[PATCH 4.1 161/202] MIPS: dma-default: Fix 32-bit fall back to GFP_DMA

[PATCH 4.1 161/202] MIPS: dma-default: Fix 32-bit fall back to GFP_DMA

[Greg Kroah-Hartman]

4.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Hogan <james.hogan@imgtec.com>

commit 53960059d56ecef67d4ddd546731623641a3d2d1 upstream.

If there is a DMA zone (usually 24bit = 16MB I believe), but no DMA32
zone, as is the case for some 32-bit kernels, then massage_gfp_flags()
will cause DMA memory allocated for devices with a 32..63-bit
coherent_dma_mask to fall back to using __GFP_DMA, even though there may
only be 32-bits of physical address available anyway.

Correct that case to compare against a mask the size of phys_addr_t
instead of always using a 64-bit mask.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Fixes: a2e715a86c6d ("MIPS: DMA: Fix computation of DMA flags from device's coherent_dma_mask.")
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9610/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/mm/dma-default.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -100,7 +100,7 @@ static gfp_t massage_gfp_flags(const str
 	else
 #endif
 #if defined(CONFIG_ZONE_DMA) && !defined(CONFIG_ZONE_DMA32)
-	     if (dev->coherent_dma_mask < DMA_BIT_MASK(64))
+	     if (dev->coherent_dma_mask < DMA_BIT_MASK(sizeof(phys_addr_t) * 8))
 		dma_flag = __GFP_DMA;
 	else
 #endif

[PATCH 4.1 201/202] MIPS: Fix console output for Fulong2e system

[Greg Kroah-Hartman]

4.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Guenter Roeck <linux@roeck-us.net>

commit fc2ca674470bbfe11d72a20a3f19fd3dc43bfca0 upstream.

Commit 3adeb2566b9b ("MIPS: Loongson: Improve LEFI firmware interface")
made the number of UARTs dynamic if LEFI_FIRMWARE_INTERFACE is configured.
Unfortunately, it did not initialize the number of UARTs if
LEFI_FIRMWARE_INTERFACE is not configured. As a result, the Fulong2e
system has no console.

Fixes: 3adeb2566b9b ("MIPS: Loongson: Improve LEFI firmware interface")
Acked-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11076/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/loongson/common/env.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/arch/mips/loongson/common/env.c
+++ b/arch/mips/loongson/common/env.c
@@ -64,6 +64,9 @@ void __init prom_init_env(void)
 	}
 	if (memsize == 0)
 		memsize = 256;
+
+	loongson_sysconf.nr_uarts = 1;
+
 	pr_info("memsize=%u, highmemsize=%u\n", memsize, highmemsize);
 #else
 	struct boot_params *boot_p;