[PATCH 4.5 073/124] MIPS: Fix MSA ld unaligned failure cases

[PATCH 4.5 073/124] MIPS: Fix MSA ld unaligned failure cases

[Greg Kroah-Hartman]

4.5-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paul Burton <paul.burton@imgtec.com>

commit fa8ff601d72bad3078ddf5ef17a5547700d06908 upstream.

Copying the content of an MSA vector from user memory may involve TLB
faults & mapping in pages. This will fail when preemption is disabled
due to an inability to acquire mmap_sem from do_page_fault, which meant
such vector loads to unmapped pages would always fail to be emulated.
Fix this by disabling preemption later only around the updating of
vector register state.

This change does however introduce a race between performing the load
into thread context & the thread being preempted, saving its current
live context & clobbering the loaded value. This should be a rare
occureence, so optimise for the fast path by simply repeating the load if
we are preempted.

Additionally if the copy failed then the failure path was taken with
preemption left disabled, leading to the kernel typically encountering
further issues around sleeping whilst atomic. The change to where
preemption is disabled avoids this issue.

Fixes: e4aa1f153add "MIPS: MSA unaligned memory access support"
Reported-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: James Cowgill <James.Cowgill@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12345/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/kernel/unaligned.c |   53 +++++++++++++++++++++++++------------------
 1 file changed, 31 insertions(+), 22 deletions(-)

--- a/arch/mips/kernel/unaligned.c
+++ b/arch/mips/kernel/unaligned.c
@@ -885,7 +885,7 @@ static void emulate_load_store_insn(stru
 {
 	union mips_instruction insn;
 	unsigned long value;
-	unsigned int res;
+	unsigned int res, preempted;
 	unsigned long origpc;
 	unsigned long orig31;
 	void __user *fault_addr = NULL;
@@ -1226,27 +1226,36 @@ static void emulate_load_store_insn(stru
 			if (!access_ok(VERIFY_READ, addr, sizeof(*fpr)))
 				goto sigbus;
 
-			/*
-			 * Disable preemption to avoid a race between copying
-			 * state from userland, migrating to another CPU and
-			 * updating the hardware vector register below.
-			 */
-			preempt_disable();
-
-			res = __copy_from_user_inatomic(fpr, addr,
-							sizeof(*fpr));
-			if (res)
-				goto fault;
-
-			/*
-			 * Update the hardware register if it is in use by the
-			 * task in this quantum, in order to avoid having to
-			 * save & restore the whole vector context.
-			 */
-			if (test_thread_flag(TIF_USEDMSA))
-				write_msa_wr(wd, fpr, df);
-
-			preempt_enable();
+			do {
+				/*
+				 * If we have live MSA context keep track of
+				 * whether we get preempted in order to avoid
+				 * the register context we load being clobbered
+				 * by the live context as it's saved during
+				 * preemption. If we don't have live context
+				 * then it can't be saved to clobber the value
+				 * we load.
+				 */
+				preempted = test_thread_flag(TIF_USEDMSA);
+
+				res = __copy_from_user_inatomic(fpr, addr,
+								sizeof(*fpr));
+				if (res)
+					goto fault;
+
+				/*
+				 * Update the hardware register if it is in use
+				 * by the task in this quantum, in order to
+				 * avoid having to save & restore the whole
+				 * vector context.
+				 */
+				preempt_disable();
+				if (test_thread_flag(TIF_USEDMSA)) {
+					write_msa_wr(wd, fpr, df);
+					preempted = 0;
+				}
+				preempt_enable();
+			} while (preempted);
 			break;
 
 		case msa_st_op:

[PATCH 4.5 074/124] pinctrl: pistachio: fix mfio84-89 function description and pinmux.

[Greg Kroah-Hartman]

4.5-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Govindraj Raja <Govindraj.Raja@imgtec.com>

commit e9adb336d0bf391be23e820975ca5cd12c31d781 upstream.

mfio 84 to 89 are described wrongly, fix it to describe
the right pin and add them to right pin-mux group.

The correct order is:
	pll1_lock => mips_pll	-- MFIO_83
	pll2_lock => audio_pll	-- MFIO_84
	pll3_lock => rpu_v_pll	-- MFIO_85
	pll4_lock => rpu_l_pll	-- MFIO_86
	pll5_lock => sys_pll	-- MFIO_87
	pll6_lock => wifi_pll	-- MFIO_88
	pll7_lock => bt_pll	-- MFIO_89

Cc: linux-gpio@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: James Hartley <James.Hartley@imgtec.com>
Fixes: cefc03e5995e("pinctrl: Add Pistachio SoC pin control driver")
Signed-off-by: Govindraj Raja <Govindraj.Raja@imgtec.com>
Acked-by: Andrew Bresticker <abrestic@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt |   12 ++---
 drivers/pinctrl/pinctrl-pistachio.c                                 |   24 +++++-----
 2 files changed, 18 insertions(+), 18 deletions(-)

--- a/Documentation/devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt
@@ -134,12 +134,12 @@ mfio80		ddr_debug, mips_trace_data, mips
 mfio81		dreq0, mips_trace_data, eth_debug
 mfio82		dreq1, mips_trace_data, eth_debug
 mfio83		mips_pll_lock, mips_trace_data, usb_debug
-mfio84		sys_pll_lock, mips_trace_data, usb_debug
-mfio85		wifi_pll_lock, mips_trace_data, sdhost_debug
-mfio86		bt_pll_lock, mips_trace_data, sdhost_debug
-mfio87		rpu_v_pll_lock, dreq2, socif_debug
-mfio88		rpu_l_pll_lock, dreq3, socif_debug
-mfio89		audio_pll_lock, dreq4, dreq5
+mfio84		audio_pll_lock, mips_trace_data, usb_debug
+mfio85		rpu_v_pll_lock, mips_trace_data, sdhost_debug
+mfio86		rpu_l_pll_lock, mips_trace_data, sdhost_debug
+mfio87		sys_pll_lock, dreq2, socif_debug
+mfio88		wifi_pll_lock, dreq3, socif_debug
+mfio89		bt_pll_lock, dreq4, dreq5
 tck
 trstn
 tdi
--- a/drivers/pinctrl/pinctrl-pistachio.c
+++ b/drivers/pinctrl/pinctrl-pistachio.c
@@ -469,27 +469,27 @@ static const char * const pistachio_mips
 	"mfio83",
 };
 
-static const char * const pistachio_sys_pll_lock_groups[] = {
+static const char * const pistachio_audio_pll_lock_groups[] = {
 	"mfio84",
 };
 
-static const char * const pistachio_wifi_pll_lock_groups[] = {
+static const char * const pistachio_rpu_v_pll_lock_groups[] = {
 	"mfio85",
 };
 
-static const char * const pistachio_bt_pll_lock_groups[] = {
+static const char * const pistachio_rpu_l_pll_lock_groups[] = {
 	"mfio86",
 };
 
-static const char * const pistachio_rpu_v_pll_lock_groups[] = {
+static const char * const pistachio_sys_pll_lock_groups[] = {
 	"mfio87",
 };
 
-static const char * const pistachio_rpu_l_pll_lock_groups[] = {
+static const char * const pistachio_wifi_pll_lock_groups[] = {
 	"mfio88",
 };
 
-static const char * const pistachio_audio_pll_lock_groups[] = {
+static const char * const pistachio_bt_pll_lock_groups[] = {
 	"mfio89",
 };
 
@@ -559,12 +559,12 @@ enum pistachio_mux_option {
 	PISTACHIO_FUNCTION_DREQ4,
 	PISTACHIO_FUNCTION_DREQ5,
 	PISTACHIO_FUNCTION_MIPS_PLL_LOCK,
+	PISTACHIO_FUNCTION_AUDIO_PLL_LOCK,
+	PISTACHIO_FUNCTION_RPU_V_PLL_LOCK,
+	PISTACHIO_FUNCTION_RPU_L_PLL_LOCK,
 	PISTACHIO_FUNCTION_SYS_PLL_LOCK,
 	PISTACHIO_FUNCTION_WIFI_PLL_LOCK,
 	PISTACHIO_FUNCTION_BT_PLL_LOCK,
-	PISTACHIO_FUNCTION_RPU_V_PLL_LOCK,
-	PISTACHIO_FUNCTION_RPU_L_PLL_LOCK,
-	PISTACHIO_FUNCTION_AUDIO_PLL_LOCK,
 	PISTACHIO_FUNCTION_DEBUG_RAW_CCA_IND,
 	PISTACHIO_FUNCTION_DEBUG_ED_SEC20_CCA_IND,
 	PISTACHIO_FUNCTION_DEBUG_ED_SEC40_CCA_IND,
@@ -620,12 +620,12 @@ static const struct pistachio_function p
 	FUNCTION(dreq4),
 	FUNCTION(dreq5),
 	FUNCTION(mips_pll_lock),
+	FUNCTION(audio_pll_lock),
+	FUNCTION(rpu_v_pll_lock),
+	FUNCTION(rpu_l_pll_lock),
 	FUNCTION(sys_pll_lock),
 	FUNCTION(wifi_pll_lock),
 	FUNCTION(bt_pll_lock),
-	FUNCTION(rpu_v_pll_lock),
-	FUNCTION(rpu_l_pll_lock),
-	FUNCTION(audio_pll_lock),
 	FUNCTION(debug_raw_cca_ind),
 	FUNCTION(debug_ed_sec20_cca_ind),
 	FUNCTION(debug_ed_sec40_cca_ind),

[PATCH 4.5 084/124] pcmcia: db1xxx_ss: fix last irq_to_gpio user

[Greg Kroah-Hartman]

4.5-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Manuel Lauss <manuel.lauss@gmail.com>

commit e34b6fcf9b09ec9d93503edd5f81489791ffd602 upstream.

remove the usage of removed irq_to_gpio() function.  On pre-DB1200
boards, pass the actual carddetect GPIO number instead of the IRQ,
because we need the gpio to actually test card status (inserted or
not) and can get the irq number with gpio_to_irq() instead.

Tested on DB1300 and DB1500, this patch fixes PCMCIA on the DB1500,
which used irq_to_gpio().

Fixes: 832f5dacfa0b ("MIPS: Remove all the uses of custom gpio.h")
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-pcmcia@lists.infradead.org
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/12747/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/alchemy/devboards/db1000.c |   18 ++++++++----------
 arch/mips/alchemy/devboards/db1550.c |    4 ++--
 drivers/pcmcia/db1xxx_ss.c           |   11 +++++++++--
 3 files changed, 19 insertions(+), 14 deletions(-)

--- a/arch/mips/alchemy/devboards/db1000.c
+++ b/arch/mips/alchemy/devboards/db1000.c
@@ -503,15 +503,15 @@ int __init db1000_dev_setup(void)
 	if (board == BCSR_WHOAMI_DB1500) {
 		c0 = AU1500_GPIO2_INT;
 		c1 = AU1500_GPIO5_INT;
-		d0 = AU1500_GPIO0_INT;
-		d1 = AU1500_GPIO3_INT;
+		d0 = 0;	/* GPIO number, NOT irq! */
+		d1 = 3; /* GPIO number, NOT irq! */
 		s0 = AU1500_GPIO1_INT;
 		s1 = AU1500_GPIO4_INT;
 	} else if (board == BCSR_WHOAMI_DB1100) {
 		c0 = AU1100_GPIO2_INT;
 		c1 = AU1100_GPIO5_INT;
-		d0 = AU1100_GPIO0_INT;
-		d1 = AU1100_GPIO3_INT;
+		d0 = 0; /* GPIO number, NOT irq! */
+		d1 = 3; /* GPIO number, NOT irq! */
 		s0 = AU1100_GPIO1_INT;
 		s1 = AU1100_GPIO4_INT;
 
@@ -545,15 +545,15 @@ int __init db1000_dev_setup(void)
 	} else if (board == BCSR_WHOAMI_DB1000) {
 		c0 = AU1000_GPIO2_INT;
 		c1 = AU1000_GPIO5_INT;
-		d0 = AU1000_GPIO0_INT;
-		d1 = AU1000_GPIO3_INT;
+		d0 = 0; /* GPIO number, NOT irq! */
+		d1 = 3; /* GPIO number, NOT irq! */
 		s0 = AU1000_GPIO1_INT;
 		s1 = AU1000_GPIO4_INT;
 		platform_add_devices(db1000_devs, ARRAY_SIZE(db1000_devs));
 	} else if ((board == BCSR_WHOAMI_PB1500) ||
 		   (board == BCSR_WHOAMI_PB1500R2)) {
 		c0 = AU1500_GPIO203_INT;
-		d0 = AU1500_GPIO201_INT;
+		d0 = 1; /* GPIO number, NOT irq! */
 		s0 = AU1500_GPIO202_INT;
 		twosocks = 0;
 		flashsize = 64;
@@ -566,7 +566,7 @@ int __init db1000_dev_setup(void)
 		 */
 	} else if (board == BCSR_WHOAMI_PB1100) {
 		c0 = AU1100_GPIO11_INT;
-		d0 = AU1100_GPIO9_INT;
+		d0 = 9; /* GPIO number, NOT irq! */
 		s0 = AU1100_GPIO10_INT;
 		twosocks = 0;
 		flashsize = 64;
@@ -583,7 +583,6 @@ int __init db1000_dev_setup(void)
 	} else
 		return 0; /* unknown board, no further dev setup to do */
 
-	irq_set_irq_type(d0, IRQ_TYPE_EDGE_BOTH);
 	irq_set_irq_type(c0, IRQ_TYPE_LEVEL_LOW);
 	irq_set_irq_type(s0, IRQ_TYPE_LEVEL_LOW);
 
@@ -597,7 +596,6 @@ int __init db1000_dev_setup(void)
 		c0, d0, /*s0*/0, 0, 0);
 
 	if (twosocks) {
-		irq_set_irq_type(d1, IRQ_TYPE_EDGE_BOTH);
 		irq_set_irq_type(c1, IRQ_TYPE_LEVEL_LOW);
 		irq_set_irq_type(s1, IRQ_TYPE_LEVEL_LOW);
 
--- a/arch/mips/alchemy/devboards/db1550.c
+++ b/arch/mips/alchemy/devboards/db1550.c
@@ -514,7 +514,7 @@ static void __init db1550_devices(void)
 		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
 		AU1000_PCMCIA_IO_PHYS_ADDR,
 		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
-		AU1550_GPIO3_INT, AU1550_GPIO0_INT,
+		AU1550_GPIO3_INT, 0,
 		/*AU1550_GPIO21_INT*/0, 0, 0);
 
 	db1x_register_pcmcia_socket(
@@ -524,7 +524,7 @@ static void __init db1550_devices(void)
 		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x004400000 - 1,
 		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x004000000,
 		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x004010000 - 1,
-		AU1550_GPIO5_INT, AU1550_GPIO1_INT,
+		AU1550_GPIO5_INT, 1,
 		/*AU1550_GPIO22_INT*/0, 0, 1);
 
 	platform_device_register(&db1550_nand_dev);
--- a/drivers/pcmcia/db1xxx_ss.c
+++ b/drivers/pcmcia/db1xxx_ss.c
@@ -56,6 +56,7 @@ struct db1x_pcmcia_sock {
 	int	stschg_irq;	/* card-status-change irq */
 	int	card_irq;	/* card irq */
 	int	eject_irq;	/* db1200/pb1200 have these */
+	int	insert_gpio;	/* db1000 carddetect gpio */
 
 #define BOARD_TYPE_DEFAULT	0	/* most boards */
 #define BOARD_TYPE_DB1200	1	/* IRQs aren't gpios */
@@ -83,7 +84,7 @@ static int db1200_card_inserted(struct d
 /* carddetect gpio: low-active */
 static int db1000_card_inserted(struct db1x_pcmcia_sock *sock)
 {
-	return !gpio_get_value(irq_to_gpio(sock->insert_irq));
+	return !gpio_get_value(sock->insert_gpio);
 }
 
 static int db1x_card_inserted(struct db1x_pcmcia_sock *sock)
@@ -457,9 +458,15 @@ static int db1x_pcmcia_socket_probe(stru
 	r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "card");
 	sock->card_irq = r ? r->start : 0;
 
-	/* insert: irq which triggers on card insertion/ejection */
+	/* insert: irq which triggers on card insertion/ejection
+	 * BIG FAT NOTE: on DB1000/1100/1500/1550 we pass a GPIO here!
+	 */
 	r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "insert");
 	sock->insert_irq = r ? r->start : -1;
+	if (sock->board_type == BOARD_TYPE_DEFAULT) {
+		sock->insert_gpio = r ? r->start : -1;
+		sock->insert_irq = r ? gpio_to_irq(r->start) : -1;
+	}
 
 	/* stschg: irq which trigger on card status change (optional) */
 	r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "stschg");