[PATCH 4.4 062/134] MIPS: BPF: Quit clobbering callee saved registers in JIT code.

[PATCH 4.4 062/134] MIPS: BPF: Quit clobbering callee saved registers in JIT code.

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Daney <david.daney@cavium.com>


[ Upstream commit 1ef0910cfd681f0bd0b81f8809935b2006e9cfb9 ]

If bpf_needs_clear_a() returns true, only actually clear it if it is
ever used.  If it is not used, we don't save and restore it, so the
clearing has the nasty side effect of clobbering caller state.

Also, don't emit stack pointer adjustment instructions if the
adjustment amount is zero.

Signed-off-by: David Daney <david.daney@cavium.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Steven J. Hill <steven.hill@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15745/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/mips/net/bpf_jit.c |   16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

--- a/arch/mips/net/bpf_jit.c
+++ b/arch/mips/net/bpf_jit.c
@@ -527,7 +527,8 @@ static void save_bpf_jit_regs(struct jit
 	u32 sflags, tmp_flags;
 
 	/* Adjust the stack pointer */
-	emit_stack_offset(-align_sp(offset), ctx);
+	if (offset)
+		emit_stack_offset(-align_sp(offset), ctx);
 
 	tmp_flags = sflags = ctx->flags >> SEEN_SREG_SFT;
 	/* sflags is essentially a bitmap */
@@ -579,7 +580,8 @@ static void restore_bpf_jit_regs(struct
 		emit_load_stack_reg(r_ra, r_sp, real_off, ctx);
 
 	/* Restore the sp and discard the scrach memory */
-	emit_stack_offset(align_sp(offset), ctx);
+	if (offset)
+		emit_stack_offset(align_sp(offset), ctx);
 }
 
 static unsigned int get_stack_depth(struct jit_ctx *ctx)
@@ -626,8 +628,14 @@ static void build_prologue(struct jit_ct
 	if (ctx->flags & SEEN_X)
 		emit_jit_reg_move(r_X, r_zero, ctx);
 
-	/* Do not leak kernel data to userspace */
-	if (bpf_needs_clear_a(&ctx->skf->insns[0]))
+	/*
+	 * Do not leak kernel data to userspace, we only need to clear
+	 * r_A if it is ever used.  In fact if it is never used, we
+	 * will not save/restore it, so clearing it in this case would
+	 * corrupt the state of the caller.
+	 */
+	if (bpf_needs_clear_a(&ctx->skf->insns[0]) &&
+	    (ctx->flags & SEEN_A))
 		emit_jit_reg_move(r_A, r_zero, ctx);
 }
 

[PATCH 4.4 063/134] MIPS: BPF: Fix multiple problems in JIT skb access helpers.

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Daney <david.daney@cavium.com>


[ Upstream commit a81507c79f4ae9a0f9fb1054b59b62a090620dd9 ]

o Socket data is unsigned, so use unsigned accessors instructions.

 o Fix path result pointer generation arithmetic.

 o Fix half-word byte swapping code for unsigned semantics.

Signed-off-by: David Daney <david.daney@cavium.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Steven J. Hill <steven.hill@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15747/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/mips/net/bpf_jit_asm.S |   23 ++++++++++++-----------
 1 file changed, 12 insertions(+), 11 deletions(-)

--- a/arch/mips/net/bpf_jit_asm.S
+++ b/arch/mips/net/bpf_jit_asm.S
@@ -90,18 +90,14 @@ FEXPORT(sk_load_half_positive)
 	is_offset_in_header(2, half)
 	/* Offset within header boundaries */
 	PTR_ADDU t1, $r_skb_data, offset
-	.set	reorder
-	lh	$r_A, 0(t1)
-	.set	noreorder
+	lhu	$r_A, 0(t1)
 #ifdef CONFIG_CPU_LITTLE_ENDIAN
 # if defined(__mips_isa_rev) && (__mips_isa_rev >= 2)
-	wsbh	t0, $r_A
-	seh	$r_A, t0
+	wsbh	$r_A, $r_A
 # else
-	sll	t0, $r_A, 24
-	andi	t1, $r_A, 0xff00
-	sra	t0, t0, 16
-	srl	t1, t1, 8
+	sll	t0, $r_A, 8
+	srl	t1, $r_A, 8
+	andi	t0, t0, 0xff00
 	or	$r_A, t0, t1
 # endif
 #endif
@@ -115,7 +111,7 @@ FEXPORT(sk_load_byte_positive)
 	is_offset_in_header(1, byte)
 	/* Offset within header boundaries */
 	PTR_ADDU t1, $r_skb_data, offset
-	lb	$r_A, 0(t1)
+	lbu	$r_A, 0(t1)
 	jr	$r_ra
 	 move	$r_ret, zero
 	END(sk_load_byte)
@@ -139,6 +135,11 @@ FEXPORT(sk_load_byte_positive)
  * (void *to) is returned in r_s0
  *
  */
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+#define DS_OFFSET(SIZE) (4 * SZREG)
+#else
+#define DS_OFFSET(SIZE) ((4 * SZREG) + (4 - SIZE))
+#endif
 #define bpf_slow_path_common(SIZE)				\
 	/* Quick check. Are we within reasonable boundaries? */ \
 	LONG_ADDIU	$r_s1, $r_skb_len, -SIZE;		\
@@ -150,7 +151,7 @@ FEXPORT(sk_load_byte_positive)
 	PTR_LA		t0, skb_copy_bits;			\
 	PTR_S		$r_ra, (5 * SZREG)($r_sp);		\
 	/* Assign low slot to a2 */				\
-	move		a2, $r_sp;				\
+	PTR_ADDIU	a2, $r_sp, DS_OFFSET(SIZE);		\
 	jalr		t0;					\
 	/* Reset our destination slot (DS but it's ok) */	\
 	 INT_S		zero, (4 * SZREG)($r_sp);		\

[PATCH 4.4 064/134] MIPS: r2-on-r6-emu: Fix BLEZL and BGTZL identification

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>


[ Upstream commit 5bba7aa4958e271c3ffceb70d47d3206524cf489 ]

Fix the problem of inaccurate identification of instructions BLEZL and
BGTZL in R2 emulation code by making sure all necessary encoding
specifications are met.

Previously, certain R6 instructions could be identified as BLEZL or
BGTZL. R2 emulation routine didn't take into account that both BLEZL
and BGTZL instructions require their rt field (bits 20 to 16 of
instruction encoding) to be 0, and that, at same time, if the value in
that field is not 0, the encoding may represent a legitimate MIPS R6
instruction.

This means that a problem could occur after emulation optimization,
when emulation routine tried to pipeline emulation, picked up a next
candidate, and subsequently misrecognized an R6 instruction as BLEZL
or BGTZL.

It should be said that for single pass strategy, the problem does not
happen because CPU doesn't trap on branch-compacts which share opcode
space with BLEZL/BGTZL (but have rt field != 0, of course).

Signed-off-by: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtech.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtech.com>
Reported-by: Douglas Leung <douglas.leung@imgtec.com>
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Cc: james.hogan@imgtec.com
Cc: petar.jovanovic@imgtec.com
Cc: goran.ferenc@imgtec.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15456/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/mips/kernel/mips-r2-to-r6-emul.c |   14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

--- a/arch/mips/kernel/mips-r2-to-r6-emul.c
+++ b/arch/mips/kernel/mips-r2-to-r6-emul.c
@@ -1097,10 +1097,20 @@ repeat:
 		}
 		break;
 
-	case beql_op:
-	case bnel_op:
 	case blezl_op:
 	case bgtzl_op:
+		/*
+		 * For BLEZL and BGTZL, rt field must be set to 0. If this
+		 * is not the case, this may be an encoding of a MIPS R6
+		 * instruction, so return to CPU execution if this occurs
+		 */
+		if (MIPSInst_RT(inst)) {
+			err = SIGILL;
+			break;
+		}
+		/* fall through */
+	case beql_op:
+	case bnel_op:
 		if (delay_slot(regs)) {
 			err = SIGILL;
 			break;

[PATCH 4.4 065/134] MIPS: r2-on-r6-emu: Clear BLTZALL and BGEZALL debugfs counters

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Aleksandar Markovic <aleksandar.markovic@imgtec.com>


[ Upstream commit 411dac79cc2ed80f7e348ccc23eb4d8b0ba9f6d5 ]

Add missing clearing of BLTZALL and BGEZALL emulation counters in
function mipsr2_stats_clear_show().

Previously, it was not possible to reset BLTZALL and BGEZALL
emulation counters - their value remained the same even after
explicit request via debugfs. As far as other related counters
are concerned, they all seem to be properly cleared.

This change affects debugfs operation only, core R2 emulation
functionality is not affected.

Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Cc: james.hogan@imgtec.com
Cc: leonid.yegoshin@imgtec.com
Cc: douglas.leung@imgtec.com
Cc: petar.jovanovic@imgtec.com
Cc: miodrag.dinic@imgtec.com
Cc: goran.ferenc@imgtec.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15517/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/mips/kernel/mips-r2-to-r6-emul.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/mips/kernel/mips-r2-to-r6-emul.c
+++ b/arch/mips/kernel/mips-r2-to-r6-emul.c
@@ -2340,6 +2340,8 @@ static int mipsr2_stats_clear_show(struc
 	__this_cpu_write((mipsr2bremustats).bgezl, 0);
 	__this_cpu_write((mipsr2bremustats).bltzll, 0);
 	__this_cpu_write((mipsr2bremustats).bgezll, 0);
+	__this_cpu_write((mipsr2bremustats).bltzall, 0);
+	__this_cpu_write((mipsr2bremustats).bgezall, 0);
 	__this_cpu_write((mipsr2bremustats).bltzal, 0);
 	__this_cpu_write((mipsr2bremustats).bgezal, 0);
 	__this_cpu_write((mipsr2bremustats).beql, 0);