From: Jun Sun <jsun@mvista.com>
To: Ralf Baechle <ralf@uni-koblenz.de>, linux-mips@oss.sgi.com
Subject: [PATCH] make PIIX4 ide driver available for MIPS
Date: Tue, 23 Jul 2002 17:09:50 -0700 [thread overview]
Message-ID: <3D3DF04E.7070401@mvista.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 190 bytes --]
Malta uses this chip. The native driver does provide significant gain in
performance. See attached bonnie++ test results.
Two separate patches for both linux_2_4 branch and trunk.
Jun
[-- Attachment #2: 2002.07.23-make-PIIX-IDE-avaiable-for-mips.patch --]
[-- Type: text/plain, Size: 919 bytes --]
diff -Nru link/drivers/ide/Config.in.orig link/drivers/ide/Config.in
--- link/drivers/ide/Config.in.orig Wed Jun 26 15:35:44 2002
+++ link/drivers/ide/Config.in Tue Jul 23 17:03:44 2002
@@ -72,7 +72,7 @@
dep_bool ' HPT34X chipset support' CONFIG_BLK_DEV_HPT34X $CONFIG_BLK_DEV_IDEDMA_PCI
dep_mbool ' HPT34X AUTODMA support (WIP)' CONFIG_HPT34X_AUTODMA $CONFIG_BLK_DEV_HPT34X $CONFIG_IDEDMA_PCI_WIP
dep_bool ' HPT366/368/370 chipset support' CONFIG_BLK_DEV_HPT366 $CONFIG_BLK_DEV_IDEDMA_PCI
- if [ "$CONFIG_X86" = "y" -o "$CONFIG_IA64" = "y" ]; then
+ if [ "$CONFIG_X86" = "y" -o "$CONFIG_IA64" = "y" -o "$CONFIG_MIPS" = "y" -o "$CONFIG_MIPS64" = "y" ]; then
dep_mbool ' Intel PIIXn chipsets support' CONFIG_BLK_DEV_PIIX $CONFIG_BLK_DEV_IDEDMA_PCI
dep_mbool ' PIIXn Tuning support' CONFIG_PIIX_TUNING $CONFIG_BLK_DEV_PIIX $CONFIG_IDEDMA_PCI_AUTO
fi
[-- Attachment #3: 2002.07.23-2.5-make-PIIX-IDE-avaiable-for-mips.patch --]
[-- Type: text/plain, Size: 911 bytes --]
diff -Nru link/drivers/ide/Config.in.orig link/drivers/ide/Config.in
--- link/drivers/ide/Config.in.orig Wed Jul 10 14:04:49 2002
+++ link/drivers/ide/Config.in Tue Jul 23 17:06:55 2002
@@ -70,7 +70,7 @@
dep_bool ' HPT34X chipset support' CONFIG_BLK_DEV_HPT34X $CONFIG_BLK_DEV_IDEDMA_PCI
dep_mbool ' HPT34X AUTODMA support (WIP)' CONFIG_HPT34X_AUTODMA $CONFIG_BLK_DEV_HPT34X $CONFIG_IDEDMA_PCI_WIP
dep_bool ' HPT366 chipset support' CONFIG_BLK_DEV_HPT366 $CONFIG_BLK_DEV_IDEDMA_PCI
- if [ "$CONFIG_X86" = "y" -o "$CONFIG_IA64" = "y" ]; then
+ if [ "$CONFIG_X86" = "y" -o "$CONFIG_IA64" = "y" -o "$CONFIG_MIPS" = "y" -o "$CONFIG_MIPS64" = "y" ]; then
dep_mbool ' Intel PIIXn chipsets support' CONFIG_BLK_DEV_PIIX $CONFIG_BLK_DEV_IDEDMA_PCI
dep_mbool ' PIIXn Tuning support' CONFIG_PIIX_TUNING $CONFIG_BLK_DEV_PIIX $CONFIG_IDEDMA_PCI_AUTO
fi
[-- Attachment #4: junk --]
[-- Type: text/plain, Size: 2659 bytes --]
==========================
. bonnie++ test:
With PIIX4 controller code and turnning
---------------------------------------
Version 1.92 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
10.0.18.6 300M 44 99 4969 73 2875 65 65 99 5219 70 117.0 20
Latency 186ms 342ms 476ms 138ms 12186us 2550ms
Version 1.92 ------Sequential Create------ --------Random Create--------
10.0.18.6 -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
16 83 99 1677 100 1158 98 87 99 1849 100 302 98
Latency 25192us 2257us 2009us 45175us 1163us 9985us
With PIIX4 controller code:
--------------------------
Version 1.92 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
10.0.18.6 300M 44 99 4548 67 2517 56 65 99 5019 69 114.1 20
Latency 186ms 436ms 1652ms 147ms 14697us 2418ms
Version 1.92 ------Sequential Create------ --------Random Create--------
10.0.18.6 -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
16 83 99 1663 99 1141 98 87 99 1819 100 304 98
Latency 32274us 1690us 2826us 37199us 1157us 10074us
Use PCI generic code
--------------------
Version 1.92 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
10.0.18.6 300M 44 99 2433 35 1201 26 64 98 3101 44 85.5 14
Latency 186ms 4190ms 2722ms 168ms 40544us 1922ms
Version 1.92 ------Sequential Create------ --------Random Create--------
10.0.18.6 -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
16 83 99 1607 99 1115 95 87 99 1788 100 305 98
Latency 24155us 2249us 2496us 33010us 1021us 10074us
next reply other threads:[~2002-07-24 0:33 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-07-24 0:09 Jun Sun [this message]
2002-07-24 0:40 ` [PATCH] make PIIX4 ide driver available for MIPS Ralf Baechle
2002-07-24 1:00 ` Zhang Fuxin
2002-07-24 14:43 ` Maciej W. Rozycki
2002-07-24 14:46 ` Ralf Baechle
2002-07-24 14:56 ` Maciej W. Rozycki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3D3DF04E.7070401@mvista.com \
--to=jsun@mvista.com \
--cc=linux-mips@oss.sgi.com \
--cc=ralf@uni-koblenz.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox