Linux MIPS Architecture development
 help / color / mirror / Atom feed
From: Chad Carlin <chad@roctane.dallas.sgi.com>
To: linux@cthulhu.engr.sgi.com
Subject: New to Linux
Date: Mon, 23 Nov 1998 14:38:37 -0600	[thread overview]
Message-ID: <3659C7CD.1B134991@roctane.dallas.sgi.com> (raw)
In-Reply-To: 19981105031325.P359@uni-koblenz.de

Help.

Here is what I have:
Indy: R4k indy w/ a 1GB and a 500MB disk. I have an external 9GB from my
other system that I am temorarily (I hope) using to boot IRIX on my Linux
Indy.

Software:
Linux-installer-0.2.tar
root-be-0.04.cpio
SRPMS
vmlinux-indy-2.1.99.tar.gz
instructions

I read the instructions. The one with all of the tftp and nfs setup. Is
this for after I boot Linux, so I can install the rest of the software?
BTW I tested this by booting miniroot from my other Indy.

I also read the INSTALL instructions. I was able to successfully: ./mke2fs
drive, ./installer drive,  cjwsh> MAKEDEV, cpio root-be-0.04.cpio, and
./e2fsck -fy drive. Finally I did the, gzip -dc vmlinux.gz > /vmlinux. All
of this went OK.

It's the "boot vmlinux root=/dev/sda0" that makes the indy panic! Do I do
this from PROM or sash? I don't think that I can read the efs filesystem
without sash. Is there a better way to determine what device my e2fs root
filesystem is at?

Tell me if I'm getting this proceedure right.

1)Boot vmlinux kernel and mount e2fs filesystem as /.
2)Use tftp to install the stuff that I downloaded in the SRPMS directory.
3)Somehow I will end up with a system that can boot without having IRIX on
a local disk.

BTW is there anyway to mount this e2fs filesystem from with IRIX?

Thanks for any and all input. Flame me if you must.
Chad

      reply	other threads:[~1998-11-23 20:39 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
1998-10-31  2:28 Linus is down ? (fwd) Ariel Faigon
1998-10-31  2:28 ` Ariel Faigon
1998-11-05  2:13 ` ralf
1998-11-23 20:38   ` Chad Carlin [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3659C7CD.1B134991@roctane.dallas.sgi.com \
    --to=chad@roctane.dallas.sgi.com \
    --cc=chad@sgi.com \
    --cc=linux@cthulhu.engr.sgi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox