Linux MIPS Architecture development
 help / color / mirror / Atom feed
From: Zhang Fuxin <fxzhang@ict.ac.cn>
To: Jun Sun <jsun@mvista.com>
Cc: Ralf Baechle <ralf@uni-koblenz.de>, linux-mips@oss.sgi.com
Subject: Re: [PATCH] make PIIX4 ide driver available for MIPS
Date: Wed, 24 Jul 2002 09:00:48 +0800	[thread overview]
Message-ID: <3D3DFC40.6020300@ict.ac.cn> (raw)
In-Reply-To: 3D3DF04E.7070401@mvista.com

  Algor p6032 board use it too. We have been using native driver for a 
long time.

Jun Sun wrote:

>
> Malta uses this chip. The native driver does provide significant gain 
> in performance. See attached bonnie++ test results.
>
> Two separate patches for both linux_2_4 branch and trunk.
>
> Jun
>
>
>------------------------------------------------------------------------
>
>diff -Nru link/drivers/ide/Config.in.orig link/drivers/ide/Config.in
>--- link/drivers/ide/Config.in.orig	Wed Jun 26 15:35:44 2002
>+++ link/drivers/ide/Config.in	Tue Jul 23 17:03:44 2002
>@@ -72,7 +72,7 @@
>   	    dep_bool '    HPT34X chipset support' CONFIG_BLK_DEV_HPT34X $CONFIG_BLK_DEV_IDEDMA_PCI
> 	    dep_mbool '      HPT34X AUTODMA support (WIP)' CONFIG_HPT34X_AUTODMA $CONFIG_BLK_DEV_HPT34X $CONFIG_IDEDMA_PCI_WIP
> 	    dep_bool '    HPT366/368/370 chipset support' CONFIG_BLK_DEV_HPT366 $CONFIG_BLK_DEV_IDEDMA_PCI
>-	    if [ "$CONFIG_X86" = "y" -o "$CONFIG_IA64" = "y" ]; then
>+	    if [ "$CONFIG_X86" = "y" -o "$CONFIG_IA64" = "y" -o "$CONFIG_MIPS" = "y" -o "$CONFIG_MIPS64" = "y" ]; then
> 	       dep_mbool '    Intel PIIXn chipsets support' CONFIG_BLK_DEV_PIIX $CONFIG_BLK_DEV_IDEDMA_PCI
> 	       dep_mbool '      PIIXn Tuning support' CONFIG_PIIX_TUNING $CONFIG_BLK_DEV_PIIX $CONFIG_IDEDMA_PCI_AUTO
> 	    fi
>
>
>------------------------------------------------------------------------
>
>diff -Nru link/drivers/ide/Config.in.orig link/drivers/ide/Config.in
>--- link/drivers/ide/Config.in.orig	Wed Jul 10 14:04:49 2002
>+++ link/drivers/ide/Config.in	Tue Jul 23 17:06:55 2002
>@@ -70,7 +70,7 @@
>   	    dep_bool '    HPT34X chipset support' CONFIG_BLK_DEV_HPT34X $CONFIG_BLK_DEV_IDEDMA_PCI
> 	    dep_mbool '      HPT34X AUTODMA support (WIP)' CONFIG_HPT34X_AUTODMA $CONFIG_BLK_DEV_HPT34X $CONFIG_IDEDMA_PCI_WIP
> 	    dep_bool '    HPT366 chipset support' CONFIG_BLK_DEV_HPT366 $CONFIG_BLK_DEV_IDEDMA_PCI
>-	    if [ "$CONFIG_X86" = "y" -o "$CONFIG_IA64" = "y" ]; then
>+	    if [ "$CONFIG_X86" = "y" -o "$CONFIG_IA64" = "y" -o "$CONFIG_MIPS" = "y" -o "$CONFIG_MIPS64" = "y" ]; then
> 	       dep_mbool '    Intel PIIXn chipsets support' CONFIG_BLK_DEV_PIIX $CONFIG_BLK_DEV_IDEDMA_PCI
> 	       dep_mbool '      PIIXn Tuning support' CONFIG_PIIX_TUNING $CONFIG_BLK_DEV_PIIX $CONFIG_IDEDMA_PCI_AUTO
> 	    fi
>
>
>------------------------------------------------------------------------
>
>
>==========================
>. bonnie++ test:
>
>With PIIX4 controller code and turnning
>---------------------------------------
>
>Version  1.92       ------Sequential Output------ --Sequential Input- --Random- 
>                    -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks-- 
>Machine        Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP  /sec %CP 
>10.0.18.6      300M    44  99  4969  73  2875  65    65  99  5219  70 117.0  20 
>Latency               186ms     342ms     476ms     138ms   12186us    2550ms   
>Version  1.92       ------Sequential Create------ --------Random Create-------- 
>10.0.18.6           -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete-- 
>              files  /sec %CP  /sec %CP  /sec %CP  /sec %CP  /sec %CP  /sec %CP 
>                 16    83  99  1677 100  1158  98    87  99  1849 100   302  98 
>Latency             25192us    2257us    2009us   45175us    1163us    9985us   
>
>With PIIX4 controller code:
>--------------------------
>
>Version  1.92       ------Sequential Output------ --Sequential Input- --Random- 
>                    -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks-- 
>Machine        Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP  /sec %CP 
>10.0.18.6      300M    44  99  4548  67  2517  56    65  99  5019  69 114.1  20 
>Latency               186ms     436ms    1652ms     147ms   14697us    2418ms   
>Version  1.92       ------Sequential Create------ --------Random Create-------- 
>10.0.18.6           -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete-- 
>              files  /sec %CP  /sec %CP  /sec %CP  /sec %CP  /sec %CP  /sec %CP 
>                 16    83  99  1663  99  1141  98    87  99  1819 100   304  98 
>Latency             32274us    1690us    2826us   37199us    1157us   10074us   
>
>Use PCI generic code
>--------------------
>Version  1.92       ------Sequential Output------ --Sequential Input- --Random- 
>                    -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks-- 
>Machine        Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP  /sec %CP 
>10.0.18.6      300M    44  99  2433  35  1201  26    64  98  3101  44  85.5  14 
>Latency               186ms    4190ms    2722ms     168ms   40544us    1922ms   
>Version  1.92       ------Sequential Create------ --------Random Create-------- 
>10.0.18.6           -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete-- 
>              files  /sec %CP  /sec %CP  /sec %CP  /sec %CP  /sec %CP  /sec %CP 
>                 16    83  99  1607  99  1115  95    87  99  1788 100   305  98 
>Latency             24155us    2249us    2496us   33010us    1021us   10074us   
>
>

  parent reply	other threads:[~2002-07-24  0:53 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2002-07-24  0:09 [PATCH] make PIIX4 ide driver available for MIPS Jun Sun
2002-07-24  0:40 ` Ralf Baechle
2002-07-24  1:00 ` Zhang Fuxin [this message]
2002-07-24 14:43 ` Maciej W. Rozycki
2002-07-24 14:46   ` Ralf Baechle
2002-07-24 14:56     ` Maciej W. Rozycki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3D3DFC40.6020300@ict.ac.cn \
    --to=fxzhang@ict.ac.cn \
    --cc=jsun@mvista.com \
    --cc=linux-mips@oss.sgi.com \
    --cc=ralf@uni-koblenz.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox