Re: which 2.6 kernel can be run on db1550?

[rolf liu <rolfliu@gmail.com>]

Thanks very much for the information.

SDE is the toolchain from mips, which is based on gcc 2.96.

I'll try 2.6.11 then


On 6/23/05, Clem Taylor <clem.taylor@gmail.com> wrote:
> On 6/23/05, rolf liu <rolfliu@gmail.com> wrote:
> > I just compiled 2.4.31 and run that on db1550. It works through a NFS
> > root file system. I am thinking of running of 2.6 on db1550.
> 
> I haven't switched over to 2.6.12, but I'm running 2.6.11 (checked out
> from linux-mips on 2005.03.18) on a Au1550 based board. When I was
> porting to my hardware, the default kernel worked just fine on the
> DBAu1550. I'm using gcc 3.4.3 and 2.15.94.0.2.2 bintools.
> 
> > Which one can be compiled by SDE and run this box?
> 
> I'm not sure what SDE is. I used buildroot to compile my toolchain and
> make my root image.
> 
> > I tried 2.6.12 and tried 2.6.12-rc6, but got no luck. They just don't compile.
> 
> I haven't had a chance to try 2.6.12 yet.
> 
>                                --Clem
>