[PATCH 4.12 124/196] MIPS: Fix mips_atomic_set() retry condition

[PATCH 4.12 124/196] MIPS: Fix mips_atomic_set() retry condition

[Greg Kroah-Hartman]

4.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Hogan <james.hogan@imgtec.com>

commit 2ec420b26f7b6ff332393f0bb5a7d245f7ad87f0 upstream.

The inline asm retry check in the MIPS_ATOMIC_SET operation of the
sysmips system call has been backwards since commit f1e39a4a616c ("MIPS:
Rewrite sysmips(MIPS_ATOMIC_SET, ...) in C with inline assembler")
merged in v2.6.32, resulting in the non R10000_LLSC_WAR case retrying
until the operation was inatomic, before returning the new value that
was probably just written multiple times instead of the old value.

Invert the branch condition to fix that particular issue.

Fixes: f1e39a4a616c ("MIPS: Rewrite sysmips(MIPS_ATOMIC_SET, ...) in C with inline assembler")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16148/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/kernel/syscall.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -134,7 +134,7 @@ static inline int mips_atomic_set(unsign
 		"1:	ll	%[old], (%[addr])			\n"
 		"	move	%[tmp], %[new]				\n"
 		"2:	sc	%[tmp], (%[addr])			\n"
-		"	bnez	%[tmp], 4f				\n"
+		"	beqz	%[tmp], 4f				\n"
 		"3:							\n"
 		"	.insn						\n"
 		"	.subsection 2					\n"

[PATCH 4.12 125/196] MIPS: Fix mips_atomic_set() with EVA

[Greg Kroah-Hartman]

4.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Hogan <james.hogan@imgtec.com>

commit 4915e1b043d6286928207b1f6968197b50407294 upstream.

EVA linked loads (LLE) and conditional stores (SCE) should be used on
EVA kernels for the MIPS_ATOMIC_SET operation of the sysmips system
call, or else the atomic set will apply to the kernel view of the
virtual address space (potentially unmapped on EVA kernels) rather than
the user view (TLB mapped).

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16151/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/kernel/syscall.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -29,6 +29,7 @@
 #include <linux/sched/task_stack.h>
 
 #include <asm/asm.h>
+#include <asm/asm-eva.h>
 #include <asm/branch.h>
 #include <asm/cachectl.h>
 #include <asm/cacheflush.h>
@@ -131,9 +132,11 @@ static inline int mips_atomic_set(unsign
 		__asm__ __volatile__ (
 		"	.set	"MIPS_ISA_ARCH_LEVEL"			\n"
 		"	li	%[err], 0				\n"
-		"1:	ll	%[old], (%[addr])			\n"
+		"1:							\n"
+		user_ll("%[old]", "(%[addr])")
 		"	move	%[tmp], %[new]				\n"
-		"2:	sc	%[tmp], (%[addr])			\n"
+		"2:							\n"
+		user_sc("%[tmp]", "(%[addr])")
 		"	beqz	%[tmp], 4f				\n"
 		"3:							\n"
 		"	.insn						\n"

[PATCH 4.12 126/196] MIPS: Negate error syscall return in trace

[Greg Kroah-Hartman]

4.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Hogan <james.hogan@imgtec.com>

commit 4f32a39d49b25eaa66d2420f1f03d371ea4cd906 upstream.

The sys_exit trace event takes a single return value for the system
call, which MIPS passes the value of the $v0 (result) register, however
MIPS returns positive error codes in $v0 with $a3 specifying that $v0
contains an error code. As a result erroring system calls are traced
returning positive error numbers that can't always be distinguished from
success.

Use regs_return_value() to negate the error code if $a3 is set.

Fixes: 1d7bf993e073 ("MIPS: ftrace: Add support for syscall tracepoints.")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16651/
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/kernel/ptrace.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -895,7 +895,7 @@ asmlinkage void syscall_trace_leave(stru
 	audit_syscall_exit(regs);
 
 	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
-		trace_sys_exit(regs, regs->regs[2]);
+		trace_sys_exit(regs, regs_return_value(regs));
 
 	if (test_thread_flag(TIF_SYSCALL_TRACE))
 		tracehook_report_syscall_exit(regs, 0);

[PATCH 4.12 136/196] MIPS: Fix MIPS I ISA /proc/cpuinfo reporting

[Greg Kroah-Hartman]

4.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maciej W. Rozycki <macro@linux-mips.org>

commit e5f5a5b06e51a36f6ddf31a4a485358263953a3d upstream.

Correct a commit 515a6393dbac ("MIPS: kernel: proc: Add MIPS R6 support
to /proc/cpuinfo") regression that caused MIPS I systems to show no ISA
levels supported in /proc/cpuinfo, e.g.:

system type		: Digital DECstation 2100/3100
machine			: Unknown
processor		: 0
cpu model		: R3000 V2.0  FPU V2.0
BogoMIPS		: 10.69
wait instruction	: no
microsecond timers	: no
tlb_entries		: 64
extra interrupt vector	: no
hardware watchpoint	: no
isa			:
ASEs implemented	:
shadow register sets	: 1
kscratch registers	: 0
package			: 0
core			: 0
VCED exceptions		: not available
VCEI exceptions		: not available

and similarly exclude `mips1' from the ISA list for any processors below
MIPSr1.  This is because the condition to show `mips1' on has been made
`cpu_has_mips_r1' rather than newly-introduced `cpu_has_mips_1'.  Use
the correct condition then.

Fixes: 515a6393dbac ("MIPS: kernel: proc: Add MIPS R6 support to /proc/cpuinfo")
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16758/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/kernel/proc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/mips/kernel/proc.c
+++ b/arch/mips/kernel/proc.c
@@ -83,7 +83,7 @@ static int show_cpuinfo(struct seq_file
 	}
 
 	seq_printf(m, "isa\t\t\t:"); 
-	if (cpu_has_mips_r1)
+	if (cpu_has_mips_1)
 		seq_printf(m, " mips1");
 	if (cpu_has_mips_2)
 		seq_printf(m, "%s", " mips2");

[PATCH 4.12 137/196] MIPS: Save static registers before sysmips

[Greg Kroah-Hartman]

4.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Hogan <james.hogan@imgtec.com>

commit 49955d84cd9ccdca5a16a495e448e1a06fad9e49 upstream.

The MIPS sysmips system call handler may return directly from the
MIPS_ATOMIC_SET case (mips_atomic_set()) to syscall_exit. This path
restores the static (callee saved) registers, however they won't have
been saved on entry to the system call.

Use the save_static_function() macro to create a __sys_sysmips wrapper
function which saves the static registers before calling sys_sysmips, so
that the correct static register state is restored by syscall_exit.

Fixes: f1e39a4a616c ("MIPS: Rewrite sysmips(MIPS_ATOMIC_SET, ...) in C with inline assembler")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16149/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/kernel/scall32-o32.S |    2 +-
 arch/mips/kernel/scall64-64.S  |    2 +-
 arch/mips/kernel/scall64-n32.S |    2 +-
 arch/mips/kernel/scall64-o32.S |    2 +-
 arch/mips/kernel/syscall.c     |    6 ++++++
 5 files changed, 10 insertions(+), 4 deletions(-)

--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -371,7 +371,7 @@ EXPORT(sys_call_table)
 	PTR	sys_writev
 	PTR	sys_cacheflush
 	PTR	sys_cachectl
-	PTR	sys_sysmips
+	PTR	__sys_sysmips
 	PTR	sys_ni_syscall			/* 4150 */
 	PTR	sys_getsid
 	PTR	sys_fdatasync
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -311,7 +311,7 @@ EXPORT(sys_call_table)
 	PTR	sys_sched_getaffinity
 	PTR	sys_cacheflush
 	PTR	sys_cachectl
-	PTR	sys_sysmips
+	PTR	__sys_sysmips
 	PTR	sys_io_setup			/* 5200 */
 	PTR	sys_io_destroy
 	PTR	sys_io_getevents
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -302,7 +302,7 @@ EXPORT(sysn32_call_table)
 	PTR	compat_sys_sched_getaffinity
 	PTR	sys_cacheflush
 	PTR	sys_cachectl
-	PTR	sys_sysmips
+	PTR	__sys_sysmips
 	PTR	compat_sys_io_setup			/* 6200 */
 	PTR	sys_io_destroy
 	PTR	compat_sys_io_getevents
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -371,7 +371,7 @@ EXPORT(sys32_call_table)
 	PTR	compat_sys_writev
 	PTR	sys_cacheflush
 	PTR	sys_cachectl
-	PTR	sys_sysmips
+	PTR	__sys_sysmips
 	PTR	sys_ni_syscall			/* 4150 */
 	PTR	sys_getsid
 	PTR	sys_fdatasync
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -195,6 +195,12 @@ static inline int mips_atomic_set(unsign
 	unreachable();
 }
 
+/*
+ * mips_atomic_set() normally returns directly via syscall_exit potentially
+ * clobbering static registers, so be sure to preserve them.
+ */
+save_static_function(sys_sysmips);
+
 SYSCALL_DEFINE3(sysmips, long, cmd, long, arg1, long, arg2)
 {
 	switch (cmd) {

[PATCH 4.12 138/196] MIPS: Actually decode JALX in `__compute_return_epc_for_insn

[Greg Kroah-Hartman]

4.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maciej W. Rozycki <macro@imgtec.com>

commit a9db101b735a9d49295326ae41f610f6da62b08c upstream.

Complement commit fb6883e5809c ("MIPS: microMIPS: Support handling of
delay slots.") and actually decode the regular MIPS JALX major
instruction opcode, the handling of which has been added with the said
commit for EPC calculation in `__compute_return_epc_for_insn'.

Fixes: fb6883e5809c ("MIPS: microMIPS: Support handling of delay slots.")
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16394/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/kernel/branch.c |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/mips/kernel/branch.c
+++ b/arch/mips/kernel/branch.c
@@ -556,6 +556,7 @@ int __compute_return_epc_for_insn(struct
 	/*
 	 * These are unconditional and in j_format.
 	 */
+	case jalx_op:
 	case jal_op:
 		regs->regs[31] = regs->cp0_epc + 8;
 	case j_op:

[PATCH 4.12 139/196] MIPS: Fix unaligned PC interpretation in `compute_return_epc

[Greg Kroah-Hartman]

4.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maciej W. Rozycki <macro@imgtec.com>

commit 11a3799dbeb620bf0400b1fda5cc2c6bea55f20a upstream.

Fix a regression introduced with commit fb6883e5809c ("MIPS: microMIPS:
Support handling of delay slots.") and defer to `__compute_return_epc'
if the ISA bit is set in EPC with non-MIPS16, non-microMIPS hardware,
which will then arrange for a SIGBUS due to an unaligned instruction
reference.  Returning EPC here is never correct as the API defines this
function's result to be either a negative error code on failure or one
of 0 and BRANCH_LIKELY_TAKEN on success.

Fixes: fb6883e5809c ("MIPS: microMIPS: Support handling of delay slots.")
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16395/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/include/asm/branch.h |    5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

--- a/arch/mips/include/asm/branch.h
+++ b/arch/mips/include/asm/branch.h
@@ -74,10 +74,7 @@ static inline int compute_return_epc(str
 			return __microMIPS_compute_return_epc(regs);
 		if (cpu_has_mips16)
 			return __MIPS16e_compute_return_epc(regs);
-		return regs->cp0_epc;
-	}
-
-	if (!delay_slot(regs)) {
+	} else if (!delay_slot(regs)) {
 		regs->cp0_epc += 4;
 		return 0;
 	}

[PATCH 4.12 140/196] MIPS: math-emu: Prevent wrong ISA mode instruction emulation

[Greg Kroah-Hartman]

4.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maciej W. Rozycki <macro@imgtec.com>

commit 13769ebad0c42738831787e27c7c7f982e7da579 upstream.

Terminate FPU emulation immediately whenever an ISA mode switch has been
observed.  This is so that we do not interpret machine code in the wrong
mode, for example when a regular MIPS FPU instruction has been placed in
a delay slot of a jump that switches into the MIPS16 mode, as with the
following code (taken from a GCC test suite case):

00400650 <set_fast_math>:
  400650:	3c020100 	lui	v0,0x100
  400654:	03e00008 	jr	ra
  400658:	44c2f800 	ctc1	v0,c1_fcsr
  40065c:	00000000 	nop

[...]

004012d0 <__libc_csu_init>:
  4012d0:	f000 6a02 	li	v0,2
  4012d4:	f150 0b1c 	la	v1,3f9430 <_DYNAMIC-0x6df0>
  4012d8:	f400 3240 	sll	v0,16
  4012dc:	e269      	addu	v0,v1
  4012de:	659a      	move	gp,v0
  4012e0:	f00c 64f6 	save	a0-a2,48,ra,s0-s1
  4012e4:	673c      	move	s1,gp
  4012e6:	f010 9978 	lw	v1,-32744(s1)
  4012ea:	d204      	sw	v0,16(sp)
  4012ec:	eb40      	jalr	v1
  4012ee:	653b      	move	t9,v1
  4012f0:	f010 997c 	lw	v1,-32740(s1)
  4012f4:	f030 9920 	lw	s1,-32736(s1)
  4012f8:	e32f      	subu	v1,s1
  4012fa:	326b      	sra	v0,v1,2
  4012fc:	d206      	sw	v0,24(sp)
  4012fe:	220c      	beqz	v0,401318 <__libc_csu_init+0x48>
  401300:	6800      	li	s0,0
  401302:	99e0      	lw	a3,0(s1)
  401304:	4801      	addiu	s0,1
  401306:	960e      	lw	a2,56(sp)
  401308:	4904      	addiu	s1,4
  40130a:	950d      	lw	a1,52(sp)
  40130c:	940c      	lw	a0,48(sp)
  40130e:	ef40      	jalr	a3
  401310:	653f      	move	t9,a3
  401312:	9206      	lw	v0,24(sp)
  401314:	ea0a      	cmp	v0,s0
  401316:	61f5      	btnez	401302 <__libc_csu_init+0x32>
  401318:	6476      	restore	48,ra,s0-s1
  40131a:	e8a0      	jrc	ra

Here `set_fast_math' is called from `40130e' (`40130f' with the ISA bit)
and emulation triggers for the CTC1 instruction.  As it is in a jump
delay slot emulation continues from `401312' (`401313' with the ISA
bit).  However we have no path to handle MIPS16 FPU code emulation,
because there are no MIPS16 FPU instructions.  So the default emulation
path is taken, interpreting a 32-bit word fetched by `get_user' from
`401313' as a regular MIPS instruction, which is:

  401313:	f5ea0a92	sdc1	$f10,2706(t7)

This makes the FPU emulator proceed with the supposed SDC1 instruction
and consequently makes the program considered here terminate with
SIGSEGV.

A similar although less severe issue exists with pure-microMIPS
processors in the case where similarly an FPU instruction is emulated in
a delay slot of a register jump that (incorrectly) switches into the
regular MIPS mode.  A subsequent instruction fetch from the jump's
target is supposed to cause an Address Error exception, however instead
we proceed with regular MIPS FPU emulation.

For simplicity then, always terminate the emulation loop whenever a mode
change is detected, denoted by an ISA mode bit flip.  As from commit
377cb1b6c16a ("MIPS: Disable MIPS16/microMIPS crap for platforms not
supporting these ASEs.") the result of `get_isa16_mode' can be hardcoded
to 0, so we need to examine the ISA mode bit by hand.

This complements commit 102cedc32a6e ("MIPS: microMIPS: Floating point
support.") which added JALX decoding to FPU emulation.

Fixes: 102cedc32a6e ("MIPS: microMIPS: Floating point support.")
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16393/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/math-emu/cp1emu.c |   38 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

--- a/arch/mips/math-emu/cp1emu.c
+++ b/arch/mips/math-emu/cp1emu.c
@@ -2524,6 +2524,35 @@ dcopuop:
 	return 0;
 }
 
+/*
+ * Emulate FPU instructions.
+ *
+ * If we use FPU hardware, then we have been typically called to handle
+ * an unimplemented operation, such as where an operand is a NaN or
+ * denormalized.  In that case exit the emulation loop after a single
+ * iteration so as to let hardware execute any subsequent instructions.
+ *
+ * If we have no FPU hardware or it has been disabled, then continue
+ * emulating floating-point instructions until one of these conditions
+ * has occurred:
+ *
+ * - a non-FPU instruction has been encountered,
+ *
+ * - an attempt to emulate has ended with a signal,
+ *
+ * - the ISA mode has been switched.
+ *
+ * We need to terminate the emulation loop if we got switched to the
+ * MIPS16 mode, whether supported or not, so that we do not attempt
+ * to emulate a MIPS16 instruction as a regular MIPS FPU instruction.
+ * Similarly if we got switched to the microMIPS mode and only the
+ * regular MIPS mode is supported, so that we do not attempt to emulate
+ * a microMIPS instruction as a regular MIPS FPU instruction.  Or if
+ * we got switched to the regular MIPS mode and only the microMIPS mode
+ * is supported, so that we do not attempt to emulate a regular MIPS
+ * instruction that should cause an Address Error exception instead.
+ * For simplicity we always terminate upon an ISA mode switch.
+ */
 int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
 	int has_fpu, void *__user *fault_addr)
 {
@@ -2609,6 +2638,15 @@ int fpu_emulator_cop1Handler(struct pt_r
 			break;
 		if (sig)
 			break;
+		/*
+		 * We have to check for the ISA bit explicitly here,
+		 * because `get_isa16_mode' may return 0 if support
+		 * for code compression has been globally disabled,
+		 * or otherwise we may produce the wrong signal or
+		 * even proceed successfully where we must not.
+		 */
+		if ((xcp->cp0_epc ^ prevepc) & 0x1)
+			break;
 
 		cond_resched();
 	} while (xcp->cp0_epc > prevepc);

[PATCH 4.12 141/196] MIPS: Send SIGILL for BPOSGE32 in `__compute_return_epc_for_insn

[Greg Kroah-Hartman]

4.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maciej W. Rozycki <macro@imgtec.com>

commit 7b82c1058ac1f8f8b9f2b8786b1f710a57a870a8 upstream.

Fix commit e50c0a8fa60d ("Support the MIPS32 / MIPS64 DSP ASE.") and
send SIGILL rather than SIGBUS whenever an unimplemented BPOSGE32 DSP
ASE instruction has been encountered in `__compute_return_epc_for_insn'
as our Reserved Instruction exception handler would in response to an
attempt to actually execute the instruction.  Sending SIGBUS only makes
sense for the unaligned PC case, since moved to `__compute_return_epc'.
Adjust function documentation accordingly, correct formatting and use
`pr_info' rather than `printk' as the other exit path already does.

Fixes: e50c0a8fa60d ("Support the MIPS32 / MIPS64 DSP ASE.")
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16396/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/kernel/branch.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/arch/mips/kernel/branch.c
+++ b/arch/mips/kernel/branch.c
@@ -399,7 +399,7 @@ int __MIPS16e_compute_return_epc(struct
  *
  * @regs:	Pointer to pt_regs
  * @insn:	branch instruction to decode
- * @returns:	-EFAULT on error and forces SIGBUS, and on success
+ * @returns:	-EFAULT on error and forces SIGILL, and on success
  *		returns 0 or BRANCH_LIKELY_TAKEN as appropriate after
  *		evaluating the branch.
  *
@@ -832,8 +832,9 @@ int __compute_return_epc_for_insn(struct
 	return ret;
 
 sigill_dsp:
-	printk("%s: DSP branch but not DSP ASE - sending SIGBUS.\n", current->comm);
-	force_sig(SIGBUS, current);
+	pr_info("%s: DSP branch but not DSP ASE - sending SIGILL.\n",
+		current->comm);
+	force_sig(SIGILL, current);
 	return -EFAULT;
 sigill_r6:
 	pr_info("%s: R2 branch but r2-to-r6 emulator is not preset - sending SIGILL.\n",

[PATCH 4.12 142/196] MIPS: Rename `sigill_r6 to `sigill_r2r6 in `__compute_return_epc_for_insn

[Greg Kroah-Hartman]

4.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maciej W. Rozycki <macro@imgtec.com>

commit 1f4edde422961397cf4470b347958c13c6a740bb upstream.

Use the more accurate `sigill_r2r6' name for the label used in the case
of sending SIGILL in the absence of the instruction emulator for an
earlier ISA level instruction that has been removed as from the R6 ISA,
so that the `sigill_r6' name is freed for the situation where an R6
instruction is not supposed to be interpreted, because the executing
processor does not support the R6 ISA.

Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16397/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/kernel/branch.c |   16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

--- a/arch/mips/kernel/branch.c
+++ b/arch/mips/kernel/branch.c
@@ -431,7 +431,7 @@ int __compute_return_epc_for_insn(struct
 			/* Fall through */
 		case jr_op:
 			if (NO_R6EMU && insn.r_format.func == jr_op)
-				goto sigill_r6;
+				goto sigill_r2r6;
 			regs->cp0_epc = regs->regs[insn.r_format.rs];
 			break;
 		}
@@ -446,7 +446,7 @@ int __compute_return_epc_for_insn(struct
 		switch (insn.i_format.rt) {
 		case bltzl_op:
 			if (NO_R6EMU)
-				goto sigill_r6;
+				goto sigill_r2r6;
 		case bltz_op:
 			if ((long)regs->regs[insn.i_format.rs] < 0) {
 				epc = epc + 4 + (insn.i_format.simmediate << 2);
@@ -459,7 +459,7 @@ int __compute_return_epc_for_insn(struct
 
 		case bgezl_op:
 			if (NO_R6EMU)
-				goto sigill_r6;
+				goto sigill_r2r6;
 		case bgez_op:
 			if ((long)regs->regs[insn.i_format.rs] >= 0) {
 				epc = epc + 4 + (insn.i_format.simmediate << 2);
@@ -574,7 +574,7 @@ int __compute_return_epc_for_insn(struct
 	 */
 	case beql_op:
 		if (NO_R6EMU)
-			goto sigill_r6;
+			goto sigill_r2r6;
 	case beq_op:
 		if (regs->regs[insn.i_format.rs] ==
 		    regs->regs[insn.i_format.rt]) {
@@ -588,7 +588,7 @@ int __compute_return_epc_for_insn(struct
 
 	case bnel_op:
 		if (NO_R6EMU)
-			goto sigill_r6;
+			goto sigill_r2r6;
 	case bne_op:
 		if (regs->regs[insn.i_format.rs] !=
 		    regs->regs[insn.i_format.rt]) {
@@ -602,7 +602,7 @@ int __compute_return_epc_for_insn(struct
 
 	case blezl_op: /* not really i_format */
 		if (!insn.i_format.rt && NO_R6EMU)
-			goto sigill_r6;
+			goto sigill_r2r6;
 	case blez_op:
 		/*
 		 * Compact branches for R6 for the
@@ -637,7 +637,7 @@ int __compute_return_epc_for_insn(struct
 
 	case bgtzl_op:
 		if (!insn.i_format.rt && NO_R6EMU)
-			goto sigill_r6;
+			goto sigill_r2r6;
 	case bgtz_op:
 		/*
 		 * Compact branches for R6 for the
@@ -836,7 +836,7 @@ sigill_dsp:
 		current->comm);
 	force_sig(SIGILL, current);
 	return -EFAULT;
-sigill_r6:
+sigill_r2r6:
 	pr_info("%s: R2 branch but r2-to-r6 emulator is not preset - sending SIGILL.\n",
 		current->comm);
 	force_sig(SIGILL, current);

[PATCH 4.12 143/196] MIPS: Send SIGILL for linked branches in `__compute_return_epc_for_insn

[Greg Kroah-Hartman]

4.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maciej W. Rozycki <macro@imgtec.com>

commit fef40be6da856afead4177aaa9d869a66fb3381f upstream.

Fix commit 319824eabc3f ("MIPS: kernel: branch: Do not emulate the
branch likelies on MIPS R6") and also send SIGILL rather than returning
-SIGILL for BLTZAL, BLTZALL, BGEZAL and BGEZALL instruction encodings no
longer supported in R6, except where emulated.  Returning -SIGILL is
never correct as the API defines this function's result upon error to be
-EFAULT and a signal actually issued.

Fixes: 319824eabc3f ("MIPS: kernel: branch: Do not emulate the branch likelies on MIPS R6")
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16398/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/kernel/branch.c |   12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

--- a/arch/mips/kernel/branch.c
+++ b/arch/mips/kernel/branch.c
@@ -473,10 +473,8 @@ int __compute_return_epc_for_insn(struct
 		case bltzal_op:
 		case bltzall_op:
 			if (NO_R6EMU && (insn.i_format.rs ||
-			    insn.i_format.rt == bltzall_op)) {
-				ret = -SIGILL;
-				break;
-			}
+			    insn.i_format.rt == bltzall_op))
+				goto sigill_r2r6;
 			regs->regs[31] = epc + 8;
 			/*
 			 * OK we are here either because we hit a NAL
@@ -507,10 +505,8 @@ int __compute_return_epc_for_insn(struct
 		case bgezal_op:
 		case bgezall_op:
 			if (NO_R6EMU && (insn.i_format.rs ||
-			    insn.i_format.rt == bgezall_op)) {
-				ret = -SIGILL;
-				break;
-			}
+			    insn.i_format.rt == bgezall_op))
+				goto sigill_r2r6;
 			regs->regs[31] = epc + 8;
 			/*
 			 * OK we are here either because we hit a BAL

[PATCH 4.12 144/196] MIPS: Send SIGILL for R6 branches in `__compute_return_epc_for_insn

[Greg Kroah-Hartman]

4.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maciej W. Rozycki <macro@imgtec.com>

commit a60b1a5bf88a250f1a77977c0224e502c901c77b upstream.

Fix:

* commit 8467ca0122e2 ("MIPS: Emulate the new MIPS R6 branch compact
(BC) instruction"),

* commit 84fef630127a ("MIPS: Emulate the new MIPS R6 BALC
instruction"),

* commit 69b9a2fd05a3 ("MIPS: Emulate the new MIPS R6 BEQZC and JIC
instructions"),

* commit 28d6f93d201d ("MIPS: Emulate the new MIPS R6 BNEZC and JIALC
instructions"),

* commit c893ce38b265 ("MIPS: Emulate the new MIPS R6 BOVC, BEQC and
BEQZALC instructions")

and send SIGILL rather than returning -SIGILL for R6 branch and jump
instructions.  Returning -SIGILL is never correct as the API defines
this function's result upon error to be -EFAULT and a signal actually
issued.

Fixes: 8467ca0122e2 ("MIPS: Emulate the new MIPS R6 branch compact (BC) instruction")
Fixes: 84fef630127a ("MIPS: Emulate the new MIPS R6 BALC instruction")
Fixes: 69b9a2fd05a3 ("MIPS: Emulate the new MIPS R6 BEQZC and JIC instructions")
Fixes: 28d6f93d201d ("MIPS: Emulate the new MIPS R6 BNEZC and JIALC instructions")
Fixes: c893ce38b265 ("MIPS: Emulate the new MIPS R6 BOVC, BEQC and BEQZALC instructions")
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16399/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/kernel/branch.c |   35 +++++++++++++++--------------------
 1 file changed, 15 insertions(+), 20 deletions(-)

--- a/arch/mips/kernel/branch.c
+++ b/arch/mips/kernel/branch.c
@@ -771,35 +771,27 @@ int __compute_return_epc_for_insn(struct
 #else
 	case bc6_op:
 		/* Only valid for MIPS R6 */
-		if (!cpu_has_mips_r6) {
-			ret = -SIGILL;
-			break;
-		}
+		if (!cpu_has_mips_r6)
+			goto sigill_r6;
 		regs->cp0_epc += 8;
 		break;
 	case balc6_op:
-		if (!cpu_has_mips_r6) {
-			ret = -SIGILL;
-			break;
-		}
+		if (!cpu_has_mips_r6)
+			goto sigill_r6;
 		/* Compact branch: BALC */
 		regs->regs[31] = epc + 4;
 		epc += 4 + (insn.i_format.simmediate << 2);
 		regs->cp0_epc = epc;
 		break;
 	case pop66_op:
-		if (!cpu_has_mips_r6) {
-			ret = -SIGILL;
-			break;
-		}
+		if (!cpu_has_mips_r6)
+			goto sigill_r6;
 		/* Compact branch: BEQZC || JIC */
 		regs->cp0_epc += 8;
 		break;
 	case pop76_op:
-		if (!cpu_has_mips_r6) {
-			ret = -SIGILL;
-			break;
-		}
+		if (!cpu_has_mips_r6)
+			goto sigill_r6;
 		/* Compact branch: BNEZC || JIALC */
 		if (!insn.i_format.rs) {
 			/* JIALC: set $31/ra */
@@ -811,10 +803,8 @@ int __compute_return_epc_for_insn(struct
 	case pop10_op:
 	case pop30_op:
 		/* Only valid for MIPS R6 */
-		if (!cpu_has_mips_r6) {
-			ret = -SIGILL;
-			break;
-		}
+		if (!cpu_has_mips_r6)
+			goto sigill_r6;
 		/*
 		 * Compact branches:
 		 * bovc, beqc, beqzalc, bnvc, bnec, bnezlac
@@ -837,6 +827,11 @@ sigill_r2r6:
 		current->comm);
 	force_sig(SIGILL, current);
 	return -EFAULT;
+sigill_r6:
+	pr_info("%s: R6 branch but no MIPSr6 ISA support - sending SIGILL.\n",
+		current->comm);
+	force_sig(SIGILL, current);
+	return -EFAULT;
 }
 EXPORT_SYMBOL_GPL(__compute_return_epc_for_insn);
 

[PATCH 4.12 145/196] MIPS: Fix a typo: s/preset/present/ in r2-to-r6 emulation error message

[Greg Kroah-Hartman]

4.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maciej W. Rozycki <macro@imgtec.com>

commit 27fe2200dad2de8207a694024a7b9037dff1b280 upstream.

This is a user-visible message, so we want it to be spelled correctly.

Fixes: 5f9f41c474be ("MIPS: kernel: Prepare the JR instruction for emulation on MIPS R6")
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16400/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/kernel/branch.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/mips/kernel/branch.c
+++ b/arch/mips/kernel/branch.c
@@ -823,7 +823,7 @@ sigill_dsp:
 	force_sig(SIGILL, current);
 	return -EFAULT;
 sigill_r2r6:
-	pr_info("%s: R2 branch but r2-to-r6 emulator is not preset - sending SIGILL.\n",
+	pr_info("%s: R2 branch but r2-to-r6 emulator is not present - sending SIGILL.\n",
 		current->comm);
 	force_sig(SIGILL, current);
 	return -EFAULT;