[PATCH 3.10 04/17] MIPS: IRQ: Fix disable_irq on CPU IRQs

[PATCH 3.10 04/17] MIPS: IRQ: Fix disable_irq on CPU IRQs

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Felix Fietkau <nbd@openwrt.org>

commit a3e6c1eff54878506b2dddcc202df9cc8180facb upstream.

If the irq_chip does not define .irq_disable, any call to disable_irq
will defer disabling the IRQ until it fires while marked as disabled.
This assumes that the handler function checks for this condition, which
handle_percpu_irq does not. In this case, calling disable_irq leads to
an IRQ storm, if the interrupt fires while disabled.

This optimization is only useful when disabling the IRQ is slow, which
is not true for the MIPS CPU IRQ.

Disable this optimization by implementing .irq_disable and .irq_enable

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8949/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/kernel/irq_cpu.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/arch/mips/kernel/irq_cpu.c
+++ b/arch/mips/kernel/irq_cpu.c
@@ -56,6 +56,8 @@ static struct irq_chip mips_cpu_irq_cont
 	.irq_mask_ack	= mask_mips_irq,
 	.irq_unmask	= unmask_mips_irq,
 	.irq_eoi	= unmask_mips_irq,
+	.irq_disable	= mask_mips_irq,
+	.irq_enable	= unmask_mips_irq,
 };
 
 /*
@@ -92,6 +94,8 @@ static struct irq_chip mips_mt_cpu_irq_c
 	.irq_mask_ack	= mips_mt_cpu_irq_ack,
 	.irq_unmask	= unmask_mips_irq,
 	.irq_eoi	= unmask_mips_irq,
+	.irq_disable	= mask_mips_irq,
+	.irq_enable	= unmask_mips_irq,
 };
 
 void __init mips_cpu_irq_init(void)

[PATCH 3.10 05/17] MIPS: Fix kernel lockup or crash after CPU offline/online

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hemmo Nieminen <hemmo.nieminen@iki.fi>

commit c7754e75100ed5e3068ac5085747f2bfc386c8d6 upstream.

As printk() invocation can cause e.g. a TLB miss, printk() cannot be
called before the exception handlers have been properly initialized.
This can happen e.g. when netconsole has been loaded as a kernel module
and the TLB table has been cleared when a CPU was offline.

Call cpu_report() in start_secondary() only after the exception handlers
have been initialized to fix this.

Without the patch the kernel will randomly either lockup or crash
after a CPU is onlined and the console driver is a module.

Signed-off-by: Hemmo Nieminen <hemmo.nieminen@iki.fi>
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8953/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/kernel/smp.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -109,10 +109,10 @@ asmlinkage __cpuinit void start_secondar
 	else
 #endif /* CONFIG_MIPS_MT_SMTC */
 	cpu_probe();
-	cpu_report();
 	per_cpu_trap_init(false);
 	mips_clockevent_init();
 	mp_ops->init_secondary();
+	cpu_report();
 
 	/*
 	 * XXX parity protection should be folded in here when it's converted