[PATCH 4.6 064/100] MIPS: KVM: Fix timer IRQ race when freezing timer

[PATCH 4.6 064/100] MIPS: KVM: Fix timer IRQ race when freezing timer

[Greg Kroah-Hartman]

4.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Hogan <james.hogan@imgtec.com>

commit 4355c44f063d3de4f072d796604c7f4ba4085cc3 upstream.

There's a particularly narrow and subtle race condition when the
software emulated guest timer is frozen which can allow a guest timer
interrupt to be missed.

This happens due to the hrtimer expiry being inexact, so very
occasionally the freeze time will be after the moment when the emulated
CP0_Count transitions to the same value as CP0_Compare (so an IRQ should
be generated), but before the moment when the hrtimer is due to expire
(so no IRQ is generated). The IRQ won't be generated when the timer is
resumed either, since the resume CP0_Count will already match CP0_Compare.

With VZ guests in particular this is far more likely to happen, since
the soft timer may be frozen frequently in order to restore the timer
state to the hardware guest timer. This happens after 5-10 hours of
guest soak testing, resulting in an overflow in guest kernel timekeeping
calculations, hanging the guest. A more focussed test case to
intentionally hit the race (with the help of a new hypcall to cause the
timer state to migrated between hardware & software) hits the condition
fairly reliably within around 30 seconds.

Instead of relying purely on the inexact hrtimer expiry to determine
whether an IRQ should be generated, read the guest CP0_Compare and
directly check whether the freeze time is before or after it. Only if
CP0_Count is on or after CP0_Compare do we check the hrtimer expiry to
determine whether the last IRQ has already been generated (which will
have pushed back the expiry by one timer period).

Fixes: e30492bbe95a ("MIPS: KVM: Rewrite count/compare timer emulation")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/kvm/emulate.c |   28 +++++++++++++++++++++++-----
 1 file changed, 23 insertions(+), 5 deletions(-)

--- a/arch/mips/kvm/emulate.c
+++ b/arch/mips/kvm/emulate.c
@@ -302,12 +302,31 @@ static inline ktime_t kvm_mips_count_tim
  */
 static uint32_t kvm_mips_read_count_running(struct kvm_vcpu *vcpu, ktime_t now)
 {
-	ktime_t expires;
+	struct mips_coproc *cop0 = vcpu->arch.cop0;
+	ktime_t expires, threshold;
+	uint32_t count, compare;
 	int running;
 
-	/* Is the hrtimer pending? */
+	/* Calculate the biased and scaled guest CP0_Count */
+	count = vcpu->arch.count_bias + kvm_mips_ktime_to_count(vcpu, now);
+	compare = kvm_read_c0_guest_compare(cop0);
+
+	/*
+	 * Find whether CP0_Count has reached the closest timer interrupt. If
+	 * not, we shouldn't inject it.
+	 */
+	if ((int32_t)(count - compare) < 0)
+		return count;
+
+	/*
+	 * The CP0_Count we're going to return has already reached the closest
+	 * timer interrupt. Quickly check if it really is a new interrupt by
+	 * looking at whether the interval until the hrtimer expiry time is
+	 * less than 1/4 of the timer period.
+	 */
 	expires = hrtimer_get_expires(&vcpu->arch.comparecount_timer);
-	if (ktime_compare(now, expires) >= 0) {
+	threshold = ktime_add_ns(now, vcpu->arch.count_period / 4);
+	if (ktime_before(expires, threshold)) {
 		/*
 		 * Cancel it while we handle it so there's no chance of
 		 * interference with the timeout handler.
@@ -329,8 +348,7 @@ static uint32_t kvm_mips_read_count_runn
 		}
 	}
 
-	/* Return the biased and scaled guest CP0_Count */
-	return vcpu->arch.count_bias + kvm_mips_ktime_to_count(vcpu, now);
+	return count;
 }
 
 /**

[PATCH 4.6 065/100] MIPS: KVM: Fix timer IRQ race when writing CP0_Compare

[Greg Kroah-Hartman]

4.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Hogan <james.hogan@imgtec.com>

commit b45bacd2d048f405c7760e5cc9b60dd67708734f upstream.

Writing CP0_Compare clears the timer interrupt pending bit
(CP0_Cause.TI), but this wasn't being done atomically. If a timer
interrupt raced with the write of the guest CP0_Compare, the timer
interrupt could end up being pending even though the new CP0_Compare is
nowhere near CP0_Count.

We were already updating the hrtimer expiry with
kvm_mips_update_hrtimer(), which used both kvm_mips_freeze_hrtimer() and
kvm_mips_resume_hrtimer(). Close the race window by expanding out
kvm_mips_update_hrtimer(), and clearing CP0_Cause.TI and setting
CP0_Compare between the freeze and resume. Since the pending timer
interrupt should not be cleared when CP0_Compare is written via the KVM
user API, an ack argument is added to distinguish the source of the
write.

Fixes: e30492bbe95a ("MIPS: KVM: Rewrite count/compare timer emulation")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/include/asm/kvm_host.h |    2 -
 arch/mips/kvm/emulate.c          |   61 +++++++++++++++++----------------------
 arch/mips/kvm/trap_emul.c        |    2 -
 3 files changed, 29 insertions(+), 36 deletions(-)

--- a/arch/mips/include/asm/kvm_host.h
+++ b/arch/mips/include/asm/kvm_host.h
@@ -747,7 +747,7 @@ extern enum emulation_result kvm_mips_co
 
 uint32_t kvm_mips_read_count(struct kvm_vcpu *vcpu);
 void kvm_mips_write_count(struct kvm_vcpu *vcpu, uint32_t count);
-void kvm_mips_write_compare(struct kvm_vcpu *vcpu, uint32_t compare);
+void kvm_mips_write_compare(struct kvm_vcpu *vcpu, uint32_t compare, bool ack);
 void kvm_mips_init_count(struct kvm_vcpu *vcpu);
 int kvm_mips_set_count_ctl(struct kvm_vcpu *vcpu, s64 count_ctl);
 int kvm_mips_set_count_resume(struct kvm_vcpu *vcpu, s64 count_resume);
--- a/arch/mips/kvm/emulate.c
+++ b/arch/mips/kvm/emulate.c
@@ -438,32 +438,6 @@ static void kvm_mips_resume_hrtimer(stru
 }
 
 /**
- * kvm_mips_update_hrtimer() - Update next expiry time of hrtimer.
- * @vcpu:	Virtual CPU.
- *
- * Recalculates and updates the expiry time of the hrtimer. This can be used
- * after timer parameters have been altered which do not depend on the time that
- * the change occurs (in those cases kvm_mips_freeze_hrtimer() and
- * kvm_mips_resume_hrtimer() are used directly).
- *
- * It is guaranteed that no timer interrupts will be lost in the process.
- *
- * Assumes !kvm_mips_count_disabled(@vcpu) (guest CP0_Count timer is running).
- */
-static void kvm_mips_update_hrtimer(struct kvm_vcpu *vcpu)
-{
-	ktime_t now;
-	uint32_t count;
-
-	/*
-	 * freeze_hrtimer takes care of a timer interrupts <= count, and
-	 * resume_hrtimer the hrtimer takes care of a timer interrupts > count.
-	 */
-	now = kvm_mips_freeze_hrtimer(vcpu, &count);
-	kvm_mips_resume_hrtimer(vcpu, now, count);
-}
-
-/**
  * kvm_mips_write_count() - Modify the count and update timer.
  * @vcpu:	Virtual CPU.
  * @count:	Guest CP0_Count value to set.
@@ -558,23 +532,42 @@ int kvm_mips_set_count_hz(struct kvm_vcp
  * kvm_mips_write_compare() - Modify compare and update timer.
  * @vcpu:	Virtual CPU.
  * @compare:	New CP0_Compare value.
+ * @ack:	Whether to acknowledge timer interrupt.
  *
  * Update CP0_Compare to a new value and update the timeout.
+ * If @ack, atomically acknowledge any pending timer interrupt, otherwise ensure
+ * any pending timer interrupt is preserved.
  */
-void kvm_mips_write_compare(struct kvm_vcpu *vcpu, uint32_t compare)
+void kvm_mips_write_compare(struct kvm_vcpu *vcpu, uint32_t compare, bool ack)
 {
 	struct mips_coproc *cop0 = vcpu->arch.cop0;
+	int dc;
+	u32 old_compare = kvm_read_c0_guest_compare(cop0);
+	ktime_t now;
+	uint32_t count;
 
 	/* if unchanged, must just be an ack */
-	if (kvm_read_c0_guest_compare(cop0) == compare)
+	if (old_compare == compare) {
+		if (!ack)
+			return;
+		kvm_mips_callbacks->dequeue_timer_int(vcpu);
+		kvm_write_c0_guest_compare(cop0, compare);
 		return;
+	}
+
+	/* freeze_hrtimer() takes care of timer interrupts <= count */
+	dc = kvm_mips_count_disabled(vcpu);
+	if (!dc)
+		now = kvm_mips_freeze_hrtimer(vcpu, &count);
+
+	if (ack)
+		kvm_mips_callbacks->dequeue_timer_int(vcpu);
 
-	/* Update compare */
 	kvm_write_c0_guest_compare(cop0, compare);
 
-	/* Update timeout if count enabled */
-	if (!kvm_mips_count_disabled(vcpu))
-		kvm_mips_update_hrtimer(vcpu);
+	/* resume_hrtimer() takes care of timer interrupts > count */
+	if (!dc)
+		kvm_mips_resume_hrtimer(vcpu, now, count);
 }
 
 /**
@@ -1113,9 +1106,9 @@ enum emulation_result kvm_mips_emulate_C
 
 				/* If we are writing to COMPARE */
 				/* Clear pending timer interrupt, if any */
-				kvm_mips_callbacks->dequeue_timer_int(vcpu);
 				kvm_mips_write_compare(vcpu,
-						       vcpu->arch.gprs[rt]);
+						       vcpu->arch.gprs[rt],
+						       true);
 			} else if ((rd == MIPS_CP0_STATUS) && (sel == 0)) {
 				unsigned int old_val, val, change;
 
--- a/arch/mips/kvm/trap_emul.c
+++ b/arch/mips/kvm/trap_emul.c
@@ -546,7 +546,7 @@ static int kvm_trap_emul_set_one_reg(str
 		kvm_mips_write_count(vcpu, v);
 		break;
 	case KVM_REG_MIPS_CP0_COMPARE:
-		kvm_mips_write_compare(vcpu, v);
+		kvm_mips_write_compare(vcpu, v, false);
 		break;
 	case KVM_REG_MIPS_CP0_CAUSE:
 		/*

[PATCH 4.6 092/100] SIGNAL: Move generic copy_siginfo() to signal.h

[Greg Kroah-Hartman]

4.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Hogan <james.hogan@imgtec.com>

commit ca9eb49aa9562eaadf3cea071ec7018ad6800425 upstream.

The generic copy_siginfo() is currently defined in
asm-generic/siginfo.h, after including uapi/asm-generic/siginfo.h which
defines the generic struct siginfo. However this makes it awkward for an
architecture to use it if it has to define its own struct siginfo (e.g.
MIPS and potentially IA64), since it means that asm-generic/siginfo.h
can only be included after defining the arch-specific siginfo, which may
be problematic if the arch-specific definition needs definitions from
uapi/asm-generic/siginfo.h.

It is possible to work around this by first including
uapi/asm-generic/siginfo.h to get the constants before defining the
arch-specific siginfo, and include asm-generic/siginfo.h after. However
uapi headers can't be included by other uapi headers, so that first
include has to be in an ifdef __kernel__, with the non __kernel__ case
including the non-UAPI header instead.

Instead of that mess, move the generic copy_siginfo() definition into
linux/signal.h, which allows an arch-specific uapi/asm/siginfo.h to
include asm-generic/siginfo.h and define the arch-specific siginfo, and
for the generic copy_siginfo() to see that arch-specific definition.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Petr Malat <oss@malat.biz>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Christopher Ferris <cferris@google.com>
Cc: linux-arch@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12478/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/asm-generic/siginfo.h |   15 ---------------
 include/linux/signal.h        |   15 +++++++++++++++
 2 files changed, 15 insertions(+), 15 deletions(-)

--- a/include/asm-generic/siginfo.h
+++ b/include/asm-generic/siginfo.h
@@ -17,21 +17,6 @@
 struct siginfo;
 void do_schedule_next_timer(struct siginfo *info);
 
-#ifndef HAVE_ARCH_COPY_SIGINFO
-
-#include <linux/string.h>
-
-static inline void copy_siginfo(struct siginfo *to, struct siginfo *from)
-{
-	if (from->si_code < 0)
-		memcpy(to, from, sizeof(*to));
-	else
-		/* _sigchld is currently the largest know union member */
-		memcpy(to, from, __ARCH_SI_PREAMBLE_SIZE + sizeof(from->_sifields._sigchld));
-}
-
-#endif
-
 extern int copy_siginfo_to_user(struct siginfo __user *to, const struct siginfo *from);
 
 #endif
--- a/include/linux/signal.h
+++ b/include/linux/signal.h
@@ -28,6 +28,21 @@ struct sigpending {
 	sigset_t signal;
 };
 
+#ifndef HAVE_ARCH_COPY_SIGINFO
+
+#include <linux/string.h>
+
+static inline void copy_siginfo(struct siginfo *to, struct siginfo *from)
+{
+	if (from->si_code < 0)
+		memcpy(to, from, sizeof(*to));
+	else
+		/* _sigchld is currently the largest know union member */
+		memcpy(to, from, __ARCH_SI_PREAMBLE_SIZE + sizeof(from->_sifields._sigchld));
+}
+
+#endif
+
 /*
  * Define some primitives to manipulate sigset_t.
  */