.h | 2 ++
> > 2 files changed, 5 insertions(+)
> >
> >diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
> >index 5dfef84..69ba6fb 100644
> >--- a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
> >+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
> >@@ -186,6 +186,8 @@ int cvmx_helper_board_get_mii_address(int ipd_port)
> > return 7 - ipd_port;
> > else
> > return -1;
> >+ case CVMX_BOARD_TYPE_UBNT_E200:
> >+ return -1;
> > case CVMX_BOARD_TYPE_CUST_DSR1000N:
> > /*
> > * Port 2 connects to Broadcom PHY (B5081). Other ports (0-1)
> >@@ -759,6 +761,7 @@ enum cvmx_helper_board_usb_clock_types __cvmx_helper_board_usb_get_clock_type(vo
> > case CVMX_BOARD_TYPE_LANAI2_G:
> > case CVMX_BOARD_TYPE_NIC10E_66:
> > case CVMX_BOARD_TYPE_UBNT_E100:
> >+ case CVMX_BOARD_TYPE_UBNT_E200:
> > case CVMX_BOARD_TYPE_CUST_DSR1000N:
> > return USB_CLOCK_TYPE_CRYSTAL_12;
> > case CVMX_BOARD_TYPE_NIC10E:
> >diff --git a/arch/mips/include/asm/octeon/cvmx-bootinfo.h b/arch/mips/include/asm/octeon/cvmx-bootinfo.h
> >index 2298199..0567847 100644
> >--- a/arch/mips/include/asm/octeon/cvmx-bootinfo.h
> >+++ b/arch/mips/include/asm/octeon/cvmx-bootinfo.h
> >@@ -228,6 +228,7 @@ enum cvmx_board_types_enum {
> > */
> > CVMX_BOARD_TYPE_CUST_PRIVATE_MIN = 20001,
> > CVMX_BOARD_TYPE_UBNT_E100 = 20002,
> >+ CVMX_BOARD_TYPE_UBNT_E200 = 20003,
> > CVMX_BOARD_TYPE_CUST_DSR1000N = 20006,
> > CVMX_BOARD_TYPE_CUST_PRIVATE_MAX = 30000,
> >
> >@@ -328,6 +329,7 @@ static inline const char *cvmx_board_type_to_string(enum
> > /* Customer private range */
> > ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_PRIVATE_MIN)
> > ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E100)
> >+ ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E200)
> > ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_DSR1000N)
> > ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_PRIVATE_MAX)
> > }
> >
>
next prev parent reply other threads:[~2014-11-24 18:55 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-24 13:51 [PATCH] MIPS: octeon: Add support for the UBNT E200 board James Cowgill
2014-11-24 13:51 ` James Cowgill
2014-11-24 17:25 ` David Daney
2014-11-24 17:37 ` James Cowgill
2014-11-24 18:54 ` Andreas Herrmann [this message]
2014-11-24 18:54 ` Andreas Herrmann
2014-11-24 19:13 ` Aaro Koskinen
2014-11-24 19:46 ` Aaro Koskinen
2014-11-24 19:53 ` David Daney
2014-11-25 11:58 ` James Cowgill
2014-11-25 12:09 ` Ralf Baechle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141124185454.GA12164@alberich \
--to=andreas.herrmann@caviumnetworks.com \
--cc=James.Cowgill@imgtec.com \
--cc=aaro.koskinen@iki.fi \
--cc=david.daney@cavium.com \
--cc=ddaney.cavm@gmail.com \
--cc=linux-mips@linux-mips.org \
--cc=markos.chandras@imgtec.com \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox