[PATCH 4.14 078/140] MIPS: BMIPS: Do not mask IPIs during suspend

[PATCH 4.14 078/140] MIPS: BMIPS: Do not mask IPIs during suspend

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Justin Chen <justinpopo6@gmail.com>

commit 06a3f0c9f2725f5d7c63c4203839373c9bd00c28 upstream.

Commit a3e6c1eff548 ("MIPS: IRQ: Fix disable_irq on CPU IRQs") fixes an
issue where disable_irq did not actually disable the irq. The bug caused
our IPIs to not be disabled, which actually is the correct behavior.

With the addition of commit a3e6c1eff548 ("MIPS: IRQ: Fix disable_irq on
CPU IRQs"), the IPIs were getting disabled going into suspend, thus
schedule_ipi() was not being called. This caused deadlocks where
schedulable task were not being scheduled and other cpus were waiting
for them to do something.

Add the IRQF_NO_SUSPEND flag so an irq_disable will not be called on the
IPIs during suspend.

Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Fixes: a3e6c1eff548 ("MIPS: IRQ: Fix disabled_irq on CPU IRQs")
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17385/
[jhogan@kernel.org: checkpatch: wrap long lines and fix commit refs]
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/kernel/smp-bmips.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/arch/mips/kernel/smp-bmips.c
+++ b/arch/mips/kernel/smp-bmips.c
@@ -168,11 +168,11 @@ static void bmips_prepare_cpus(unsigned
 		return;
 	}
 
-	if (request_irq(IPI0_IRQ, bmips_ipi_interrupt, IRQF_PERCPU,
-			"smp_ipi0", NULL))
+	if (request_irq(IPI0_IRQ, bmips_ipi_interrupt,
+			IRQF_PERCPU | IRQF_NO_SUSPEND, "smp_ipi0", NULL))
 		panic("Can't request IPI0 interrupt");
-	if (request_irq(IPI1_IRQ, bmips_ipi_interrupt, IRQF_PERCPU,
-			"smp_ipi1", NULL))
+	if (request_irq(IPI1_IRQ, bmips_ipi_interrupt,
+			IRQF_PERCPU | IRQF_NO_SUSPEND, "smp_ipi1", NULL))
 		panic("Can't request IPI1 interrupt");
 }
 

[PATCH 4.14 079/140] MIPS: ath25: Check for kzalloc allocation failure

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Colin Ian King <colin.king@canonical.com>

commit 1b22b4b28fd5fbc51855219e3238b3ab81da8466 upstream.

Currently there is no null check on a failed allocation of board_data,
and hence a null pointer dereference will occurr. Fix this by checking
for the out of memory null pointer.

Fixes: a7473717483e ("MIPS: ath25: add board configuration detection")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.19+
Patchwork: https://patchwork.linux-mips.org/patch/18657/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/ath25/board.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/mips/ath25/board.c
+++ b/arch/mips/ath25/board.c
@@ -135,6 +135,8 @@ int __init ath25_find_config(phys_addr_t
 	}
 
 	board_data = kzalloc(BOARD_CONFIG_BUFSZ, GFP_KERNEL);
+	if (!board_data)
+		goto error;
 	ath25_board.config = (struct ath25_boarddata *)board_data;
 	memcpy_fromio(board_data, bcfg, 0x100);
 	if (broken_boarddata) {

[PATCH 4.14 080/140] MIPS: OCTEON: irq: Check for null return on kzalloc allocation

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Colin Ian King <colin.king@canonical.com>

commit 902f4d067a50ccf645a58dd5fb1d113b6e0f9b5b upstream.

The allocation of host_data is not null checked, leading to a null
pointer dereference if the allocation fails. Fix this by adding a null
check and return with -ENOMEM.

Fixes: 64b139f97c01 ("MIPS: OCTEON: irq: add CIB and other fixes")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: David Daney <david.daney@cavium.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: "Steven J. Hill" <Steven.Hill@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.0+
Patchwork: https://patchwork.linux-mips.org/patch/18658/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/cavium-octeon/octeon-irq.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/mips/cavium-octeon/octeon-irq.c
+++ b/arch/mips/cavium-octeon/octeon-irq.c
@@ -2277,6 +2277,8 @@ static int __init octeon_irq_init_cib(st
 	}
 
 	host_data = kzalloc(sizeof(*host_data), GFP_KERNEL);
+	if (!host_data)
+		return -ENOMEM;
 	raw_spin_lock_init(&host_data->lock);
 
 	addr = of_get_address(ciu_node, 0, NULL, NULL);

[PATCH 4.14 113/140] dt-bindings: Document mti,mips-cpc binding

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paul Burton <paul.burton@mips.com>

commit aece34cd576c7625181b0488a8129c1e165355f7 upstream.

Document a binding for the MIPS Cluster Power Controller (CPC) that
allows the device tree to specify where the CPC registers are located.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/18512/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/devicetree/bindings/power/mti,mips-cpc.txt |    8 ++++++++
 MAINTAINERS                                              |    1 +
 2 files changed, 9 insertions(+)

--- /dev/null
+++ b/Documentation/devicetree/bindings/power/mti,mips-cpc.txt
@@ -0,0 +1,8 @@
+Binding for MIPS Cluster Power Controller (CPC).
+
+This binding allows a system to specify where the CPC registers are
+located.
+
+Required properties:
+compatible : Should be "mti,mips-cpc".
+regs: Should describe the address & size of the CPC register region.
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9001,6 +9001,7 @@ MIPS GENERIC PLATFORM
 M:	Paul Burton <paul.burton@mips.com>
 L:	linux-mips@linux-mips.org
 S:	Supported
+F:	Documentation/devicetree/bindings/power/mti,mips-cpc.txt
 F:	arch/mips/generic/
 F:	arch/mips/tools/generic-board-config.sh
 

[PATCH 4.14 114/140] MIPS: CPC: Map registers using DT in mips_cpc_default_phys_base()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paul Burton <paul.burton@mips.com>

commit 791412dafbbfd860e78983d45cf71db603a82f67 upstream.

Reading mips_cpc_base value from the DT allows each platform to
define it according to its needs. This is especially convenient
for MIPS_GENERIC kernel where this kind of information should be
determined in runtime.

Use mti,mips-cpc compatible string with just a reg property to
specify the register location for your platform.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Miodrag Dinic <miodrag.dinic@mips.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com>
Cc: linux-mips@linux-mips.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/18513/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/kernel/mips-cpc.c |   13 +++++++++++++
 1 file changed, 13 insertions(+)

--- a/arch/mips/kernel/mips-cpc.c
+++ b/arch/mips/kernel/mips-cpc.c
@@ -10,6 +10,8 @@
 
 #include <linux/errno.h>
 #include <linux/percpu.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/spinlock.h>
 
 #include <asm/mips-cps.h>
@@ -22,6 +24,17 @@ static DEFINE_PER_CPU_ALIGNED(unsigned l
 
 phys_addr_t __weak mips_cpc_default_phys_base(void)
 {
+	struct device_node *cpc_node;
+	struct resource res;
+	int err;
+
+	cpc_node = of_find_compatible_node(of_root, NULL, "mti,mips-cpc");
+	if (cpc_node) {
+		err = of_address_to_resource(cpc_node, 0, &res);
+		if (!err)
+			return res.start;
+	}
+
 	return 0;
 }