* [PATCH 4.0 035/220] MIPS: KVM: Handle MSA Disabled exceptions from guest
[not found] <20150502185854.333748961@linuxfoundation.org>
@ 2015-05-02 18:59 ` Greg Kroah-Hartman
2015-05-02 18:59 ` [PATCH 4.0 036/220] MIPS: lose_fpu(): Disable FPU when MSA enabled Greg Kroah-Hartman
` (7 subsequent siblings)
8 siblings, 0 replies; 9+ messages in thread
From: Greg Kroah-Hartman @ 2015-05-02 18:59 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, James Hogan, Paolo Bonzini,
Paul Burton, Ralf Baechle, Gleb Natapov, linux-mips, kvm
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: James Hogan <james.hogan@imgtec.com>
commit 98119ad53376885819d93dfb8737b6a9a61ca0ba upstream.
Guest user mode can generate a guest MSA Disabled exception on an MSA
capable core by simply trying to execute an MSA instruction. Since this
exception is unknown to KVM it will be passed on to the guest kernel.
However guest Linux kernels prior to v3.15 do not set up an exception
handler for the MSA Disabled exception as they don't support any MSA
capable cores. This results in a guest OS panic.
Since an older processor ID may be being emulated, and MSA support is
not advertised to the guest, the correct behaviour is to generate a
Reserved Instruction exception in the guest kernel so it can send the
guest process an illegal instruction signal (SIGILL), as would happen
with a non-MSA-capable core.
Fix this as minimally as reasonably possible by preventing
kvm_mips_check_privilege() from relaying MSA Disabled exceptions from
guest user mode to the guest kernel, and handling the MSA Disabled
exception by emulating a Reserved Instruction exception in the guest,
via a new handle_msa_disabled() KVM callback.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/mips/include/asm/kvm_host.h | 2 ++
arch/mips/kvm/emulate.c | 1 +
arch/mips/kvm/mips.c | 4 ++++
arch/mips/kvm/trap_emul.c | 28 ++++++++++++++++++++++++++++
4 files changed, 35 insertions(+)
--- a/arch/mips/include/asm/kvm_host.h
+++ b/arch/mips/include/asm/kvm_host.h
@@ -322,6 +322,7 @@ enum mips_mmu_types {
#define T_TRAP 13 /* Trap instruction */
#define T_VCEI 14 /* Virtual coherency exception */
#define T_FPE 15 /* Floating point exception */
+#define T_MSADIS 21 /* MSA disabled exception */
#define T_WATCH 23 /* Watch address reference */
#define T_VCED 31 /* Virtual coherency data */
@@ -578,6 +579,7 @@ struct kvm_mips_callbacks {
int (*handle_syscall)(struct kvm_vcpu *vcpu);
int (*handle_res_inst)(struct kvm_vcpu *vcpu);
int (*handle_break)(struct kvm_vcpu *vcpu);
+ int (*handle_msa_disabled)(struct kvm_vcpu *vcpu);
int (*vm_init)(struct kvm *kvm);
int (*vcpu_init)(struct kvm_vcpu *vcpu);
int (*vcpu_setup)(struct kvm_vcpu *vcpu);
--- a/arch/mips/kvm/emulate.c
+++ b/arch/mips/kvm/emulate.c
@@ -2176,6 +2176,7 @@ enum emulation_result kvm_mips_check_pri
case T_SYSCALL:
case T_BREAK:
case T_RES_INST:
+ case T_MSADIS:
break;
case T_COP_UNUSABLE:
--- a/arch/mips/kvm/mips.c
+++ b/arch/mips/kvm/mips.c
@@ -1119,6 +1119,10 @@ int kvm_mips_handle_exit(struct kvm_run
ret = kvm_mips_callbacks->handle_break(vcpu);
break;
+ case T_MSADIS:
+ ret = kvm_mips_callbacks->handle_msa_disabled(vcpu);
+ break;
+
default:
kvm_err("Exception Code: %d, not yet handled, @ PC: %p, inst: 0x%08x BadVaddr: %#lx Status: %#lx\n",
exccode, opc, kvm_get_inst(opc, vcpu), badvaddr,
--- a/arch/mips/kvm/trap_emul.c
+++ b/arch/mips/kvm/trap_emul.c
@@ -330,6 +330,33 @@ static int kvm_trap_emul_handle_break(st
return ret;
}
+static int kvm_trap_emul_handle_msa_disabled(struct kvm_vcpu *vcpu)
+{
+ struct kvm_run *run = vcpu->run;
+ uint32_t __user *opc = (uint32_t __user *) vcpu->arch.pc;
+ unsigned long cause = vcpu->arch.host_cp0_cause;
+ enum emulation_result er = EMULATE_DONE;
+ int ret = RESUME_GUEST;
+
+ /* No MSA supported in guest, guest reserved instruction exception */
+ er = kvm_mips_emulate_ri_exc(cause, opc, run, vcpu);
+
+ switch (er) {
+ case EMULATE_DONE:
+ ret = RESUME_GUEST;
+ break;
+
+ case EMULATE_FAIL:
+ run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
+ ret = RESUME_HOST;
+ break;
+
+ default:
+ BUG();
+ }
+ return ret;
+}
+
static int kvm_trap_emul_vm_init(struct kvm *kvm)
{
return 0;
@@ -470,6 +497,7 @@ static struct kvm_mips_callbacks kvm_tra
.handle_syscall = kvm_trap_emul_handle_syscall,
.handle_res_inst = kvm_trap_emul_handle_res_inst,
.handle_break = kvm_trap_emul_handle_break,
+ .handle_msa_disabled = kvm_trap_emul_handle_msa_disabled,
.vm_init = kvm_trap_emul_vm_init,
.vcpu_init = kvm_trap_emul_vcpu_init,
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 4.0 036/220] MIPS: lose_fpu(): Disable FPU when MSA enabled
[not found] <20150502185854.333748961@linuxfoundation.org>
2015-05-02 18:59 ` [PATCH 4.0 035/220] MIPS: KVM: Handle MSA Disabled exceptions from guest Greg Kroah-Hartman
@ 2015-05-02 18:59 ` Greg Kroah-Hartman
2015-05-02 18:59 ` [PATCH 4.0 037/220] MIPS: Malta: Detect and fix bad memsize values Greg Kroah-Hartman
` (6 subsequent siblings)
8 siblings, 0 replies; 9+ messages in thread
From: Greg Kroah-Hartman @ 2015-05-02 18:59 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, James Hogan, Ralf Baechle,
Paul Burton, linux-mips
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: James Hogan <james.hogan@imgtec.com>
commit acaf6a97d623af123314c2f8ce4cf7254f6b2fc1 upstream.
The lose_fpu() function only disables the FPU in CP0_Status.CU1 if the
FPU is in use and MSA isn't enabled.
This isn't necessarily a problem because KSTK_STATUS(current), the
version of CP0_Status stored on the kernel stack on entry from user
mode, does always get updated and gets restored when returning to user
mode, but I don't think it was intended, and it is inconsistent with the
case of only the FPU being in use. Sometimes leaving the FPU enabled may
also mask kernel bugs where FPU operations are executed when the FPU
might not be enabled.
So lets disable the FPU in the MSA case too.
Fixes: 33c771ba5c5d ("MIPS: save/disable MSA in lose_fpu")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9323/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/mips/include/asm/fpu.h | 1 +
1 file changed, 1 insertion(+)
--- a/arch/mips/include/asm/fpu.h
+++ b/arch/mips/include/asm/fpu.h
@@ -170,6 +170,7 @@ static inline void lose_fpu(int save)
}
disable_msa();
clear_thread_flag(TIF_USEDMSA);
+ __disable_fpu();
} else if (is_fpu_owner()) {
if (save)
_save_fp(current);
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 4.0 037/220] MIPS: Malta: Detect and fix bad memsize values
[not found] <20150502185854.333748961@linuxfoundation.org>
2015-05-02 18:59 ` [PATCH 4.0 035/220] MIPS: KVM: Handle MSA Disabled exceptions from guest Greg Kroah-Hartman
2015-05-02 18:59 ` [PATCH 4.0 036/220] MIPS: lose_fpu(): Disable FPU when MSA enabled Greg Kroah-Hartman
@ 2015-05-02 18:59 ` Greg Kroah-Hartman
2015-05-02 18:59 ` [PATCH 4.0 038/220] MIPS: asm: asm-eva: Introduce kernel load/store variants Greg Kroah-Hartman
` (5 subsequent siblings)
8 siblings, 0 replies; 9+ messages in thread
From: Greg Kroah-Hartman @ 2015-05-02 18:59 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Markos Chandras, linux-mips,
Ralf Baechle
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Markos Chandras <markos.chandras@imgtec.com>
commit f7f8aea4b97c4d48e42f02cb37026bee445f239f upstream.
memsize denotes the amount of RAM we can access from kseg{0,1} and
that should be up to 256M. In case the bootloader reports a value
higher than that (perhaps reporting all the available RAM) it's best
if we fix it ourselves and just warn the user about that. This is
usually a problem with the bootloader and/or its environment.
[ralf@linux-mips.org: Remove useless parens as suggested bei Sergei.
Reformat long pr_warn statement to fit into 80 column limit.]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9362/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/mips/mti-malta/malta-memory.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/arch/mips/mti-malta/malta-memory.c
+++ b/arch/mips/mti-malta/malta-memory.c
@@ -53,6 +53,12 @@ fw_memblock_t * __init fw_getmdesc(int e
pr_warn("memsize not set in YAMON, set to default (32Mb)\n");
physical_memsize = 0x02000000;
} else {
+ if (memsize > (256 << 20)) { /* memsize should be capped to 256M */
+ pr_warn("Unsupported memsize value (0x%lx) detected! "
+ "Using 0x10000000 (256M) instead\n",
+ memsize);
+ memsize = 256 << 20;
+ }
/* If ememsize is set, then set physical_memsize to that */
physical_memsize = ememsize ? : memsize;
}
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 4.0 038/220] MIPS: asm: asm-eva: Introduce kernel load/store variants
[not found] <20150502185854.333748961@linuxfoundation.org>
` (2 preceding siblings ...)
2015-05-02 18:59 ` [PATCH 4.0 037/220] MIPS: Malta: Detect and fix bad memsize values Greg Kroah-Hartman
@ 2015-05-02 18:59 ` Greg Kroah-Hartman
2015-05-02 18:59 ` [PATCH 4.0 039/220] MIPS: unaligned: Prevent EVA instructions on kernel unaligned accesses Greg Kroah-Hartman
` (4 subsequent siblings)
8 siblings, 0 replies; 9+ messages in thread
From: Greg Kroah-Hartman @ 2015-05-02 18:59 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Markos Chandras, linux-mips,
Ralf Baechle
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Markos Chandras <markos.chandras@imgtec.com>
commit 60cd7e08e453bc6828ac4b539f949e4acd80f143 upstream.
Introduce new macros for kernel load/store variants which will be
used to perform regular kernel space load/store operations in EVA
mode.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9500/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/mips/include/asm/asm-eva.h | 137 +++++++++++++++++++++++++++-------------
1 file changed, 93 insertions(+), 44 deletions(-)
--- a/arch/mips/include/asm/asm-eva.h
+++ b/arch/mips/include/asm/asm-eva.h
@@ -11,6 +11,36 @@
#define __ASM_ASM_EVA_H
#ifndef __ASSEMBLY__
+
+/* Kernel variants */
+
+#define kernel_cache(op, base) "cache " op ", " base "\n"
+#define kernel_ll(reg, addr) "ll " reg ", " addr "\n"
+#define kernel_sc(reg, addr) "sc " reg ", " addr "\n"
+#define kernel_lw(reg, addr) "lw " reg ", " addr "\n"
+#define kernel_lwl(reg, addr) "lwl " reg ", " addr "\n"
+#define kernel_lwr(reg, addr) "lwr " reg ", " addr "\n"
+#define kernel_lh(reg, addr) "lh " reg ", " addr "\n"
+#define kernel_lb(reg, addr) "lb " reg ", " addr "\n"
+#define kernel_lbu(reg, addr) "lbu " reg ", " addr "\n"
+#define kernel_sw(reg, addr) "sw " reg ", " addr "\n"
+#define kernel_swl(reg, addr) "swl " reg ", " addr "\n"
+#define kernel_swr(reg, addr) "swr " reg ", " addr "\n"
+#define kernel_sh(reg, addr) "sh " reg ", " addr "\n"
+#define kernel_sb(reg, addr) "sb " reg ", " addr "\n"
+
+#ifdef CONFIG_32BIT
+/*
+ * No 'sd' or 'ld' instructions in 32-bit but the code will
+ * do the correct thing
+ */
+#define kernel_sd(reg, addr) user_sw(reg, addr)
+#define kernel_ld(reg, addr) user_lw(reg, addr)
+#else
+#define kernel_sd(reg, addr) "sd " reg", " addr "\n"
+#define kernel_ld(reg, addr) "ld " reg", " addr "\n"
+#endif /* CONFIG_32BIT */
+
#ifdef CONFIG_EVA
#define __BUILD_EVA_INSN(insn, reg, addr) \
@@ -41,37 +71,60 @@
#else
-#define user_cache(op, base) "cache " op ", " base "\n"
-#define user_ll(reg, addr) "ll " reg ", " addr "\n"
-#define user_sc(reg, addr) "sc " reg ", " addr "\n"
-#define user_lw(reg, addr) "lw " reg ", " addr "\n"
-#define user_lwl(reg, addr) "lwl " reg ", " addr "\n"
-#define user_lwr(reg, addr) "lwr " reg ", " addr "\n"
-#define user_lh(reg, addr) "lh " reg ", " addr "\n"
-#define user_lb(reg, addr) "lb " reg ", " addr "\n"
-#define user_lbu(reg, addr) "lbu " reg ", " addr "\n"
-#define user_sw(reg, addr) "sw " reg ", " addr "\n"
-#define user_swl(reg, addr) "swl " reg ", " addr "\n"
-#define user_swr(reg, addr) "swr " reg ", " addr "\n"
-#define user_sh(reg, addr) "sh " reg ", " addr "\n"
-#define user_sb(reg, addr) "sb " reg ", " addr "\n"
+#define user_cache(op, base) kernel_cache(op, base)
+#define user_ll(reg, addr) kernel_ll(reg, addr)
+#define user_sc(reg, addr) kernel_sc(reg, addr)
+#define user_lw(reg, addr) kernel_lw(reg, addr)
+#define user_lwl(reg, addr) kernel_lwl(reg, addr)
+#define user_lwr(reg, addr) kernel_lwr(reg, addr)
+#define user_lh(reg, addr) kernel_lh(reg, addr)
+#define user_lb(reg, addr) kernel_lb(reg, addr)
+#define user_lbu(reg, addr) kernel_lbu(reg, addr)
+#define user_sw(reg, addr) kernel_sw(reg, addr)
+#define user_swl(reg, addr) kernel_swl(reg, addr)
+#define user_swr(reg, addr) kernel_swr(reg, addr)
+#define user_sh(reg, addr) kernel_sh(reg, addr)
+#define user_sb(reg, addr) kernel_sb(reg, addr)
#ifdef CONFIG_32BIT
-/*
- * No 'sd' or 'ld' instructions in 32-bit but the code will
- * do the correct thing
- */
-#define user_sd(reg, addr) user_sw(reg, addr)
-#define user_ld(reg, addr) user_lw(reg, addr)
+#define user_sd(reg, addr) kernel_sw(reg, addr)
+#define user_ld(reg, addr) kernel_lw(reg, addr)
#else
-#define user_sd(reg, addr) "sd " reg", " addr "\n"
-#define user_ld(reg, addr) "ld " reg", " addr "\n"
+#define user_sd(reg, addr) kernel_sd(reg, addr)
+#define user_ld(reg, addr) kernel_ld(reg, addr)
#endif /* CONFIG_32BIT */
#endif /* CONFIG_EVA */
#else /* __ASSEMBLY__ */
+#define kernel_cache(op, base) cache op, base
+#define kernel_ll(reg, addr) ll reg, addr
+#define kernel_sc(reg, addr) sc reg, addr
+#define kernel_lw(reg, addr) lw reg, addr
+#define kernel_lwl(reg, addr) lwl reg, addr
+#define kernel_lwr(reg, addr) lwr reg, addr
+#define kernel_lh(reg, addr) lh reg, addr
+#define kernel_lb(reg, addr) lb reg, addr
+#define kernel_lbu(reg, addr) lbu reg, addr
+#define kernel_sw(reg, addr) sw reg, addr
+#define kernel_swl(reg, addr) swl reg, addr
+#define kernel_swr(reg, addr) swr reg, addr
+#define kernel_sh(reg, addr) sh reg, addr
+#define kernel_sb(reg, addr) sb reg, addr
+
+#ifdef CONFIG_32BIT
+/*
+ * No 'sd' or 'ld' instructions in 32-bit but the code will
+ * do the correct thing
+ */
+#define kernel_sd(reg, addr) user_sw(reg, addr)
+#define kernel_ld(reg, addr) user_lw(reg, addr)
+#else
+#define kernel_sd(reg, addr) sd reg, addr
+#define kernel_ld(reg, addr) ld reg, addr
+#endif /* CONFIG_32BIT */
+
#ifdef CONFIG_EVA
#define __BUILD_EVA_INSN(insn, reg, addr) \
@@ -101,31 +154,27 @@
#define user_sd(reg, addr) user_sw(reg, addr)
#else
-#define user_cache(op, base) cache op, base
-#define user_ll(reg, addr) ll reg, addr
-#define user_sc(reg, addr) sc reg, addr
-#define user_lw(reg, addr) lw reg, addr
-#define user_lwl(reg, addr) lwl reg, addr
-#define user_lwr(reg, addr) lwr reg, addr
-#define user_lh(reg, addr) lh reg, addr
-#define user_lb(reg, addr) lb reg, addr
-#define user_lbu(reg, addr) lbu reg, addr
-#define user_sw(reg, addr) sw reg, addr
-#define user_swl(reg, addr) swl reg, addr
-#define user_swr(reg, addr) swr reg, addr
-#define user_sh(reg, addr) sh reg, addr
-#define user_sb(reg, addr) sb reg, addr
+#define user_cache(op, base) kernel_cache(op, base)
+#define user_ll(reg, addr) kernel_ll(reg, addr)
+#define user_sc(reg, addr) kernel_sc(reg, addr)
+#define user_lw(reg, addr) kernel_lw(reg, addr)
+#define user_lwl(reg, addr) kernel_lwl(reg, addr)
+#define user_lwr(reg, addr) kernel_lwr(reg, addr)
+#define user_lh(reg, addr) kernel_lh(reg, addr)
+#define user_lb(reg, addr) kernel_lb(reg, addr)
+#define user_lbu(reg, addr) kernel_lbu(reg, addr)
+#define user_sw(reg, addr) kernel_sw(reg, addr)
+#define user_swl(reg, addr) kernel_swl(reg, addr)
+#define user_swr(reg, addr) kernel_swr(reg, addr)
+#define user_sh(reg, addr) kernel_sh(reg, addr)
+#define user_sb(reg, addr) kernel_sb(reg, addr)
#ifdef CONFIG_32BIT
-/*
- * No 'sd' or 'ld' instructions in 32-bit but the code will
- * do the correct thing
- */
-#define user_sd(reg, addr) user_sw(reg, addr)
-#define user_ld(reg, addr) user_lw(reg, addr)
+#define user_sd(reg, addr) kernel_sw(reg, addr)
+#define user_ld(reg, addr) kernel_lw(reg, addr)
#else
-#define user_sd(reg, addr) sd reg, addr
-#define user_ld(reg, addr) ld reg, addr
+#define user_sd(reg, addr) kernel_sd(reg, addr)
+#define user_ld(reg, addr) kernel_sd(reg, addr)
#endif /* CONFIG_32BIT */
#endif /* CONFIG_EVA */
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 4.0 039/220] MIPS: unaligned: Prevent EVA instructions on kernel unaligned accesses
[not found] <20150502185854.333748961@linuxfoundation.org>
` (3 preceding siblings ...)
2015-05-02 18:59 ` [PATCH 4.0 038/220] MIPS: asm: asm-eva: Introduce kernel load/store variants Greg Kroah-Hartman
@ 2015-05-02 18:59 ` Greg Kroah-Hartman
2015-05-02 18:59 ` [PATCH 4.0 040/220] MIPS: unaligned: Surround load/store macros in do {} while statements Greg Kroah-Hartman
` (3 subsequent siblings)
8 siblings, 0 replies; 9+ messages in thread
From: Greg Kroah-Hartman @ 2015-05-02 18:59 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Markos Chandras, linux-mips,
Ralf Baechle
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Markos Chandras <markos.chandras@imgtec.com>
commit eeb538950367e3966cbf0237ab1a1dc30e059818 upstream.
Commit c1771216ab48 ("MIPS: kernel: unaligned: Handle unaligned
accesses for EVA") allowed unaligned accesses to be emulated for
EVA. However, when emulating regular load/store unaligned accesses,
we need to use the appropriate "address space" instructions for that.
Previously, an unaligned load/store instruction in kernel space would
have used the corresponding EVA instructions to emulate it which led to
segmentation faults because of the address translation that happens
with EVA instructions. This is now fixed by using the EVA instruction
only when emulating EVA unaligned accesses.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Fixes: c1771216ab48 ("MIPS: kernel: unaligned: Handle unaligned accesses for EVA")
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9501/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/mips/kernel/unaligned.c | 172 +++++++++++++++++++++++--------------------
1 file changed, 94 insertions(+), 78 deletions(-)
--- a/arch/mips/kernel/unaligned.c
+++ b/arch/mips/kernel/unaligned.c
@@ -109,10 +109,10 @@ static u32 unaligned_action;
extern void show_registers(struct pt_regs *regs);
#ifdef __BIG_ENDIAN
-#define LoadHW(addr, value, res) \
+#define _LoadHW(addr, value, res, type) \
__asm__ __volatile__ (".set\tnoat\n" \
- "1:\t"user_lb("%0", "0(%2)")"\n" \
- "2:\t"user_lbu("$1", "1(%2)")"\n\t" \
+ "1:\t"type##_lb("%0", "0(%2)")"\n" \
+ "2:\t"type##_lbu("$1", "1(%2)")"\n\t"\
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"li\t%1, 0\n" \
@@ -130,10 +130,10 @@ extern void show_registers(struct pt_reg
: "r" (addr), "i" (-EFAULT));
#ifndef CONFIG_CPU_MIPSR6
-#define LoadW(addr, value, res) \
+#define _LoadW(addr, value, res, type) \
__asm__ __volatile__ ( \
- "1:\t"user_lwl("%0", "(%2)")"\n" \
- "2:\t"user_lwr("%0", "3(%2)")"\n\t" \
+ "1:\t"type##_lwl("%0", "(%2)")"\n" \
+ "2:\t"type##_lwr("%0", "3(%2)")"\n\t"\
"li\t%1, 0\n" \
"3:\n\t" \
".insn\n\t" \
@@ -149,18 +149,18 @@ extern void show_registers(struct pt_reg
: "r" (addr), "i" (-EFAULT));
#else
/* MIPSR6 has no lwl instruction */
-#define LoadW(addr, value, res) \
+#define _LoadW(addr, value, res, type) \
__asm__ __volatile__ ( \
".set\tpush\n" \
".set\tnoat\n\t" \
- "1:"user_lb("%0", "0(%2)")"\n\t" \
- "2:"user_lbu("$1", "1(%2)")"\n\t" \
+ "1:"type##_lb("%0", "0(%2)")"\n\t" \
+ "2:"type##_lbu("$1", "1(%2)")"\n\t" \
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
- "3:"user_lbu("$1", "2(%2)")"\n\t" \
+ "3:"type##_lbu("$1", "2(%2)")"\n\t" \
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
- "4:"user_lbu("$1", "3(%2)")"\n\t" \
+ "4:"type##_lbu("$1", "3(%2)")"\n\t" \
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"li\t%1, 0\n" \
@@ -181,11 +181,11 @@ extern void show_registers(struct pt_reg
: "r" (addr), "i" (-EFAULT));
#endif /* CONFIG_CPU_MIPSR6 */
-#define LoadHWU(addr, value, res) \
+#define _LoadHWU(addr, value, res, type) \
__asm__ __volatile__ ( \
".set\tnoat\n" \
- "1:\t"user_lbu("%0", "0(%2)")"\n" \
- "2:\t"user_lbu("$1", "1(%2)")"\n\t" \
+ "1:\t"type##_lbu("%0", "0(%2)")"\n" \
+ "2:\t"type##_lbu("$1", "1(%2)")"\n\t"\
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"li\t%1, 0\n" \
@@ -204,10 +204,10 @@ extern void show_registers(struct pt_reg
: "r" (addr), "i" (-EFAULT));
#ifndef CONFIG_CPU_MIPSR6
-#define LoadWU(addr, value, res) \
+#define _LoadWU(addr, value, res, type) \
__asm__ __volatile__ ( \
- "1:\t"user_lwl("%0", "(%2)")"\n" \
- "2:\t"user_lwr("%0", "3(%2)")"\n\t" \
+ "1:\t"type##_lwl("%0", "(%2)")"\n" \
+ "2:\t"type##_lwr("%0", "3(%2)")"\n\t"\
"dsll\t%0, %0, 32\n\t" \
"dsrl\t%0, %0, 32\n\t" \
"li\t%1, 0\n" \
@@ -224,7 +224,7 @@ extern void show_registers(struct pt_reg
: "=&r" (value), "=r" (res) \
: "r" (addr), "i" (-EFAULT));
-#define LoadDW(addr, value, res) \
+#define _LoadDW(addr, value, res) \
__asm__ __volatile__ ( \
"1:\tldl\t%0, (%2)\n" \
"2:\tldr\t%0, 7(%2)\n\t" \
@@ -243,18 +243,18 @@ extern void show_registers(struct pt_reg
: "r" (addr), "i" (-EFAULT));
#else
/* MIPSR6 has not lwl and ldl instructions */
-#define LoadWU(addr, value, res) \
+#define _LoadWU(addr, value, res, type) \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
- "1:"user_lbu("%0", "0(%2)")"\n\t" \
- "2:"user_lbu("$1", "1(%2)")"\n\t" \
+ "1:"type##_lbu("%0", "0(%2)")"\n\t" \
+ "2:"type##_lbu("$1", "1(%2)")"\n\t" \
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
- "3:"user_lbu("$1", "2(%2)")"\n\t" \
+ "3:"type##_lbu("$1", "2(%2)")"\n\t" \
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
- "4:"user_lbu("$1", "3(%2)")"\n\t" \
+ "4:"type##_lbu("$1", "3(%2)")"\n\t" \
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"li\t%1, 0\n" \
@@ -274,7 +274,7 @@ extern void show_registers(struct pt_reg
: "=&r" (value), "=r" (res) \
: "r" (addr), "i" (-EFAULT));
-#define LoadDW(addr, value, res) \
+#define _LoadDW(addr, value, res) \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
@@ -323,12 +323,12 @@ extern void show_registers(struct pt_reg
#endif /* CONFIG_CPU_MIPSR6 */
-#define StoreHW(addr, value, res) \
+#define _StoreHW(addr, value, res, type) \
__asm__ __volatile__ ( \
".set\tnoat\n" \
- "1:\t"user_sb("%1", "1(%2)")"\n" \
+ "1:\t"type##_sb("%1", "1(%2)")"\n" \
"srl\t$1, %1, 0x8\n" \
- "2:\t"user_sb("$1", "0(%2)")"\n" \
+ "2:\t"type##_sb("$1", "0(%2)")"\n" \
".set\tat\n\t" \
"li\t%0, 0\n" \
"3:\n\t" \
@@ -345,10 +345,10 @@ extern void show_registers(struct pt_reg
: "r" (value), "r" (addr), "i" (-EFAULT));
#ifndef CONFIG_CPU_MIPSR6
-#define StoreW(addr, value, res) \
+#define _StoreW(addr, value, res, type) \
__asm__ __volatile__ ( \
- "1:\t"user_swl("%1", "(%2)")"\n" \
- "2:\t"user_swr("%1", "3(%2)")"\n\t" \
+ "1:\t"type##_swl("%1", "(%2)")"\n" \
+ "2:\t"type##_swr("%1", "3(%2)")"\n\t"\
"li\t%0, 0\n" \
"3:\n\t" \
".insn\n\t" \
@@ -363,7 +363,7 @@ extern void show_registers(struct pt_reg
: "=r" (res) \
: "r" (value), "r" (addr), "i" (-EFAULT));
-#define StoreDW(addr, value, res) \
+#define _StoreDW(addr, value, res) \
__asm__ __volatile__ ( \
"1:\tsdl\t%1,(%2)\n" \
"2:\tsdr\t%1, 7(%2)\n\t" \
@@ -382,17 +382,17 @@ extern void show_registers(struct pt_reg
: "r" (value), "r" (addr), "i" (-EFAULT));
#else
/* MIPSR6 has no swl and sdl instructions */
-#define StoreW(addr, value, res) \
+#define _StoreW(addr, value, res, type) \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
- "1:"user_sb("%1", "3(%2)")"\n\t" \
+ "1:"type##_sb("%1", "3(%2)")"\n\t" \
"srl\t$1, %1, 0x8\n\t" \
- "2:"user_sb("$1", "2(%2)")"\n\t" \
+ "2:"type##_sb("$1", "2(%2)")"\n\t" \
"srl\t$1, $1, 0x8\n\t" \
- "3:"user_sb("$1", "1(%2)")"\n\t" \
+ "3:"type##_sb("$1", "1(%2)")"\n\t" \
"srl\t$1, $1, 0x8\n\t" \
- "4:"user_sb("$1", "0(%2)")"\n\t" \
+ "4:"type##_sb("$1", "0(%2)")"\n\t" \
".set\tpop\n\t" \
"li\t%0, 0\n" \
"10:\n\t" \
@@ -456,10 +456,10 @@ extern void show_registers(struct pt_reg
#else /* __BIG_ENDIAN */
-#define LoadHW(addr, value, res) \
+#define _LoadHW(addr, value, res, type) \
__asm__ __volatile__ (".set\tnoat\n" \
- "1:\t"user_lb("%0", "1(%2)")"\n" \
- "2:\t"user_lbu("$1", "0(%2)")"\n\t" \
+ "1:\t"type##_lb("%0", "1(%2)")"\n" \
+ "2:\t"type##_lbu("$1", "0(%2)")"\n\t"\
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"li\t%1, 0\n" \
@@ -477,10 +477,10 @@ extern void show_registers(struct pt_reg
: "r" (addr), "i" (-EFAULT));
#ifndef CONFIG_CPU_MIPSR6
-#define LoadW(addr, value, res) \
+#define _LoadW(addr, value, res, type) \
__asm__ __volatile__ ( \
- "1:\t"user_lwl("%0", "3(%2)")"\n" \
- "2:\t"user_lwr("%0", "(%2)")"\n\t" \
+ "1:\t"type##_lwl("%0", "3(%2)")"\n" \
+ "2:\t"type##_lwr("%0", "(%2)")"\n\t"\
"li\t%1, 0\n" \
"3:\n\t" \
".insn\n\t" \
@@ -496,18 +496,18 @@ extern void show_registers(struct pt_reg
: "r" (addr), "i" (-EFAULT));
#else
/* MIPSR6 has no lwl instruction */
-#define LoadW(addr, value, res) \
+#define _LoadW(addr, value, res, type) \
__asm__ __volatile__ ( \
".set\tpush\n" \
".set\tnoat\n\t" \
- "1:"user_lb("%0", "3(%2)")"\n\t" \
- "2:"user_lbu("$1", "2(%2)")"\n\t" \
+ "1:"type##_lb("%0", "3(%2)")"\n\t" \
+ "2:"type##_lbu("$1", "2(%2)")"\n\t" \
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
- "3:"user_lbu("$1", "1(%2)")"\n\t" \
+ "3:"type##_lbu("$1", "1(%2)")"\n\t" \
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
- "4:"user_lbu("$1", "0(%2)")"\n\t" \
+ "4:"type##_lbu("$1", "0(%2)")"\n\t" \
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"li\t%1, 0\n" \
@@ -529,11 +529,11 @@ extern void show_registers(struct pt_reg
#endif /* CONFIG_CPU_MIPSR6 */
-#define LoadHWU(addr, value, res) \
+#define _LoadHWU(addr, value, res, type) \
__asm__ __volatile__ ( \
".set\tnoat\n" \
- "1:\t"user_lbu("%0", "1(%2)")"\n" \
- "2:\t"user_lbu("$1", "0(%2)")"\n\t" \
+ "1:\t"type##_lbu("%0", "1(%2)")"\n" \
+ "2:\t"type##_lbu("$1", "0(%2)")"\n\t"\
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"li\t%1, 0\n" \
@@ -552,10 +552,10 @@ extern void show_registers(struct pt_reg
: "r" (addr), "i" (-EFAULT));
#ifndef CONFIG_CPU_MIPSR6
-#define LoadWU(addr, value, res) \
+#define _LoadWU(addr, value, res, type) \
__asm__ __volatile__ ( \
- "1:\t"user_lwl("%0", "3(%2)")"\n" \
- "2:\t"user_lwr("%0", "(%2)")"\n\t" \
+ "1:\t"type##_lwl("%0", "3(%2)")"\n" \
+ "2:\t"type##_lwr("%0", "(%2)")"\n\t"\
"dsll\t%0, %0, 32\n\t" \
"dsrl\t%0, %0, 32\n\t" \
"li\t%1, 0\n" \
@@ -572,7 +572,7 @@ extern void show_registers(struct pt_reg
: "=&r" (value), "=r" (res) \
: "r" (addr), "i" (-EFAULT));
-#define LoadDW(addr, value, res) \
+#define _LoadDW(addr, value, res) \
__asm__ __volatile__ ( \
"1:\tldl\t%0, 7(%2)\n" \
"2:\tldr\t%0, (%2)\n\t" \
@@ -591,18 +591,18 @@ extern void show_registers(struct pt_reg
: "r" (addr), "i" (-EFAULT));
#else
/* MIPSR6 has not lwl and ldl instructions */
-#define LoadWU(addr, value, res) \
+#define _LoadWU(addr, value, res, type) \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
- "1:"user_lbu("%0", "3(%2)")"\n\t" \
- "2:"user_lbu("$1", "2(%2)")"\n\t" \
+ "1:"type##_lbu("%0", "3(%2)")"\n\t" \
+ "2:"type##_lbu("$1", "2(%2)")"\n\t" \
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
- "3:"user_lbu("$1", "1(%2)")"\n\t" \
+ "3:"type##_lbu("$1", "1(%2)")"\n\t" \
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
- "4:"user_lbu("$1", "0(%2)")"\n\t" \
+ "4:"type##_lbu("$1", "0(%2)")"\n\t" \
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"li\t%1, 0\n" \
@@ -622,7 +622,7 @@ extern void show_registers(struct pt_reg
: "=&r" (value), "=r" (res) \
: "r" (addr), "i" (-EFAULT));
-#define LoadDW(addr, value, res) \
+#define _LoadDW(addr, value, res) \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
@@ -670,12 +670,12 @@ extern void show_registers(struct pt_reg
: "r" (addr), "i" (-EFAULT));
#endif /* CONFIG_CPU_MIPSR6 */
-#define StoreHW(addr, value, res) \
+#define _StoreHW(addr, value, res, type) \
__asm__ __volatile__ ( \
".set\tnoat\n" \
- "1:\t"user_sb("%1", "0(%2)")"\n" \
+ "1:\t"type##_sb("%1", "0(%2)")"\n" \
"srl\t$1,%1, 0x8\n" \
- "2:\t"user_sb("$1", "1(%2)")"\n" \
+ "2:\t"type##_sb("$1", "1(%2)")"\n" \
".set\tat\n\t" \
"li\t%0, 0\n" \
"3:\n\t" \
@@ -691,10 +691,10 @@ extern void show_registers(struct pt_reg
: "=r" (res) \
: "r" (value), "r" (addr), "i" (-EFAULT));
#ifndef CONFIG_CPU_MIPSR6
-#define StoreW(addr, value, res) \
+#define _StoreW(addr, value, res, type) \
__asm__ __volatile__ ( \
- "1:\t"user_swl("%1", "3(%2)")"\n" \
- "2:\t"user_swr("%1", "(%2)")"\n\t" \
+ "1:\t"type##_swl("%1", "3(%2)")"\n" \
+ "2:\t"type##_swr("%1", "(%2)")"\n\t"\
"li\t%0, 0\n" \
"3:\n\t" \
".insn\n\t" \
@@ -709,7 +709,7 @@ extern void show_registers(struct pt_reg
: "=r" (res) \
: "r" (value), "r" (addr), "i" (-EFAULT));
-#define StoreDW(addr, value, res) \
+#define _StoreDW(addr, value, res) \
__asm__ __volatile__ ( \
"1:\tsdl\t%1, 7(%2)\n" \
"2:\tsdr\t%1, (%2)\n\t" \
@@ -728,17 +728,17 @@ extern void show_registers(struct pt_reg
: "r" (value), "r" (addr), "i" (-EFAULT));
#else
/* MIPSR6 has no swl and sdl instructions */
-#define StoreW(addr, value, res) \
+#define _StoreW(addr, value, res, type) \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
- "1:"user_sb("%1", "0(%2)")"\n\t" \
+ "1:"type##_sb("%1", "0(%2)")"\n\t" \
"srl\t$1, %1, 0x8\n\t" \
- "2:"user_sb("$1", "1(%2)")"\n\t" \
+ "2:"type##_sb("$1", "1(%2)")"\n\t" \
"srl\t$1, $1, 0x8\n\t" \
- "3:"user_sb("$1", "2(%2)")"\n\t" \
+ "3:"type##_sb("$1", "2(%2)")"\n\t" \
"srl\t$1, $1, 0x8\n\t" \
- "4:"user_sb("$1", "3(%2)")"\n\t" \
+ "4:"type##_sb("$1", "3(%2)")"\n\t" \
".set\tpop\n\t" \
"li\t%0, 0\n" \
"10:\n\t" \
@@ -757,7 +757,7 @@ extern void show_registers(struct pt_reg
: "r" (value), "r" (addr), "i" (-EFAULT) \
: "memory");
-#define StoreDW(addr, value, res) \
+#define _StoreDW(addr, value, res) \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
@@ -801,6 +801,22 @@ extern void show_registers(struct pt_reg
#endif /* CONFIG_CPU_MIPSR6 */
#endif
+#define LoadHWU(addr, value, res) _LoadHWU(addr, value, res, kernel)
+#define LoadHWUE(addr, value, res) _LoadHWU(addr, value, res, user)
+#define LoadWU(addr, value, res) _LoadWU(addr, value, res, kernel)
+#define LoadWUE(addr, value, res) _LoadWU(addr, value, res, user)
+#define LoadHW(addr, value, res) _LoadHW(addr, value, res, kernel)
+#define LoadHWE(addr, value, res) _LoadHW(addr, value, res, user)
+#define LoadW(addr, value, res) _LoadW(addr, value, res, kernel)
+#define LoadWE(addr, value, res) _LoadW(addr, value, res, user)
+#define LoadDW(addr, value, res) _LoadDW(addr, value, res)
+
+#define StoreHW(addr, value, res) _StoreHW(addr, value, res, kernel)
+#define StoreHWE(addr, value, res) _StoreHW(addr, value, res, user)
+#define StoreW(addr, value, res) _StoreW(addr, value, res, kernel)
+#define StoreWE(addr, value, res) _StoreW(addr, value, res, user)
+#define StoreDW(addr, value, res) _StoreDW(addr, value, res)
+
static void emulate_load_store_insn(struct pt_regs *regs,
void __user *addr, unsigned int __user *pc)
{
@@ -872,7 +888,7 @@ static void emulate_load_store_insn(stru
set_fs(seg);
goto sigbus;
}
- LoadHW(addr, value, res);
+ LoadHWE(addr, value, res);
if (res) {
set_fs(seg);
goto fault;
@@ -885,7 +901,7 @@ static void emulate_load_store_insn(stru
set_fs(seg);
goto sigbus;
}
- LoadW(addr, value, res);
+ LoadWE(addr, value, res);
if (res) {
set_fs(seg);
goto fault;
@@ -898,7 +914,7 @@ static void emulate_load_store_insn(stru
set_fs(seg);
goto sigbus;
}
- LoadHWU(addr, value, res);
+ LoadHWUE(addr, value, res);
if (res) {
set_fs(seg);
goto fault;
@@ -913,7 +929,7 @@ static void emulate_load_store_insn(stru
}
compute_return_epc(regs);
value = regs->regs[insn.spec3_format.rt];
- StoreHW(addr, value, res);
+ StoreHWE(addr, value, res);
if (res) {
set_fs(seg);
goto fault;
@@ -926,7 +942,7 @@ static void emulate_load_store_insn(stru
}
compute_return_epc(regs);
value = regs->regs[insn.spec3_format.rt];
- StoreW(addr, value, res);
+ StoreWE(addr, value, res);
if (res) {
set_fs(seg);
goto fault;
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 4.0 040/220] MIPS: unaligned: Surround load/store macros in do {} while statements
[not found] <20150502185854.333748961@linuxfoundation.org>
` (4 preceding siblings ...)
2015-05-02 18:59 ` [PATCH 4.0 039/220] MIPS: unaligned: Prevent EVA instructions on kernel unaligned accesses Greg Kroah-Hartman
@ 2015-05-02 18:59 ` Greg Kroah-Hartman
2015-05-02 18:59 ` [PATCH 4.0 041/220] MIPS: unaligned: Fix regular load/store instruction emulation for EVA Greg Kroah-Hartman
` (2 subsequent siblings)
8 siblings, 0 replies; 9+ messages in thread
From: Greg Kroah-Hartman @ 2015-05-02 18:59 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Markos Chandras, linux-mips,
Ralf Baechle
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Markos Chandras <markos.chandras@imgtec.com>
commit 3563c32d6532ece53c9dd8905a8e41983ef9952f upstream.
It's best to surround such complex macros with do {} while statements
so they can appear as independent logical blocks when used within other
control blocks.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9502/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/mips/kernel/unaligned.c | 116 +++++++++++++++++++++++++++++++++----------
1 file changed, 90 insertions(+), 26 deletions(-)
--- a/arch/mips/kernel/unaligned.c
+++ b/arch/mips/kernel/unaligned.c
@@ -110,6 +110,7 @@ extern void show_registers(struct pt_reg
#ifdef __BIG_ENDIAN
#define _LoadHW(addr, value, res, type) \
+do { \
__asm__ __volatile__ (".set\tnoat\n" \
"1:\t"type##_lb("%0", "0(%2)")"\n" \
"2:\t"type##_lbu("$1", "1(%2)")"\n\t"\
@@ -127,10 +128,12 @@ extern void show_registers(struct pt_reg
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
#ifndef CONFIG_CPU_MIPSR6
#define _LoadW(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
"1:\t"type##_lwl("%0", "(%2)")"\n" \
"2:\t"type##_lwr("%0", "3(%2)")"\n\t"\
@@ -146,10 +149,13 @@ extern void show_registers(struct pt_reg
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
+
#else
/* MIPSR6 has no lwl instruction */
#define _LoadW(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
".set\tpush\n" \
".set\tnoat\n\t" \
@@ -178,10 +184,13 @@ extern void show_registers(struct pt_reg
STR(PTR)"\t4b, 11b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
+
#endif /* CONFIG_CPU_MIPSR6 */
#define _LoadHWU(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
".set\tnoat\n" \
"1:\t"type##_lbu("%0", "0(%2)")"\n" \
@@ -201,10 +210,12 @@ extern void show_registers(struct pt_reg
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
#ifndef CONFIG_CPU_MIPSR6
#define _LoadWU(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
"1:\t"type##_lwl("%0", "(%2)")"\n" \
"2:\t"type##_lwr("%0", "3(%2)")"\n\t"\
@@ -222,9 +233,11 @@ extern void show_registers(struct pt_reg
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
#define _LoadDW(addr, value, res) \
+do { \
__asm__ __volatile__ ( \
"1:\tldl\t%0, (%2)\n" \
"2:\tldr\t%0, 7(%2)\n\t" \
@@ -240,10 +253,13 @@ extern void show_registers(struct pt_reg
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
+
#else
/* MIPSR6 has not lwl and ldl instructions */
#define _LoadWU(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
@@ -272,9 +288,11 @@ extern void show_registers(struct pt_reg
STR(PTR)"\t4b, 11b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
#define _LoadDW(addr, value, res) \
+do { \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
@@ -319,11 +337,14 @@ extern void show_registers(struct pt_reg
STR(PTR)"\t8b, 11b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
+
#endif /* CONFIG_CPU_MIPSR6 */
#define _StoreHW(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
".set\tnoat\n" \
"1:\t"type##_sb("%1", "1(%2)")"\n" \
@@ -342,10 +363,12 @@ extern void show_registers(struct pt_reg
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=r" (res) \
- : "r" (value), "r" (addr), "i" (-EFAULT));
+ : "r" (value), "r" (addr), "i" (-EFAULT));\
+} while(0)
#ifndef CONFIG_CPU_MIPSR6
#define _StoreW(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
"1:\t"type##_swl("%1", "(%2)")"\n" \
"2:\t"type##_swr("%1", "3(%2)")"\n\t"\
@@ -361,9 +384,11 @@ extern void show_registers(struct pt_reg
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=r" (res) \
- : "r" (value), "r" (addr), "i" (-EFAULT));
+ : "r" (value), "r" (addr), "i" (-EFAULT)); \
+} while(0)
#define _StoreDW(addr, value, res) \
+do { \
__asm__ __volatile__ ( \
"1:\tsdl\t%1,(%2)\n" \
"2:\tsdr\t%1, 7(%2)\n\t" \
@@ -379,10 +404,13 @@ extern void show_registers(struct pt_reg
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=r" (res) \
- : "r" (value), "r" (addr), "i" (-EFAULT));
+ : "r" (value), "r" (addr), "i" (-EFAULT)); \
+} while(0)
+
#else
/* MIPSR6 has no swl and sdl instructions */
#define _StoreW(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
@@ -409,9 +437,11 @@ extern void show_registers(struct pt_reg
".previous" \
: "=&r" (res) \
: "r" (value), "r" (addr), "i" (-EFAULT) \
- : "memory");
+ : "memory"); \
+} while(0)
#define StoreDW(addr, value, res) \
+do { \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
@@ -451,12 +481,15 @@ extern void show_registers(struct pt_reg
".previous" \
: "=&r" (res) \
: "r" (value), "r" (addr), "i" (-EFAULT) \
- : "memory");
+ : "memory"); \
+} while(0)
+
#endif /* CONFIG_CPU_MIPSR6 */
#else /* __BIG_ENDIAN */
#define _LoadHW(addr, value, res, type) \
+do { \
__asm__ __volatile__ (".set\tnoat\n" \
"1:\t"type##_lb("%0", "1(%2)")"\n" \
"2:\t"type##_lbu("$1", "0(%2)")"\n\t"\
@@ -474,10 +507,12 @@ extern void show_registers(struct pt_reg
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
#ifndef CONFIG_CPU_MIPSR6
#define _LoadW(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
"1:\t"type##_lwl("%0", "3(%2)")"\n" \
"2:\t"type##_lwr("%0", "(%2)")"\n\t"\
@@ -493,10 +528,13 @@ extern void show_registers(struct pt_reg
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
+
#else
/* MIPSR6 has no lwl instruction */
#define _LoadW(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
".set\tpush\n" \
".set\tnoat\n\t" \
@@ -525,11 +563,14 @@ extern void show_registers(struct pt_reg
STR(PTR)"\t4b, 11b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
+
#endif /* CONFIG_CPU_MIPSR6 */
#define _LoadHWU(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
".set\tnoat\n" \
"1:\t"type##_lbu("%0", "1(%2)")"\n" \
@@ -549,10 +590,12 @@ extern void show_registers(struct pt_reg
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
#ifndef CONFIG_CPU_MIPSR6
#define _LoadWU(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
"1:\t"type##_lwl("%0", "3(%2)")"\n" \
"2:\t"type##_lwr("%0", "(%2)")"\n\t"\
@@ -570,9 +613,11 @@ extern void show_registers(struct pt_reg
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
#define _LoadDW(addr, value, res) \
+do { \
__asm__ __volatile__ ( \
"1:\tldl\t%0, 7(%2)\n" \
"2:\tldr\t%0, (%2)\n\t" \
@@ -588,10 +633,13 @@ extern void show_registers(struct pt_reg
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
+
#else
/* MIPSR6 has not lwl and ldl instructions */
#define _LoadWU(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
@@ -620,9 +668,11 @@ extern void show_registers(struct pt_reg
STR(PTR)"\t4b, 11b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
#define _LoadDW(addr, value, res) \
+do { \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
@@ -667,10 +717,12 @@ extern void show_registers(struct pt_reg
STR(PTR)"\t8b, 11b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
#endif /* CONFIG_CPU_MIPSR6 */
#define _StoreHW(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
".set\tnoat\n" \
"1:\t"type##_sb("%1", "0(%2)")"\n" \
@@ -689,9 +741,12 @@ extern void show_registers(struct pt_reg
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=r" (res) \
- : "r" (value), "r" (addr), "i" (-EFAULT));
+ : "r" (value), "r" (addr), "i" (-EFAULT));\
+} while(0)
+
#ifndef CONFIG_CPU_MIPSR6
#define _StoreW(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
"1:\t"type##_swl("%1", "3(%2)")"\n" \
"2:\t"type##_swr("%1", "(%2)")"\n\t"\
@@ -707,9 +762,11 @@ extern void show_registers(struct pt_reg
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=r" (res) \
- : "r" (value), "r" (addr), "i" (-EFAULT));
+ : "r" (value), "r" (addr), "i" (-EFAULT)); \
+} while(0)
#define _StoreDW(addr, value, res) \
+do { \
__asm__ __volatile__ ( \
"1:\tsdl\t%1, 7(%2)\n" \
"2:\tsdr\t%1, (%2)\n\t" \
@@ -725,10 +782,13 @@ extern void show_registers(struct pt_reg
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=r" (res) \
- : "r" (value), "r" (addr), "i" (-EFAULT));
+ : "r" (value), "r" (addr), "i" (-EFAULT)); \
+} while(0)
+
#else
/* MIPSR6 has no swl and sdl instructions */
#define _StoreW(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
@@ -755,9 +815,11 @@ extern void show_registers(struct pt_reg
".previous" \
: "=&r" (res) \
: "r" (value), "r" (addr), "i" (-EFAULT) \
- : "memory");
+ : "memory"); \
+} while(0)
#define _StoreDW(addr, value, res) \
+do { \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
@@ -797,7 +859,9 @@ extern void show_registers(struct pt_reg
".previous" \
: "=&r" (res) \
: "r" (value), "r" (addr), "i" (-EFAULT) \
- : "memory");
+ : "memory"); \
+} while(0)
+
#endif /* CONFIG_CPU_MIPSR6 */
#endif
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 4.0 041/220] MIPS: unaligned: Fix regular load/store instruction emulation for EVA
[not found] <20150502185854.333748961@linuxfoundation.org>
` (5 preceding siblings ...)
2015-05-02 18:59 ` [PATCH 4.0 040/220] MIPS: unaligned: Surround load/store macros in do {} while statements Greg Kroah-Hartman
@ 2015-05-02 18:59 ` Greg Kroah-Hartman
2015-05-02 18:59 ` [PATCH 4.0 042/220] MIPS: Loongson-3: Add IRQF_NO_SUSPEND to Cascade irqaction Greg Kroah-Hartman
2015-05-02 18:59 ` [PATCH 4.0 043/220] MIPS: Hibernate: flush TLB entries earlier Greg Kroah-Hartman
8 siblings, 0 replies; 9+ messages in thread
From: Greg Kroah-Hartman @ 2015-05-02 18:59 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Markos Chandras, linux-mips,
Ralf Baechle
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Markos Chandras <markos.chandras@imgtec.com>
commit 6eae35485b26f9e51ab896eb8a936bed9908fdf6 upstream.
When emulating a regular lh/lw/lhu/sh/sw we need to use the appropriate
instruction if we are in EVA mode. This is necessary for userspace
applications which trigger alignment exceptions. In such case, the
userspace load/store instruction needs to be emulated with the correct
eva/non-eva instruction by the kernel emulator.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Fixes: c1771216ab48 ("MIPS: kernel: unaligned: Handle unaligned accesses for EVA")
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9503/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/mips/kernel/unaligned.c | 52 ++++++++++++++++++++++++++++++++++++++-----
1 file changed, 47 insertions(+), 5 deletions(-)
--- a/arch/mips/kernel/unaligned.c
+++ b/arch/mips/kernel/unaligned.c
@@ -1023,7 +1023,15 @@ static void emulate_load_store_insn(stru
if (!access_ok(VERIFY_READ, addr, 2))
goto sigbus;
- LoadHW(addr, value, res);
+ if (config_enabled(CONFIG_EVA)) {
+ if (segment_eq(get_fs(), get_ds()))
+ LoadHW(addr, value, res);
+ else
+ LoadHWE(addr, value, res);
+ } else {
+ LoadHW(addr, value, res);
+ }
+
if (res)
goto fault;
compute_return_epc(regs);
@@ -1034,7 +1042,15 @@ static void emulate_load_store_insn(stru
if (!access_ok(VERIFY_READ, addr, 4))
goto sigbus;
- LoadW(addr, value, res);
+ if (config_enabled(CONFIG_EVA)) {
+ if (segment_eq(get_fs(), get_ds()))
+ LoadW(addr, value, res);
+ else
+ LoadWE(addr, value, res);
+ } else {
+ LoadW(addr, value, res);
+ }
+
if (res)
goto fault;
compute_return_epc(regs);
@@ -1045,7 +1061,15 @@ static void emulate_load_store_insn(stru
if (!access_ok(VERIFY_READ, addr, 2))
goto sigbus;
- LoadHWU(addr, value, res);
+ if (config_enabled(CONFIG_EVA)) {
+ if (segment_eq(get_fs(), get_ds()))
+ LoadHWU(addr, value, res);
+ else
+ LoadHWUE(addr, value, res);
+ } else {
+ LoadHWU(addr, value, res);
+ }
+
if (res)
goto fault;
compute_return_epc(regs);
@@ -1104,7 +1128,16 @@ static void emulate_load_store_insn(stru
compute_return_epc(regs);
value = regs->regs[insn.i_format.rt];
- StoreHW(addr, value, res);
+
+ if (config_enabled(CONFIG_EVA)) {
+ if (segment_eq(get_fs(), get_ds()))
+ StoreHW(addr, value, res);
+ else
+ StoreHWE(addr, value, res);
+ } else {
+ StoreHW(addr, value, res);
+ }
+
if (res)
goto fault;
break;
@@ -1115,7 +1148,16 @@ static void emulate_load_store_insn(stru
compute_return_epc(regs);
value = regs->regs[insn.i_format.rt];
- StoreW(addr, value, res);
+
+ if (config_enabled(CONFIG_EVA)) {
+ if (segment_eq(get_fs(), get_ds()))
+ StoreW(addr, value, res);
+ else
+ StoreWE(addr, value, res);
+ } else {
+ StoreW(addr, value, res);
+ }
+
if (res)
goto fault;
break;
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 4.0 042/220] MIPS: Loongson-3: Add IRQF_NO_SUSPEND to Cascade irqaction
[not found] <20150502185854.333748961@linuxfoundation.org>
` (6 preceding siblings ...)
2015-05-02 18:59 ` [PATCH 4.0 041/220] MIPS: unaligned: Fix regular load/store instruction emulation for EVA Greg Kroah-Hartman
@ 2015-05-02 18:59 ` Greg Kroah-Hartman
2015-05-02 18:59 ` [PATCH 4.0 043/220] MIPS: Hibernate: flush TLB entries earlier Greg Kroah-Hartman
8 siblings, 0 replies; 9+ messages in thread
From: Greg Kroah-Hartman @ 2015-05-02 18:59 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Huacai Chen, Steven J. Hill,
linux-mips, Fuxin Zhang, Zhangjin Wu, Ralf Baechle
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Huacai Chen <chenhc@lemote.com>
commit 0add9c2f1cff9f3f1f2eb7e9babefa872a9d14b9 upstream.
HPET irq is routed to i8259 and then to MIPS CPU irq (cascade). After
commit a3e6c1eff5 (MIPS: IRQ: Fix disable_irq on CPU IRQs), if without
IRQF_NO_SUSPEND in cascade_irqaction, HPET interrupts will lost during
suspend. The result is machine cannot be waken up.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/9528/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/mips/loongson/loongson-3/irq.c | 1 +
1 file changed, 1 insertion(+)
--- a/arch/mips/loongson/loongson-3/irq.c
+++ b/arch/mips/loongson/loongson-3/irq.c
@@ -44,6 +44,7 @@ void mach_irq_dispatch(unsigned int pend
static struct irqaction cascade_irqaction = {
.handler = no_action,
+ .flags = IRQF_NO_SUSPEND,
.name = "cascade",
};
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 4.0 043/220] MIPS: Hibernate: flush TLB entries earlier
[not found] <20150502185854.333748961@linuxfoundation.org>
` (7 preceding siblings ...)
2015-05-02 18:59 ` [PATCH 4.0 042/220] MIPS: Loongson-3: Add IRQF_NO_SUSPEND to Cascade irqaction Greg Kroah-Hartman
@ 2015-05-02 18:59 ` Greg Kroah-Hartman
8 siblings, 0 replies; 9+ messages in thread
From: Greg Kroah-Hartman @ 2015-05-02 18:59 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Huacai Chen, Steven J. Hill,
linux-mips, Fuxin Zhang, Zhangjin Wu, Ralf Baechle
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Huacai Chen <chenhc@lemote.com>
commit a843d00d038b11267279e3b5388222320f9ddc1d upstream.
We found that TLB mismatch not only happens after kernel resume, but
also happens during snapshot restore. So move it to the beginning of
swsusp_arch_suspend().
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/9621/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/mips/power/hibernate.S | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/arch/mips/power/hibernate.S
+++ b/arch/mips/power/hibernate.S
@@ -30,6 +30,8 @@ LEAF(swsusp_arch_suspend)
END(swsusp_arch_suspend)
LEAF(swsusp_arch_resume)
+ /* Avoid TLB mismatch during and after kernel resume */
+ jal local_flush_tlb_all
PTR_L t0, restore_pblist
0:
PTR_L t1, PBE_ADDRESS(t0) /* source */
@@ -43,7 +45,6 @@ LEAF(swsusp_arch_resume)
bne t1, t3, 1b
PTR_L t0, PBE_NEXT(t0)
bnez t0, 0b
- jal local_flush_tlb_all /* Avoid TLB mismatch after kernel resume */
PTR_LA t0, saved_regs
PTR_L ra, PT_R31(t0)
PTR_L sp, PT_R29(t0)
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2015-05-02 19:13 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20150502185854.333748961@linuxfoundation.org>
2015-05-02 18:59 ` [PATCH 4.0 035/220] MIPS: KVM: Handle MSA Disabled exceptions from guest Greg Kroah-Hartman
2015-05-02 18:59 ` [PATCH 4.0 036/220] MIPS: lose_fpu(): Disable FPU when MSA enabled Greg Kroah-Hartman
2015-05-02 18:59 ` [PATCH 4.0 037/220] MIPS: Malta: Detect and fix bad memsize values Greg Kroah-Hartman
2015-05-02 18:59 ` [PATCH 4.0 038/220] MIPS: asm: asm-eva: Introduce kernel load/store variants Greg Kroah-Hartman
2015-05-02 18:59 ` [PATCH 4.0 039/220] MIPS: unaligned: Prevent EVA instructions on kernel unaligned accesses Greg Kroah-Hartman
2015-05-02 18:59 ` [PATCH 4.0 040/220] MIPS: unaligned: Surround load/store macros in do {} while statements Greg Kroah-Hartman
2015-05-02 18:59 ` [PATCH 4.0 041/220] MIPS: unaligned: Fix regular load/store instruction emulation for EVA Greg Kroah-Hartman
2015-05-02 18:59 ` [PATCH 4.0 042/220] MIPS: Loongson-3: Add IRQF_NO_SUSPEND to Cascade irqaction Greg Kroah-Hartman
2015-05-02 18:59 ` [PATCH 4.0 043/220] MIPS: Hibernate: flush TLB entries earlier Greg Kroah-Hartman
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox